Upgradation and maintenance of Sub Circle office and rest house at Kansuwa, Distt. Kota

Amount

Description of items and specification of work to be excuted.

Dismantling G.S. Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) etc complete.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

cement plaster 15 mm on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing & Fixing the I-Section Beam (ISWB) 250x200 size for support including making of hole & bed for supporting the sand stone slab of Roof with packing material etc complete in all respect.

Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over structural steel sections including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab,70 to 75 mm thick (average)

Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: With common burnt clay F.P.S. (non modular) brick tiles of class designation 10

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete.(Size of Tile 600x600 mm)

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).(Second class teak wood)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second class teak wood

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Supply of Tap cock Somani

Supply of Pillar cock Somani

Supply of Angle valve Somani

Supply of PVC connection ISI made

Supply of Western WC (Somani

Supply of Shower with connection Somani

Supply of Wash bastion Somani

Supply of GI Pipe(mtr)@ 180 B-Class

Labour charges for fitting of pipe line and sanitary items etc. complete

Supply of PVC insulated 2.5 mm shingle core wire (Vimal)

Supply of PVC insulated 1.50 mm shingle core wire (Vimal)

Supply of PVC insulated 1 mm shingle core wire (Vimal)

Supply of PVC insulated 2 mm shingle core wire (Vimal)

Supply of Square Baten (10'-0") long (Anchor/Vimal)

Supply of Locking

Supply of Iron box 12 module

Supply of Regulator fan (Anchor/Bajaj)

Supply of Switch box 6 mp (Anchor/Vimal)

Supply of Socket box 6 mp (Anchor/Vimal)

Supply of Switch 16 mp (Anchor/Vimal)

Supply of Socket 16 mp (Anchor/Vimal)

Supply of Modular 3 box (Anchor/Vimal)

Supply of Bord 7x4 (Anchor/Vimal)

Supply of Bord 4x4 (Anchor/Vimal)

Supply of Holder modular (Anchor/Vimal)

Supply of MCB Box 8 no (Anchor/Vimal)

Supply of Insulator (3 am - 20 am) (Anchor/Vimal)

Supply of MCB 16 to 20 mp (Anchor/Vimal)

Supply of Giti 35'

Supply of Scerw 35.8

Supply of Scerw 4 inch.

Supply of 6 mm bit

Supply of 20 Watt LED tub light Bajaj/Philips

Supply of 9 Watt LED bulb Bajaj/Philips

Supply of Indictor Switch Anchor

Supply of Celling Rose (ISI mark)

Supply of Tap roll (ISI mark)

Supply of Screw 2 inch

Supply of Modi Pipe 2"

Supply of Fan Box (Anchor/Vimal)

Supply of Band modi

Labour charge for fixing to all electricals fitting etc. complete

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube.

A2Z ENGINEERING AND CHEMICALS (BID ID -3198295)