Urgent replacement of old damaged cable and damaged pole and repairing of feeder panel at FSD Bhatjungla

Amount

Part A

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supply of following type of XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 as required. CABLE SIZE 4 X 35 SQ.MM

Supply of following type of XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 as required. CABLE SIZE 2 X 10 SQ.MM

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. 63 mm dia(OD 63 mm &ID 51mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying and fixing of one No. PVC insulated & PVC sheathed/XLPE al conductor cable of 1.1KV grade of following size on the wall surface as reqd. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one no PVC insulated and PVC sheated power cable with the help of 7/18 GI stay wire & both side turn buckle with suitable size clamp fixing of pole/Godown wall/truss etc. as required for cable size of upto following size upto 35 sq mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 2x10 sq mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 4x16 sq mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 4x25 sq mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 4X35 sq mm

Providing and fixing 100 Amp rating, 30 KA breaking capacity and Four Pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100A, 30 KA, FPMCCB

Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral

Supplying and fixing 40 A rating, 240/415 volts, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral

Dismantling of rusted & damaged busbars of Feeder Pillar box with disconnection of cables & internal connection of MCCB & MCBs,disconnection of incoming and out going cables, supplyying and fixing of new aluminum busbars of same size of old busbars, socketting of cable leads and connection with MCCB & MCBs, dressing of cables & inter-connecting cable leads/ wires, scrapping, cleaning the rusted surface of the Feeder Pillar box, paintning the inner and outer surface of Feeder Pillar box with synthetic enamelled paint to give a even shade and elegant look etc as per instruction of Engineer-in-charge.

Supplying of swagged type steel tubular pole of 9 mtr conforming to IS 2713/80 of designation 410 SP-25 having ultimate tensile strength of 410 MPA (42 kgf/mm²).

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 8.0 meter and upto 10.0 meter

Providing and fixing 4 way connector in terminal MS box along with interconnection and earth connection as required.

Part B

Less credit for dismantled old damaged pole

Disney Enterprise (BID ID -3123805)