DMF Funds

Demolishing including stacking of serviceable materials and disposal of unserviceable materials within 1000m lead

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).for foundations of buildings

Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of T&P etc., complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402)

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for footings

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work Columns Footings

Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402)

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc., complete for finished item of work in foundation and basement. (APSS No. 601 & 615)

Filling in foundation with Carted Natural gravel trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Plinth beam

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work For Roof Level Beams

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering For Roof Slab 125 mm thick

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

RCC M- 30 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges ,Seigniorage charges for finished item of work, including centering, shuttering. for Lintels

RCC M- 30 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges ,Seigniorage charges for finished item of work, including centering, shuttering. for sun shades

Ornamental plastering to ceiling 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc. complete for finished item of work. (APSS No. 501 & 504).

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete for finished item of work. (SS 901,903 & 904)

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, fine sand (screened), water, etc., to site, and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc.excluding VAT and seigniorage charges and including overhead charges as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for EXTERNAL faces of walls

Plastering 20mm thick single coat in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, fine sand (screened), water, etc., to site, and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc.excluding VAT and seigniorage charges and including overhead charges as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for EXTERNAL faces of walls

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knife paste filler by putty knife/ muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No. emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls.

Supply and application of one coat water based cement primer of INTERIOR GRADE 1 and two coats of acrylic emulson paint having VOOC (Volatile Organic Compound) content less than 50 grams/litres for internal walls includig cost and conveyance of all material and labour charges and taxes and etrc... complete

Supply and application of one coat water based cement primer of EXTERIOR GRADE 2 and two coats of acrylic emulson paint having VOOC (Volatile Organic Compound) content less than 50 grams/litres for internal walls includig cost and conveyance of all material and labour charges and taxes and etrc... complete

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials.

Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Providing dadooing to internal walls to 15 cm height/risers of steps with 7.30 mm thick Ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Supply and fixing of Teak wood Door Double shutter fully pannlled door of size 1.20 x 2.10mt with frame made of well seasoned teak wood scantlings of size 100 x 75mm mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and panels - 8 no's are of 25mm thick as per approved design with fixtures MS Powder coated with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) but excluding VAT

Supply and fixing of Unplasticised Poly Chloride (UPVC) sliding windows three track sliding duly manufactured using UPVC reinforsed profiles of (62mmx60mm) (60mmx 45mm) x2.0mm for outer frames,(66mmx38mm)58mm x 39mm) x2.0mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm prefabricated &welded through fusionwelding the window sash shall be fitted with 5mm thick clear float glass of reputed make duly fixed with TPV gasket/EPDM weathering seal resistent accessories like locking system 1No ., Per set of sashes and the system is to be installed at the site etc., including cost and conveyence of all materials,accessories ,labour charges for transportation,erriction at site with templates for casement windows sizing complete for finished item of work

Providing Mild steel flats and bars for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, all operational, incidental, and labour charges such as cutting, bending, placing in position etc., and sales & other taxes, on cost of all materials complete for finished item of work (APSS No.126) in all floors. For window grills, staircase railing & Compound wall grills etc

ELECTRIFICATION

Supply and Fixing of 25mm dia1.80mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and fixing of 6 Amps modular type switch and 6A 2/3/5 pin modular type socket with cover plate on a common switch board including given all connections and including wire leads, earth connections along with all labour charges etc., complete.

Wiring with 2 of 22/0.3mm (1.5 Sq.mm) Seperate board with 6A modular type switches and 6A 3/2 pin modular type socket with cover plate fixing on existing,seperate modular switch box of FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe including all labour charges etc..,. completed.

Supply and fixing of 3 no. of 6A modular type switches with 3 no of 6A, 3/2 pin modular type socket with cover plate on suitable hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc..,. complete for LABs & Computer use.

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and fixing of batlen holder light / angle holder light on existing block with 5W LED Lamp with input voltage 90 to 300V Colour temperature 3000K - 6500K Beak angle 170 - 220 degrees B22 base and including all labour charges, giving all connections ceiling rose etc..,. complete

Supply and fixing of 20-24W not less than 1100mm length LED batten light with extruded alluminimum / CRCA housing and polycorbonate cover input voltage AC 220V - 260 Volts with PF>0.9. Surge protection: 2KV THD<15%. With high power LEDs having efficacy of 120 lumens / watt with inbult and replaceable drivers with each connections brought outside and frosted cover CCT: 3000K - 5700K,Munimum CRI>70 etc.., complete including fixing on wall / ceiling with PVC / TW round blocks with all accessories including giving connections and all labour charges etc. completed...,

Supply and Transportation of 48'' (1200 mm) sweep 5star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter / min but without regulator.

Supply and Fixing of Modular type 2-module Electric fan regulator hum free step type socket size in the existing switch board.

Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads

Supply and erection of 7/20 Service Wire (10 sqm WPTC) etc.., completed

Supply and transportation of 12'' (300mm) 900 rpm heavy duty exhaust fan with metallic blades with mark.

Labour Charges forfixing of 12'' (300mm) 900 rpm heavy duty exhaust fan with metallic blades with necessary connections and massionary work.

Supply and fixing SPN 8 - way Distribution board with IP-43 protection and as per is 8623 with provision to accommadate the RCCB & DP MCB as incorner and suitable for single pol outgoing MCB's in sheel steel enclosure with 40A 40KA breaking capacity 'c' curve 2 pole MCB with 40A, 30ma 2pole RCCB as incorner and 6 no of 6 to 32A single pole, 10 KA breaking capacity 'C' curve MCB's as outgoing including making connections etc.., completed.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply transportation and fixing of 30w LED Street light luminire made of pressure diecast alluminium body with powder coated having protective toughned glass, supply input voltage 120-270 v AC, P.F>0.90, high power LED's having system efficiency >100 im/W and junction temperature < 70˚C, with ingress protection 4KV, external surge protection 10 KV with optics distribution, THD< 10% at 110 volts AC, driver efficiency >90%, CCT:3000K-5700K, minimum CRI>70,etc.., completed

Supplying and fixing of Indian make Flat Hand Wash Basins 1st quality of size 550mm x 400mm with 32mm nominal size cp fitting with perellel pite threading and fitting with 15mm nominal borechromium plated piller tap 1st quality duty complete with standered C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Labour charges only for fixing Indian make flat Back Wash Hand Basin with waste fittings like rubber plug,chain,32 mm nominal size C.P.fitting pillar taps complete with standard CI brackets etc

Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Labourcharges only for fixing European water closet with P or S trap as per standard practice

S & F 12.7 mm heavy duty NP Swan Neck Pillar cock

Labour charges for Neck Pillar cock

Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work. GATE VALVE-BMWF.17

Labourcharges for fixing Gate valve

Supplying and fixing of SWR PVC pipes (as per ISI standards) 4kg/Sq.cm and fixing all special such as plain bends, Off sets, door bends, single junctions,double junctions as per site requirement, fixing with PVC clamps if necessary with required numbedr of Bombay nails including cost and conveyance of all materials to site, labour charges etc.,complete for finished item of work at all floor levels(APSS No.1302, 1319 & 1326)

Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces overheads & contractors profit complete.for finished item of work in all floors.Ground floor:BMW-I.119

Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces overheads & contractors profit complete.for finished item of work in all floors.Laourchages for fixing only

Supplying and fixing of premium make UPVC/CPVC/PVC pipes abd fitting to meet the requirement of ASTM-D 2846 and produced in cts copper tube size 1/2'' to 2'' made from identital CPVC compounds having the phycical proper hot and cold water.

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.WATER TANKER Laourchages for fixing only

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.

Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply a

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & OG Soils ( SS 20-B) including all operational incidental l/c such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work including seignerage charges excluding dewatering charges etc., complete for Septic tank soak pit and sump.(APSS No. 308)

Plain Cement Concrete (1:5:10) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but excluding unskilled wages etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)(CSSR)

Plain Cement Concrete M 20 grade nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work

Brick Masonary for Basement with CM (1:8) proportion using 2nd class traditional bricks of size 23X11X7 cms having minimum crushing strength of 35kg/cm2 including cost and conveyance of all materials like Cement, Sand, Bricks, water etc including seigniorage, sales and other taxes on all materials including all operational, incidental and labour charges such as mixing cement mortar , Scaffolding charges, etc complete for finished item of work (APSS No 501 & 504)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete for finished item of work. (SS 901,903 & 904)

Reinforced Cement Concrete M-20 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work

Supplying and fixing of 110mm dia SWR/ PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work

Supply and erecting, ISI mark submersible 1.50 HP,Single Phase 15stages pumpset suitable for 106 / 156mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of Single phase 250V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength.

Fabrication transportation and supply of suitable size panel board of single phase submersible motors up to 1.50hp consisting of realy contractor starting and running capacitors voltmeter ammeter indicator lamp, MCB on/off switch including supply and fixing of DOL starter of complete..,

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammerdrilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Cost and supply of PVC casing pipe 6kg/sqcm of 250 mm dia including all Materials and all Labour charges taxes etc.,

Cost and supply of PVC casing pipe 6kg/sqcm of 180 mm dia including all Materials and all Labour charges taxes etc.,

Cost and supply of PVC Casing pipe 6kg/sqcm of 140 mm dia including all Materials and all Labour charges taxes etc.,

Labor Charges for slotting of pipe

Supply and Delivery of 63 mm dia HDPE pipe of 10-12 kg/cm2 including cost and conveyance of all materials and all labour charges etc.,

Supply of PVC insulated 3 core 2.5 Sqmm sheathed flexible copper cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR Kable. ELEC-1.6.3

Providing Bore Cap

(No.of items 83) only

Demolishing including stacking of serviceable materials and disposal of unserviceable materials within 1000m lead

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).for foundations of buildings

Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of T&P etc., complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402)

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for footings

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work Columns Footings

Plain Cement Concrete corresponding to grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402)

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc., complete for finished item of work in foundation and basement. (APSS No. 601 & 615)

Filling in foundation with Carted Natural gravel trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work for Plinth beam

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work For Roof Level Beams

Reinforced Cement Concrete M-30 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering For Roof Slab 125 mm thick

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

RCC M- 30 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges ,Seigniorage charges for finished item of work, including centering, shuttering. for Lintels

RCC M- 30 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges ,Seigniorage charges for finished item of work, including centering, shuttering. for sun shades

Ornamental plastering to ceiling 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc. complete for finished item of work. (APSS No. 501 & 504).

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete for finished item of work. (SS 901,903 & 904)

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, fine sand (screened), water, etc., to site, and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc.excluding VAT and seigniorage charges and including overhead charges as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for EXTERNAL faces of walls

Plastering 20mm thick single coat in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, fine sand (screened), water, etc., to site, and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc.excluding VAT and seigniorage charges and including overhead charges as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for EXTERNAL faces of walls

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knife paste filler by putty knife/ muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No. emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls.

Supply and application of one coat water based cement primer of INTERIOR GRADE 1 and two coats of acrylic emulson paint having VOOC (Volatile Organic Compound) content less than 50 grams/litres for internal walls includig cost and conveyance of all material and labour charges and taxes and etrc... complete

Supply and application of one coat water based cement primer of EXTERIOR GRADE 2 and two coats of acrylic emulson paint having VOOC (Volatile Organic Compound) content less than 50 grams/litres for internal walls includig cost and conveyance of all material and labour charges and taxes and etrc... complete

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials.

Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Providing dadooing to internal walls to 15 cm height/risers of steps with 7.30 mm thick Ceramic tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Supply and fixing of Teak wood Door Double shutter fully pannlled door of size 1.20 x 2.10mt with frame made of well seasoned teak wood scantlings of size 100 x 75mm mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and panels - 8 no's are of 25mm thick as per approved design with fixtures MS Powder coated with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) but excluding VAT

Supply and fixing of Unplasticised Poly Chloride (UPVC) sliding windows three track sliding duly manufactured using UPVC reinforsed profiles of (62mmx60mm) (60mmx 45mm) x2.0mm for outer frames,(66mmx38mm)58mm x 39mm) x2.0mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm prefabricated &welded through fusionwelding the window sash shall be fitted with 5mm thick clear float glass of reputed make duly fixed with TPV gasket/EPDM weathering seal resistent accessories like locking system 1No ., Per set of sashes and the system is to be installed at the site etc., including cost and conveyence of all materials,accessories ,labour charges for transportation,erriction at site with templates for casement windows sizing complete for finished item of work

Providing Mild steel flats and bars for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, all operational, incidental, and labour charges such as cutting, bending, placing in position etc., and sales & other taxes, on cost of all materials complete for finished item of work (APSS No.126) in all floors. For window grills, staircase railing & Compound wall grills etc

Supply and Fixing of 25mm dia1.80mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and fixing of 6 Amps modular type switch and 6A 2/3/5 pin modular type socket with cover plate on a common switch board including given all connections and including wire leads, earth connections along with all labour charges etc., complete.

Wiring with 2 of 22/0.3mm (1.5 Sq.mm) Seperate board with 6A modular type switches and 6A 3/2 pin modular type socket with cover plate fixing on existing,seperate modular switch box of FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe including all labour charges etc..,. completed.

Supply and fixing of 3 no. of 6A modular type switches with 3 no of 6A, 3/2 pin modular type socket with cover plate on suitable hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc..,. complete for LABs & Computer use.

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and fixing of batlen holder light / angle holder light on existing block with 5W LED Lamp with input voltage 90 to 300V Colour temperature 3000K - 6500K Beak angle 170 - 220 degrees B22 base and including all labour charges, giving all connections ceiling rose etc..,. complete

Supply and fixing of 20-24W not less than 1100mm length LED batten light with extruded alluminimum / CRCA housing and polycorbonate cover input voltage AC 220V - 260 Volts with PF>0.9. Surge protection: 2KV THD<15%. With high power LEDs having efficacy of 120 lumens / watt with inbult and replaceable drivers with each connections brought outside and frosted cover CCT: 3000K - 5700K,Munimum CRI>70 etc.., complete including fixing on wall / ceiling with PVC / TW round blocks with all accessories including giving connections and all labour charges etc. completed...,

Supply and Transportation of 48'' (1200 mm) sweep 5star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter / min but without regulator.

Supply and Fixing of Modular type 2-module Electric fan regulator hum free step type socket size in the existing switch board.

Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads

Supply and erection of 7/20 Service Wire (10 sqm WPTC) etc.., completed

Supply and transportation of 12'' (300mm) 900 rpm heavy duty exhaust fan with metallic blades with mark.

Labour Charges forfixing of 12'' (300mm) 900 rpm heavy duty exhaust fan with metallic blades with necessary connections and massionary work.

Supply and fixing SPN 8 - way Distribution board with IP-43 protection and as per is 8623 with provision to accommadate the RCCB & DP MCB as incorner and suitable for single pol outgoing MCB's in sheel steel enclosure with 40A 40KA breaking capacity 'c' curve 2 pole MCB with 40A, 30ma 2pole RCCB as incorner and 6 no of 6 to 32A single pole, 10 KA breaking capacity 'C' curve MCB's as outgoing including making connections etc.., completed.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply transportation and fixing of 30w LED Street light luminire made of pressure diecast alluminium body with powder coated having protective toughned glass, supply input voltage 120-270 v AC, P.F>0.90, high power LED's having system efficiency >100 im/W and junction temperature < 70˚C, with ingress protection 4KV, external surge protection 10 KV with optics distribution, THD< 10% at 110 volts AC, driver efficiency >90%, CCT:3000K-5700K, minimum CRI>70,etc.., completed

Supplying and fixing of Indian make Flat Hand Wash Basins 1st quality of size 550mm x 400mm with 32mm nominal size cp fitting with perellel pite threading and fitting with 15mm nominal borechromium plated piller tap 1st quality duty complete with standered C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Labour charges only for fixing Indian make flat Back Wash Hand Basin with waste fittings like rubber plug,chain,32 mm nominal size C.P.fitting pillar taps complete with standard CI brackets etc

Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Labourcharges only for fixing European water closet with P or S trap as per standard practice

S & F 12.7 mm heavy duty NP Swan Neck Pillar cock

Labour charges for Neck Pillar cock

Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work. GATE VALVE-BMWF.17

Labourcharges for fixing Gate valve

Supplying and fixing of SWR PVC pipes (as per ISI standards) 4kg/Sq.cm and fixing all special such as plain bends, Off sets, door bends, single junctions,double junctions as per site requirement, fixing with PVC clamps if necessary with required numbedr of Bombay nails including cost and conveyance of all materials to site, labour charges etc.,complete for finished item of work at all floor levels(APSS No.1302, 1319 & 1326)

Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces overheads & contractors profit complete.for finished item of work in all floors.Ground floor:BMW-I.119

Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces overheads & contractors profit complete.for finished item of work in all floors.Laourchages for fixing only

Supplying and fixing of premium make UPVC/CPVC/PVC pipes abd fitting to meet the requirement of ASTM-D 2846 and produced in cts copper tube size 1/2'' to 2'' made from identital CPVC compounds having the phycical proper hot and cold water.

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.WATER TANKER Laourchages for fixing only

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.

Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply a

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & OG Soils ( SS 20-B) including all operational incidental l/c such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work including seignerage charges excluding dewatering charges etc., complete for Septic tank soak pit and sump.(APSS No. 308)

Plain Cement Concrete (1:5:10) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but excluding unskilled wages etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)(CSSR)

Plain Cement Concrete M 20 grade nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work

Brick Masonary for Basement with CM (1:8) proportion using 2nd class traditional bricks of size 23X11X7 cms having minimum crushing strength of 35kg/cm2 including cost and conveyance of all materials like Cement, Sand, Bricks, water etc including seigniorage, sales and other taxes on all materials including all operational, incidental and labour charges such as mixing cement mortar , Scaffolding charges, etc complete for finished item of work (APSS No 501 & 504)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete for finished item of work. (SS 901,903 & 904)

Reinforced Cement Concrete M-20 Design mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for finished item of work

Supplying and fixing of 110mm dia SWR/ PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work

Supply and erecting, ISI mark submersible 1.50 HP,Single Phase 15stages pumpset suitable for 106 / 156mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of Single phase 250V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength.

Fabrication transportation and supply of suitable size panel board of single phase submersible motors up to 1.50hp consisting of realy contractor starting and running capacitors voltmeter ammeter indicator lamp, MCB on/off switch including supply and fixing of DOL starter of complete..,

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammerdrilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Cost and supply of PVC casing pipe 6kg/sqcm of 250 mm dia including all Materials and all Labour charges taxes etc.,

Cost and supply of PVC casing pipe 6kg/sqcm of 180 mm dia including all Materials and all Labour charges taxes etc.,

Cost and supply of PVC Casing pipe 6kg/sqcm of 140 mm dia including all Materials and all Labour charges taxes etc.,

Labor Charges for slotting of pipe

Supply and Delivery of 63 mm dia HDPE pipe of 10-12 kg/cm2 including cost and conveyance of all materials and all labour charges etc.,

Supply of PVC insulated 3 core 2.5 Sqmm sheathed flexible copper cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR Kable. ELEC-1.6.3

Providing Bore Cap