COST OF RENOVATION OF STAFF QUARTERS NO 3 IN THENMALA RANGE DURING 2022-23

Amount

15.28.2 Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos Sheet

10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

od199413/2021_2022 Providing at all heights, levels and locations Insulated composite Roofing panel of 50 mm overall thickwith sandwich Polyurethane(PU) foam, sandwiched between lower layer of 0.40mm thick and upper layer of 0.50mm thick of superior quality pre painted Galvalume sheet .The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5 x 100 mm with EPDM seal complete up to required pitch in horizontal, vertical or curved surfaces i/c cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealent where required etc. but excluding the cost of purlins, rafters and trusses.

15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

13.1.2 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

6.1.2 Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.98.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work.

13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od199557/2021_2022 Labour engaged for petty repair work of doors and windows.(Beldar)

od199558/2021_2022 Labour engaged for petty repair work of doors and windows ( Carpenter 2nd class)

od199559/2021_2022 Labour engaged for plumbing repair works.Fitter(grade1)

od199560/2021_2022 Labour engaged for repair works.Coolie

od199561/2021_2022 Labour engaged for repairing masonry work.Mason (brick layer )2nd class

16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc.all complete as per the direction of Engineer - in- charge.

50.17.1.4 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

MINOR ELECTRIFICATION WORK ( Allotted Amount- 5000/- - LS)

For minor plumbing materials like bend, coupling, sheet etc. ( Allotted Amount - 1500/-LS)

K.Sasidharan

C.SAJIKUMAR

SHIBU S