Additional Civil, electrical and sanitation works to be carried out at JKPDC, Corporate Office, Sgr.

Amount

Engagement of carpenters to dismantle partition wall comprising of cladding, plywood, wooden frame work, etc.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position including deduction on account of salvage of wood.

Providing and fixing plywood (4mm thick) complete in every respect including carriage from source to site of work including deduction on account of salvage of wood.

Providing and fixing decorative 1mm thick high pressure laminated sheet of plain/wood grain in gloss/matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality

Providing and fixing Float glass panes 5.5 mm thick glass panes

Repairs to flooring by way of fixing new pieces of flooring in cut out partition of wall complete job

Fixing old glass panes with wooden fillets (excluding cost of fillets)

Providing & Fixing of eager on Glass with etching material

Supplying and fixing new wooden fillets2nd class teak wood fillets

Providing and fixing plywood (10mm thick) complete in every respect including carriage from source to site of work.

Making the opening in brick masonry including dismantling, fixing chowkhats in floor or walls cutting masonry and fixing holdfasts in cement concrete 1:3:6 (1 cement:3coarse sand : 6 stone aggregate 20 mm nominal size) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors complete to match the existing surface : For door

Making the opening in brick masonry including dismantling, fixing chowkhats in floor or walls cutting masonry and fixing holdfasts in cement concrete 1:3:6 (1 cement:3coarse sand : 6 stone aggregate 20 mm nominal size) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors complete to match the existing surface : For clerestory window

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead .

Brick work with common burnt clay F.P.S.(non-modular) bricks of class designation 75 in foundation and plinth in

12mm Cement plaster:1 : 4 ( 1 cement : 4 fine sand)

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Reinforced cement concrete work in beams, suspended floors, upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levelsGranite of any colour and shape

Centering and shuttering including strutting, propping etc. and removal of form for·Shelves (Cast in situ)

Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510 x1040mm bowl depth 225mm

Fixing of existing white vitreous china wash basin in RCC counter including making all connections, cost of fittings and mixers complete .

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Flexible pipe, 40 mm dia.

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than1.970 kg.a) 15 mm nominal bore of standard back type.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5mm nominal size stoneaggregate.

Providing and fixing 2nd class teak wood lipping/moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the pre laminated particle board as per directions of the engineer-in-charge

Providing and fixing Opaque Float glass panes5.5 mm thick glass panes

Fixing of existing wooden door in sliding arrangement including cost of fittings, channels, etc complete

Providing and fixing of heavy duty exhaust fan in the pantry including electrical wiring etc complete

Demolishing R.C.C. counter with granite by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead .

Engagement of labour for dismantling tiles, urinal etc

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA,or equivalent make in all colour, shades of size as approved by Engineering- incharge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3 kg persqm including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing Powder coated aluminum (minimum thickness of powder coated 50 microns) 100 x 45 mm aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e., attop, bottom and sides with required EPDM rubber Ineoprene .. gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminum snap beading for glazing I paneling, C.P.brassI stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, paneling and dash fasteners to be paidfor separately.)

Making changes to available aluminum door and fixing same in the aluminum frame

Providing and fixing of ACP as paneling in aluminum works including fitting , wastage, leads , etc complete as per the instructions of Engineer incharge

Providing and fixing PTMT grating of approved quality and colour Circular type100 mm nominal dia.

Providing and fixing grade'A' trap complete with C. I. grating brick masonry chamber withbricks of class designation 75 and water tight C. I. cover300x300 mm size (inside) the weight of cover to be less than 4.50 kg and frame to be not less than 2. 70 kg as per standard design 100 x 100 mm size P typeWith F.P.S. brick

Providing and fixing PVC pipes of Prince make(B-type) 75mm diameter for flushing of wastes from bathrooms up to the septic tank with all fittings including collars, bends, door Tee, etc

Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls, etc.Internal work15mm dia nominal bore (medium)

Providing and fixing C.P. wall mixer a) 15 mm nominal bore of standard back type.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points _of approved make conforming to IS : 8931 for a) 15 mm nominal bore

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, height of 75mm with concealed fitting arrangements, weighing not less than 1 06gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than170 gms.

Providing and fixing of overhead shower

Providing and fixing of exhaust vent ( 3m length) of appropriate size for the exhaust fan

Providing of nails

Providing and fixing plywood (18mm thick) complete in every respect including carriage from source to site of work.

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Dismantling of existing light/fan/bell/ socket out let point on separate board/ wiring and circuit with insulated wire in casing/ conduit/ batten fitting and accessories complete job.

Point Wiring for light 6 Amp with 3 x 1.5 sq mm FR PVC insulated multistrand copper conductor single core 1100/660 volts voltage grade ISI marked in surface rigid 25 mm2 PVC conduit 2 mm thick with 10/6 amp. single pole modular switch with plate / boxes of suitable size and earthing with 1.5 Sq mm FR insulated multistrand copper conductor of green colour inside same conduit etc as required including all connected charges for the complete job.

Point wiring for 230 V AC, 3 x 1 No. 5 pin 16 Amp socket outlets (2 outlet wired on one circuit) with 3 x 4 sq mm (P+N+E) FR PVC insulated 660/110 voltage grade flexible stranded (56 strands of 0.3 mm dia) copper conductor wires in ISI embossed 25 mm dia PVC recessed and or surface conducting system including cost of providing saddles/ hangs etc for surface conducting and or cost of cutting and filling chassis for recessed conducting and including the cost of supplying and fixing Modular type with box grid plate mounted 240 volts 16 Amp 6 pin combined shuttered socket outlets along with 240 volts 16 Amp control switch of approved quality and inter connections complete as per specifications and as required complete upto nearest SDB including all connected charges for the complete job.

Supply and fixing of 25 mm, 2 mm thick PVC ISI certified conduits in following sizes including cost of junction boxes, bends, elbows, sockets, tees etc laying in slab/ floor cutting chassis and making good or surface mounted including all fixing hardware 25 mm dia ( for light circuit) including all connected charges for the complete job.

Supply and fixing of 20-32 A, 10 KA rating double pole C class 240 volts in the existing MCB DB box complete with connections, testing and commissioning as required including all connected charges for the complete job.

Supply & fixing of 40 ampere, 10 ka rating double pole C class 240 volts in the existing MCB DB box complete testing and commissioning as required including all connected charges for the complete job.

M/S IMTIYAZ AHMAD BHAT

MANZOOR AHMAD BHAT