Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹36.1 L+₹69,994.85 (1.98%)Rejected-Finance YOL CAMP TEH DHARAMSHALA DISTT KANGRA HP | YOL | KANGRA | HIMACHAL PRADESH | 176052 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹38.9 L+₹3.5 L (9.99%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹40.5 L+₹5.2 L (14.6%)Rejected-Finance SHIVAJI NIWAS VILL CHIMBALHAR P O GEETA PEETH PALAMPUR HP 176061 | KANGRA | HIMACHAL PRADESH | 176061 | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹41.5 L+₹6.1 L (17.2%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹40.6 L
EMD Value
₹81,300
Closing Date
28 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (KH) YOL
GE (KH) YOL, YOL CANTT, HP
Provn of APP membrane in Bldg No. P-01 (25/2 Camp), P-04 and P-06 (25/3 Camp), P-10 (25/4 Camp) and Provn of cover shelter at YOL CANTT under AGE B/R-I of GE (KH) YOL
2023_MES_611384_1
GE/Y-47/2023-24
Open Tender
Civil Works
Item Rate
180 days
YOL CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (KH) YOL
₹81,300
Yes
30 Oct 2023
31 Jul 2023
4 Sept 2023
31 Jul 2023
28 Aug 2023
14 Aug 2023
Amount
Part-I: Taking down existing unserviceable roof treatment/cement plaster/treatment on slab/walls/facia and PCC/ cement mortar padding etc complete from roof carefully by cutting chiselling, cleaning the surface with wire brushes roughening the surface and hacking out, dirt where directed and disposal of rubbish etc. n.exc 1.50km distance from the starting point, complete all as specified and directed as Engr-In-Charge.
Plain cement concrete M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate, 50mm thick as in repair to padding on roof slab finishing even and smooth without using extra cement to ascertain the proper slope, complete all as specified and directed.
Rendering cement plaster 10mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) on fair faces of brick wall or on concrete (external) surfaces, surface finished even and smooth without using extra cement, mixed with WPC 3% weight of cement, all as specified. Note : Supply only Water proofing compound shall be measured and paid for seperately.
Supply and providing water proofing treatment with hyperplas fibre 3kg/sqm APP polymeric membrane of minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) and applying evenly a tack coat of industrial bitumen 85/25 or 90/15 grade at the rate of 1.2 kg/sqm over including coating the surface with water based bituminous primer @ 0.70 Sqm/Litre, complete all as specified and directed as Engr-In-Charge. Note:- The water proofing tratment shall be done as per manufacture's instructions by authorised applicator only.
M&L for provn of finishing coat of solar reflective bituminous aluminium paint 0.10 kg/sqm, complete all as specified and directed.
Rendering cement plaster 5mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc, complete all as specified and directed.
Preparation of newly plastered wall surfaces and appling two coats of cement base paint over a coat of primer, complete, all as specified.
Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc, including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and as directed.
Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) on other than fair faces of brick/stone wall or concrete surfaces, surface finished even and smooth without using extra cement with WPC @ 3% by weight of cement, all as specified. Note:- water proofing compound shall be measured and paid separately
Preparation of newly plastered surfaces of walls and applying Acrylic smooth exterior paint of required shade two coat @ 1.67 Ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 sqm, complete all as specified and directed as Engr-In-Charge.
Complete removal of exiting treatment of old decorated plastered or unplastered surfaces including cleaning by brooming down or with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and cleaning oil and greasy spots and cleaning with water on walls and preparation of plastered surfaces and applying Acrylic smooth exterior paint of required shade two coat @ 1.67 Ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 sqm over 2mm thick wall care putty, complete all as specified and directed as Engr-In-Charge.
Supply only intergal water proofing compound, complete all as specified.
Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, all as specified.
Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor/ sunken floor spout complete, all as specified and directed.
All as per Serial Item No 14 above but except pipe. (Note:- Serviceable pipe retrieved from Serial Item No 13 shall be used).
Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, all as specified.
Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.
All as per Serial Item No 17 above but except pipe. (Note:- Serviceable pipe retrieved from Serial Item No 16 shall be used).
Mild steel galvanized iron water tubing 25mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, including taking up or down old pipe, all as specified and directed.
Disconnecting existing tanks of capacity exc 250 litres but not exc 500 liters, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Cleaning and removing all scale and dirt, etc, from tanks, all as specified.
Disconnecting existing tanks of capacity exc 500 litres but not exc 1000 liters, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Cleaning and removing all scale and dirt, etc, from tanks, all as specified.
Dismantling water tanks and removing to store tanks of capacity exc 250 litres but not exc 500 liters.
Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with polythene float and fly nut and washers, complete and making connections with existing water supply line, complete all as specified.
Dismantling water tanks and removing to store tanks of capacity exc 500 litres but not exc 1000 liters.
Rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with polythene float and fly nut, washers, complete and making connections with existing water supply line, complete all as specified.
20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair, all as specified.
20mm dia Nipple suitable for HDPE water tank (Minimum weight 15mm-38gms/20mm-45gms /25mm- 65gms), and fixed in repair, complete all as specified and directed.
Gun metal, globe or gate valves, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed in repair, complete, all as specified.
Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, all as specified.
Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, all as specified.
Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and directed.
Demolition of stones or brick masonry, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc. including removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and as directed.
Brick work with fly ash bricks, old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified.
All as per Serial Item No 33 above but except bricks, old serviceable bricks received from item No. 32 shall be reused, all as specified.
Reinforced cement concrete, M-15 (Nominal mix), type B-1, (with 20mm graded crushed stone aggregate as) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, all as specified.
TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.
Rough excavation not exc 1.5 metres deep and getting out in any type of soil, all as specified.
Excavation in trenches n exc 1.5 metre wide & n exc 1.5 metre in depth for foundation etc or for shafts, wells, cesspits manholes, pier holes etc n. exc 10 Sqm on plan n exc 1.5 metre in depth and getting out in any type of soil, complete all as specified.
Excavating in post holes (or similar holes) each n exc 0.5 cu. M, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, all as specified.
Plain cement concrete M-7.5, nominal mix, D-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified.
Plain cement concrete M-10, nominal mix, C-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified.
Supply only approved earth obtained from outside MD land and depositing at site as directed by Engr-In-Charge.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base. Note: earth received from item No 42 above shall be used.
Hard core of broken stone or boulders of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, all as specified.
75mm thick Plain cement concrete M-7.5, nominal mix, D-2, using 40mm graded mechanically crushed stone aggregate as in sub base complete all as specified.
Plain cement concrete M-15, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in floor, 40mm thick, finished even and smooth without using extra cement all as specified.
M&L for Glass dividing strips width of strip 38mm, 3mm thick and inserted in position, conform to design, complete all as specified and directed.
Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) on fair faces of brick wall or concrete surfaces, surface finished even and smooth without using extra cement complete, all as specified.
Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.410 Gde-E-250, steel work, all as specified.
Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. conforming to grade Fe.410-0.Gde-E-250, steel work, all as specified.
Mild Steel framed work as Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete, conforming to Fe 410 Gde E-250, all as specified.
Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.
Welded steel wire fabric not exceeding 4Kg/Sqm, complete to steel members.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and directed.
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and directed.
M&L for 50mm thick sand cushioning under floors for laying interlocking pavers including consolidation, complete all as specified and as directed.
Machine pressed precast concrete interlocking paver block, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and top layer with grey cement and no pigment floor, pavement etc. laid over dry sand and compacted with mechanical vibrator complete all as specified and directed.
M/S AMOLAK SINGH AND SONS
surinder kumar jindal & bros.
MM Constructions
M/S JATINDERA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .