Construction of Lab rooms and Studio Room

MASONARY WORK: - Supplying, providing and laying factory made precast concrete solid blocks of 100mm thickness of grade M10 from approved manufacturer with Cement mortar 1:5 (1 cement 5 course sand) Including cost of all materials, Cost of GI wall ties, lead & lift., labour charges, transport charges, curing charges, incidental charges if any complete. Cost should be inclusive of floor chipping or any method of anchoring to floor.

INTERNAL FINISHERS: - Supplying, providing and finishing 15mm thickness cement plaster on both sides of the 100 mm thick block wall with cement mortar mix 1:4 (1 cement 4 Course sand) Including cost of all materials, labour charges, lead & lift, curing charges, transport charges, incidental charges if any complete., as instructed by Engineering In-charge

GYPSUM BOARD PARTITION: - Full height wall Supplying, Installation and fixing Full height 100 mm thick Double skinned partitions wall using thick waterproof Gypsum Board of approved make, with GI frame work as approved as per specifications and as per the instructions of the Engineer-in-charge. The wall should be sound proof with rock wool infill as per approved wall design. Complete in all aspects matching with the existing faculty cabins in 2nd floor of IIITS Academic building including cost of all material, labour charges, Lead & lift, transport and incidental charges if any complete.,

ALUMINIUM PARTITION: - Full Height Wall Design, Supply, Installation and fixing powder coated aluminium Partition with ACP Sheet and Glass as per approved design and material including cost of all material, labour charges, lead & lift, transport and incidental charges if any complete as instructed by Engineering In charge., (Reference image attached in NIT)

DOOR FRAMES; Providing and fixing in position Anodized / Powder coated Aluminium box frame of size 63x38x3 mm thick from JINDAL profile number 20004 from double groove of 1.790 kg per running meter or 20005 from Single groove of 1.777 kg per running meter shaped, planed and fixed with necessary jointing method approved including pins, nails, screws and bolts etc. Rate shall include for cost of bolts, nuts, screws, nails, pins, approved hold fast and grouting for fixing anchor fasteners / coach screws and including painting of approved colour etc. complete as directed shall be approved by PMC as per design calculation and shop drawing of Frames and accessories.

DOOR SHUTTERS (Single leaf): - Providing and fixing of 32mm thick flush door Shutters (Jackson or approved equivalent make) Single leaf of any size; solid core of block board type bonded with phenol formaldehyde synthetic resin thermo-pressed with 8mm thick teak wood external lipping. The construction procedure of the shutter should be as per IS 2202. The shutter should be shop prepared for taking mortise lock or latches, lock block of wood may be provided for fixing the hard ware. The size of block, shall perfectly correspond to the maximum size of lock, covered in IS 2209. All the four edges of the door shutter shall be square. The shutter shall be free from twist or wrap in its plane and of required size Etc. complete as directed Rate shall be include for providing a glass vision panel of size 450 X 450 mm. The 32mm thick fully flush shutter with commercial ply on both sides finished with 1.5mm thick decorative shade laminate including providing an opening with teak wood lipping for fixing the glass vision panel. The door type and shade should match with the doors fixed in the existing faculty cabins in the same floor . Rate shall be including all the required necessary approved hardware / ironmongeries ( Yale/Dorset/Dorma) And all the necessary fixing accessories as shown in the approved shop drawing or as directed. , including cost of all materials, lead & lift, labour charges, transport charges, incidental charges if any complete. Single leaf door 1000 mm X 2100mm

Supplying and fixing of Aluminium Swing door in the Aluminium Partition wall with automatic door closer including cost of all materials, lead, lift, labour charges, tools & plants, transport charges, incidental charges if any complete as per the instruction of the Engineer-in-charge. Rate shall be including all the required necessary approved hardware / ironmongeries (Yale/Dorset/Dorma)

GLASS ETCHING: - Supplying, providing & Fixing glass etching with 3M or Equivalent brand frosted sticker for new faculty room glass with IIIT Logo as per the approved shop drawing and as instructed by the Engineer-in –charge complete including cost of material, lead, lift, Scaffolding, staging, labor charges as per the approval and instruction of the Engineer-in-charge Transport charges etc., complete.

Supplying and fixing of aluminium sliding 2 M X 2M windows of approved size in And all the necessary fixing accessories shown in the approved shop drawing or as directed. , including cost of all materials, Glass lead & lift, labour charges, transport charges, incidental charges if any complete.as instructed by Engineering - Incharge

PAINTING: - Supplying, providing and applying internal painting system over the new gypsum partition walls and new masonry walls ( 1 coat primer + 2 coat Putty + 2 coat of Emulsion paint) , including cost of all materials, lead & lift, labour charges, tools & plants, transport charges, incidental charges if any complete as per the instruction of the Engineer-in-charge

Providing and fixing of Roller Blinds of approved make, shade and texture with supporting frame work and assembly complete as per manufacture specifications including transportation. Complete as per the instructions of Engineer In-charge. Window Size: 2.00m (W) x 2.40m (H) Make: Vista / Hunter Douglas / Equivalent

Supplying, laying, testing and commissioning of 3Rx1.5 sq mm copper wire with suitable PVC conduct or Trunking of approved make in partition wall including necessary junction boxes, bends, elbows etc, in surface/recess system as required the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface and fixing materials and control with 5A switch and front plate accessories Including cost of all materials, lead & lift, labour charges, transport charges etc., complete.as instructed by Engineering -in-charge

Supplying and laying testing and commissioning of 2R x 2.5 sq mm and 1R x 1.5sqmm copper wire with suitable PVC conduct or Trunking of approved make in partition wall including necessary junction boxes, bends, elbows etc, in surface/recess system as required, the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface and fixing materials for Circuit, Including of all materials, lead & lift, labour charges, Transport charges etc., complete, (UPS/RAW-power &Lighting)

Supplying and laying testing and commissioning of 2R x 4 sqmm and 1X2.5sqmm copper wire with suitable PVC conduct or Trunking of approved make in partition wall including necessary junction boxes, bends, elbows etc, in surface/recess system as required, the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface and fixing materials for Circuit, Including of all materials, lead & lift, labour charges, Transport charges etc., complete, (UPS/RAW-power &Lighting)

Supplying, fixing, testing and commissioning of 6A Switch & socket - 2nos with suitable 6M Box of approved make in partition wall including necessary junction boxes, bends, elbows etc, in surface/recess system as required the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface and front plate for UPS power, Including cost of all material, labour charges, lead & lift, Transport charges, etc., complete.,

Supplying, fixing, testing and commissioning of 20A Indicator Switch -1nos with suitable 3M Box and front plate of approved male in partition wall including necessary junction boxes, bends, elbows etc, in surface/recess system as required the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface for UPS power, Including cost of all material, labour charges, lead & lift, Transport charges etc., complete.,

Supplying, fixing, testing and commissioning of 5/15A socket -1nos and 15 A switch – 1 No with suitable 3M Box and front plate of approved make & model in partition wall including necessary junction boxes, bends, elbows etc, in surface/recess system as required the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface for RAW power, Including cost of all material, labour charges, lead & lift, Transport charges etc., complete.,

Supply and fixing, testing and commissioning of LED light fitting of size 600 X 600 mm of approved make with all other necessary accessories, fittings etc., as required. Fittings & luminaires Rate will be inclusive of all supports & Arrangements Including Transport and labor charges Etc., MAKE: Wipro/Panasonic

Supply, fixing, testing and commissioning of AC point 1No ,20A breaker with GI Anodized enclosure and other associated accessories as per the site conditions Including transport Labor charges Etc., complete.

Supplying, fixing, testing and commissioning of celling fan Including cost of all material, labour charges, lead & lift, Transport charges, etc., complete.,The length of the fan rod shall be as per the site conditions and no additional cost shall be paid

Supplying and fixing of Fan Regulator including cost of material and labour, transport, loading, lifting, scaffolding etc as instructed by engineering In charge

Supplying, fixing, testing and commissioning of 6A and switches- and Socket with suitable Modular Box of approved make in partition wall including necessary junction boxes, bends, elbows etc, in surface/recess system as required the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface and front plate for UPS power, Including cost of all material, labour charges, lead & lift, Transport charges, etc., complete.,

Supplying, fixing, testing and commissioning of 6A and switches- with suitable Modular Box of approved make in partition wall including necessary junction boxes, bends, elbows etc, in surface/recess system as required the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface and front plate for UPS power, Including cost of all material, labour charges, lead & lift, Transport charges, etc., complete.,

Supplying and laying of Main CABLE 4 CORE-25 sqmm almond cable including cost of material and labour, transport, loading, lifting, scaffolding etc as instructed by engineering In charge

supplying and fixing of distribution board DB (3 Phase),4 way DB with MCCB & MCB including cost of material and labour, transport, loading, lifting, scaffolding etc as instructed by engineering In charge

Supplying, laying and fixing of CAT6A cable of approved brand including cost of material and labour, lifting, scaffolding etc as instructed by engineering In charge

Supplying and fixing of Rack -2 U (Dlink)of approved brand including cost of material and labour, lifting, scaffolding etc as instructed by engineering In charge

Supplying and fixing of Router TP Link of approved brand including cost of material and labour, lifting, scaffolding etc as instructed by engineering In charge

Supplying and fixing of POE Switch (16 Port)of approved brand including cost of material and labour, lifting, scaffolding etc as instructed by engineering In charge