ADDN ALTN TO ROOF TOP OF ALL SMQ AND OMQ PROVN OF PLATFORM FOR MIG 21 SALVAGE YARD AT LGS SECTION AT 17 FBSU AND IMPROVEMENT TO DSC REST ROOM BLDG NO 17 AT SAC UNDER GE AF TVM

Amount

Addn/Altn to Roof Tops of all SMQs and OMQs at 17 FBSU, AF

M & L for Formwork to sides of PCC copying to posts finished surface complete all as specified and as directed

M & L for PCC1:2:4 B1 (20 mm graded Stone aggregate) cement in foundations , for posts as specified and as directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St - 240 complete all as specified and directed

S & F Fe-410W(Gde-E-250) quality-B as in roof trusses (framed), trussed, pulins, fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including cleats, brackets etc complete

S & F steel section for wind ties for roof including securing bolts flat iron fillets including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Supply and fixing pre painted glavalume aluminium zinc coating GI based corrugated steel sheet minimum 0.50 mm thick of any colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, the base metal shall have hot dip metallic coating of AZ 200 steel substrate, the sheets shall be colour coated with minimum 20 micron silicon modified polyster/ super durable polyster over 5 micron on top and 5 micron backing coat on 5 microns primer on reverse side, fixed with self tapping screws as specified

Material and labour pre painted glavalume aluminium zinc coating GI based plain steel sheet of minimum 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, roof overing/cladding to wall,the sheets shall be colour coated with minimum 20 micron silicon modified polyster/ super durable polyster over 5 micron on top and 5 micron backing coat on 5 microns primer on reverse side fixed with self tapping screws as specified.

M & L for pre-cast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in CM 1:6,complete all as specified and as directed

M&L for Rendering 10 mm thick in CM 1:6 (mixing with liquid water proofing compound) to brick work or concrete surface finished even and smooth with out using extra cement complete all as specified and directed.

M & L for preparing new plastered surface and applying two coats of exterior emulsion acrylic weather proof on walls over a coat of primer, complete all as specified and as directed

M & L for preparation of new steel surfaces of any description and applying two coats of epoxy paint over one coat of appropriate epoxy primer as per manufacturers instructions and complete all as specified and as directed.

S & F of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as directed

S & F of 110mm bore half round PVC (SWR) rain water gutter pipes in any length with rubber ring joints including all arrangements required to fix to sides of roofing sheets all as directed .

Provision of platform for MIG-21 at 17 FBSU AF

Excavating over area, n exc 1.5 m deep and getting out in soft/loose soil.

Excavating over area, exc 1.5 m deep n.exc. 3m deep and getting out in soft/loose soil.

M & L for PCC 1:4:8 type D-2 using 40 mm graded aggregate in foundations filling and mass concrete complete all as specified and directed

M & L for Reinforced cement concrete Design Mix M-30 (20 mm graded aggregates) as in foundations, including rafts, footings, foundation beams: plinth beams: bases of columns, etc: basement slabs, under-reamed piles and mass concrete

M&L for reinforced cement concrete Design Mix M-30 (20 mm graded aggregates) as in Columns, pillars, piers, posts and struts

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams : and similar work : vertical or to better (Rough finished surfaces of concrete)

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions (Rough finished surfaces of concrete)

M & L for CRS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto all as item No 23 above but 5mm dia and cover upto and including 10 mm dia stirrups, spacers and binders

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

M & L for rendering 15mm thick in cement plaster 1 :6 on fair faces of brick work or concrete surfaces

M & L for 18-20 mm thick Granite (galaxy black colour) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and polishing complete all as specified and directed

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete(Fe 410-W (GdeE- 250) quality A )

M&L prepartion of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome complete all as specified and directed.

Returning filling in including spreading leveling watering in layer not exc 25 cm thick complete all as specified and directed

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level n.exc 1.5m above the starting point.

PROVN OF SALVAGE YARD AT LGS SECTION AT 17FBSU, AF

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out as in soft loose soil

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/loose soil for foundation etc or for shaft, wells, manholes, pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam , lintels , cantilevers including supports, over hangs etc also splays between floors and beams complete all as specified and directed .

M&L for RCC M30 (20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; and mass concrete complete all as specified and as directed.

M&L for Reinforced cement concreteM 30 (20mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and labour Rendering 15 mm thick cement plaster in CM 1:4 for fair faces of brickwork or concrete surfaces wall finished even & smooth without using extra cement.

Supply only integral water proofing compound of approved make.

Supply and fixing mild steel bolts, dia of neck exc 20mm n. exc. 25mm purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long embedded in RCC complete all as specified and directed

Material and labour Structural steel of plates, Fe-410 W (Gde E-250) Quality-B), channels, square cut or notched (ordinary or counter sunk) forming holes with riveted, bolted or welded attachments all as specified and directed

Material and labour for Mild steel work as in angle Iron, Channel section,flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and wind ties etc (thickness of metal n.exxc.6mm) making jointless by filling including cutting etc complete all as specified.

Material and labour Cement concrete type C2, 1:3:6 (40mm graded aggregate) 75 mm thick as in plinth protection including finishing of concrete surface even and smooth without using extra cement all as specified.

Material and labour for hard core of broken stone aggregate gauge not exceeding 63 mm deposited spread and leveled in layers n exc 15 cm thick, watered and well rammed to a true surface

Material and labour PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring with 75mm thickness

Material and labour 40 mm thick PCC 1:2:4 type B1 (Using 20 mm graded stone agg) as in floor finished even and smooth without using extra cement.

M & L for providing/ placing Glass dividing strips, 3 mm thick and inserted in position 38 mm width,complete all as specified and directed

Material and labour for Preparing New plastered surfaces of walls and applying two coat of oil acrylic emulsion over a coat of primer complete all as specified and as directed.

S & F of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and the directions of Engineer-in-Charge

S & F of Powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specifiedall complete as per architectural drawings and the directions of Engineer-in-charge.

Supply and fix sheet plain glass, ordinary quality, in squares n exc 0.5 sqm for each pane of 4 mm thickness all as specified and directed

Supply and fixing 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed.

S&F framed works as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel ,sheeting,or other covering ,running rails and guides)and hanging also fastenings and fixing complete.

S & F of 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling

Improvement to DSC restroom (Bldg No P-17) at HQ SAC (U)

Taking down Chowkhats or frames of any description exc. 1.5 sq. m and n exc 4.0 sqm each (without taking off shutters from the frames)

Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames)

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Net opening shall be measured for payment purpose only

S&F plain sheet glass 5.5 mm thick ordinary quality and glazing with oil putty/beading etc n. exc 0.50 Sqm each all as specified including removal of old broken glass, complete all as specified and directed.

S&F plain sheet glass 5.5 mm thick ordinary quality and glazing with oil putty/beading etc exc 0.50 Sqm each all as specified including removal of old broken glass, complete all as specified and directed.

M&L for false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595mm of approved texture, design and patterns, to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm per including both sides) comprising of main -T runners of size 24 x 38 mm of length 3000mm, cross -T of size 24x32mm length 1200mm and secondary intermediate cross -T of size 24x32mm of length 600mm to form grid moduled of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80grams per sqm) i.e. 12x50mm long dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm lenth and L-Shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25 mm flange to pierce into 12x50mm or even bigger size dash fasterner if require, fixed with galvanised iron perimeter wall angle or size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall S.S screws.With 15mm thick tegular/butt edged without perfoation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles confirming to JIS-Z 2801 and ASTM G-21, complete all as specified and directed.

S & F alumimum extruded section body door closer hydraulically regulated, designation No. 3, uniiversal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F venetian blind using cotton/Nylon fabric of size as required for windows/ Ventilators horizontally rolling up and down with double layer cloth including rolling device on top and power coated aluminium double layer pipe at bottom, incl operating rope etc all as specified and directed.

S& F power coated anolised aluminium frame for doors, door shutters, windows, ventilators/ partitions including necessary joining cleats, glazing clips, rubber neoprene packing, hanles, hinges anodised aluminium snap beading screws etc complete all as specified and directed.

M & L for 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work etc complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for preparation of new treated wall surface and applying plaster of paris putty of 1 mm thickness over plastered surface and applying two or more coats of 1st quality acrylic distemper (ready mixed) , of approved manufacturer over a coat of primer, of required shade and colour complete all as specified and directed.

M&L for prepration of old decorated surface of walls/ceiling and applying plaster of paris putty of 1 mm thickness over plastered surface and applying two or more coats of 1st quality acrylic distemper (ready mixed), of approved manufacturer over a coat of primer, of required shade and colour complete all as specified and directed.

M&L Second class hard-wood clean sawn, frame and fixed as in scantling/frame complete all as specified and as directed.

S&F stainless steel legs (75/100mm length) for display cases fixed with screws complete all as specified and as directed.

M & L 12mm thick Prelaminated plywood, prelaminated on both sides with decorative choice laminations, fixed with screws to timber frame work as in cupboards, warddrobes, covered cabinet etc including teak wood beading around the plywood/ teakwood lipping shall be finished with two coats of French polish. Note :- The rate shall be inclusive of all fittings required at site and as approved to the entire satisfaction of Engr-in-Charge/GE.

M & L 18/19mm thick Prelaminated plywood, prelaminated on both sides with decorative choice laminations, fixed with screws to timber frame work as in cupboards, warddrobes, covered cabinet, etc including teak wood beading around the plywood/ teakwood lipping shall be finished with two coats of French polish. Note :- The rate shall be inclusive of all fittings required at site and as approved to the entire satisfaction of Engr-in-Charge/GE.

S&F 75mm long half folded auto close hinges complete all as specified and directed. Make : Hettich or equivalent

S&F magnetic catcher fixed with screws including striking plate complete all as specified and as directed.

S&F decorative type handles brass, chromium plated for cabinet, drawers etc complete all as specified and as directed.

S & F mild steel 4 lever mortice lock, vertical type 100 mm size complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) 25mm thick as in floor subbase for receving of floor tiles complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

S&F in repair Vitreous China Wash down water closet pan (Pedestal pattern), white incl plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & incl P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed

S&F in repair PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.

S & F in repair Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling incl spreader complete all as specified.

M&L toughned glass 12 mm thick as in urinal partitions or in doors including all necessary acesseries like SS clips, handles, locks, spring etc cutting to shape, drilling holes as required, complete all as specified and directed by Engr-in-Charge.

S&F Table top Wash hand basin snow white 405mm dia including taking down old basin complete premium quality all as specified and directed. Make: Jaquar/CERA/Prayag or equivalent.

S&F in repair fancy type Bib taps CP cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore.

S&F fancy type two way Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore or for brass ferrule and fixed complete all as specified and directed. Make : Jaquar or equivalent

S&F Pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed.

S&F in repair Stop/angle valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe.

S&F Chromium plated shower roses with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified.

S&F Health faucet (ABS Body) premium quality mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Health faucet with 1meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer), complete all as specified and directed. Make: Jaquar/CERA/Prayag

S&F Tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws.

S&F glass corner shelf made out of 8 to 10mm thick glass guarded with CP brass guards complete all as specified and directed. Make : Jaquar or equivalent

S&F CP Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange fixing complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F 5mm thick glass mirror with double coat for protection and longevity, grounded edges for safety and silver plating on the back for better reflection, complete all as specified and directed. (Note : Size as required on site)

S&F Joist, channel, angle, or tee sections (Fe 410-W, Gde E-250, Quality-B), fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

M&L for preparation of old steel surface of any description over 10 CM width/girth and applying one coat of synthetic enamal paint complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections , including cleaning for re-fixing or removal from store complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections , including cleaning for re-fixing or removal from store complete all as specified and directed.

S&F 15mm bore pipe Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,

S&F 20mm bore pipe Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

Taking up or down 25 - 32mm dia steel tubing and connections , including cleaning for re-fixing or removal from store complete all as specified and directed.

S&F 32 mm bore pipe Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20cm girth

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete.

Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door

S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door

S&F PVC (SWR) reducers any radius 110mm bore

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access

PVC (SWR) vent cowl 75mm dia

M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement

Electrical Works Improvement to DSC restroom (Bldg No P-17) at HQ SAC (U)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc all as directed.

M&L for point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessories concealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 2 mm thick modular metal flush box and suitable modular white cover plate with frame etc all as specified and directed.

(a) One light /bell / fan point controlled by one switch/bell push

(c) One switch socket outlet 5 Amps on same board

(d) One switch socket outlet 5 Amps on independent board

All as per item No. 124 above but with copper conductor cable FRLSH 2.5 sqmm for one 3 pin socket outlet, 16 Amps concealed in wall/ ceiling and including provision of 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board

M&L for submain wiring with 2 Runs 4 Sq mm for phase and neutral and 1 runs of 4 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and aqccesssories and concealed in walls / ceiling all as specified including taking down old sub main wiring.

Supply and fix Modular switch 1 way 6A 1 module

Supply and fix Modular socket 6A 2/3 pin combined 2 module

Supply and fix Modular switch 1way 16 A 1 module

Supply and fix Modular socket 6A /16A 2/3 pin combined 2module

Supply & fix in repair modular type fan step regulator 360 Degree rotatable type 120W - 2 Module.

S&F in replacement of UNSV tube light fitting of 36/40 W with surface mounting rail for 20 w LED tube with Special intergral lamp holder and bracket including 20- watt LED tube complete with accessories internally , pre-wired connecting up with twin core flexible copper conductor cable of suitable size. make CG

S&F in replacement of UNSV tube light fitting of 1 X 11W/2X9 W Skecth fittings with surface mounting LED battern with Nano diffuer technivally to ensure minimum loss in light transmitted 10 Watt LED fittings including 10 watt tube rod complete with all accessories internally , pre-wired connecting up with twin core flexible copper conductor cable of suitable size. Make :CG

S&F Ceiling rose, surface bakelite, 65x50mm, two to three terminals AC,230 V complete all as specified and as directed

Taking down unserviceable MCB distribution board, S & F SPN 8 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed.

Supply and fix only the MCB 240V,50Hz, 'C' curve AC with repturing capacity 10kA of the following capacities all as specified and as directed.

(a) SP 5 To 32 Amp

(b) RCCB 40 amps sensitivity 100mA

Removing of exsiting Ceiling fan 1200mm/1400 sweep from postion, painting with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, kept in safe custody and refixing after completion of work to postion, alongwith required accessories in new postion as directed

Removing of exsiting Exhaust fan up 300mm/450mm sweep from postion, painting with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, kept in safe custody and refixing after completion of work to postion, alongwith required accessories in new postion as directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cuttting hole for fixing exhaust fan and making the surface good with the existing. Make: Almonard/Atomberg/Crompton/Usha/Havells

Supply and fix Antisuicide fan rod ( SMART FAN DOWN ROD ) of length 300 mm (12"), white in colour 19mm OD, 1.8mm +/-0.05mm thick , spring set bgrade 3 carbonsteel pipe zinc plated, MSME tested for performance test and opening of impact load of 22 Kgf+and spring hidden in pipe will expand to about 1 meter or more complete with dafty hole screw all as specified and directed .

Disconnecting and taking down the unserviceable earthing and M & L for Earthing complete with GI earth plate 60x60cm.x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate to a depth not less than 1.5m below ground level, connected to and including GI wire 4mm dia with GI protection pipe 15mm dia light grade connected upto DBs by means of bolts, nuts, check nuts and washers made of copper, galvanized iron pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50m, charcoal, lugs, common salt complete all as specified and as shown on plate No.3 of SSR Part-I

Removing existing Unserviceable recess mounting light fittings CFL 36 watt type and supply and fix recess mounting LED light fittings 1 x 33 / 36 watts LED panel system efficiency 36 W LED 6500 K model suitable for fitting in false ceiling complete all as specified and directed. Make : Havells/Wipro/Crompton

S&F in repiars building security light LED 20 watts complete with GI brakets not less than 1.2 Mtr made out of medium grade GI tubing complete all as specified and directed Make : Havells/Wipro/Crompton

M&L for cutting of hole on existing wall suitable size for fixing 250mm sweep exhaust fan and making good the disturbed surface incl plastering ,painting as per the existing colour all as specified and directed

Electrical Works Provn of Salvage yard at Logistic section at 17FBSU,AF.

M&L for point wiring with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multistranded copper conductor drawn in and including PVC conduit and all conduit accessories concealed and including provision of 1.5 sqmm PVC insulated copper cable FRLSH ISI marked as earth continuity conductor fabricated branded Modular metal flush box concealed in walls with Modular suitable plate with cover with suitable screws for housing switches socket outlets fan regulators etc. all as specified and as directed for the following: -

S&F MCB DB with sheet metal enclosure double door type concealed on wall single pole and neutral 4 way 240V with 200A rated bus bar all as specified and directed.

Supply and fixing 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole and Neutral in the MCB DB complete with connection testing and commissioning.

Supply and fixing 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning.

S&F LED decorative ultra slim round profile lighting fixture with extruded polycarbonate, environment friendly energy efficient of 4'x20W on wall/ceiling all as specified and directed.

Supply and fix energy efficient LED building security light Fitting 30 Watts for fixing on existing brackets with suitable GI reducer as per site requirement including three core flexible PVC 0.5 Sqmm cable for connection all as specified and as directed. Make: Wipro/Havells/Phillips

Supply and laying only in trenches or passing through pipes/ poles etc LT XLPE cable heavy duty 1100 Volts grade of size 10Sqmm x 2 Core with aluminium conductor of the following connections with provn of cable lugs and glands as required of following sizes.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for laying UG cable not exc 1.5m in depth and getting out in soft loose soil all as specified and as directed.

Returning and refilling of excavated soil up to a depth of 30 cm after riddling the excavated soil for Cushing of cable and refilling of trench with normal excavated soil all as specified and directed :-

Supply and lay in trenches burnt bricks sub-class ‘B’ size designation 75 for cable protection all as specified and as directed.

Supply and lay in trenches/under roads/crossings or fixed to wall/pole, GI tubing light grade of 32mm dia bore sizes for protection of UG cables including taking out old unserviceable pipes and remove from site :- Note : Payment for excavation and earth work shall be paid for separately under relevant items of Schedule.

Powertech Engineers (BID ID -3446678)

Archana Transport (BID ID -3447302)