Bid Documents for Construction of Aspirational Toilet Block At.Bareja Nagarpalika, Bareja under SBM 2.0, Dist:- Ahmedabad

Description Estimated Cost Tender Cost

B Construction of Aspirational Toilet Block, At.Bareja

I/We am/are willing to carry out the work at… % above/below percent (Should be written in figures and words) of the

estimated rate mentioned above. Amount of my/our tender works out as under Estimated amount put to tender

Estimated amount put to tender Deduct………% below Add………% Above

In words In words………………….

The 18% GST will be Paid Separately for the tender rate shown in the Schedule B

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer‐In‐ Charge

for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

Signature of Contractor Signature of Chief Officer

BAREJA NAGARPALIKA, BAREJA

Bareja Nagarpalika, Bareja

Name of Project :- Bid Documents for Construction of Aspirational Toilet Block At.Bareja

Nagarpalika, Bareja under SBM 2.0, Dist:- Ahmedabad

Name of Work : Construction of Aspirational Toilet Block, At.Bareja

Description of Item Qty. Unit Rate Amount

Excavation for foundation upto 1.5 m depth including sorting

out and stacking of useful materials and disposing off the 107.00 Cu.mt. 117.08

excavated stuff upto 50 Meter lead. (A) Loose or soft soil

Excavation for foundation up to 1.5M to 3.0M Depth including

sorting out and stacking of useful materials and disposing of the 58.00 Cu.mt. 129.81

excavated stuff up to 50 meter lead.

Providing and laying cement concrete 1:4:8 (1-Cement : 4-

coarse sand : 8-hand broken stone aggregates 40mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4-graded stone aggregates 20mm nominal size)

and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A) Foundations, 14.00 Cu.mt. 4280.42

footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (D) Columns, 9.00 Cu.mt. 4639.85

Pillars posts and struts, upto floor two level.

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (C) Slabs, 13.00 Cu.mt. 4541.03

landing, shelves, Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level.

Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (C) Slabs, 12.00 Cu.mt. 4504.96

landing, shelves, Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level.

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A) Wall

BAREJA NAGARPALIKA, BAREJA

Filling availabale excavated earth (excluding rock) in trenches

plinth, sides of founadions etc. in layers not exceeding 20cm in

depth consolidating each deposited layer by ramming and

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited layer

by ramming and watering. 37.00 Cu.mt. 259.67

Add extra for Disposing off the excavated stuff of above items

for lead of (E) 400 to 500 m

Providing and laying ordinary cement concrete 1:2:4 (1-

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth 2.00 Cu.mt. 8720.79

with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) for reinforced concrete Chhajjas not exceeding 10cm.

thickness upto floor two level including finishing the exposed 2.00 Cu.mt. 6551.94

surfaces with cement mortar 1:3 (1cement, 3 Fine sand) to give

a smooth and even surface centering and formwork and curing

complete excluding cost of reinforcement.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto 5863.00 Kg. 76.21

floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly

Ash Bricks 45.00 Cu.mt. 5064.49

Extra for brick work in superstructure above plinth level upto

floor two level(C) Fly Ash Bricks

(i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and

plinth (C)Fly Ash Bricks 68.00 Smt. 733.26

Extra for half brick masonry in superstructure above plinth level

upto floor two level. (C)Fly Ash Bricks

BAREJA NAGARPALIKA, BAREJA

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and

propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of 23.00 Smt. 173.40

the same for in situ reinforced concrete and plain concrete work

in. (A) Foundations Footings Bases of Columns etc. and Mass

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and

propping etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal of

the same for in situ reinforced concrete and plain concrete work

in. (B) Flat surfaces such as soffits of supspened floors slabs

Landings and the like. (1) Floors etc. upto 200 mm in

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and

propping etc. height of propping and centering below supporting

floor to ceiling not exceeding 4 M. and removal of the same for 102.00 Smt. 300.66

in situ reinforced concrete and plain concrete work in. (G)

Columns PillarsPosts and struts. (1) Square Rectangular

Polygonal in plan.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and

propping etc. height of propping and centering below supporting

floor to ceiling not exceeding 4 M. and removal of the same for 132.00 Smt. 194.07

in situ reinforced concrete and plain concrete work in. (H) (1)

Sides and soffits of Beams Beam Haunchings cantilevers Girders

Bressumers and Lintels not exceeding 1 M. in Depth.

Providing formwork of ordinary timber planking so as to give a

rough finish including centering shuttering strutting and

propping etc. height of propping and centering below supporting

floor to ceiling not exceeding 4 M. and removal of the same for 5.00 Smt. 68.41

in situ reinforced concrete and plain concrete work in. (I) Edges

of slabs and Breaks in floors and walls.

Providing and fixing in position collapsible steel shutters with

vertical channels 20 x 10 x 2 mm braced with flat iron diagonals

20 x 5 mm size with top and bottom rails of T_rin 40x 40 x

mm with 38mm dia, steel pulleys complete with bolts, nuts, 11.00 Smt. 5533.68

locking arrangements, stoppers handles including applying a

priming coat of red lead paint.

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts 202.00 Kg. 101.17

and nuts or by screws (A) Plain Grill.

BAREJA NAGARPALIKA, BAREJA

Providing and fixing FRP frame size 125x65 mm and 35mm

thick FRP shutter with wood grain raised panneled design finish

shutter having extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fintures. The

whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with fastener sleeve & alluminium

fixtures & fastenings.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed 24.00 Smt. 1397.83

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with 70.00 Smt. 992.66

pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Providing and layingCeramic tiles 6mm thick in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 146.00 Smt. 1038.39

3-coarse sand) and jointed with white cement slurry

Providing and laying polished kota stone slab 25mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with 4.00 Smt. 1187.79

gray cement slury mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete.

Providing and laying Marble Slab Polished granite stone 20 to

25mm thick black 3.00 Smt. 2567.79

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles to

be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using 92.00 Smt. 747.29

white cement including rounding off junctions and extending

them upto 15 cm along the all,clearing with water and oxalic

acid etc. as directed.

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement mortar 1:4 (1- 233.00 Smt. 115.81

cement :4-sand)

BAREJA NAGARPALIKA, BAREJA

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement mortar 1:4 (1-

cement :4-sand) 105.00 Smt. 140.62

Extra over items 58 to 71 for plastering on ceilings and sofits of

stairs upto floor two level instead of plastering on walls.

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing 154.00 Smt. 300.66

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains 154.00 Smt. 114.53

of loose powdered materials. etc complete

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from 338.00 Smt. 40.59

mortar dropping and other foreign matter and sand papered

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface 338.00 Smt. 79.22

free from mortar droppings and other foreign matter and sand

papered smooth.

Anti-Termite System:Providing and laying of permanent piping

technology anti-termite treatment before flooring work by

installing LLDP (Low linear density polyethylene) tube of 8 mm

O.D. & 6.4 mm 1.D. with inbuilt pressure compensation chip

every 30 cm interval in the tube, having working pressure of

Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and

nails. The LLDP pipe shall be installed at the entire periphery of

the building and at internal network of building at a depth of

to 200 mm under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout ) & Ends of loop pass through a

PVC elbow of minimum 32 mm ID at junction box of wall and

floor level, entering into a steel reinforced grooved flexible pipe 89.00 Smt. 63.63

of minimum 22 mm ID leading into junction box and the loops

shall terminate in junction boxes & test every junction during

injecting chemicals for termite control treatment. The anti

termite chemical Imidacloprid 30.5% SC mix as per IS-6313

(part III) shall be injected by the pressure pump diluted with

water @ 10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @

Ltr/SMT. The contractor shall submit approved line plan for

piping system and junction boxes dully approved by Engineer in-

Charge with bond of 5 year warranty.(i)Anti Termite chemical

injected area (Chemical injecting incl. labour cost)

BAREJA NAGARPALIKA, BAREJA

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside Dia.

Low densidy, complete with special falnge compression type

fittings, wall clipsetc. including making good the wall ceiling and

floor. (G)110 mm

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. 250.00 Rmt 333.66

nominal bore tube fitting and clamps including making good the

wall, ceiling and floor etc. complete. [B] 32 mm

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. 150.00 Rmt 249.72

nominal bore tube fitting and clamps including making good the

wall, ceiling and floor etc. complete. [C] 25 mm

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. 30.00 Rmt 653.77

nominal bore tube fitting and clamps including making good the

wall, ceiling and floor etc. complete. [C] 50 mm

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. 80.00 Rmt 166.86

nominal bore tube fitting and clamps including making good the

wall, ceiling and floor etc. complete. [C] 15 mm

Providing and fixing in position cowel vent to pipes. (C)

Providing and fixing ball cock of approved. quality as

directed.(B) Abonite (ii) 50mm dia.

Providing and fixing Urinal with accessories set 6.00 Each 5803.22

Providing and fixing Auto closing concealed Urinal flush valve

Providing and fixing Rimless wall hung WC with UF soft close

PROVIDING & FIXING WALL HUNG WC WITH UF SOFT CLOSING

Providing and fixing hand shower (health faucet) with 8mm dia

PROVIDING & FIXING WALL HUNG WC WITH UF SOFT CLOSING

Providing and fixing 2 way BIB cock with wall flange 12.00 Each 1925.84

Providing and fixing Metropole flush valve regular 40mm size

BAREJA NAGARPALIKA, BAREJA

Providing and fixing GRAB BAR VERTICAL SWING 2.00 Each 3594.91

Providing and fixing GRAB BAR 680MM LONG 2.00 Each 1283.89

Providing and fixing Single lever exposed parts kit if hi-flo 5.00 Each 1797.46

Providing and fixing Overhead shower 120mm dia round shape

Providing and fixing Shower aem with wall flange 5.00 Each 385.16

Providing and fixing Under counter basin, size:

PROVIDING & FIXING WASTE COUPLING 32MM

SIZE HALF THREAD WIT

PROVIDING & FIXING BOTTLE TRAP (WITH INTERNAL

PROVIDING & FIXING FLASH TOUCH-FREE INFRARED HAND

PROVIDING & FIXING PRESSMATIC WALL MOUNTED BASIN TAP

PROVIDING & FIXING SOAP DISPENSER AUTOMATIC CAPACITY:

Providing and fixing 600mm x 450mm bevelled edge mirrror of

superior glass mounted on 6mm thick A.C. sheet or plywood

sheet and fixing to wooden pluge with C.P. brass screws and

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed down

or higned grating including cost of cutting and making good the 23.00 Each 606.08

walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia.

Providing and laying Cement concrete 1:5:10 (1-Cement : 5-

Fine sand :10-Graded stone aggregate 40mm nominal size)

bedding for stoneware pipes of following internal diameters with 50.00 Rmt. 213.71

necessary formwork and curing complete.(B) 150mm dia.

(166mm Ave. bed thickness)

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints 50.00 Rmt. 213.16

complete.(B) 100mm dia.

Providing and fixing cast iron spigot and socket soil, waste and

ventilating pipes of the following nominal size.(B) 75mm dia. 60.00 Each 739.41

Providing and fixing C.P. brass waste for washbasin or sink. (A)

32mmdia. 4.00 Each 67.91

BAREJA NAGARPALIKA, BAREJA

Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc. complete.(A)

White earthenware flat back or corner type size 430mm x

Extra over item 24.1 for providing salt Glazed stoneware

fittings. (i) Bends of required degree (any redious) of 12.00 Each 56.17

following nominal diameters. (A) 100mm dia.

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square 20.00 Each 1292.19

mouth traps. (A) 100mm x 100mm size P type.

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared 50.00 Rmt. 348.04

for collar joints including testing of joints complete. (C) 250mm

Constructing Manhole with R.C.C. top slab in 1:2:4 mix

(1cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1Cement : 3-coarse sand)

finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse

sand :4-stone aggregate 20mm nominal size) finished smooth

complete including curing and festing (i) Inside size 900mm x 1.00 Each 19330.46

1200mm and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A)

With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement

Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth

1.50 Metre for 150mm diameter sewer.

(B) Providing sock pit of 5.00 Cu.M. Volume including

excavating and filling brickbats with dry masonry work at top

for 45cm. height including covering the top with stone 1.00 Each 3372.19

including providing vatas in C.M. 1:3 with finishing curing etc.

complete as directed.

Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and connection 5000.00 Litre 3.95

etc.complete on terrace

BAREJA NAGARPALIKA, BAREJA

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type

of pipe to be erected concealed in/ on surface on wall/ ceiling

complete with 6A Modular type switch / bell push & accessories

and earth continuity of following type, erected on PVC /

Metallic box, single mounting base frame covered with

textured/ metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ ceiling

rose / H.D. Connector as directed. (a) with medium class

Rigid PVC pipe and accessories Cat. III

Pointwiring for on board Looped Plug with 6A Modular type

switch & 5 pin socketerectedon PVC /Metallic /Woodenbox,

single mounting base frame covered with textured/ metallic/ 5.00 Pt. 257.55

white front plate module serected on / in wall / ceiling with

following type accessories Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel

conforming to IS:513 / CRCA / aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with

company mark / name 160V to 270V, Power Factor more than

0.95, THD <15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 25.00 Each 295.93

lumens/watt, LED LED driver efficiency > 85% (fitting required

LM-79 & LM-80 Certificates) (NOTE : Below description have

shown ranges of Wattage capacity of LED fittings. The Engineer

incharge may select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver (iii) 18-20 Watts,

Surge-2KV, IP-20, conventional 4 feet Cat-lll

Add 5% Additional Accessories

BAREJA NAGARPALIKA, BAREJA