Rewiring the Electrical Installation in the State Seed Farm, Pathamkulam in Ananganadi Grama Panchayath

Amount

Supply and wiring points using rigid PVC conduit of 20 mm with specials, duly clamped or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping etc.complete with suitable size modular type metal switch boxes, modular type front plates (white) etc.up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete as required.

Single Control light point with 6A,3 plate ceiling rose - Short point (90.2.1.1 )

Single Control light point without ceiling rose - Short point (90.2.1.3 )

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points. (90.2.1.6)

Independent Plug - Short Point ( 90.2.1.7 )

Supply, conveyance installation testing and commissioning the light fittings of following types complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire etc.as required.

1200 mm 1X20W LED Lamp with box type fixture. (90.3.20.3)

Do - directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3core copper conductor flex wire etc.as required.

1200 mm 1X20W LED Lamp with box type fixture. (90.3.22.3)

Supply and fixing cast aluminium stove enamelled bulk head fitting with deep drawn anodised aluminium body,epoxy powder coated,heat resistant prismatic glass cover suitable with 7w LED bulb to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated 3 core round copper conductor flex wire conforming to to relevant ISS or extending the original wiring and making good the surface as required.(od15213/2019_2020)

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of LED Street light fitting IP 65,pressure die-cast housing with induvidual LEDs with modular secondary optics 25watts with driver and including all necessary all accessories etc in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire etc. as required - BAJAJ make BRLEP25W LED/Endura Citylite Platinum 25 LED/Osram strada plus/ phillips make.(od20530/ 2019_2020)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps.(90.3.18.1)

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm Plastic shade and 7 W LED lamp and giving connection etc as required. (od15215/2019_2020)

Supply,conveyance,installation,testing and commissioning of 400 mm sweep (16") Almonard supreme high speed wall mounting fan of all types using mounting brackets supplied along with the fan and giving connection including all charges.

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required. 20 mm dia light gauge. (od15219/2019_ 2020)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq.mm 2 Run (1.17.2)

2.50 sq.mm 2 Run (1.17.11)

4.00 sq.mm 2 Run (1.17.20)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 3Module (100mmX75mm) (1.27.2)

Do - 8 Module (125mmX125mm) (1.27.5)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet.(1.24.5)

Do - Do - 15/16 amp switch. (1.24.3)

Do - Do - 3 pin 5/6 amp socket outlet. (1.24.4)

Do - Do - 5/6 amp switch. (1.24.1)

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board,240v,on surface/ recess,complete with tinned copper bus bar, neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator,12 way Double door.(2.3.3)

Supplying and fixing following rating,double pole,240volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required.40 amps. (2.12.1)

Do - double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps (2.14.1 )

Do - 5 amps to 32 amps rating, 240/415 volts, "C" curve, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. (2.10.1 )

Supply,Providing and fixing 32 Amp DP SDF disconnector fuse switch unit in sheet steel enclosure with ISI marked HRC fuses on wall/angle iron frame including drilling holes in frame, making connections etc.as required. od568086/ 2019_2020

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2 metre long etc. with charcoal/coke and salt as required. (od8860/2018_2019)

Providing and fixing 25mmx3mm G.I strip earth lead from the test joint to the earth plate. (od14961/2019_2020)

Providing and fixing testing joint, made of 2 X 25 mm X 3 mm thick G.I. strip, 30 mm long, with 2 nos. of brass. bolts, nuts, chuck nuts and spring washers etc. complete as required.(od4503/2019_2020)

Supply and drawing bare earthing conductors of the following sizes along with wiring / cables and giving connection as required. 2.00mm copper conductor (14 SWG) (od70986/ 2018_2019)

3.15 mm copper conductor (10 SWG) (od8853/2018 _ 2019)

Supply and laying bare earthing conductors of the following sizes laid 0.60 m below ground level including excavating trench of suitable size and refilling etc.as required (in ordinary soil) 3.15mm copper conductor. (10SWG) (od21872/2019_ 2020)

Suplying,threading,laying and jointing of 15mm B class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads. (od8853/ 2018_19)

Supply of superior quality 2.00mm (14SWG) copper earth socket and including crimping etc.as required. (od69264/2018_2019)

3.15 mm copper conductor (10 SWG) (od69266/2018_ 2019)

Supply and providing12x3mm brass nut and bolt etc.as required.(od21888/2019_2020)

Do - 25 x 6 mm brass bolt & nut etc.as required. (od14951/ 2019_2020)

Supply & installation of dust and vermin proof, 1 Phase Sintex Meter Board( GS-MB- 3525 (350x250x150)) including p/f 32 A HRC Fuse Base with HRC Fuse link ,32 A neutal link and to fix KSEB meters, etc as required including fixing it on wall, making good the damages colour washing etc. as required. (od14963/ 2019_2020.)

Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps. (90.3.18.1) For Srevice Pipe.

Supply and providing M8 anchor bolt hook in wall / parapet for binding support for service main.

Charges for dismantling the existing fan/light fittings complete,making good the damages of walls and conveying the dismantled materials to store.

SHAHUL HAMEED K P

SMITHESH OJ

Bidder Name

SMITHESH OJ

Electro Guard Power Solutions

SHAHUL HAMEED K P