Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.4 LAccepted-Finance LOCATION HIMACHAL PRADESH HP | SIRMAUR | HIMACHAL PRADESH | 171226 | L1 | Accepted-Finance L1 | |
| 2 | L2₹5.5 L+₹10,565.93 (1.97%)Accepted-Finance | L2 | Accepted-Finance L2 | |
| 3 | L3₹5.6 L+₹18,303.48 (3.41%)Accepted-Finance | L3 | Accepted-Finance L3 |
| Sl No | Description | Qty | Unit | Indu Furniture L2 | AKSHAY SHARMA L3 | abhishek guleria L1 |
|---|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/manaul means over areas in all width including getting out and disposal of excavated all leads ,lifts andcarriage of material as directed by theEngineer-incharge a) Ordinary rock. | 5.18 | Cubic Metre | 375 ₹1,942.5 | 350 ₹1,813 Lowest | 375 ₹1,942.5 |
| 2.00 | Providing and laying cement concrete of 1:4:8 (one cement :four sand ;eight stone aggregate 40 mm (forty milimetre) nominal size) excluding the cost of centering and shuttering -All work up to plinth level etc. complete in all respect as per satisfaction of Engineer -in-charge. | 0.65 | Cubic Metre | 5,800 ₹3,770 | 5,200 ₹3,380 Lowest | 5,500 ₹3,575 |
| 3.00 | Providing and laying in Plain cement concrete 1:1/2:3 (one cement : one and half coarse sand):three graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering -all work up upto plinth level etc. Complete as specied and specified and as directed by the Engineer-in-Charge. | 4.54 | Cubic Metre | 6,700 ₹30,418 | 6,500 ₹29,510 Lowest | 6,800 ₹30,872 |
| 4.00 | Steel work inbuilt up tubular (round,square or rectangular hollow GI tubes etc.) truss etc. including cutting,hoisting ,fixing in position including welding and bolted with special shaped washer etc. complete inall respect as per satisfaction ofengineer-in-charge (apolo/Jindal /TATA.a) Hot finished welded type tubes | 2,395.06 | Kilogram | 160 ₹3,83,209.6 | 165 ₹3,95,184.9 | 157 ₹3,76,024.42 Lowest |
| 5.00 | Providing and fiixng mild steel round holding down with bolts,plates and washers etc complete in all respect as per satisfaction of engineer-in-Charge. | 115.2 | Kilogram | 100 ₹11,520 | 105 ₹12,096 | 95 ₹10,944 Lowest |
| 6.00 | Providing and fixing precoated galvanised stell sheet Ridges plain (500-600mm) 0.50mm (+0.05%) total coated thickness,Zinc coating 120 grams per sqm asper IS: 277,im 240 mpa stell grade 5-7 microns epoxy promer on both side of the sheet and poyster top coat 15-18 microns using self drilling/self tapping screws complete in all respect as per satisfaction of Engineer-in-Charge.(TATA/Jindel/JSW make) | 12.9 | Running Metre | 525 ₹6,772.5 | 475 ₹6,127.5 Lowest | 500 ₹6,450 |
| 7.00 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by the enginner-in-Charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS:227 in 240 mpa styeel grade 5-7 microns epoxy primer on both side of the sheeet and poyster top coat 15-18 microns .Sheet should have protective guard film of 25 micrins minimum to avoid scatches during transportion and should be supplied in single length up to12 metre or as desired by the engineer-in - charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5x55mm) with EPDM seal ,complete up to any pitch inhorizontal /vertical or curved surfaces,excluding the cost of purlins,rfter and trusses and including cuttiung to size and shape whereever required etc. complete in all respect as per satisfaction of ENGINEER-IN-CAHRGE.(TATA/JINDEL/ MAKE) | 109.65 | Square Metre | 1,000 ₹1,09,650 | 975 ₹1,06,908.75 Lowest | 975 ₹1,06,908.75 Lowest |
Tender Value
₹4.0 L
EMD Value
₹8,100
Closing Date
18 Mar 2026, 10:00 amClosed
Executive Engineer (C)
o/o Estate organization UHF Nauni Solan
Construction of Shed for Biochar Machinery 12x6.50 Metre at R H R and TS jachh Nurpur Distt. kangra
2026_YSPU_130612_1
No.UHF/Const-1/Partfile/2025/ 3392dated 06.03.2026
Open Tender
Civil Works
Item Rate
90 days
jachh nurpur
Please refer Tender documents.
4 documents required · 4 mandatory
₹700
EE(D)
₹8,100
18 Mar 2026
6 Mar 2026
18 Mar 2026
6 Mar 2026
18 Mar 2026
6 Mar 2026
Earth work in excavation by mechanical means (Hydraulic excavator)/manaul means over areas in all width including getting out and disposal of excavated all leads ,lifts andcarriage of material as directed by theEngineer-incharge a) Ordinary rock.
Providing and laying cement concrete of 1:4:8 (one cement :four sand ;eight stone aggregate 40 mm (forty milimetre) nominal size) excluding the cost of centering and shuttering -All work up to plinth level etc. complete in all respect as per satisfaction of Engineer -in-charge.
Providing and laying in Plain cement concrete 1:1/2:3 (one cement : one and half coarse sand):three graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering -all work up upto plinth level etc. Complete as specied and specified and as directed by the Engineer-in-Charge.
Steel work inbuilt up tubular (round,square or rectangular hollow GI tubes etc.) truss etc. including cutting,hoisting ,fixing in position including welding and bolted with special shaped washer etc. complete inall respect as per satisfaction ofengineer-in-charge (apolo/Jindal /TATA.a) Hot finished welded type tubes
Providing and fiixng mild steel round holding down with bolts,plates and washers etc complete in all respect as per satisfaction of engineer-in-Charge.
Providing and fixing precoated galvanised stell sheet Ridges plain (500-600mm) 0.50mm (+0.05%) total coated thickness,Zinc coating 120 grams per sqm asper IS: 277,im 240 mpa stell grade 5-7 microns epoxy promer on both side of the sheet and poyster top coat 15-18 microns using self drilling/self tapping screws complete in all respect as per satisfaction of Engineer-in-Charge.(TATA/Jindel/JSW make)
Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by the enginner-in-Charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS:227 in 240 mpa styeel grade 5-7 microns epoxy primer on both side of the sheeet and poyster top coat 15-18 microns .Sheet should have protective guard film of 25 micrins minimum to avoid scatches during transportion and should be supplied in single length up to12 metre or as desired by the engineer-in - charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5x55mm) with EPDM seal ,complete up to any pitch inhorizontal /vertical or curved surfaces,excluding the cost of purlins,rfter and trusses and including cuttiung to size and shape whereever required etc. complete in all respect as per satisfaction of ENGINEER-IN-CAHRGE.(TATA/JINDEL/ MAKE)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.45 MB
tenderdocc.pdf
Tender Documents • 5.21 MB
BOQ_193109.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .