Providing Repairs to the Open Gym Equipments at (1) Rehamat Nagar park in 15th division (ii) Telukula Chervu, Lolugu nagar parks in 10th division, (iii) Mahalakshmi temple park in 9th division (iv) Adarsha Nagar park in 16th division in RMC.

Supply, Delivery and Commissioning of Bearing Type 2-6203-2RS is a deep groove ball bearing with a 17 mm inner diameter, 40 mm outer diameter, and 12 mm width. It features two rubber seals (2RS) that provide effective sealing against contaminants like dust and moisture, making it ideal for enclosed or harsh environments. Made from high-quality chrome steel, it has a dynamic load rating of around 9,800 N and a static load rating of approximately 4,300 N. The bearing comes with CO (standard) clearance, is pre-lubricated, and requires no maintenance. It supports speeds up to 13,000-15,000 RPM (open) and about 8,000-10,000 RPM (sealed). Make: Svenska Kullagerfabriken Bearing including removal of old bearing and replacing with new bearing, WD-40 spraying, SKF greasing and Sky Craft Sand Paper to remove rust and soften the shaft, and all labour charges, all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of Bearing Type 3-6205-2RS1 is a deep groove ball bearing with a 25 mm inner diameter, 52 mm outer diameter, and 15 mm width. It features two rubber seals (2RS1) for enhanced protection against dust and moisture, making it suitable for harsh environments. Made from high-quality chrome steel, it offers a dynamic load rating of approximately 14,000 N and a static load rating of around 7,800 N. With CO (standard) clearance, it is pre-lubricated and maintenance-free, designed for speeds up to 9,500 RPM. Make: Svenska Kullagerfabriken Bearing including removal of old bearing and replacing vith new bearing, WD-40 spraying, SKF greasing and Sky Craft Sand Paper to remove rust and soften the shaft, all labour charges, all ransportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of Bearing Type 4-6207-2RS is a deep groove ball bearing with a 35 mm inner diameter, 72 mm outer diameter, and 17 mm width. It features two rubber seals (2RS) for effective protection against dust, dirt, and moisture, making it ideal for use in demanding or enclosed environments. Constructed from high-quality chrome steel, it offers a dynamic load rating of approximately 19.500 N and a static load rating of around 10.200 N. With Co (standard) clearance, the bearing is pre-lubricated and maintenance-free. ensuring long operational life. It supports speeds up to 9,000-10,000 RPM (open) and approximately 5,500-6,500 RPM (sealed). Make: Svenska Kullagerfabriken Bearing including removal of old bearing and replacing with new bearing, all labour charges, WD-40 spraying, SKF greasing and Sky Craft Sand Paper to remove rust and soften the shaft, all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of 12 mm circlip is a retaining ring used to secure components on a shaft (external type) or inside a bore (internal type). Made from high-strength spring steel or stainless steel, it typically conforms to DIN 471 (external) or DIN 472 (internal) standards. The circlip is about 1.0 mm thick, with finishes like black oxide, phosphate, or zinc plating for corrosion resistance. Including removal of old clip and replacing with new clip, all labour charges, all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of 25 mm circlip is a retaining ring designed to secure components on a 25 mm shaft (external type) or inside a 25 mm bore (internal type). It is typically made from high-strength spring steel or stainless steel and conforms to DIN 471 (external) or DIN 472 (internal) standards. The circlip is generally around 1.2 to 1.5 mm thick, depending on the type and manufacturer, and is available with corrosion-resistant finishes such as black oxide, phosphate, or zinc plating. Including removal of old clip and replacing with new clip, all labour charges, all transportation charges as directed by engineer in charge.

Supply. Delivery and Commissioning of rubber hand grip for gym equipment made from high-density rubber or TPR, designed for a firm, anti-slip hold. It typically measures 25-32 mm in outer diameter, 100-150 mm in length, and fits handle tubes of 20-28 mm inner 6 diameter. The surface is textured or ribbed for better grip and sweat resistance. It is durable, weather-resistant, and used on various fitness machines to improve comfort, safety, and control during workouts. Including all labour charges and all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of M8 x 16 bolt, a metric bolt with an 8 mm diameter and 16 mm length, typically featuring a 1.25 mm thread pitch. It commonly comes with a hex head and is made from steel or stainless steel, offering durability and strength. The bolt may have corrosion-resistant finishes such as zine plating to enhance longevity in various environments. Including all labour charges and all transportation charges as directed by engineer in charge

Supply, Delivery and Commissioning of plastic NOB for rotation, typically made from Nylon, Delrin (POM), or UHMW-PE, offering low friction, high wear resistance, and good strength. It is lightweight, self-lubricating, and ideal for rotating parts like rollers, bushings, or shafts in machinery. Including all labour charges and all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of Nylon washers, which are lightweight, non-corrosive spacers made from durable polyamide (PA6/PA66). They provide electrical insulation, vibration damping, and load distribution, with sizes typically ranging from M3 to M30 and thicknesses from 0.5 mm to 3 mm. Including all labour charges and all transportation charges as directed by engineer in charge

Supply, Delivery and Commissioning of PU rubber bushes are durable components made from polyurethane, offering high load capacity, wear resistance, and vibration damping. They typically have a hardness of 70-95 Shore A and resist oils, chemicals, and abrasion. Commonly used in automotive and industrial machinery for shock absorption and long service life. all labour charges, all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of 2.5-inch SS cap is a stainless steel pipe end cap, typically made from SS304 or SS316, used to close 11 2.5-inch pipes. It offers excellent corrosion resistance and durability Including all labour charges and all transportation charges as directed by engineer in charge

Supply, Denvery and commissioning of 1.5 inch ss cap is a stammess steel pipe end cap, typically made from SS304 or SS316, used to close 1.5-inch pipes. It offers excellent corrosion resistance and durability Including all labour charges and all transportation charges as directed by engineer in charge.

Welding work includes cutting, edge preparation, using MMAW, MIG, or TIG as per material type. Welders must be certified (IS:817/ASME Sec IX), and electrodes should meet IS:814 standards. Joints must be defect-free, with visual or NDT inspection as needed. Surfaces are to be cleaned, ground, and protected with primer or paint. All work must follow safety norms (IS:818) using proper PPE

Providing and applying one coat of zinc-chromate / red oxide / zinc-rich epoxy primer of minimum 40 microns dry film thickness (DFT) followed by two coats of synthetic enamel paint / polyurethane (PU) paint of minimum 50 microns DFT per coat to all exposed MS surfaces of outdoor gym equipment, including thorough surface preparation by cleaning, degreasing, removal of rust, loose scale, oil, and dust, rubbing down, scaffolding wherever required, and application by brush / spray to achieve uniform finish of approved make and shade, complete in all respects as per the directions of the Engineer-in-Charge.

Supply, Delivery and Commissioning of Bearing Type 2-6203-2RS is a deep groove ball bearing with a 17 mm inner diameter, 40 mm outer diameter, and 12 mm width. It features two rubber seals (2RS) that provide effective sealing against contaminants like dust and moisture, making it ideal for enclosed or harsh environments. Made from high-quality chrome steel, it has a dynamic load rating of around 9,800 N and a static load rating of approximately 4,300 N. The bearing comes with CO (standard) clearance, is pre-lubricated, and requires no maintenance. It supports speeds up to 13,000-15,000 RPM (open) and about 8,000-10,000 RPM (sealed). Make: Svenska Kullagerfabriken Bearing including removal of old bearing and replacing with new bearing, WD-40 spraying, SKF greasing and Sky Craft Sand Paper to remove rust and soften the shaft, and all labour charges, all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of Bearing Type 3-6205-2RS1 is a deep groove ball bearing with a 25 mm inner diameter, 52 mm outer diameter, and 15 mm width. It features two rubber seals (2RS1) for enhanced protection against dust and moisture, making it suitable for harsh environments. Made from high-quality chrome steel, it offers a dynamic load rating of approximately 14,000 N and a static load rating of around 7,800 N. With CO (standard) clearance, it is pre-lubricated and maintenance-free, designed for speeds up to 9,500 RPM. Make: Svenska Kullagerfabriken Bearing including removal of old bearing and replacing vith new bearing, WD-40 spraying, SKF greasing and Sky Craft Sand Paper to remove rust and soften the shaft, all labour charges, all ransportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of Bearing Type 4-6207-2RS is a deep groove ball bearing with a 35 mm inner diameter, 72 mm outer diameter, and 17 mm width. It features two rubber seals (2RS) for effective protection against dust, dirt, and moisture, making it ideal for use in demanding or enclosed environments. Constructed from high-quality chrome steel, it offers a dynamic load rating of approximately 19.500 N and a static load rating of around 10.200 N. With Co (standard) clearance, the bearing is pre-lubricated and maintenance-free. ensuring long operational life. It supports speeds up to 9,000-10,000 RPM (open) and approximately 5,500-6,500 RPM (sealed). Make: Svenska Kullagerfabriken Bearing including removal of old bearing and replacing with new bearing, all labour charges, WD-40 spraying, SKF greasing and Sky Craft Sand Paper to remove rust and soften the shaft, all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of 12 mm circlip is a retaining ring used to secure components on a shaft (external type) or inside a bore (internal type). Made from high-strength spring steel or stainless steel, it typically conforms to DIN 471 (external) or DIN 472 (internal) standards. The circlip is about 1.0 mm thick, with finishes like black oxide, phosphate, or zinc plating for corrosion resistance. Including removal of old clip and replacing with new clip, all labour charges, all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of 25 mm circlip is a retaining ring designed to secure components on a 25 mm shaft (external type) or inside a 25 mm bore (internal type). It is typically made from high-strength spring steel or stainless steel and conforms to DIN 471 (external) or DIN 472 (internal) standards. The circlip is generally around 1.2 to 1.5 mm thick, depending on the type and manufacturer, and is available with corrosion-resistant finishes such as black oxide, phosphate, or zinc plating. Including removal of old clip and replacing with new clip, all labour charges, all transportation charges as directed by engineer in charge.

Supply. Delivery and Commissioning of rubber hand grip for gym equipment made from high-density rubber or TPR, designed for a firm, anti-slip hold. It typically measures 25-32 mm in outer diameter, 100-150 mm in length, and fits handle tubes of 20-28 mm inner 6 diameter. The surface is textured or ribbed for better grip and sweat resistance. It is durable, weather-resistant, and used on various fitness machines to improve comfort, safety, and control during workouts. Including all labour charges and all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of M8 x 16 bolt, a metric bolt with an 8 mm diameter and 16 mm length, typically featuring a 1.25 mm thread pitch. It commonly comes with a hex head and is made from steel or stainless steel, offering durability and strength. The bolt may have corrosion-resistant finishes such as zine plating to enhance longevity in various environments. Including all labour charges and all transportation charges as directed by engineer in charge

Supply, Delivery and Commissioning of plastic NOB for rotation, typically made from Nylon, Delrin (POM), or UHMW-PE, offering low friction, high wear resistance, and good strength. It is lightweight, self-lubricating, and ideal for rotating parts like rollers, bushings, or shafts in machinery. Including all labour charges and all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of Nylon washers, which are lightweight, non-corrosive spacers made from durable polyamide (PA6/PA66). They provide electrical insulation, vibration damping, and load distribution, with sizes typically ranging from M3 to M30 and thicknesses from 0.5 mm to 3 mm. Including all labour charges and all transportation charges as directed by engineer in charge

Supply, Delivery and Commissioning of PU rubber bushes are durable components made from polyurethane, offering high load capacity, wear resistance, and vibration damping. They typically have a hardness of 70-95 Shore A and resist oils, chemicals, and abrasion. Commonly used in automotive and industrial machinery for shock absorption and long service life. all labour charges, all transportation charges as directed by engineer in charge.

Supply, Delivery and Commissioning of 2.5-inch SS cap is a stainless steel pipe end cap, typically made from SS304 or SS316, used to close 11 2.5-inch pipes. It offers excellent corrosion resistance and durability Including all labour charges and all transportation charges as directed by engineer in charge

Supply, Denvery and commissioning of 1.5 inch ss cap is a stammess steel pipe end cap, typically made from SS304 or SS316, used to close 1.5-inch pipes. It offers excellent corrosion resistance and durability Including all labour charges and all transportation charges as directed by engineer in charge.

Welding work includes cutting, edge preparation, using MMAW, MIG, or TIG as per material type. Welders must be certified (IS:817/ASME Sec IX), and electrodes should meet IS:814 standards. Joints must be defect-free, with visual or NDT inspection as needed. Surfaces are to be cleaned, ground, and protected with primer or paint. All work must follow safety norms (IS:818) using proper PPE

Providing and applying one coat of zinc-chromate / red oxide / zinc-rich epoxy primer of minimum 40 microns dry film thickness (DFT) followed by two coats of synthetic enamel paint / polyurethane (PU) paint of minimum 50 microns DFT per coat to all exposed MS surfaces of outdoor gym equipment, including thorough surface preparation by cleaning, degreasing, removal of rust, loose scale, oil, and dust, rubbing down, scaffolding wherever required, and application by brush / spray to achieve uniform finish of approved make and shade, complete in all respects as per the directions of the Engineer-in-Charge.

Details of Maximum amount reimbursable to the Contractor.

1) Provision for GST @18%

2) Provision for NAC @ 0.10%