Constructioon of Kishan Bhawan at Nihiri under IPH Division Nhiri Distt Mandi

Amount

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm. layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-charge.

Cutting in earth work and disposal of excavated earth in all kinds of soil in pick work, jumper work and ballasting work complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge in all leads and lifts.

Providing and laying cement concrete 1:3:6 (1 cement :3 sand :6 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Boulder filling dry hand packed tightly under floor complete in all respect.

Providing and laying (Heavy duty ) precast cement concrete interlocking paver blocks vibro compacted upto M-50 grade including border for curb block grey or colouted sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mix with pigment to match the shade of blocks including curing rubbing and polishing complete sub base concrete floor to be paid for 60mm thick interlocking blocks complete in all respect.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Random Rubble Masonry / polygonal rubble masonry (uncoursed / brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortor 1:6 ( 1 cement : 6 sand) (1cement :6 sand) complete

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in all leads and lifts in:- Foundation footing bases of columns etc and mass concrete.

Columns, pillars, post and struts,Square, rectangular or polygonal in plan.Beam, cantilever, girders and lintels.

Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like (i) Floors etc. up to 200 mm in thickness.

Edges of slab and breaks in floors and walls under 20 cm wide.

Stair cases with sloping or stepped soffits excluding landings.

Providing & Laying cement concrete work 1:11/2: 3 (1 cement : 11/2 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work complete in all respect in all leads and lifts in:-(i) Foundation footing bases of columns etc and mass concrete.

Colunms pillars posts and struts upto floor two level.

Lintels, beams girders bressumers and cantilevers upto floor two level.

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement in all leads and lifts in:-Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.(i) Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.

Stair cases (Except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.

Providing mild steel / Tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level. Tor Steel

Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint(i) In trusses and trussed purlings in buildings.

Providing & fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coatig including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing ridges or hips 60 cm over all in plain with galvanised iron prepainted steel Sheet fixed J or L hooks bolts and nuts 8mm dia G.I Limpet and bitumen washers complete 0.60 mm thick sheet complete in all respect in all leads and lifts.

Providing and fixing 15 cm wide 45 cm over all semicircular with iron plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connection with rain water pipe complete as per design. 0.80 mm thick sheet complete in all respect.

Provdiing and laying 20 cm thick composit stone masonry with stone masonry with stone facing of chisel dressed stone one line dressed in cement mortar 1:6 (1 cement :snnd) and concrete backing with cement concrete 1:3:6 (1cement :3and :6 graded stone aggregate 20 mm norinal size) on inner face of walls including cenrting shuttering and propping complte upto floor two level complete in all respect.

Brick work using common burunt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:6 (1 cement : 6 sand) (Ist class brick) complete in all respect.

Half bricks masonry in common burnt clay building bricks in cement mortar 1:4 (1cement : 4 sand) (Ist class brick) complete in all leads and lifts.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position. (Ist class Indian Teak Wood) complete in all leads and lifts.

6mm cement plaster to ceiling in CM 1:3 ( 1 Cement : 3 Sand) complete in all leads and lifts.

15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:5 (1 cement: 5 sand) complete in all leads and lifts.

20 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor two level including arrisses, internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:3 ( 1 cement : 3 sand ) complete in all leads and lifts.

Stone soling under floor complete in all leads and lifts.

Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth complete in all leads and lifts.

Providing and laying granite stone in flooring 20mm (average) thickness base of cement mortor 1:3 (1cement : 3sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20 mm thick.

Providing and laying Duro stone vetrified tiles 300x300x10mm in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortor 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete in all leads and lifts.

Providing and laying vetrified double charge tiles 600x1200x10mm in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortor 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete in all leads and lifts.

Providing and fixing toungued and grooved planking in floor and fixing to wooden base frame with iron screws complete in all respect (i) 25mm thick

Providing and fixing antiskid water proof stain and impact resistent heavy duty vetrified tiles Nitco or equivelent (300 X 300 X 10 mm) manufactured of approved shade and colour treads of steps laid on a bed of 12 mm thick cement mortor 1:3 (1cement : 3 sand) finished with flush pointing in white cement mixed with pigment ofrequired shade to match the shade of tiles complete in all leads and lifts.

Coloured glazed tiles 6 mm thick (300x450 mm) in skirting risers of steps and dedo12 mm thick cement mortar 1:3 (1 cement : 3 sand) and jointed with cement slurry complete in all leads and lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. (Ist class Teak Wood) complete in all leads and lifts.

Providing and fixing wire gauge shutters using galvenised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors, windows & clearstory windows i/c bright finished black iron enamelled hinges with necessary screws 40 mm thick (2nd class indian Deodar wood) complete in all leads and lifts.

Providing & fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws (ornamental grills) complete in all leads and lifts.

Providing 40x3 mm iron hold fast 40 cm long including fixing to frame with 10 cm da bolts nuts and wooden pluges and embencing in C.C. block 30x10x15 cm 1:3:6 ( 1 cement:3 sand: 6 graded stone aggregate 20 mm nominal size) complete in all leads and lifts.

Providing and fixing bright finished brass sliding door bolts with bolts and nuts screws etc. complete in all leads and lifts (i) 300x16mm

Providing and fixing bright finished brass tower bolts ( barel type) with screws etc. complete (i) 200x10mm

(ii) 150 x 10 mm

(iii) 100 x 10 mm

Providing and fixing bright finished brass handles with necessary screws etc. complete (i) 125mm dia

Providing and fixing bright finished hard drawn Hooks and Eyes 250 mm complete.

Providing and fixing of Block Board( pre Laminated particle board) wooden Cup Board of size 19 mm. anti termite and dampness proof including all materials and fittings etc. in all leads and lifts as per the entire satisfaction of the Engineer-in -Charge.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20 mm nominal size complete in all leads and lifts.

Proving under layer for plinth protection of 75 mm thick (unconsolidated) bed dry brick/stoneAggregated 40 mm nominal size will rammed with rammed and consolidated and grouted with fine sand including preparation of ground complete in all leads and lifts.

Constructing course rubble hammer dessed "U" shape open surface drain with side wall 15x22 cm in cement mortor 1:6 (1cement : 6 sand) and inside plastering with cement plaster 1:3 (1cement : 3 sand) including earth work and laayng 10 cm cement concrete in 1:5:10 (1 cement :5 sand : 10 graded stone aggregate 40 mm nonminal size) and 7.5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete .

Applying one coat of Acrylic primer on new concrete / masonry / plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all leads and lifts.

Applying one coat for wood preservative on previously treated wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter,sand papering and knotting complete in all leads and lifts.

Applying priming coat over new wood and wood based surfaces after and inciuding preparing the suface be thoroughly cleaning oil grease dirt and othr foreign sand papering and knotting Readymixed paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaningthe surface of dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white.

Providing & fixing Stainless Steel Railing of 304 grade (ISI) of approved brand complate in all respect in all leads and lifts.

Manufacturing and fixing of cup board made with ply board 19 mm thick of Anchor,Kit GMS make including all fitting such as hings,handels,magnetic catcher and sliding channel etc.The exposed portion of the cup board shall be provided with mat finish sunmica not less then 1 mm in thickness pasted with favicol.The door and exposed edges shall be provided moulding to give the cup board decorative look as directed by engineer incharge.The cup board shall be painted with two coats of white paint in side.The entire work should be as per direction/satisfaction of Engieer in Charge.

Furniture items :- Providing and supply of Sofa set ( Seven Seater) of wood filled with and coverd with cotton silk cloth complete in all respect

Providing and supply of Sofa set ( Five Seater) of wood filled with and coverd with cotton silk cloth complete in all respect .

Providing and supply of premium quality Double bed box made with 16mm thick ply board heaving size of 72"X78" complete in all respect.

Providing and supply of Double bed box made with 16mm thick ply board heaving size of 72"X78" complete in all respect.

Providing and supply of center table frame of wood , top of toughened glass 10mm thick and size 2'X4' complete in all respect.

Providing and supply of rectangle Dining set six seater wood , top of toughened glass 10mm thick and size 3'X4' complete in all respect.

Providing and supply of side table made with ply board having size 12" X 18" complete in all respect.

Providing and supply of wooden rocking chair complete in all respect.

Providing and supply of wooden Dressing table with mirior ans stool complete in all respect.

Providing and Instlation of premium quality wooden Bed Room chair complete in all respect.

Providing and fixing computer /study chair revolving Executive Type (Godraj make) for VIP bed room complete in all respect.

Providing and fixing sleep well mattresses (spring fresh 75x35x6" thick).in VIP Bed Room 2nd Floor complete in all respect

Providing and fixing sleep well mattresses(72x35x4" thick)( Ground floor 2 Pair & 1st Floor 2 Pair complete in all respect.

Providing and supply Pillows of superior quality (686x432x100mm) complete in all respect.

Providing and supply bed sheet with pillow cover of superior quality(for double bed of standard size) complete in all respect.

Providing and supply single bed sheet with pillow cover of superior quality of standard size complete in all respect.

Providing and supply bed cover for VIP bed room of superior quality complete in all respect.

Providing and supply white sheet cotton type of superior quality complete in all respect.

Providing and supply double bed quilts with cover poly-fill type of superior quality for VIP bed 1+1 standby complete in all respect.

Providing double bed quilts with cover poly-fill type of superior quality for Gust Room complete in all respect.

Providing and supply blankets (Dubble bed) of superior quality complete in all respect.

Providing and fixing room curtains made of superior polyster embroidered sheet fabric, average length of cutrain 260cm with s.s. eyelet rings complete in all respect.

Providing and fixing 25mm dia Jindel (JARDOS) make stainless steel curtain rod, stainless steel heavy brackets 100mm size with stianless steel side ends 50mm dia complete.

Providing and supply room heater 1500W each with heavy reflector (Bajaj, Usha make) complete

Providing set of bathroom bucket (20 ltrs) mug, patra, soap, harpik toilet cleaner, toilet brush etc. (milton make) complete

Providing and supply hand towel 40x60cms of superior quality complete in all respect.

Providing and supply bath towel 120x60cms size superior quality complete in all respect.

Providing and supply PVC dust bin padel type operation for rooms and toilet complete in all respect.

Providing and supply table coster of superior quality complete in all respect.

Providing and supply small sized foot mat for rooms.toilet of superior quality complete.

Providing and supply fine bone china diner set of superior quality for VIP room

Providing and supply fine bone china tea set of superior quality for VIP room

Providing and supply water glass of superior quality.

Providing and supply portable PVC chair( Cello make) of superior quality.

Providing and supply hangers for cup boards of superior quality.

Providing and supply Usha make room heat convector (heavy duty) complete.

Providing and supply room carpet (cushion type) 180x120 size) hand made of superior quality for Drg+VIP rooms

Providing and supply 90x60 cms decorative room painting of superior quality

Providing and fixing double door refrigator (Pansonic, LG, Godraj, Samsung, whirlpool etc. 310 ltrs.of reputed make.

Providing and fixing 43" LED television reputed make of reputed make.

Providing anf fixing water purifier LG Aqua guard(RO-UV) of reputed make.

Providing LPG connection (commercial with DBC) complete.

Providing LPG burner (4 Burner) of superior quality.

Providing LPG burner (2 Burner) of superior quality.

Providing following kitchen items:- Providing and supply pressure Cooker 10 liter of reputed make.

Providing and supply pressure cooker 5 liter of reputed make.

Providing and supply pressure cooker 3 liter of reputed make.

Providing and supply Large aluminium pans 50 ltr.(SS) of superior quality.

Providing and supply Medium pans (SS) of superior quality.

Providing and supply Tea pans(SS) of superior quality

Providing and supply Service tray 45x30cms (Aluminium) of superior quality

Providing and supply Soopns stainless steel of superior quality.

Providing and supply Dinner set melomoware (Lapola)of superior quality.

Providing and supply Tea set of superior quality.

Providing and supplyTea cups (Hotel series) of superior quality.

Providing and supply Water glasses (225 ml.capcity) of superior quality.

Providing and supply Service spoons (SS) of superior quality.

Providing and supply Water Jug (SS) 1.500 ltrs. cap of superior quality.

Providing and supply Steel tumbler of superior quality.

Providing and supply Karchi stainless steel (small, medium and large) 2 each of superior quality.

Providing and supply Knives of superior quality.

Providing and supply Full rice plates( melmoware) complete in all respect.

Providing and supply Quarter plates of superior quality.

Providing and supply Service bowls of superior quality.

Providing and supply Chakla, Belna, Tava, Tea seave & Mis: Small kitchen items of superior quality.

Providing and supply Empty plastic jars (1 ltr) of superior quality.

Providing and supply SS Grain storage 20 ltrs. Drum of superior quality.

Providing and supply Stainless steel full plate of superior quality

Providing and supply Fry pan of superior quality.

Providing and supply Karahi of superior quality

Providing and supply Microwave of superior quality.

Providing and supply chair for meeting hall made of steel frame 40 density cushion, superior fabric with arms.

Providing and supply Godrej make Chair for Chairman ( FOR Meeting )

Providiing and fixing plastic chair (Neel Kamal) complete.

Providing and supply DTH connection complete in all respect of reputed make.

ELECTRICAL WIRING :- Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group "C" (i) Light Point(Item No.101)

Fan Point(item no 107)

Exhaust Fan,point(items no.108)

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.Item no. 116

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required (i) 4 modules (140mmx78mmx50mm) item No. 302 to 304

(ii) 6 modules (205mmx78mmx50mm)

(iii) 8 modules (120mmx135mmx60mm)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required (i) 2 x 1.50 Sq. mm.

(ii) 2 x 2.50 Sq. mm.

(iii) 2 x 4.00 Sq. mm.

Wiring for circuit / sub-main with 2x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable for earthing as required (Item No.104)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.(i) S.P. 5/ 6 Amps one way Modular switch.

(i) 5 pin 5/6 Amp. Modular socket outlet

(ii) Bell push, Modular.item no. 418,421

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. S.P. 15/ 16 Amps one way Modular switch complete in all respect.(i) 6 pin,15/16 Amps Modular socket outlet.item No.421,422

(ii) 6 pin, 15/16 modular socket outlet (item No. 421, 422)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. TV. Socket outlet, modular.item No. 425

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. Telephone socket outlet, Modular.item no. 424

Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-Double door-12 way item No. 818

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. Cat-A.item No. 652

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450 mm & cross-sectional area (25.4 mm x 4.75 mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530 mm x 450 mm x 150 mm) nominal with all accessories including connections, earthing the body etc. as required. items No.654

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required.100 Amp. Category-A

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.Single pole & neutral. Cat-B.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.item no. 1905

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.item no. 1906

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required (i) 25 Liter capacity water heater (Cat-A) items No. 901

(ii) 10 Liter capacity water heater (Cat-A) items No.905

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required. (i) Ceiling Fan 1400 mm sweep, Category-A item No.912

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.Exhaust Fan, Light duty, (Domestic) 225 mm sweep item no.913

Providing and fixing of Syska, Havells/Philips/ Wipro make LED Tube Fixture 18 watt complete in all respect in all leads and lifts.item no. 920

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- item s no.430

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required. Item No. 151

Supplying and fixing bakelite batten/angle holder including connections etc. as required. Item No. 933

Supplying and fixing of integral CFL Post Top Lantern of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. (i) Gate post top lantern - CFL 26 watt.item no,2817

Spplying and fixing of split type all weather air conditioner Blue Star / LG / Onida Whirlpool / Lioyd / Samsung make having two stars features auto clean filter four way swing all copper pipes including making provision of draining of back moisture water tharough GI pipe 20 mm dia electronic voltage stabilizer, cutting holes for conduits in wall, unit bracket set fixed on outer wall complete as required. 1.50 Tonne capacity.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete (i) 75mm dia

(ii) 110 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved etc. complete.(i) 75mm dia

(ii) 110 mm dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved etc. complete (i) 75mm dia

(ii) 110 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved etc. complete (i) 75mm dia

(ii) 110 mm dia

Providing and fixing PVC singal equal branch plain ISI marked including fixing with approved etc. complete.(I) 110mm dia

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved etc. complete.(i) 110mm dia

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved, cost of cutting and making good the wall and floors etc. complete.(i) Kitchen 110mmx90 mm

Providing and fixing vitreous China wash, down water closet (EuropeanType WC pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 3 sand) ( seat and cover to be measured and paid for seperately) : Anglo Indian

Providing and fixing white solid type plastic sheet and cover for wash down water closet with CP brass hinges and rubber buffers.

Providing and fixing 10.00 liters Concealed cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15 mm nominal size brass ball valve with polythene float, C.P. Brass handle, Unions and couplings for connections with inlet, outlet and couplings for connections with inlet, outlet and over flow pipes, 40 mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) in all leads and lifts. (HPSR-2020 CODE NO-17.64)

Providing & fixing viterious china wash basin with single hole for pillar tap with C.I. or M.S. bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (cornet) white Flat back 630 mm x 450 mm.

Providing and fixing viterious china padestral for wash basin complete recessed at the basic for reception of pipe and fittings Cera sanitary work (carnet) white (Viterious China in White Colour)

Providing and fixing G.I. Union for wash basin or sink 32 mm dia.

Providing and fixing C.P. brass waste and plug for glazed ware sinks, basins etc. with long screwed shank and fly nut and fixed to steel pipe including vulcanite plug, brass chain and stud 32 mm nominal bore.(HPSR-2020 CODE NO 13.107.1)

Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass marked on 6mm thick AC sheet or plywood sheet and fixed to wooden plug with CP brass screws and washer.

Providing and fixing CP Brass towel rail complete with CP Brass brackets fixed to wooden plug with CP Brass screws 600 mm x 20 mm.

Providing and fixing 600 mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws.(HPDR-2020 CODE NO 3228)

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing Tooth brush and Tumbler holder (Viterious China)

Providing and fixing C.P. Brass Shower Rose with 15 mm to 20 mm inlet 100 mm dia.

Providing and fixing brass bib tap (Superior or heavy type) 15 mm dia long nose.

Providing and fixing brass bib tap (Superior or heavy type) 15 mm dia short body.

Providing and fixing C.P. brass angle valve 15 mm without Nuts and pipe.

Providing and fixing Brass Divertor 15 mm of superior quality in all leads and lifts.

Providing and fixing Kitchen Sink mixer of superior quality complete in all respect in all leads and lifts.

Providing and fixing wash basin mixer of superior quality complete in all respect in all leads and lifts.

Providing and fixing P.V.C. connection with brass unions 300 / 450 mm length 15 mm nominal bore.

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or Nahni trap.

Providing and fixing PTMT Jet spray of approved quality and colour with one meter tube.

Providing and fixing of C.P. Towel ring of superior quality.

Providing and fixing of C.P. towel rack 600 mm x 250 mm of superior quality.

Providing and fixing stainless steel kitchen sink (Double Bowl) of approved standard ISI make with drain board and C.P. waste with C.I. or M. S. brackets painted white including cutting holes and making good the same but excluding fitting 610 x 460 mm with bowl depth 200 mm.

Providing and fixing to wall ceiling and floor galvenised mild steel tubes (light grade) tube fittings and clamps including making good the wall, ceiling and floor in all leads and lifts.(i) 25mm nominal bore

Providing and fixing brass full way valve with wheel of 25 mm dia (Heavy Duty) complete in all respect in all leads and lifts.

Providing and fixing to wall ceiling and floor CPCV Composite PR Pipes (as per IS 15450:2004) (The pipes are having inner layer in natural colour & outer layer in black colour) and clamps including making good the wall, ceiling and floor complete in all respect in all leads and lifts.(i) 15mm nominal bore

(ii) 20 mm nominal bore

Providing and fixing CPCV Coupler composite crimp fittings-internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts (i) 15mm dia

(ii) 20 mm dia

Providing and fixing CPCV Elbow composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.(i) 15mm dia

(ii) 20 mm dia

Providing and fixing CPCV Equal Tee composite crimp fiitings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts (i) 15mm dia

(ii) 20 mm dia

Providing and fixing CPCV Reducing Tee composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts(i) 20x15mm dia

Providing and fixing CPCV Reducer composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts (i) 20x15mm dia

Providing and fixing CPCV female threaded connector composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts. (i) 15mm dia

(ii) 20 mm dia

Providing and fixing CPCV Male threaded connector composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.(i) 15mm dia

(ii) 20 mm dia

Providing and fixing CPCV Female Elbow composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts (i) 15mm dia

(ii) 20 mm dia

Providing and fixing CPCV pipe Holding Clamps with brass plate of approved design with steel screws and rawal plugs etc. complete.

Providing and fixing of PVC water storage tank having of capacity 1000 liters with necessary fittings including over flow pipes, scour pipes etc. inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects.

RAKESH GOEL