Construction of additional lane for approach road at Kadapa Airport Sh SITC of street light poles

Amount

SITC of following MS tubular (410, SP-31) of total length 9m fabricated with following dia pipes 165.1 x 4.85mm (Bottom), 139.7 x 4.5mm (middle), 114.3 x 3.65mm(top) with a bottom plate of size 300x300x6mm having necessary gasket plate etc. with M.S single bracket and arms with over hang of 1.0m, erecting the same in cement concrete foundation with a concrete mixture of 1:3:6 circular shape of size 60cm dia and 60 cm above ground level and 1500 mm below ground level with bed size of 0.7x 0.7 x 1.5 m as per specification including excavation, wiring with 3Cx 2.5 sq.mm copper wire from the control box to street light fixture, with sintex / FRP control box with four number 20A Aluminium busbar along with supports of suitable size, 1 nos 6A MCB, neutral link and connection to the lamp through the pole, connection to the sintex / FRP control box through the concrete foundation with suitable size G.I. Pipes and painting with two coats of primer and two coats of enamel paint as required.

SITC of following MS tubular (410, SP-31) of total length 9m fabricated with following dia pipes 165.1 x 4.85mm (Bottom), 139.7 x 4.5mm (middle), 114.3 x 3.65mm(top) with a bottom plate of size 300x300x6mm having necessary gusset plate etc. with M.S Double bracket and arms with over hang of 1.0m, erecting the same in cement concrete foundation with a concrete mixture of 1:3:6 circular shape of size 60cm dia and 60 cm above ground level and 1500 mm below ground level with bed size of 0.7x 0.7 x 1.5 m as per specification including excavation, wiring with 3Cx 2.5 sq.mm copper wire from the control box to two street light fixture, with sintex / FRP control box with four number 20A Aluminium busbar along with supports of suitable size, 2 nos 6A MCB, neutral link and connection to the two lamp through the pole, connection to the sintex / FRP control box through the concrete foundation with suitable size G.I. Pipes and painting with two coats of primer and two coats of enamel paint as required.

SITC of M.S Double Arm bracket with over hang of 1.0m, suitable for pole under sl no:1.1 above meeting relevant IS specifications.

Supply and fixing street light luminaire of 70 W LED with heat resistant toughened glass cover, die cast aluminium housing etc of approved make.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. Mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size in the existing masonry open duct as required. Upto 35 sq. Mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size in the existing masonry open duct as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. Mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and aluminiumlugs for following size of PVC insulated and PVC conductor cable of 1.1 KV grade as required. 3½ X 50 sq. mm (35mm)'

Supplying and making end termination with brass compression gland and aluminiumlugs for following size of PVC insulated and PVC conductor cable of 1.1 KV grade as required. 4 X 6 sq. mm (28mm)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required 6A,SP

Supplying fixing following rating 4P, 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required 125A

Supply of following XLPE insualted, PVC sheathed, Aluminium conductor, armoured 1.1 KV garde MV power cable generallay confirming to IS 7098 (part-1)with up to date amendments. 4C X 6 Sq.mm

Supplying and laying of following size HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II completewith fitting and cutting, jointing etc. in the existing trench, complete as required. 40 MM

Supplying and laying of following size HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II completewith fitting and cutting, jointing etc. in the existing trench, complete as required. 50 MM

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Ruchira Associates

VSR CONSTRUCTIONS

NARMADA ENGINEERING WORKS

INDUSTRIAL ELECTRICALS AND CONTROLS

POWER ELECTRICAL WORKS

DElite System Engineering (India) Pvt. Ltd.