Providing bore well motor pumpset and pipe line at Govinidawada village of Bommanahal mandal

Towards Geologist survey charges

Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Towards the 180 mm dia 6 kg/cm2 PVC Casing Pipe

Supply and erecting, ISI mark submersible 7.50 HP,3 Phase, 10 stages pumpset suitable for 156 mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength.

Cost and supply of 50 mm dia G.I pipes 'B' class with heavy guage couplings

Cost and supply of 4.00 sq.mm 3 core cable wire

Cost and supply of 50 mm dia G.I nipple (1.50 mt)

Cost and supply of 50 mm dia G.I bend

Cost and supply of 50 mm dia G.I nipple (0.60 mt)

Cost and supply of 7.50 HP suitale pannel board

Cost and supply of 50 mm dia MS clampset

Cost and supply of 180 mm dia MS Bore Cover

Resilient Seated Soft Sealing" 80 mm dia DI Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, without bypass upto 400mm dia and with bypass above 400mm dia

Tamper Proof 40 mm dia DI Flanged Single Chamber Air Release Valve with Body and cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005 and subsequent revisions

Supply and fixing of Banuched cable wire including cost and conveyance of all materials and Labour charges.etc.

cost of 50 mm dia C.I. NRV

Earthwork excavation for pipeline trench of size 0 .70x 1.00 mts depth including in all soils laying and jointing of 90 mm dia 6 kg/cm2 pvc pipes true to alignment and gradient and refilling the trench etc complete

Cost of pipe 90 mm dia PVC 6 Kg/cm2 Pipe