Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC BHAKURI CHALTIA BERHAMPORE MURSHIDABAD | BERHAMPORE | MURSHIDABAD | WEST BENGAL | 742101 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹2.5 L+₹656.68 (0.26%)Rejected-Finance 54 3 B N SEN ROAD PO KHAGRA BERHAMPORE MURSHIDABAD | BERHAMPORE | MURSHIDABAD | WEST BENGAL | 742101 | L2 | Rejected-Finance High | |
| 3 | L3₹2.5 L+₹1,222.79 (0.49%)Rejected-Finance | L3 | Rejected-Finance Higher |
Tender Value
Refer Docs
EMD Value
₹6,000
Closing Date
30 Jul 2024, 4:00 pmClosed
Executive Engineer
Office of the Executive Engineer Mechanical_Electrical Division Berhampore PH Engineering Dte Netaji Subhas Road P H E River Side Complex Berhampore Murshidabad PIN_742101
Providing, installation and commissioning of submersible pumping machinery along with allied Electro-Mechanical works for MMCH under Ground water based water supply scheme in Murshidabad District under Murshidabad Division, P.H.E. Dte. under MEDB, P
2024_PHED_715721_11
WBPHED/EE/MEDB/NIeQ-09 of 2024-25
Open Tender
MECHANICAL
Item Rate
15 days
Berhampore
Providing, installation and commissioning of submersible pumping machinery along with allied Electro-Mechanical works for MMCH under Ground water based water supply scheme in Murshidabad District under Murshidabad Division, P.H.E. Dte. under MEDB, P
6 documents required · 6 mandatory
₹6,000
8 Jan 2025
18 Jul 2024
1 Aug 2024
18 Jul 2024
30 Jul 2024
18 Jul 2024
Amount
PART A Supply delivery at site of Submersible pumping machinery directly coupled with water proof suitable size motor as per having following specification as per IS 8034, and IS9283 respely with standard MOC DISCHARGE : 55 cubic mtr./Hr. HEAD : 41 Mtr. *N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery. (B) Test Certificate of pump & motor should be submitted during delivery. Make PHED approved
Supply delivery at site of 4 Sq. mm. 3 core, water proof flat copper cable as per specification of IS694 N.B:- Cable should be supplied as per site requirement.
Supply delivery at site of 1.1 Kv Grade 25 sq. mm. 3-1/2core XLPE insulated Al .Ar. Armoured cable as per specification IS7098 . N.B:- Cable should be supplied as per site requirement.
Supply delivery at site of 100 Amp. TPN, 415V, main switch with rewireable type fuse link in sheet steel enclosure.as per direction of EIC
Supply delivery at site of 100 Amps.4 way wall mounted Bus-Bar chamber having 4 Nos. Copper Bus-Bar.as per as per direction of EIC
Supply delivery of S/D starter submersible pump rating ,3Phase,415V,50HZ ,relay range 13-20 Amp, with wide band coil. Make L&T MU-G10/Equivalent phed approved
Supply and delivery at site of 80 mm dia 3 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per as per direction of EIC
Supply and delivery at site of 80 mm dia 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per as per direction of EIC
Supply and delivery at site of 80mm dia CI top & bottom adopter and as per as per direction of EIC
Supply and delivery at site of Heavy type suitable dia MS suspension clamp along with nuts bolts and washer and as per standard specification of as per direction of EIC
Supply and delivery at site of 80mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90⁰ bend-2 nos. CI flanged tee- 1 no., CI flanged short piece -2nos ,flange etc. and as per IS standard specification as per direction of EIC
Supply and delivery at site of Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry and as per as per direction of EIC
Supply and delivery at site of Pressure gauge [Make- H. Guru/Febig] 102 mm. dia [0-7 kg/Sq.cm] brass cock and fitting complete [ This cost includes 15 mm. dia G.I. pipes and specials]
Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.
Supply delivery at site of Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump [This cost includes 15 mm. dia G.I. pipes and specials
PART B Installation of all items as mentioned in Sl.No.1 to 15 (Part-A) including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials, earthing arrangement of motors, starters, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation as per Hydraulic standard & IE rules in compliance with standard specification and upto entire satisfaction of EIC.
Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per standard specifiaction & direction of EIC.
Testing & Commissioning of the entire installation i.e. Pumps, Motors,valves etc. as in PART A of (Sl no. 1 to 18) as per direction and to the entire satisfaction of E.I.C.
Add GST @ 18%
Add CESS @ 1%
M/S. SUPER CONSTRUCTION
SREE RADHA ELECTRICAL
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .