AR and MO LWSS Dudar bharoun and its adjoinig villages in GP Dudar Bharoun Tehsil Sadar Distt Mandi HP

Amount

Excavation in foundation, trenches etc. in earth work lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cm layers, when required, into plinths, sides of foundations, etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 metres in pick jumper work.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1:3:6 (1 cement: 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) in all leads and lifts.

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

Providing and fixing G.I. Chain link fabric fencing of required width in mesh size 25 x 25 mm made of G.I.wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-Charge.

Providing and inserting 12 mm dia galvanised steel injection nipple in honey comb area and along crack line including Compressor, gun, rubber pipes & other accessories- hire charge of plant & machinery i/c necessary fuel, drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Mild steel and Medium Tensile steel bars.

Cutting of Gl Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts.150 mm dia

Welding of Gl pipe of various dia with Diesel Generator welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS standards/approved specifications and to the entire saitsfactioin of the Engineer-in-charge complete in all respect in all leads and lifts.150 mm dia

DINA NATH (BID ID -520271)

NOOR HUSSAIN (BID ID -520296)