Development of ABC Center at sector 30,Gandhinagar For Gandhinagar Municipal Corporation

Name of Work : -DEVELOPMENT OF ABC CENTER AT Sector-30, GANDHINAGAR FOR GANDHINAGAR MUNICIPAL CORPORATION

Sr No. ITEM OF WORK Unit Total Qty Figure Rate in words Amount

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

Rupees One Thousand Five

getting out the soil and disposal of the surplus excavated soil as

1 Each 108.00 1561.19 Hundred Sixty One and

directed within a lead of 50 Meter for following diameter of

Eighteen Paise Only

pipes.(iii) 300 mm

Add to or deduct from the rate for Bore Holes of 3.5 m Depth, if Rupees Five Hundred Fifty

2 bore holes are made deeper or shallower than 3.5M. for Piles of Each 108.00 557.99 Seven and Ninety Nine Paise

following diameter.(iii) 300 mm Only

Filling in foundation and plinth with murrum or selected soil in layer Rupees Two Hundred

3 of 20 cm thickness including watering ramming and consolidating Cum 5253.00 277.14 Seventy Seven and Fourteen

etc. complete. Paise Only

Rupees Four Hundred Eighty

Filling in plinth with sand under floors including watering ,ramming

4 Cum 39.00 481.70 One and Sixty Nine Paise

consolidating and dressing etc. complete.

Providing and laying cement concrete 1:3:6 (1-Cement : 3-coarse

Rupees Three Thousand

sand : 6- hand broken stone aggregates 40 mmnominal size) and

5 Cum 23.00 3084.89 Eighty Four and Eighty Nine

curing complete excluding cost of formwork in (A) Foundation and

Providing and laying controlled cement concrete work M250 and

Rupees Four Thousand Six

curing complete including the cost of form work but excluding the

6 Cum 80.00 4638.18 Hundred Thirty Eight and

cost of reinforcement of reinforced concrete work in foundation,

Eighteen Paise Only

footings base of column and mass concrete. (A) Footing

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding the

cost of reinforcement of reinforced concrete work in Column ( B)

Rupees Seven Thousand

7.1 1) Column Ground Floor Cum 10.00 7892.72 Eight Hundred Ninety Two

and Seventy One Paise Only

Rupees Seven Thousand

7.2 2) Column TERRACE Floor Cum 4.00 7892.72 Eight Hundred Ninety Two

and Seventy One Paise Only

Providing and laying controlled cement concrete work M250 and

Rupees Six Thousand Four

curing complete including the cost of form work but excluding the

8 Cum 54.00 6498.42 Hundred Ninety Eight and

cost of reinforcement of reinforced concrete work in Beams. (C )

Forty Two Paise Only

Ground Beams and plinth beams.

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding the

cost of reinforcement of reinforced concrete work in Floor Beams.

(D) Floor Beams.

Rupees Six Thousand Four

9.1 1) Floor Beam Ground Floor Cum 17.00 6498.42 Hundred Ninety Eight and

Forty Two Paise Only

Rupees Six Thousand Four

9.2 2) Floor Beam Terrace Floor Cum 5.00 6498.42 Hundred Ninety Eight and

Forty Two Paise Only

Providing and laying controlled cement concrete work M250 and

10 curing complete including the cost of form work but excluding the

cost of reinforcement of reinforced concrete work in Slabs. (E ) Slab

Rupees Six Thousand Seven

10.1 1) Slab Ground Floor Cum 70.00 6768.42 Hundred Sixty Eight and Forty

Rupees Six Thousand Seven

10.2 2) Slab Terrace Floor Cum 4.00 6768.42 Hundred Sixty Eight and Forty

Providing and laying controlled cement concrete work M250 and

curing complete including the cost of form work but excluding the

cost of reinforcement of reinforced concrete work in Staircase. (F )

Rupees Eight Thousand Fifty

11.1 1) Staircase Ground Floor Cumt 5.00 8052.00

Providing and laying controlled cement concrete work M200 and

curing complete including the cost of form work but excluding the

cost of reinforcement of reinforced concrete work in Lintel or

Copping. (G) Lintels

Rupees Six Thousand Seven

12.1 1) Lintel/ Copping Ground Floor Cumt 9.00 6768.42 Hundred Sixty Eight and Forty

Rupees Six Thousand Seven

12.2 2) Lintel/ Copping Terrace Floor Cumt 3.00 6768.42 Hundred Sixty Eight and Forty

Providing and laying controlled cement concrete work M200 and

curing complete including the cost of form work but excluding the

cost of reinforcement of reinforced concrete work in Chajja. ( H)

Rupees Six Thousand Seven

13.1 1) Chhajja Ground Floor Cumt 3.00 6768.42 Hundred Sixty Eight and Forty

Rupees Six Thousand Seven

13.2 2) Chhajja Terrace Floor Cumt 1.00 6768.42 Hundred Sixty Eight and Forty

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

Rupees Seventy Seven and

14 bending, binding and placing in position complete upto floor two KG 26600.00 77.29

Twenty Eight Paise Only

Anti-Termite System:Providing and laying of permanent piping

technology anti-termite treatment before flooring work by installing

LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip every 30 cm interval in

the tube, having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at

the entire periphery of the building and at internal network of

building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr.

c/c distance (adjusted as per building layout ) & Ends of loop pass

Rupees One Hundred Thirty

through a PVC elbow of minimum 32 mm ID at junction box of wall

15 Sqmt 254.00 134.33 Four and Thirty Three Paise

and floor level, entering into a steel reinforced grooved flexible

pipe of minimum 22 mm ID leading into junction box and the loops

shall terminate in junction boxes & test every junction during

injecting chemicals for termite control treatment. The anti termite

chemical Imidacloprid 30.5% SC mix as per IS-6313

(part III) shall be injected by the pressure pump diluted with water @

10.5 ml/5 ltr of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The

contractor shall submit approved line plan for piping system and

junction boxes dully approved by Engineer-in-Charge with bond of

5 year warranty.(i)Anti Termite chemical injected area (Chemical

injecting incl. labour cost)

Providing and laying Laminated HDPE Woven Geomembrane (Type

2) for waterproof lining, including transportation, overlap jointing, Rupees One Hundred Eleven

heat sealing, anchoring, testing and all incidental works complete and Ten Paise Only

as per specifications and direction of Engineer-in-Charge.

Providing and constructing brick work using common burnt clay

Rupees Four Thousand Two

building bricks having crushing strength not less than 35 kg/sqcm. in

17 Cumt 21.00 4244.85 Hundred Forty Four and

foundation and plinth in cement mortar 1:5 (1 cement :5 fine sand)

Eighty Four Paise Only

etc. comp.(B) Conventional

Rupees Four Thousand Two

17.1 Ground Floor Cumt 95.00 4244.85 Hundred Forty Four and

Eighty Four Paise Only

Rupees Four Thousand Two

17.2 Terrace Floor Cumt 37.00 4244.85 Hundred Forty Four and

Eighty Four Paise Only

Half brick masonary in common burnt clay building brick having

18 crushing strength not less than 35 kg/sq.cm. In cement mortar 1:4 (

cement : 4 coarse sand ) in foundation and plinth (B) Conventional

Rupees Six Hundred Twenty

18.1 Ground Floor Sqmt 33.00 629.80 Nine and Seventy Nine Paise

Providing 15mm. thick cement plaster in single coat on rough

(similar) side of single or half brick walls for interior plastering up to

floor two level finished even and smooth in cement mortar 1:4 [1

cement: 4 sand) etc. complete

Rupees One Hundred Sixty

19.1 Ground Floor Sqmt 701.00 165.02

Five and Two Paise Only

Rupees One Hundred Sixty

19.2 Terrace Floor Sqmt 115.00 165.02

Five and Two Paise Only

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two level and

finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-

Rupees One Hundred Thirty

20.1 Ground Floor Sqmt 332.00 135.30 Five and Twenty Nine Paise

Rupees One Hundred Thirty

20.2 Terrace Floor Sqmt 19.00 135.30 Five and Twenty Nine Paise

20mm. thick sand faced cement plaster on walls upto 10 meters

Rupees Three Hundred

above ground level consisting of 12mm thick backing coat of c.m.

21 Sqmt 846.00 315.69 Fifteen and Sixty Eight Paise

1:3 (1 cement :3 sand ) and 8mm thick finishing coat of c.m. 1:1(1

cement :1sand)etc. complete.

Applying two coats of Birla or Asian acrylic lappy (putty) and two

coats of primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and Rupees One Hundred Twenty

22 sand prepared smooth. and Wall painting (two coats) with plastic Sqmt 1167.00 123.78 Three and Seventy Seven

emulsion paint of approved brand and manufacture on Paise Only

undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

Rupees Eighty Three and

23 even shade including throughly brushing the surface free from Sqmt 1167.00 83.18

Eighteen Paise Only

mortar droppings and other foreign matter and sand papered

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after Rupees One Hundred Twenty

thoroughly brushing the surface to remove all dirt, and remains of and Twenty Six Paise Only

loose powdered materials.etc complete

Providing and laying Granite Slab 18mm thick thick in flooring

Rupees Two Thousand One

treads of steps and landing laid on a bed of 12mm thick cement

25 Sqmt 58.00 2199.78 Hundred Ninety Nine and

mortar 1:6 (1-Cement : 6-Coarse Sand) finishing with full molded

Seventy Eight Paise Only

round edges, flush pointing in white or colour cement.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

Rupees One Thousand Four

surface or fixing on existing flooring by adhesive material including

26 Sqmt 270.00 1467.72 Hundred Sixty Seven and

dismentaling of existing flooring and jointed with color cement slurry

Seventy Two Paise Only

including finised with flush pointing & cleaning the surface etc.

complete for DARK shade

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of Rupees One Thousand One

27 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- Sqmt 21.00 1114.09 Hundred Fourteen and Nine

coarse sand) and jointed with white cement slurry Paise Only

Providing and laying coloured glazed tiles of the size 300 mm x

Rupees One Thousand Five

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and

28 Sqmt 36.00 1513.28 Hundred Thirteen and Twenty

dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

Eight Paise Only

sand) & jointed with white cement slurry.

Providing and fixing 35mm thick factory made moulded door shuter

consisting of solid core single leaf flush door of 30mm thickness,

lipped with 15mm (5mm x 3) thick x 30mm width on one stiles and

top rail and 10mm (5mm x 2) thick x 30mm width on the other stiles

and bottom rails. The inner panel laminated with 2mm thick termite

Rupees Two Thousand One

proof, water proof and fire resistant moulded PVC sheet with

29 Sqmt 34.00 2152.31 Hundred Fifty Two and Thirty

raised panel design in different plain and /or prelim colours on one

side after routing the moulded design on flush door and 2mm plain

and/or prelim PVC sheet on other side using rubber adhesive on

flush door and solvent cement adhesive on the PVC liping etc.

complete as per direction of Engineer in charge, manufacture’s

specification and drawing.

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm,@

Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size

61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding Rupees One Thousand Seven

30 shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of Sqmt 29.00 1713.70 Hundred Thirteen and Sixty

0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ Nine Paise Only

wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

Providing and fixing standared extruded of alluminium section of

Rupees One Thousand One

size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour

31 Sqmt 3.00 1175.56 Hundred Seventy Five and

anodized alluminium frame for ventilation with 5 mm thick frosted

Fifty Five Paise Only

glass as details etc complete for Ventilation

Providing and fixing M.S. grills of required pattern to wooden frames

Rupees One Hundred Fifty

of windows etc. with M.S. flats at required spacings and frame

32 Kg 1020.00 152.33 Two and Thirty Two Paise

alround, square or round bars with round headed bolts and nuts or

by screws. (B) ORNAMENTAL GRILL

Providing and fixing in position S.S. daso by providing top 50 mm

dia stain less steel pipe rail with starting and end point vertical post Rupees One Thousand Six

33 of 50 mm dia with wall/column including bending welding and Rmt 35.00 1689.73 Hundred Eighty Nine and

fixing for staircase and balcony as directed.(testing is required of s.s Seventy Three Paise Only

304) for all floor

Fabricating, supplying and fixing in position SS railing for staircase

and balcony with 50mm dia.(16 gauge) TOP RAIL, 32X32mm

Square pipe(16 gauge) VERTICAL SUPPORT & 16mm Dia. (16 gauge)

Rupees Three Thousand Two

HORI. MEMBER brush finish and 304 grade as per Indian Standrd

34 Rmt 25.00 3285.53 Hundred Eighty Five and Fifty

and detailed drawing including grinding, cleaning and filling the

Three Paise Only

welded spots with SS finish (Only Length will be paid for payment

heigth max.1.0 mt.). The Work to be executed as per consultant

Toilet sunk water proofing

Providing and carry out waterproofing treatment to sound concrete

surface of toilets, sunken slabs, corridors, wet areas etc. after proper

surface preparation to remove loose dust, dirt etc., repairing of

cracks (if any) using polymer modified mortar, carry out

cementitous injection grouting at leakage points modified with

Plasticised Expandive Grout Admixture @ 225 gms per bag of

cement, carry out 50 mm thick cement mortar (1:3) vatta/ corner

modified with Styrene Butadine Polymer bonding agentat dosage

of 2.5 Ltr per 50kg cement, Pre-dampening concrete surface,

mixing and application of two coats of Elastomeric Polymer

modified cementitious waterproofing coating by incorporating

Rupees Four Hundred Fifty

36 gsm glass fibremesh between 1st and 2nd coat using suitable brush Sqmt 11.00 454.50

Four and Fifty Paise Only

or roller as per coverage etc. complete including all tools and

tackles as per manufacturer’s specification.

Cured Polymer modified cementitious waterproofing coating shall

comply with ASTM D4060, ASTM D4541, ASTM D638,ASTM C836 and

possess below properties: Mixed density: 1.68 g/cc, Adhesion to

concrete-> 1 N/mm2, Non-toxic, Static crack accommodation-1

Water proofing system shall be executed by only approved

applicator of approvd brand and under strictly supervision of

techanical fellow of manufacturer. The rate includes giving 10 year

guarantee for waterproofing on a Rs.100/- stamp paper in

approved proforma.

Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over

Rupees Seven Hundred

cement mortar 1:3 to plain or slope and to be tempered to bring

37 Sqmt 270.00 779.70 Seventy Nine and Sixty Nine

mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

Signages : Providing and fixing signages comprising form ss plate

Rupees Five Hundred Forty

37 with Vinyl film letter as per instruction of Archiect/EIC. Contractor Sqft 8.00 545.40

Five and Forty Paise Only

shall submit mock up sample.

Informatory Signs :-Providing and fixing sing boards made out of

2mm aluminium sheet; size 80 x 60cms. rectangle as per the design

of IRC-67-1977 pre treated with phospheting process & acid

teching; coated with one coat of epoxyprimer and two coats of

best qualityepoxy paint; reflectorised with retro refiective sheeting

as per latest M.O.S.T. Specifications; 3.1m long stand postand frame

Rupees Three Thousand Eight

fabricated from suitable sizeiron angle of 35 x 35 x 3mm75x75x6mm

38 Sqft 2.00 3856.90 Hundred Fifty Six and Eighty

as required; painted with best qualityepoxy coatings in black and

Nine Paise Only

whitebends. the details of symbol for eachboard shall details of

symbol for eachboard shall be as per the instruction ofengineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x45 x

60cms. for each leg. including excavation curing tec. complete

under the supervision of engineer in charge.(A) Engineer

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of Rupees Three Hundred

39 M200 grade concret as per approved design and including Sqmt 225.00 397.53 Ninety Seven and Fifty Two

excavation for fixing in proper line and level,filling the joint with C:M Paise Only

1:3 (1cement:3fine sand) etc complete.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design Rupees Seven Hundred Six

Confirming to IS 15658 : 2006 including 35 mm Sand layer for and Eighty Nine Paise Only

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing (chainlink fencing) with fabrication of M.S.

Hollow section vertical support of size 50 x 50 x 2.9 mm fixed at

mm c/c and horizontal support of 50 x 50 x 5 angle on top , center

and bottom with galvanize chain link 50 x 50 x 10 guage

Rupees One Thousand Six

jali(300gsm) fitted with 32 x 5 mm M.S. flat including welding and

41 Sqmt 520.00 1699.83 Hundred Ninety Nine and

erecting the same in position at required spacing including fixing

Eighty Three Paise Only

the posts in ground with 0.23 mt x 0.45mt x 0.45mt rcc block in 1: 2:

grade with hold fast of 50 x 50 x 5mm angle including two coats of

oil painting and single coat primer on MS section etc. complete as

Providing & laying sandwich platform comprising of a) Sandwich of

18 mm thick single side polish Telephone Black Granite of approved

size, shade and sample on top and 30 mm thick polished kotah in

bottom with 25mm thick cement mortar (1:4) in between with facia

b) At centre vertical sandwich supports of 30 mm thick two kotah

stone on sides and 20mm CM (1:4) in between and at both end

walls vertical supports of 18 mm thick double side Telephone Black

Rupees Five Thousand Two

Granite, c) 75 mm raised platform at bottom with kotah on top and

42 Sqmt 3.00 5283.31 Hundred Eighty Three and

50mm CM (1:4) at bottom, kotah stone skirting as per design and

Thirty One Paise Only

approved sample. The rate Includes rounding, champering and

mirror polishing of edges, facias of Telephone Black Granite, MS

support including necessary bonding adhesive (if required). Rate

shall be also inclusive of making holes & cut-outs for S.S. sink/wash

basin/Pillar tap / Bib tap etc. as directed by engineer İn charge.

(Only plan area shall be measured & paid for). Rate shall be

included all kotah & Telephone Black Granite mentioned in above.

Providing and fixing wash down water closet (European type, W.C.

Pan) with integral P or S trap including jointing the trap with soil pipe Rupees Two Thousand Five

43 in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to Each 7.00 2503.79 Hundred Three and Seventy

be measured and paid )(A) vitreous China Pattern :(i) in white Nine Paise Only

Providing and fixing washbasin with single hole for pillar tap with C.I.

Rupees One Thousand Four

or M.S. brackets painted white including sutting holes and making

44 Each 9.00 1484.89 Hundred Eighty Four and

good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back

Eighty Nine Paise Only

washbasin 550 mm x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass towel rail comlete with C.P. brass

Rupees Six Hundred Sixteen

45 brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x Each 7.00 616.42

and Forty Two Paise Only

Providing, and fixing Angular Stop Cock with Wall Flange of

Rupees Four Hundred Seven

46 approved ISI brand quality, including fixing in Pipeline and testing Each 9.00 407.42

and Forty Two Paise Only

the same… etc., completed as per directed by E.I.C..

Providing and Fixing Long Body Bib Cock with wall flange or Rupees Four Hundred and

equivalent) etc., completed as per directed by E.I.C Fifty Seven Paise Only

Providing & fixing 600 mm. x 450 mm. bevelled edge mirror of

superior glass at all floor levels, mounted on 6 mm. th. A.C. sheet or Rupees Eight Hundred Fifty

plywood sheet & fixed to wooden plugs with C.P. brass screws and Nine and Forty Paise Only

washers etc. for all floor

Providing and fixing PVC SWR Nanhi trap IS 14735 for drain -100 mm

Rupees Five Hundred Ninety

diameter with jali of the following nominal diameter of self cleaning

49 Each 9.00 599.64 Nine and Sixty Three Paise

design with C.I scead down or hinged grating including the cost of

cutting and making good the wall.

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

Rupees Eight Hundred

shall be jointed with each other with rubber lubricant, pipe shall be

50 Rmt 60.00 876.90 Seventy Six and Ninety Paise

fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

Rupees Eight Hundred Thirty

50 B) 160mm Dia Rmt 100.00 834.38 Four and Thirty Eight Paise

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure poluthene pipes of the following outside Dia. Low densidy,

Rupees Three Hundred Thirty

51 complete with special falnge compression type fittings, wall Rmt 53.00 339.05

Nine and Four Paise Only

clipsetc. including making good the wall ceiling and floor.(G)110

Providing laying and jointing in true line and level following dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

Rupees Seventy Two and

52 with the help of clamp at every two metre C/C or shall be Rmt 10.00 72.65

Sixty Four Paise Only

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials. (i) 15mm Dia.

Rupees Ninety One and

52.1 (ii)25mm Dia Rmt 16.00 91.84

Eighty Three Paise Only

Rupees One Hundred Forty

Eight and Eleven Paise Only

Rupees One Hundred Ninety

Five and Sixty Six Paise Only

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) Rupees One Hundred

53 seal for potable water of following dia. nominal bore tube fittings Rmt 60.00 170.36 Seventy and Thirty Five Paise

and clamps including making good the wall, ceiling and floor etc. Only

complete.[A] 15 mm.

Supplying & installing Brass Handle Ball Valve conforming to IS

of RB, Italy or equivalent. Ball valve must be having screwed ends. Rupees Two Hundred Seven

The ball valve should be with stand with maximum pressure up to 16 and Fifty Nine Paise Only

Kg/cm2. Complete job as specified & directed. A) 15 mm

Rupees Three Hundred Sixty

54.1 B) 25 mm Each 4.00 362.44 Two and Forty Three Paise

Rupees Nine Hundred Two

and Seventeen Paise Only

Rupees One Thousand Three

54.3 D) 50mm Each 4.00 1370.10 Hundred Seventy and Nine

Providing and Fixing S.W. Gully trap with C.I. grating brick masonry

Rupees One Thousand Two

chamber & water tight C.I Cover with frame of 300 mm x

55 Each 9.00 1246.92 Hundred Forty Six and Ninety

mm size (inside) with standard weight. [1] square mouth trap (B)

150 mm x 100 mm. size P or R -type

Constructing Brick Masonry Chamber for underground C.I

inspection chamber and bends with bricks having crushing strength

not less than 35 kg/sqm in CM 1:5 C.I cover with frame (Light Duty)

455mm x 610mm internal dimension total weight of cover with

frame to be not less than 38 kg (Weight of cover 23 kg and weight

Rupees Two Thousand Nine

of frame 15 kg) R.C.C top slab with 1:2:4 mix ( 1 cement : 2 coarse

56 Each 9.00 2932.93 Hundred Thirty Two and

sand : 4 graded stone aggregate 20mm nominal size ) foundation

Ninety Two Paise Only

concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete on walls and bed concrete, excavation

etc. complete. (I) Inside dimension 455mm x 610mm x 450mm deep

for single pipe

Rupees Three Thousand Six

(II) Inside dimension 500mm x 700mm x 450mm deep for pipeline

56 Each 9.00 3660.76 Hundred Sixty and Seventy

Five Paise Only

supplying and fixing double coated PVC waer tank of syntex or ISI

equivalant make including delivery at site, supply and fixing of

inlet,outlet,air vent overflow,ball cock,drainage sleeves of the

Rupees Three and Twenty

57 specified size, with necessary neo-prene gasket/ packing/ washer, lit. 2000.00 3.21

GI washer & check nuts etc. complete as directed on terrsce, loft in

bathrooms etc in any height. the rate shall include for fixing

additional accesories supplied by the accessories.

Supplying and fixing reinforced concrete heavy duty nonpressure

Rupees Six Hundred Seventy

pipes with collars for culverts including setting and joining the pipes

58 Rmt 50.00 675.36 Five and Thirty Five Paise

in C.M. 1:2 watering and laying (to level or slope) of I.S. class NP2 of

following internal diameters.(i) 300mm dia.

Electrification Work

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC Rupees Four Hundred Sixty

59 / Metallic/Wooden box, single mounting base frame covered with Pt. 20.00 468.64 Eight and Sixty Four Paise

textured/metallic/white front plate modules erected on / in wall / Only

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Tissino / Modular secondary light point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth continuity and

necessary connection with primary light with accessories erected

on Metal / PVC / wooden box covered with 3 mm thick Rupees Two Hundred and

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. Ninety Nine Paise Only

with necessary Lamp holder / ceiling rose / H.D.Connector as

directed. Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point. (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

Rupees Eight Hundred Nine

61 continuity of following type erected on PVC / Metallic/Wooden Pt. 4.00 809.01

and One Paise Only

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

62 erected complete with Modular type switch & 5 pin Plug erected 0.00 Rupees Only

on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

Rupees Six Hundred Twelve

62.1 nearby switchboard/mcb db board (f) with medium class Rigid PVC Pt. 10.00 612.06

and Six Paise Only

pipe and accessories erected concealed in wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from

Rupees Eight Hundred Ninety

62.2 mcb db board. (f) with medium class Rigid PVC pipe and Pt. 3.00 894.86

Four and Eighty Six Paise Only

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic/Wooden box, single

Rupees Three Hundred Nine

63 mounting base frame covered with textured / metallic/white front Pt. 1.00 309.06

and Six Paise Only

plate modules erected on / in wall / ceiling with following type

accessories Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires erected in below type

of pipe with 6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box, single Rupees Four Hundred Ninety

64 mounting base frame covered with textured / metallic/white front Pt. 2.00 493.89 Three and Eighty Nine Paise

plate modules erected on / in wall / ceiling as per pipe erected. Only

with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete CAT.

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

65 with textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In

Rupees One Hundred Fifty

65.1 (1)One No. SP 6 Amp. Cat.III Ea. 1.00 151.50

One and Fifty Paise Only

Rupees One Hundred Fifty

65.2 (2) One No 5 pin plug Cat.III Ea. 2.00 151.50

One and Fifty Paise Only

Rupees One Hundred Sixty

65.3 (3) Two Pin/RJ-11 [A] For One Gang Telephone Socket Cat.III Ea. 1.00 160.59

and Fifty Nine Paise Only

Rupees One Hundred Sixty

65.4 (4) TV Co-axial Socket outlet Cat.III Ea. 1.00 160.59

and Fifty Nine Paise Only

Rupees One Hundred Sixty

65.5 (8) Computer RJ-45 socket Cat.III Ea. 1.00 160.59

and Fifty Nine Paise Only

Rupees Twenty Five and

65.6 (7) Blank Plate Single Cat.III Ea. 1.00 25.25

Twenty Five Paise Only

Rupees One Hundred Eighty

65.7 (9) 16 Amp. SP one way switch Cat.III Ea. 1.00 180.79

and Seventy Nine Paise Only

Rupees One Hundred Ninety

65.8 (10) 6/16Amp. Universal socket Cat.III Ea. 1.00 199.98 Nine and Ninety Eight Paise

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

Rupees Thirty Three and Thirty

66 with necessary PVC fittings & Junction boxes fixed with adhesive Mtr. 560.00 33.33

Three Paise Only

solution & Clamps with following dia of pipes, in approved manner

as directed (b) 25 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) With medium

class Rigid PVC pipe and accessories

Rupees Seventy Eight and

Seventy Eight Paise Only

Rupees One Hundred Four

and Three Paise Only

Supplying & erecting M.S. Box having 16 Gauge painted with red

oxide or Heavy duty PVC box erected flushed on wall or Rupees Seventy Six and

concealed in wall with necessary plastering & finishing as directed Seventy Six Paise Only

of following size. (b) 175 mm x 100 mm x 75 mm(d)

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

69 MCB to house appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door

Rupees Three Thousand Eight

69.1 (iv)12 way Ea 1.00 3874.36 Hundred Seventy Four and

Thirty Six Paise Only

Rupees Three Thousand Four

69.2 (iii)8 way Ea 2.00 3412.79 Hundred Twelve and Seventy

Nine Paise Only

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single Rupees One Thousand One

70 mounting base frame covered with textured/metallic /white front Ea 1.00 1133.22 Hundred Thirty Three and

plate,modules erected with necessary connections as directed 1 Twenty Two Paise Only

no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch 3 nos.

6A 5 pin Plug For Modular Type Accessories

Supplying & erecting Electronic Type Cordless Call Bell erected on

Rupees Two Hundred Fifty

71 PVC/Metal board having portable bell push working on D.C. & bell Ea 1.00 250.48

and Forty Eight Paise Only

on 230V A.C. supply with cells / battery

Rupees Seventy One and

72 Decorative call bell Ting-tong box type 250 volts complete erected Ea 1.00 71.71

Seventy One Paise Only

providing and erecting Miniature circuit breaker single pole 6A to

Rupees One Hundred Twenty

25A suitable to operate on 240 V A.C. system and having breaking

73 Ea 37.00 123.22 Three and Twenty Two Paise

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B

74 curve) having 10KA breaking capacity & confirms to IS :8828 in Rupees Only

existing box having following capacity

Rupees Six Hundred Thirty

74 (a) 6 to 32 Amp. Cat.III Ea 4.00 637.31 Seven and Thirty One Paise

Rupees Seven Hundred Two

74.2 (b)40 Amp. Cat.III Ea 2.00 702.96

and Ninety Six Paise Only

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component.

for following Max. rating erected as directed

Rupees Two Thousand One

75 (i) 25 Amps.DP Cat. III Ea 5.00 2166.45 Hundred Sixty Six and Forty

Five Paise Only

Rupees Two Thousand Four

75.2 (ii) 40Amps. DP Cat. III Ea 2.00 2458.34 Hundred Fifty Eight and Thirty

Four Paise Only

Supplying & fixing box for housing RCCB + MCB combination made

of 18 SWG sheet steel duly powder coated with gasket, dust & Rupees Four Hundred Ninety

vermin proof bakelite shield two earthing terminals for following and Eighty Six Paise Only

type of RCCB, RCCB + MCB [b] For 4 Pole

Providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on 3 phase and Rupees Two Thousand Six

77 neutral 415V,50Hz. having characteristic of quick action & tripping Ea 2.00 2694.68 Hundred Ninety Four and

with all advance feature & do not incorporate any electronic Sixty Eight Paise Only

component for following Max. rating erected as directed. [f] 63A,

pole Three Phase Cat. II

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current /

Rupees Two Thousand Two

cross section area) duly wrapped with colour insulating tape for

78 Rn.Mtr 1.00 2204.83 Hundred Four and Eighty

phase sequence of following current carrying capacity, erected

Three Paise Only

with necessary bus bar supports /insulators, main cable socket to

each busbar,erected in existing cubical panel with necessary

connections. (D) Suitable for 400 Amp. Capacity

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB Rupees Seventeen Thousand

79 for measuring instruments, earth bus & earth bolts, foundation Sq.Mtr 1.00 17954.77 Nine Hundred Fifty Four and

flange - bolts-base Plates, sufficient nos. of hinged doors, handles Seventy Seven Paise Only

with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with

epoxy powder coating. (The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper Aluminium strips, meters,

Fuses etc. The dimension shall be measured excluding base beams)

The panel shall be supplied with following approved manufacturers

with following size. (C) The standard companies switch gear shall

be used and only manufacturers as per IEC 61439 for beneficial use.

(i) with 350mm depth

Supplying & erecting approved make Four Pole 415V change over Rupees Twenty Six Thousand

80 switch interior for panel mounting with operating mechanism A.C.23 Ea 1.00 26106.48 One Hundred Six and Forty

duty confirming to IS for (F)400A Cat-lll Eight Paise Only

Providing and erecting required size Aluminium strip for earthing of Rupees Two Hundred Twenty

81 H.T. , OCB / ACB / Transformer, LT panel board, Motors etc. using Kg. 2.00 225.23 Five and Twenty Three Paise

copper clamp. Only

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make OEM has to

Rupees Five Thousand Seven

submit test certificate including value of earth resistance of

82 Ea. 1.00 5760.03 Hundred Sixty and Three

installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (b)For

Electrical installation up to 11 KV in normal soil. Length of Pipe :

mtrs Back filling Compound :1 no. Bag of 25 Kg.

Providing & erecting 415 V MCB three Pole for Motor & Inductive

Rupees Three Hundred Sixty

83 Load (C Curve) having 10KA breaking capacity & confirms to IS Ea. 1.00 362.59

Two and Fifty Nine Paise Only

:8828 in existing box having following capacity (b)40 Amp. Cat.III

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of

Rupees Three Hundred Forty

84 (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Mtr. 35.00 341.38 One and Thirty Eight Paise

Rupees Four Hundred Fifty

Four and Fifty Paise Only

Rupees Six Hundred Forty

84 (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) Mtr. 6.00 648.42 Eight and Forty Two Paise

Rupees One Thousand Eighty

84 (H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) Mtr. 11.00 1085.75 Five and Seventy Five Paise

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on Rupees One Hundred Fifty

wall with necessary clamps or in existing trench / pipe of following One and Fifty Paise Only

size of cables (B) 4 core 6 Sq. Mm

Rupees One Hundred Sixty

85 (C) 4 core 10 Sq. Mm Mtr. 62.00 168.67 Eight and Sixty Seven Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

Rupees Six Hundred Thirty

multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall

86 Mtr. 27.00 637.31 Seven and Thirty One Paise

with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with Rupees Eight Hundred Forty

necessary clamps or in existing trench / pipe at road crossing or Six and Thirty Eight Paise Only

floor of following size of cables. (A) 4 core 10 Sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi

Rupees Fifty Eight and Fifty

88 core 1.1 kv grade ISI marked copper wires of following size to be Mtr. 70.00 58.58

Eight Paise Only

erected as directed. (e) 1.50 Sq.mm 3 core round PVC sheathed

Making trench in soft soil of suitable width of 90 cm deep for laying

Rupees Fifty Five and Fifty

89 cable or locating the fault all over the run and back filling the Mtr. 140.00 55.55

Five Paise Only

same and making the surface as normal ground.

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

Rupees Sixty Two and Sixty

90 necessary connecting accessories of same material at required Mtr. 140.00 62.62

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable (A)50 mm outer dia

Rupees One Hundred Thirty

90.1 (D)120 mm outer dia. Mtr. 27.00 137.36 Seven and Thirty Six Paise

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be buried in ground to

have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both

side with internal and outside looking arrangement with look and Rupees Sixteen Thousand Six

91 keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is Ea 1.00 16691.26 Hundred Ninety One and

welded and other with nut and bolt for erecting Bakelite sheet. Twenty Six Paise Only

Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint

with water leakage proof & tested as per IP 55 test & followed by IS

2147 of 1962 (A) 150 X 90 X 75 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 95 cm long made from 40 X

X 6 mm thick MS angle.

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to operate

Rupees Three Thousand One

on 240V + 5%, 16A with, floating contacts Minimum switching setup

92 Ea 1.00 3168.37 Hundred Sixty Eight and Thirty

time 1 minimum & LCD display. Also comprised permanent ON/OFF

Seven Paise Only

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed.

Rupees Two Thousand Seven

Supplying & erecting power contactor ,AC3 duty for time switch

93 Ea 1.00 2782.55 Hundred Eighty Two and Fifty

complete erected as per direction Cat III (D) 4 pole 440V 40 Amp. Five Paise Only

Supplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-Off

street lights on time scheduling basis made from 16G CRCA sheet

Rupees Seventeen Thousand

duly epoxy power painted inside and outside with hinged doors

94 Ea 1.00 17059.91 Fifty Nine and Ninety One

and locking arrangement consisting of suitable size of 4 Pole MCB

and 4 pole contactor (cat-III)with analog time switch, auto manual

switch of same make and suitable input and output Bakelite

terminals and with door earthing approved by Engineer in charge.

Supply, Installation, Testing and Commissioning of suitable sweep,

BEE 5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC)

permanent ferrite magnet Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 Rupees Two Thousand Eight

95 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote Ea 4.00 2885.57 Hundred Eighty Five and Fifty

unit for Speed Control and all remaining accessories including Seven Paise Only

safety pin, nut bolts, washers, temperature rise = 75 degree C

(Max.), suitable for 140 to 285 Voltage and rectifier circuit with

surge, over current and overload protection , 50 Hz, Single phase

AC Supply, earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge] (B) 1200 mm Sweep (48")

Supplying & erecting single phase approved make industrial

Rupees Two Thousand Fifty

exhaust fan suitable for medium duty ring mounted low noise

96 Ea 1.00 2054.34 Four and Thirty Four Paise

operation suitable for medium duty having following dia size and

maximum speed in RPM [A] 305 mm dia 900 RPM

Supplying & erecting single phase approved make industrial

Rupees Three Thousand Nine

exhaust fan suitable for medium duty ring mounted low noise

97 Ea 3.00 3937.99 Hundred Thirty Seven and

operation suitable for medium duty having following dia size and

Ninety Nine Paise Only

maximum speed in RPM [E] 450 mm dia 1400 RPM

Providing & erecting Approved make Power Saving 50 Watt Ceiling

Fan with double ball bearing ISI mark with Condenser 230 volt A.C. Rupees One Thousand Nine

98 50 Hz 1200 mm sweep complete having 3blades with aluminium Ea 30.00 1948.29 Hundred Forty Eight and

blades with , canopy & 30 cms. down rod erected with Twenty Nine Paise Only

earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

Rupees One Hundred Eight

99 M.S. Pipe down rod erected duly painted for fan complete with Ea 4.00 108.07

and Seven Paise Only

proper insulation without leckage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and Rupees One Hundred Eight

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box and Seven Paise Only

complete erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan Rupees Eighteen and

hook or Fan box. Eighteen Paise Only

Rupees Three Hundred Sixty

102 Providing suitable M.S. louver shutter of the Exhaust fan. Ea 1.00 368.65 Eight and Sixty Five Paise

Supplying and erecting approved make Octagonal pole made

from HR sheet steel. The pole should be made as per IS. and shall

be coated with hot dip galvanizing as per IS 2629/2633/4759,

suitable suspend local wind speed with integral Junction box consist

of terminal plate of min 6mm Hylam sheet, standard profile

Rupees Twelve Thousand

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

103 Ea 10.00 12553.29 Five Hundred Fifty Three and

arrangement for cable termination to be erected With Suitable

Twenty Nine Paise Only

foundation (Included) as per details given by manufacturer

considering site requirement. (E) 7 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with 225mmX225mmX16mm base

plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 67 kg

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm.

Rupees Eight Hundred Nine

104 Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm Ea 10.00 809.01

and One Paise Only

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner. ( for 4 & 6 mtr pole)

Providing and erecting Street Light pole bracket comprising main B

Class GI pipe of 4.2 cm/require outside dia. complete with suitable

B Class G.I. sleeve tubing of approx. 45cms.length and suitable for

76.5 mm /80mm / required size of pole top having sufficient Rupees Seven Hundred

105 fasteners for fixing the brackets and having spread of 1.5.mtr. length Ea 10.00 728.21 Twenty Eight and Twenty

with 110 deg.with vertical plane & suitable welded stays, reducer One Paise Only

and with check nuts complete painted with one coat of Red oxide

/ PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

Rupees Three Hundred

to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to

106 Ea 7.00 373.70 Seventy Three and Seventy

6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown. (A) Tube Light with integral driver (iv)

24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name 160V to 270V,Power

Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire

107 Rupees Only

efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

shown.) (A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

Rupees Seven Hundred Fifty

107 (iv) 22-24 watts, Surge-2 KV Cat-lll Ea 11.00 758.51 Eight and Fifty One Paise

Rupees Four Hundred Twenty

107.2 (ii) 11-15 watts, Surge-2 KV Cat-lll Ea 5.00 427.23 Seven and Twenty Three

Rupees Two Hundred Twenty

107.3 (i) 5-9 watts,Surge-2 KV Cat-lll Ea 1.00 220.18

and Eighteen Paise Only

(B) LED Panel Light with provision for Plane front frame with Rupees Two Thousand Ninety

107.4 translucent cover fixed to housing complete.IP20 (vii) from 45 to 48 Ea 4.00 2091.71 One and Seventy One Paise

watts, 24" x 24", Surge-2 KV Cat-lll Only

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio Rupees Five Thousand One

108 >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > Ea 10.00 5175.24 Hundred Seventy Five and

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below Twenty Four Paise Only

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (C) Post Top Lantern LED fitting

comprises of finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto terminal

block.IP 65 (iii) Above 60 to 90 watts Cat III

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB Rupees Sixteen Thousand

109 for measuring instruments, earth bus & earth bolts, foundation Sq.Mtr 1.00 16392.30 Three Hundred Ninety Two

flange - bolts-base Plates, sufficient nos. of hinged doors, handles and Thirty Paise Only

with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with

epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding

base beams) The panel shall be supplied with following approved

manufacturers with following size. (C) The standard companies

switch gear shall be used and only manufacturers as per IEC

for beneficial use. (i) with 350mm depth

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. and above

Rupees Seventeen Thousand

at 415 V . having normal current rating 250A. with variable thermal

110 Ea. 1.00 17843.67 Eight Hundred Forty Three

& magnetic release suitable to work on A.C.supply 50 c/s. with all

and Sixty Seven Paise Only

internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 50 KA and above

Rupees Twenty Three

at 415 V having Normal current rating 400A. with variable Thermal

111 Ea. 1.00 23041.13 Thousand Forty One and

& magnetic release suitable to work on A.C.supply 50 c/s. With all

Thirteen Paise Only

internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Earth fault Relay suitable to

mount with inter connection suitable to following size of moulded

Rupees Five Thousand Nine

case circuit breaker having CT ratio & MCCB rating as following

112 Ea. 1.00 5956.98 Hundred Fifty Six and Ninety

along with shunt trip 220V AC. with all internal connections &

Eight Paise Only

complete erected in existing M.S.housing.. (3) 250 A -400 A , CT

Design, Supplying, installing, testing of factory fabricated ready

made Three phase APFC Panel Cubical Panel fabrication should be

type tested as per IEC 61921, 61439:1&2 Capacitor Duty Contactor

for switching as per following Steps Incomer Switch of MCCB type

Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault

protection Incomer Switch of MCCB type Icu=Ics=50KA at 400/440

Volts, with OC, SC, internal earth fault protection,Copper tinned

Rupees One Hundred Forty

insulated Busbar,Cubical panel should be indoor type with IP

Two Thousand Nine Hundred

113 and IK 10,Metalized polypropylene film tye3-phase 550Volt Ea 1.00 142942.27

Forty Two and Twenty Seven

Capacitor,De tuning Reactor for each capacitor,Panel having Short

Circuit and Overload protection,Each step Capacitor having

suitable MCB with Sc, OL, internal earth fault relay,Each stage

having Stage Contactor (Capacitor load rating),PF regulator master

controller having suitable steps with LCD display, Rs

Communication port, Indication LED Lamps for main incomer and

ON-OFF for each capacitor bank,MS Chanel for Floor mounting,

Cable entry as per site situation,Cooling fans for panel

Providing & Erecting full SS Body (SS 304) Split type water cooler

having storage capacity 160 to 175 Ltr.(Tank SS 304) & Cooling

capacity 150 ltr. Per hour @ an ambient temp of 350 C.The outlet

temp. of the water should drop by 150C within a hour,The water

cooler should be comprising of hermetically sealed Reciprocating

Rupees Sixty Seven Thousand

compressor with R134A, fan motor, Copper Condensing unit with

114 Ea 1.00 67256.91 Two Hundred Fifty Six and

company fabricated Outdoor Unit water tank surrounded by

Ninety One Paise Only

evaporating coil, thermostats, relay etc.complete with necessary

copper tube & Insulation, M.S Chanel Stand with Painting for water

tank & M.S. Powder Coated Stand for Outdoor unit with Installation.

With DPELCB and 4 Way DB Box with accessory Three core Cord for

Supplying & erecting reverse osmosis (RO) water purification system

with M.S. powder coated pedestal frame, prefilter housing carbon

filter suitable buster DC pump, auto low & high pressure switches

with following size of LPH capacity & erected as directed [E] 200 Rupees Ninety Three

LPH with 1 phase / 3 phase Raw water pump of 1000LPH @ Thousand Four Hundred Sixty

2.5kg/cm2 (1N0 - Kirloskar/CRI/Lubi) , Dual media filter 10"x54" (1 Eight and Forty Three Paise

No), Micron catridge filter 20" x 2.5" - (1No), High pressure pump Only

1000LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi) , RO Membrane

housing with RO membrane of 40*40 - ( 1 No),RO pressure tube 4" x

1E-(1No), 0-1200LPH Rotameter-(2 Nos). Recovery Rate 50%.

Providing & erecting open well horizontal mono block pump set

with cast iron body, complete for three phase submersible motor Rupees Seventeen Thousand

116 having [C] For 3 HP 3 phase open well horizontal mono block pump Nos 1.00 17279.08 Two Hundred Seventy Nine

set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head suitable and Eight Paise Only

for 50/65 mm dia delivery pipe Cat-ll

[D] For 5 HP 3 phase open well horizontal mono block pump set Rupees Twenty Thousand Six

116 suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for Nos 1.00 20621.17 Hundred Twenty One and

50/65 mm dia delivery pipe Seventeen Paise Only

Supplying and erecting Direct - On - Line Starter with 18 A. rating

contactor and with 3.5 Amp. 18A range directly operated in totally Rupees Two Thousand One

117 insulated elegant enclosure for single phase operation up to 3 HP as Nos 1.00 2100.80 Hundred and Eighty Paise

per IS 13947 complete erected on P.W. Block with necessary Only

connection. Cat-lll

Supplying & erecting approved make Automatic liquid level

Rupees Two Thousand Three

controller 6A. with sensor testing as per instruction of Engineer in

118 Nos 1.00 2355.32 Hundred Fifty Five and Thirty

charge on site complete with wiring connection with existing wires

with copper conductor from pump to upper and lower tank.

Supplying and erecting Fully Automatic hydro pneumatic booster

system with cast iron housing Enclosure class IP44 minimum , with

built in PTO motor protection and stainless steel impeller pump,

pump model GRUNDFOS CMB 5-46 series or equivalent with 24 Liter

hydro pneumatic pressurized tank capacity 8 m3/hr,Rated head Rupees Fifty Eight Thousand

119 :40 mtr, motor rating : 1.5 H.P. includes pressure switches, Non Return Nos 1.00 58940.57 Nine Hundred Forty and Fifty

Valve, Pressure Gauge, 5 way Brass connector, with necessary Seven Paise Only

Plumbing work of 25mm dia suction and delivery pipe which

includes all required size of pipes, Joints valves, Bypass valve, labor

all accessories required for installation of pressure pump (

Foundation work and base stand cost included)

SITC of following size of Grid Tied Solar Power Plant with Solar

Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, 0/p

Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power

Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C,

Anti-islanding Protection: Integrated, Input Reverse Polarity

Protection Integrated, Insulation Resistor Detection Integrated,

Residual Current Monitoring Unit Integrated, Output Over Current

Protection Integrated, Output Short Circuit Protection Integrated,

Output Over Voltage Protection Integrated, Protection Degree:

IP65, User Interface LCD & APP,Datalogger & Communication: GPRS

/ Wi-Fi, Module Mounting Structure: Seamless Box Pipe /'C' Channel

of suitable size for rooftop solar installations with good stability

agaist wind & weight load., Hot Dipped Galvanized steel coils.

suitable arrangement for base plate for foundation, solar panel

mounting, the structure should be suitable for carry the load of solar Rupees Forty Four Thousand

120 panel,wiring, sprinkler system etc. with necessary foundation PER KW 6.00 44081.45 Eighty One and Forty Five

work/wall mount, j bolt, anchor fastner etc. the nut bolt used for Paise Only

installtion of stucture should be (SS 304) quality. and Balane of

System with necessary Swithgears (Suitabel size and protection of

ACDB & DCDB), inter connecting wiring, earthing system, lightining

arrester system, all liasoning work with various gov. dipartment like

state nodal agency, DISCOM & CEIG is included in agency scope

Solar Panels (ALMM approved):TOPCon Solar Module Frame

Material: Anodized Aluminum alloy Frame With Twin Wall Profile,

Front Cover : High Transmission Low-Iron Tempered Glass (AR

Coated), High efficency and positive power tolerance Pmax: 0/+5,

Module Efficiency should be approx. 21%-22%, Normal operating

temperature 45'C, Junction Box with Waterproof IP68 & MC4

Compatible and Enclosed with Bypass diodes, 100%

Electroluminescence test to ensure error free Modules, Thep. temp.

co-efficient of the PV module shall equal or better than -0.45%/

Providing & erecting Automatic solar panel cleaning system for

solar power projects which includes necessary plumbing work

(UPVC pipes and accessories) from source of water to project site

Rupees One Thousand Nine

(upto 30 meters),Suitable size of sub mercible/ open well motor,

121 PER KW 6.00 1926.07 Hundred Twenty Six and

necessary wiring for motor and sprinkler system with safety, timer

Seven Paise Only

circuit for automatically on/off the sprinkler system, necessary size

oand number of nozzles/JET (minimum 1 Nozzle/Jet per module). (B)

5KW-10KW Cleaning System

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed

fan motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating

Rupees Forty Nine Thousand

unit and blower motor with its accessories by means of extra

122 Ea 1.00 49731.39 Seven Hundred Thirty One

supplied proper insulated copper tubing,drain PVC pipes suitable

and Thirty Nine Paise Only

for ( cost includes Eco Friendly green gas charging and 15A plug

top & Remote Control & MS Stand) with necessary core cutting.

(2)For 4/5 Star Rating of current year(B) for 1.5 ton capacity-

Supplying & installing MS standard type stand mounting for outdoor

Rupees Seven Hundred Forty

123 unit of Split A.C. upto 4 TR capacity erected with necessary Ea 1.00 746.39

hardware materials as directed. Six and Thirty Nine Paise Only

Supplying and erecting insulated pair of soft copper tubing open or Rupees One Thousand One

124 concealed including power and control cable,necessary PVC Rmt 1.00 1158.47 Hundred Fifty Eight and Forty

drain pipes for Split AC machine up to 4 TR capacity Seven Paise Only

Supplying & erecting D.C.P. type fire extinguisher for following

capacity cartridge type with gun metal cap 150 gram CO2 gas

Rupees One Thousand Seven

cartridge, powder and brackets confirming to IS 2171 1985 and

125 Ea 2.00 1712.96 Hundred Twelve and Ninety

complete erected with necessary clamps made from 50 x 6 mm M S

Flat with nuts and bolts grouted in wall complete. [A] For 5 Kg

Rupees Two Thousand Two

125 [B] For 10 KG Capacity Ea 2.00 2226.04 Hundred Twenty Six and Four

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

Rupees Six Thousand Five

following capacity with necessary clamps made from 50 x 6 mm

126 Ea 2.00 6591.26 Hundred Ninety One and

M.S. Flat with nut & bolts grouted in wall complete. [A] For 4.5 Kg

Twenty Six Paise Only

Rupees Eight Thousand Six

126 [B] For 5.5 / 6.5 KG Capacity Ea 2.00 8671.86 Hundred Seventy One and

Eighty Six Paise Only

Supplying & erecting ABC powder type 'Ceasefire' type Fire

Rupees Eight Hundred Forty

127 extinguisher as per IS 13849 or 1 Kg capacity with necessary clamp Ea 2.00 848.40

Eight and Forty Paise Only

for erection on wall

Rupees Ten Thousand Three

128 Getting GEB/TORRENT CONNECTION Liaising Charges. Each 1.00 10303.01 Hundred Three and One

SAY Total Amount

SAY Total Amount

I / We am / are willing to carry out the work at % above / below percentage (should be written in figures and words) of the estimated rates mentioned

above. Amount of my/our tender works out as under.

Estimated Amount put to Estimated Amount put to

Deduct % Below. Add % Above.

Net Rs. Total Rs.

Rs. In words Rs. In words

All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

All columns in the Schedule should be filled in ink and the total of the entire in the last columns should be struck by the contractor under his signature.

Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site, moisture, weather etc

To be continued on additional sheets, if found necessary.

The Labour Cess will be deducted as per prevailing rules i.e.1% of the work done.

The bituminous work shall be carried out by the contractor or as under by utilizing.

For abnormal high or law rates payment of such items shall be regulated as per Govt. Circular letter No. Parach-102008-61-S dated 27-11-2008 attached with tender papers.

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

10 S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.