Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.5 LAccepted-AOC INFRA HOUSE CHURCH ROAD PALLINADA ERNAKULAM KERALA 682025 | ERNAKULAM | KERALA | 682025 | ₹22.5 L Quoted ₹22.9 L | L1 | Accepted-AOC Negotiated contract value |
| Sl No | Description | Qty | Unit | INFRA ELEVATORS INDIA PVT LTD L1 |
|---|---|---|---|---|
| 1.00ELEVATOR WORKS | ||||
| 1.01 | od67924/2023_2024 : Design, fabrication, supply, installation, testing and commissioning of machine roomless electric traction type Stainless steel 13 Pax (884 Kg) Passenger elevator with suitable car size (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc- except GST) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, simplex mode operation, operating panel with luminous buttons, over load warning indicator, battery operated alarmbell, LED type emergency light, intercom suitable for hook upto Purchasers' EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries, Safe landing device and Battery operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with pre-recorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE 3 or better efficiency) of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre/side opening stainless steel doors, Matt finish stainless steel car enclosure provided with stainless steel handrails on three sides,Granite flooring as applicable in accordance of following details:-5 stops & 5 openings and entrance & exit at same side and suitable for travel height of 15 mtrs. (Shaft Size 1950mm (width) x 2550mm (depth) ) with door opening of 900mm (width) and 2000 mm (height) .The equipment should be BMS compatible .All electrical components with wiring from the single point power supply provided in last landing near the elevator door.All components, fabrication and procedures of elevator system shall confirm to relevant IS standards/ Code and complete in all respects as per technical specifications. | 1 | no | 22,57,880 ₹22,57,880 Lowest |
| 2.00ELECTRICAL WORKS | ||||
| 2.01 | 9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.4 X 16 sq. mm (28mm) | 2 | set | 1,384 ₹2,768 Lowest |
| 2.02 | 90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp | 50 | metre | 484 ₹24,200 Lowest |
| 2.03 | 90.16.1.10 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.25 mm GI conductor (10 SWG) | 60 | metre | 111 ₹6,660 Lowest |
| 2.04 | od65452/2024_2025 : Supply, Installation, Testing & Commissioning of following isolator in metal enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.40A FP ISOLATOR | 1 | each | 3,492 ₹3,492 Lowest |
Tender Value
₹18.0 L
EMD Value
₹45,000
Closing Date
27 Jun 2025, 3:00 pmClosed
Managing Director
KITCO Ltd M M Gardens Church Landing Road Pallimukku Ernakulam
Supply and installation of Elevator at Govt Polytechnic College Mananthavady
2025_KITCO_769888_1
RE02/HED/KITCO/MH/09/2024-25
Open Tender
Electrical Works
Item Rate
180 days
Mananthavady
As per ITB
4 documents required · 4 mandatory
₹2,950
Yes
₹45,000
Yes
5 Aug 2026
17 Jun 2025
30 Jun 2025
17 Jun 2025
27 Jun 2025
18 Jun 2025
17 Jun 2025 - 19 Jun 2025
Amount
ELEVATOR WORKS
od67924/2023_2024 : Design, fabrication, supply, installation, testing and commissioning of machine roomless electric traction type Stainless steel 13 Pax (884 Kg) Passenger elevator with suitable car size (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc- except GST) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, simplex mode operation, operating panel with luminous buttons, over load warning indicator, battery operated alarmbell, LED type emergency light, intercom suitable for hook upto Purchasers' EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries, Safe landing device and Battery operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with pre-recorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE 3 or better efficiency) of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre/side opening stainless steel doors, Matt finish stainless steel car enclosure provided with stainless steel handrails on three sides,Granite flooring as applicable in accordance of following details:-5 stops & 5 openings and entrance & exit at same side and suitable for travel height of 15 mtrs. (Shaft Size 1950mm (width) x 2550mm (depth) ) with door opening of 900mm (width) and 2000 mm (height) .The equipment should be BMS compatible .All electrical components with wiring from the single point power supply provided in last landing near the elevator door.All components, fabrication and procedures of elevator system shall confirm to relevant IS standards/ Code and complete in all respects as per technical specifications.
ELECTRICAL WORKS
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
90.16.1.10 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.25 mm GI conductor (10 SWG)
od65452/2024_2025 : Supply, Installation, Testing & Commissioning of following isolator in metal enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.40A FP ISOLATOR
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .