Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹9.0 LAccepted-AOC | 1 | Accepted-AOC Lowest Bidder | |
| 2 | 2₹9.0 L+₹1,998.56 (0.22%)Rejected-Finance KERALA | KOLLAM | KERALA | 691504 | 2 | Rejected-Finance Highest Bidder |
Tender Value
₹10.5 L
EMD Value
₹26,250
Closing Date
30 Jun 2020, 5:00 pmClosed
AE,POOYAPPALLY
Assistant engineer , LSGD Section, Pooyappally
CMLRRP-2020-21 Vizhan Aduthala road re tarring in ward no-12 of Pooyappally GP
2020_LSGD_366647_2
01/20-21/AE/LSGD/PPY
Open Tender
Civil Works - Roads
Item Rate
90 days
AE, POOYAPPALLY
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,480
Yes
online
₹26,250
Yes
17 Aug 2020
22 Jun 2020
3 Jul 2020
22 Jun 2020
30 Jun 2020
22 Jun 2020
Amount
Road Tarring
75.5.5.B.2pb : Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
75.5.2.1pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.9.2.2.Pa : Plastic Roads - Bitumen S-65 <br> 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder <br> Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 (with 7% of bitumen replaced by shredded waste plastic) <br> Case - I By Manual Means <br> (II) Bitumen (S-65) (VG - 30)
75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65)
od655008/2020_2021 : Mord: Surface dressing of the ground all kinds of soil including removing vegetation and in-qualities not exceeding 15cm deep and disposal of rubbish, lead up to 50m and lift up to 1.50m
od656401/2020_2021 : od11656/2019_2020 :Construction of plain cement concrete pavement,thickness as per design,over a<br>prepared subgrade / sub base,with 43 grade cement or any other type as per clause 1501 .2.2 M 20<br>(grade),coarse and fine aggregates conforming to lS 383,maximum size of coarse aggregate not exceeding<br>25 mm,mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using<br>approved mix design,laid in approved fixed side formwork (steel channel, wedges,steel plates including<br>levelling the formwork as per drawing),spreading the concrete with shovels,rakes,compacted using needle<br>vibrators and finished in continuous operation including provision of contraction expansion ,construction<br>joints, curing of concrete slabs for 14 days with water finishing to lines and grade as per drawing and<br>Technical Specifications clause 1501( with form work)
od655009/2020_2021 : MoRD:(For Irish Drain)-Plain cement concrete pavment, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 M20(grade), coarse, and fine aggregates confirming to IS 383 , maximum size of course aggregate not exceeding 25mm , mixed in a concrete mixture of not less than 0.2 cum capacity and appropriate weigh batcher using approved mixed design, laid in approved fixed side formwork(Steel, channel, wedges, steel plate including levelling the formwork as per drawing), spreading the concrete with showels , racks, compacted using needle vibratoe and finished in continuos operation including provision of contraction and expansion, construction joints curing of concrete slabs for 14 days , water finishing to lines and grade as per drawing and technical
BRIDGE MAINTANANCE
11.1.1.1 : Excavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.I.Ordinary soil(i)Upto 3 m depth
od725953/2020_2021 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802,803,1202 & 12031.P.C.C grade M10 (i) Nominal mix 1:3:6 (modified 11.4.1.1 form work excluded)
11.4.2.1 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 II.P.C.C grade M 15(i)Nominal mix (1:2.5:5)
11.8 : Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202
12.5.3 : Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204For height upto 5 m III.R.C.C grade M 20
12.7 : Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
od661609/2020_2021 : Mancoolie for specified work
od680506/2020_2021 : Supplying and fixing name board of size 75x60cm installed in appropriate place visible to the public made of brick wall with granite plaque should be inserted and engraving letters etc complete as per direction of dept officers at site<br>
10.4.A.1 : Direction and Place Identification signs with size more than 0.9 sqm size board <br> A. Retro-reflectorised Traffic Signs <br> 1 Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701
SANTHOSH M K
Bidder Name
SANTHOSH M K
Omkaram Constructions
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.PDF
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .