Special Repairs and colour work to PSQ Cat B-16 (Block B-09,10,11)16 Unit)) at 36 Quarters Police Line Bhuj., Dist :- Kutch.(Including Electrification). (SBD) (5th Attempt)

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

(A) CIVIL WORK:

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, Rupees Four Hundred Ten and

1 flushing tank etc. including stacking the materials with all lead and lift. 3.00 No 410.13

Thirteen Paisa Only.

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

R.C.C member including stacking of serviceable material and disposal of Rupees Nineteen and Sixty Nine

unserviceable from site of work with all lead and lift. Paisa Only.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift. Rupees Forty Eight and Sixty

Three Paisa Only.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and

clamps including stacking the materials with all lead and lift ( for any dia, of pipe) Rupees Seventy Five and Ninety

Two Paisa Only.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking Rupees One Hundred Ninety and

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. Nineteen Paisa Only.

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior

plastering and finished even & smooth in C.M. 1: 3( 1 cement : 3 sand ) including Rupees Two Hundred Ten and

finishing with a floating coat of neat cement slurry at GROUND FLOOR. Five Paisa Only.

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior

plastering and finished even & smooth in C.M. 1: 3 (1 cement : 3 sand ) including Rupees Two Hundred Thirty Six

finishing with a floating coat of neat cement slurry at FIRST FLOOR. and Fifty Three Paisa Only.

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall

for interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 Rupees Two Hundred Nine and

8 sand ) including finishing with floating coat of neat cement slurry at GROUND 131.00 Sqm 209.72

Seventy Two Paisa Only.

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall

for interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 Rupees Two Hundred Thirty Eight

9 sand ) including finishing with floating coat of neat cement slurry at FIRST FLOOR. 131.00 Sqm 238.19

and Nineteen Paisa Only.

Provinding 10 mm thick cement PLASTER in single coat of interior plastering and

finished even and smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing

with floating coat of neat cement slurry including providing and mixing with WATER Rupees Two Hundred Twenty and

PROFFING material For FIRST FLOOR. Fifty Four Paisa Only.

Providing 20mm thick SAND FACED cement plaster on walls above ground level

consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick Rupees Three Hundred Twelve

finishing coat of C:M 1:1 (1 cement; 1 sand) etc. complete for any height.(Gutka and Fifty Six Paisa Only.

Providing and laying acrylic base (Zycosil or equivalent ) water proofing paint

treatment in two coat of vertical & horizontal surface of depressed portion of Rupees One Hundred Ten and

12 bath/WC as directed by Engineer in charge . This treatment shell be carried out 7.00 Sqm 110.70

Seventy Paisa Only.

over & above water proofing cement plaster..

Providing CEMENT VATA ( 10 cm. x 10 cm. )size quarter round in cement mortar Rupees Twenty Four and Four

13 1:1 including neat cement finishing, watering etc.complete

Paisa Only.

Providing and filling CINDER or any such similarly material including watering,

Rupees Seven Hundred Ninety

14 consolidation etc. complete. For all floors. 1.00 Cum 791.68

One and Sixty Eight Paisa Only.

Providing and laying cement concrete 1:2:4 (1-cement:2-coarse sand:4-stone

Rupees Three Thousand Seven

aggregates 20mmof nominal size) and curing etc.complete including cost of

15 1.00 Cum 3703.19 Hundred Three and Nineteen Paisa

formwork in foundation and plinth.

Providing and laying white glazed tiles 8 mm thick in flooring treads of steps and

landing laid on a bed of12mm thick cement mortar 1:3 (1-cement : 3-coarsesand ) Rupees Nine Hundred Fifty Three

finishing with flush pointing in white cement. and Fifty Eight Paisa Only.

Provinding & laying Printed / Coloured GLAZED TILES 8 mm thick in skirting, risers

Rupees One Thousand One

of steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand )

17 15.00 Sqm 1116.32 Hundred Sixteen and Thirty Two

& jointed with white cement slurry.(300mm x 600mm)

Paisa Only.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation (NSF) seal for potable water of Rupees Two Hundred Fifty One

18 following dia. nominal bore tube fittings and clamps including making good the wall, 21.00 Rmt 251.31

and Thirty One Paisa Only.

ceiling and floor etc. complete.[A] 25 mm.

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5)

PIPE having National Sanitation Foundation (NSF) seal For Portable Water of 32 Rupees Three Hundred Thirty Four

19 mm. dia. nominal bor tube fitting and clamps including making good the wall, 24.00 Rmt 334.89

and Eighty Nine Paisa Only.

ceiling and floor etc. Complete

oviding & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5)

PIPE having National Sanitation Foundation (NSF) seal For Portable Water of 50 Rupees Six Hundred Fifty Four and

20 mm. dia. nominal bor tube fitting and clamps including making good the wall, 54.00 Rmt 654.04

Four Paisa Only.

ceiling and floor etc. Complete

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter

with jali of the following nominal diameter of self cleansing design with C.I scread Rupees Five Hundred Sixty Eight

down or hinged grating including the cost of cutting and making good the walls. and Eighty Nine Paisa Only.

22 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with

'O' Ring 110 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or

double 'Y' with door, reducer, coupler single 'T' with door bend, G.I. Slotted Z patti Rupees Four Hundred Seventy

of 16 Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp with 42.00 Rmt 471.36

One and Thirty Six Paisa Only.

Washer Nut at every 1.50mt. vertical distance including All Labour Charges etc.

complete and making good the Wall, Ceiling and Floor.

23 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with

'O' Ring 75 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or

double 'Y' with door, reducer, coupler single 'T' with door bend, G.I. Slotted Z patti Rupees Two Hundred Forty Five

of 16 Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp with 65.10 Rmt 245.74

and Seventy Four Paisa Only.

Washer Nut at every 1.50mt. vertical distance including All Labour Charges etc.

complete and making good the Wall, Ceiling and Floor.

24 Providing & Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-

13592 of 90mm Dia Complete with Special flings, Compressor type Fittings, Wall

clips on wooden patty including making good the ceiling and floor on terrace rain Rupees Three Hundred Two and

water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical pipe and 90mm 60.00 Rmt 302.54

Fifty Four Paisa Only.

bend at the end near by Ground level rate are Inclusive of all Necessary Fittings

25 Providing and fixing in position PVC Cowelvent to pipe 75 mm dia as directed. Rupees Sixteen and Forty Seven

Joints shall be sealed by pipe sealant. 9.00 No 16.47

Paisa Only.

Providing and fixing in position PVC Cowelvent to pipe 110 mm dia as directed. Rupees Twenty Eight and Sixteen

26 Joints shall be sealed by pipe sealant. 9.00 No 28.16

Paisa Only.

Provinding and fixing water Closet Squatting (ORRISSA TYPE W.C. PAN ) size

Rupees One Thousand Three

580mm first quality including necessary "P" or "S" trap, including jointing the trap

27 9.00 No 1338.57 Hundred Thirty Eight and Fifty

with pan & soil pipe in viterous chine white colour, Joints shall be pipe sealent.

Seven Paisa Only.

Providing and fixing factory made polyvinyl chioride (PVC) door frame of the size

50 x 47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC

foam sheet, mitre out of two corners and joined with 2nos. of 150mm long brackets

of 15 x 15mm M.s. Square tubes. The two vertical door profiles are to be reinforced

with 19 x 19 mm m.s. square tube of 19 gauge, EPDM rubber gasket weather seal Rupees Three Hundred Fourteen

28 to be provided through out the frame. The door frame shal be fixed to the wall using 38.00 Sqm 314.88

and Eighty Eight Paisa Only.

65/100 mm long M.S. screws through the frame by using PVC fasteners. A

miniumum of 4 nos. os screws to be provided for each vertical members and

minium 2 nos. for horizontal members etc. complete as per manufactures

specification and direction of Engineer in charge.

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR

SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and

size of 19mm x 19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S.

frame shall have a coat of steel primers of approved make and manufacture, M.S.

frame shall be covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x

50 mm forming stiles, and 5mm thick 75mm wide PVC sheets for top rail, lock rail

Rupees One Thousand One

and bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC

29 38.00 Sqm 1135.02 Hundred Thirty Five and Two Paisa

sheet as gap insert for top rail and bottom rail, Panelling of 5 stiles and rails with

30mm wide x 5mm thick PVC sheet beading on eighter side, and joined together

with solvent cement adhesive,. An additional 5mm thick PVC strip of 20mm width is

to be stculk on the interior side of the ‘c’ channel using PVC solvent cement

adhesive etc. complete as per direction of Engineer in charge, manufacture’s

specification and drawing.

Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for jambs

and sills of doors & windows using neat cement slurry laid over 20 mm average

base of cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement

slurry including racking(Tancha Work) rubbing and polishing,scaffoldings,tools and Rupees Two Thousand Seven

tackles,scaffolding etc. complete(with base of neat cement) as per direction of Hundred Seven Only

Engineer in charge including rounding the exposed edges as directed.

Providing and fixing standard extruded of ALLUMINIUM SECTION of size 63mm x

38.10mm x 1.2mm (Jindal Section :20033,@Wt.0.593 kg per mt) with colour Rupees One Thousand One

31 anodized alluminium frame for ventilation with 5mm thick transparent bronze colour 8.00 Sqm 1163.92 Hundred Sixty Three and Ninety

tinted float glass as details etc complete for VENTILATION. Two Paisa Only.

Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated

from M.S. flat,square bars, round bars,c-channel, box pipe as per detail Drawings.

Rate is inclusive of welding with grinding smooth surface, two coats of Oil paint and

one coat of yellow Zinc Chromate primer coat of approved brand only. Oil paint Rupees Seventy Five and Ten

shall be Luxol Enamel paint of Berger Paint india limited. or asian paint apcolite Paisa Only.

premium gloss Enamel of asian paint or Dulux premium gloss enamel of dulux paint

Providing and fixing 4mm thick bajari glass bended in putty / wooden bedding patti

with scrapping of existing putty and glass in existing windows as directed by Rupees Seven Hundred Eight and

Engineer in charge. Ninety Two Paisa Only.

Providing and laying cement concrete flooring 1:2:4 (1- cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer and finished with a Rupees Three Hundred Thirty Five

floating coat of neat cement. (A) 50mm thick and Seventy Two Paisa Only.

providing and fixing precast Rectangle RCC frame with cover MD 10 Ton (rubber Rupees One Thousand Seven

35 mould finish) inner size 600*450mm with all necessary fitting. 15.00 No 1702.00

Hundred Two Only

Provinding and Fixing S.W Gully Trap without C.I. grating but brick masonary

Rupees One Thousand One

chamber and water tight CI cover with frame of 300 x 300mm size inside with

36 15.00 No 1176.94 Hundred Seventy Six and Ninety

standard weight (i) Square mouth traps (B) 150 x 100mm size P or R Type.

Four Paisa Only.

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE Rupees Three Hundred Eleven

37 VALVE 32 mm dia. 12.00 No 311.61

and Sixtey One Paisa Only.

Provinding and laying inegrated cement based proofing treatment of

required thickness over the roof including 10mm thick waterproofing

cement plaster in cement plaster in cement mortar1:3 and chaina mosaic

fitting and finally finishing the surfase with white cement slurry and

slopping out taerrace slabs with following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finishedslope shall not be less

then 45mm, including treating the vertical surfaseof the parapet wall up to Rupees Eight Hundred Ten and

20cms . height above finished level of terracing including finishing the top Ninety Eight Paisa Only.

with joint less water proofing plaster , curing , testing etc. complete. Rate

is including ten years performance of guarantee bond to be given on

stamp paper. (No extra shall be paid for increase in thickness for proper

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm.

of cement admixed with properly water proofing compound conforming to

IS -2645 and 10 mm thick water proofing cement plaster in Cement mortar

1:3 over the R.C.C.slab incl. cleaning the surface before treatment

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size

with 50% of cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick

water proofing cement plaster in cement mortar 1:3 (1 cement ,3 coarse

sand) admixed with proprietary water proofing compound conforming to

IS 2645 to required slope and treating similarly the adjoining walls up to

200mm height incl. rouding of junction of walls.

C) After Two Days of proper curing applying a second floor of cement

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint

less cement plaster of mix 1:3(1 cement :3 coarse sand )admixed with

proprietary water proofing compound conforming to IS :2645 and finally

finishing the surface with trowel with neat cement slurry

(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curring for final taste

All above operation to be done in order and as directed and specified by

the Engineer In Charge.

Painting one coats (excluding priming coat) on previously printed steel and other

metal surface with synthetic enamel paint, brushing to give an even shade Rupees Forty Five and Ninety Eight

39 including cleaning the surface of all dirt, dust and other foreign matter. 166.00 Sqm 45.98

Paisa Only.

Painting one coats (excluding priming coat) on previously painted wood and wood

based surface with enamel paint, to give an even shade including cleaning the of Rupees Fifty Seven and Fifty Five

all dirt, dust and other foreign matter. Paisa Only.

Celling painting (two coats) with plastic emulsion paint and manufacture on

undecorated wall surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and sand papered

smooth With Applying two coats of Fine Putty & One coats of primer and Rupees One Hundred Ninety

41 manufacture on new wall surface to give an even shade including thoroughly 484.00 Sqm 191.73 One and Seventy Three Paisa

brushing the surface free from mortar dropping and other foreign matter and sand Only.

papered smooth. paint, primer and putty shall be as per approved make list of

Wall painting (two coats) with plastic emulsion paint and manufacture on

undecorated wall surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and sand papered

smooth With Applying two coats of Fine Putty One Coat of Primer and manufacture Rupees One Hundred Eighty

42 on new wall surface to give an even shade including thoroughly brushing the 659.00 Sqm 181.42

One and Forty Two Paisa Only.

surface free from mortar dropping and other foreign matter and sand papered

smooth.paint, primer and putty shall be as per approved make list of GSPHCL

Finishing wall with Weather proof exterior emulsion paint on wall surface (Two

Coat) over and above applying one coat of primer to give an required shape even Rupees One Hundred Fifty

43 shade after throughly Brushing This surface to remove all Dirt and remains of loose 2435.00 Sqm 153.35 Three and Thirty Five Paisa

poweder material etc. complete. Primer paint, primer and putty shall be as per Only.

approved make list of GSPHC

Credit value for old Casement Type Window/Vantilation With M.S Grill and

44 removed from site and clean site. 8.00 Sqm 200.00 Rupees Two Hundred Only -1600.00

Credit Value for Door Shutter, Cupboard shutter and removed from site and clean

58.00 Sqm 150.00 Rupees One Hundred Fifty Only -8700.00

Total Civil (A) =

(B) Electric Work

46A Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X

sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC

insulated FRLS wire for earth continuity in FIA approved ISI mark medium

class white colour 20/25 mm dia. embossed rigid PVC pipe with Existing

Pipe with approved make 5/6 Amp. ISI make modular type switch and

accessories mounted in 20 G. G.I. company fabricated metallic box covered

Rupees Three hundred Forty

with appropriate front plate modules erected flushed with wall / ceiling with 205.00 Point 340.00

necessary modular lamp holder / modular ceiling rose / HD Connector as

directed for concealed wiring.(Deep Junction box 75mm depth if

required)(Make & Model approved by EIC and matching colour with switch

and accessories) Light point. Cat.-II.

Necessary sheet / tape / polythene / sand must be erected or filled in all box

to prevent mortar going into the box. Length of point wiring must not increase

than 10 mtr. For that necessary switch boards and their locations must be

finalised before execution by agency otherwise payment will not be done for

extra long point. (For future extention, if required, agency has to erect one

higher size metal box and modular plate as per instruction of EIC. Cost of

blank plate shall be paid as per tender item) [This item include cleaning

(inside/outside) of all G.I. switch boards, electric point box, fan box, MCBDB

& box cutting plaster finishing for modular plate without any gap] (Conductor

resistance should be as per IS:8130/1984)

46B For Bell Point, Cat.-II Rupees Three hundred Forty

16.00 Point 340.00

46C For Fan Point (with 6 A. Modular type switch and two module hum free EME

Five step type Electronic fan regulator both having ISI mark) Cat.-II 48.00 Point 502.00 Rupees Five hundred Two Only

46D For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI Rupees Three hundred Sixty

32.00 Point 369.00

mark) Cat.-II Nine Only

46E For Looped on switch board (with 6 Amp.Switch & 3/5 pin socket both Rupees Two hundred Thirty

80.00 Point 234.00

having ISI mark) Cat.-II. Four Only

47A Providing and erecting Medium Class FIA approved and ISI mark white

colour (embossed) RIGID PVC PIPES of following size complete erected

with necessary PVC fittings & Junction boxes fixed with adhesive solution &

clamps on / in wall / ceiling along with continuous fish wire to draw mains 700.00 Mtr. 24.00 Rupees Twenty Four Only

with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

47B 25 mm dia. 250.00 Mtr. 33.00 Rupees Thirty Three Only

48A Providing and laying Mains with FRLS PVC Insulated wire ISI marked

KV grade with Existing Pipe FIA approved ISI mark medium class 20/25/32

mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive

solution to be erected on/in brick wall / slab along with continuous G. I. fish

wire to draw mains laid in approved manner with FRLS PVC insulated wire

for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS 800.00 Mtr. 46.00 Rupees Forty Six Only

copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper

multi stranded conductor for earthing as per standard colour code.

(Conductor resistance should be as per IS:8130/1984)

48B 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with

sq.mm. FRLS copper multi stranded conductor for earthing as per standard

colour code. (Conductor resistance should be as per IS:8130/1984) 150.00 Mtr. 62.00 Rupees Sixty Two Only

48C 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with

sq.mm. FRLS copper multi stranded conductor for earthing as per standard Rupees One hundred Twenty

colour code. [conductor resistance should be as per IS:8130/1984] Only

49 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with

sq.mm (green) copper PVC insulated FRLS wire for earth continuity in FIA

approved ISI mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe with Open PIping PVC fitting fixed with adhesive solution

erected in wall/slab along with continuous G. I. fish wire to draw wires and

16 Amp Modular type Swich and accessories mounted in 20 G. GI company

fabricated metallic box covered with appropriate front plate modules erected Rupees Four hundred Ninety

64.00 Point 499.00

flushed with wall. (a) 16 Amp. Indicator switch & 1 No. 6/16 A universal Nine Only

socket white colour suitable for 3/5 pin top duly both having ISI mark.

(Necessary sheet / tape / polythene / sand must be erected or filled in all box

To Prevent Mortor Going In To The Box) Cat.-II. (Conductor resistance

should be as per IS:8130/1984)

50 Providing and fixing Plug Point wiring with approved ISI marked 1.1 kv 2 x

4.0 sq.mm copper PVC insulated FRLS wire with 2.5 sq.mm (green) copper

PVC insulated FRLS wire for earth continuity in FIA approved ISI mark white

colour medium class 20/25 mm dia. embossed rigid PVC pipe with Open

Piping PVC fitting fixed with adhesive solution erected in wall/slab along with

continuous G.I. fish wire to draw wires & finishing the surface to match the

wall / ceiling complete with 1 No. 16 Amp. Modular type Swich and 1 no.

16 Amp. universal 3 pin socket suitable for 3/5 pin top duty. [Both Having

Rupees Six hundred Forty Two

ISI mark must] mounted in 20 G. G.I. company fabricated metallic box 16.00 Point 642.00

covered with appropriate front plate modules erected flushed with wall.Above

accessories will be erected combined or separately as per site requirement

and instruction of EIC. Cat.-II. (Necessary Sheet Must Be Erected On All

Box To Prevent Mortar Going Into The Box) (Conductor resistance should be

as per IS:8130/1984) (A.C. Point) (Conductor resistance should be as

per IS:8130/1984)

51 Providing and erecting modular type accessories mounted on 20G G.I.

company fabricated galvanised metal box covered with approriate front plate

modules erected flushed with wall/Ceiling with 1 Nos. of 16 Amp SP 16.00 Each 502.00 Rupees Five hundred Two Only

indicator Switch & 3 Nos. of 6 Amp 3/5 pin plug. [For TV Switch board]

52 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe

with necessary socket, PVC bushes saddle, Check-nuts etc. complete of Rupees Thirty Paise Ninety

following sizes. Five Only

53 Providing & Erecting 2.0 mtr. long Earthing system by making minimum

bore of 225 mm dia. in soft soil. Suitable for doing pipe-in-pipe technology

earthing. Earthing electric rod must be made from Corrosion free hot dip

galvanizing pipes having following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class ISI

mark of Reputed Brand, Inner pipe: - 42 mm minimum O.D., Pipe B Class ISI

mark reputed Brand. Terminal Size: 70 mm X 100 mm length, Terminal

should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal. The hot deep galvanising must

be done after above process. Galvanised thickness must be minimum

micron anywhere. SS Nut bolt:- 2 nos. with washer suitable for 14 mm dia. Rupees Seven Thousand

hole must be provided at terminal. Total minimum Weight (approx.) of earth Twenty Five Only

electrode with inside conductive material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphur

content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain

moisture for long time. Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X

400 mm X 400 mm depth and Cover should be heavy duty cast iron with

required size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only]

[OEM has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must

be measured with earth tester. Agency has to bring the earth resistance to at

least 02 ohms & voltage between neutral & Earthing upto 02 volt. Agency

has to maintain earthing & its value for one year. Earthing must be done in

the presence of A.E. (GSPHCL)]

54 For Above Earthing Additional charges for boring in hard rock soil (By

Breaker) & filling soft soil in earth pit. (Certificate for soil have to given by Rupees Two hundred Seventy

DEE/AE along with Photographs). Six Only

55 Providing & erecting Fan clamp of 30x5 mm flat of required length & 10 mm

M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar. 48.00 Each 98.00 Rupees Ninety Eight Only

56 Providing, erecting, fabricating the M.S. structure as per requirement of site

as per structure design Including proper size approved by EIC of M.S.

angles, flats, bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI

Make) complete with cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care red oxide metal Rupees Seventy Five Paise Ten

primer,asian paint make with erection on site as per direction of engineer in 25.00 Kg. 75.10

charge with necessary grouting cementing, plastering and finishing

complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

57 Providing ad erecting approved make single phase Double Door metal

clad D.B. as per relevant indian standards ammended upto date.

Supplying and fixing following way single phase MCB distrubution board

of company fabricated sheet box with powder coated inside and outside after

apply seven tank chemical process of CRCA sheet cover complete with

suitable integral single piece construction tinned copper busbar and link with

all necessary interconnection and with necessary size MS frame for

mounting MCBDB. MCBDB Door, Back side and Body of MCBDB must be

made of 1.2 mm thick CRCA Sheet. Manufacturer must be provided (1) IP

and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass make

neutral & Earthing link with isolation & Protecting Cover for 240 Volts on

surface / recess complete with loose wire box, terminal connectors for all Rupees Four Thousand Nine

incoming and outgoing circuits, with suitable size FRLS PVC insulated 16.00 Each 4906.00

hundred Six Only

copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar,

din bar, detachable gland plate, interconnections, powder painted including

earthing etc.

Single phase incoming and horizontal single phase outgoing. For 12 Way

MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), 1 no. MCB 40 Amp. double pole switch (C curve confirms

to IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to

Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp:- 3 Nos.,

16 Amp:- 3 Nos. & 25 Amp: 2 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP) should be

used as same as MCBDB) [Including Necessary numbering / marking on box

done with red colour radium sticker as per site requirement and instructions

given by EIC on site. Font / number size given by EIC on site as per

requirement]

58 Supplying & erecting 12 mm thick backelite sheet of approved make and

grade on 25 x 25 x 3 mm red oxide painted angle iron frame suitable for

fixing ICDP SWITCH and energy meter (contractor shall make approved Rupees Two Thousand Two

5.00 Sq. Mtr. 2289.00

drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP hundred Eighty Nine Only

switch-busbar etc. as per Actual space available in electrical room at site)

59 Providing and Erecting Approved make ISI mark ELCB confirming to

IS:12640/1988 having serial number printed on it and having sensitivity of

mA and breaking capacity of 10 KA and suitable for 240 V, 50 Hz having

Rupees One Thousand Nine

characteristic of quick acting & Tripping with all advance feature & do not 4.00 Each 1950.00

hundred Fifty Only

incorporate any electronic component (mounted in MCBDB) Suitable for

operation on single phase 240 Volt max rating of (i) For 25 Amp. DP.

60 Providing & erecting 240 V MCB Double pole switch for Motor Inductive

load (C curve) having 10 KA breaking capacity & confirms to IS:8828 in Rupees Three hundred Twenty

Existing M.S. box having following capacity. For 40 Amp. Seven Only

Providing & erecting 240 V MCB Double pole switch for Motor Inductive

load (C curve) having 10 KA breaking capacity & confirms to IS:8828 in Rupees Two hundred Ninety

Existing M.S. box having following capacity. For 25 Amp. Seven Only

61 Supplying & fixing box for housing RCCB + MCB combination made of

SWG sheet steel duly powder coated with gasket, dust & vermin proof

bakelite shield two earthing terminals for following type of RCCB, RCCB + Rupees Two hundred Seventy

MCB [a] For 2 pole [Same company metal box used as MCB / ELCB 20.00 Each 272.00

used with earthing terminal with necessary Numbering / marking with

oil Paint by painter]

62 Providing & fixing Solderless crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts in an 800.00 Each 8.00 Rupees Eight Only

approved manner. [a] 1.5/2.5 to 6 Sq.mm

63 Providing and erecting busbar chamber confirming to IS-375 fabricated

from 16 GMS sheet dust & vermin proof having hinged door with rubber

gasket and necessary busbar supports with copper busbar having current

density not more than 1.6 amp/sqmm (Rated current per Cross Section area)

duly wired with colour insulating tape for phase sequence, three phase &

neutral Each equal & one meter long suitable for following current capacity Rupees Four Thousand Three

with necessary painting mounted on wall or pedestal frame of required size hundred Seventy Eight Only

with necessary incoming and outgoing connections with proper size of

copper strip/wire with lugs as directed. Suitable for 100 Amp. capacity

[make and model approved by EIC strictly as per tender specification]

64A Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS:694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. 80.00 Mtr. 56.00 Rupees Fifty Six Only

[e] One wire 6.00 sq. mm [For Meter to DPMCB Connection] [conductor

resistance should be as per IS:8130/1984]

64B For One wire 10.00 sq. mm [For Earthing] [conductor resistance should

be as per IS:8130/1984] 50.00 Mtr. 91.00 Rupees Ninety One Only

65 Dismantling the existing light, fan, bell, independent plug point, wiring with

mains of all types along with accessories etc. complete and handed over to 200.00 Point 1.00 Rupees One Only

66 Dismantling the existing switchgears, DB and Busbar of any size complete

with / without board or angle iron frame. 50.00 Each 7.00 Rupees Seven Only

Total Electric (B) =

Total Amount (A+B) =

Total Amount (A+B) =

Ex.Engg,(Ele.)(SP) I/c Ex. Engineer

Signature of the contractor. G.S.P.H.C.Ltd, G.S.P.H.C.Ltd. Rajkot