Construction and Commissioning of Fecal Sludge Treatment Plant of 12 m3/day capacity at Chirkunda town Jharkhand followed by Operation and Maintenance for 6 years including DLP of 3 months.

Amount

Earth work in excavation in open area, STP, WTP, Pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of Engineer. (Measurements for payment to be done as per standard drawings).

Refilling-Filling in foundation trenches & plinth in layers not exceeding 150mm thick, well watered, rammed, fully compacted & fine dressed with earth obtained from excavation of foundation within a lead of 50m & lift of 1.50m all complete as per buiding specification and direction of E/I

Stone Soling - Random rubble dry stone Kharanja (soling) under floor.

Providing PCC in nominal mix of 1:2:4 in foundation with approved quality of stone chips with 20mm to 6mm size graded and clean coarse sand of FM of 2.5 to 3 including screening , shuttering, mixing cement concrete & placing in position , striking, vibrating, curing, taxes & royalty all complete as per building specification & direction of Engineer in charge

Providing PCC in nominal mix of 1:3:6 in foundation with approved quality of stone chips with 20mm to 6mm size graded and clean coarse sand of FM of 2.5 to 3 including screening , shuttering, mixing cement concrete & placing in position , striking, vibrating, curing, taxes & royalty all complete as per building specification & direction of Engineer in charge

RCC - Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in M-30 is @ 340 kg/cum)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in M-25 is @ 330 kg/cum)

Reinforcement - Supplying, fitting & placing HYSD bar reinforcement in sub structure complete as per drawing and technical specification

Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Columns, Pillars, Piers, Abutments, Posts and Struts

Suspended floors, roofs, landings, balconies and access

Walls (any thickness) including attached pilasters, butteresses,

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

providing designation 75A brick work in CM ( 1:3) in foundation & plinth with approved quality of clean coarse sand of FM 2 to 2.5 including providing 10mm thick mortar joints , cost of screening materials, rating out joints to 15mm depth , curing taxes & royalty all complete as per building specification and direction of E/I

Providing random rubble stone masonry in CM (1:4)in foundation & plinth with hammer dressed stone of less than 0.03cum in volume and clean coarse sand of FM 2 to 2.5 including cost of screening , raking out joints to 20mm depth , curing , taxes & royalty all complete as per building specification and direction of E/I

Plastering with mortar, 1:4 - Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of FM 1.5 including screening, curing, with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I

D.I manhole cover with frame 300X300mm size(33kgs)

D.I manhole cover with frame 450X600mm size(30kgs)

D.I manhole cover with frame 600X600mm size(65kgs)

White washing three coats over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing , scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat ofapproved steel primer.Using flats 30x6mm for diagonal braces and central cross piece.

Providing and fixing double leaf Window wooden shutters made of Ist grade wood as per traditional design (Deshi pattern) planks thickness 25mm and width of Binies, Andheri 35mm and 25mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching/ as per approved design with moulding/ carving complete in all respect : Sheesham wood grade Ist. MP teak wood grade 1st

Providing, fabricating and erecting MS ladder of 450mm wide made of 65 x 65 x 6mm angle iron and 20mm MS bars for walkway to top of the room including cutting, hoistng, fixing in position and applying a priming coat of approved steel primer complete in all respect as per specifications and the direction of the Engineer.

KSRB 14.7-1 : Providing and laying flooring with M15 cement concrete, 40mm thick using broken granite 20 mm and down size laid to line and level in one layer and finish with a floating coat of neat cement, including cost of materials, labour, curing, complete as per specifications. Specification No. KBS 14.3

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Pavement Subgrade - Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401,for grading (iii material)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechnical plant carriage of mixed material by tipper to site , for all leads & lifts, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density with smooth 3 wheeled steel roller

Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site , laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction for grading I (40mm nominal size)

Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed stone aggregates of specified grading premixed with bituminous binder@ 5.4 to 5.6% of mix and filler, transporting the hot mix to site , laying with a hydrostatic paver finsher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory & tandom rollers to achieve the desired compaction as per MORTH specification clause No 509 complete in all respects. for grading -I (13mm nominal size)

Filter Media - Providing and laying of coarse aggregate size as below after washing & sieving to make it free from fines & dust Aggregates 70 mm to 50 mm

Aggregates 12 mm to 16 mm

Aggregates 5 mm to 7 mm

Aggregates 90 mm to 120 mm

Aggregates 20 mm to 16 mm

Aggregates 10 mm to 12 mm

Coarse Sand

Providing at site, lowering & laying in trenches, aligning & jointing of PVC-U pipes (SN 8) as per IS 15328 (amended up to date) and as per specifications with rubber rings with socket and spigot joint, (EPDM/SBR) for all depths for pipe length as per drawing and specification including hydraulic field testing (including the cost and conveyance of water to site for testing) and commissioning etc complete as directed by Engineer. Note : E/w to be measured and paid separately 110mm dia UPVC pipe

4 inch elbow

110mm dia Tee pipe

160mm dia pipe

End cap to sampling pipe

Elbow

Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of required diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 6 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Engineer in charge is necessary before use.) 6 inch dia pipe

Conduct Hydrogeological investigation to determine the most probably spot for bore hole to obtain water. The scientific investication is to be carried in the pressence and in the directions of the engineer and using specialised resistivity measuring instruments.

Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes,excluding the cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water and as per direction of the engineer. The tube well should have a throughout bore as per nominal dia of casing pipe:150 mm dia nominal bore

Supply of ERW M.S black casing pipe ISI marked (IS: 4270/1992) of grade Fe410 of following nominal bore sizes at site of work - 150 mm diameter

Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS: 8110 -1985 of following nominal bore sizes at site of work. Nominal bore dia: 150 mm

Testing verticality of tube well by plumbing system and yeild test and draw down test by pumping system as per IS: 2800 ( part II) 1979

Supply and fixing of tube well cover of M.S sheet( 6 mm thick) with nuts and bolts complete for casing size of 150 mm dia

Supply and fixing of MS clamp set of 50 x 6 mm flat iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set

Providing and lowering of GI flange pipe B class including rubber washer and nuts of 8 mm dis complete in all respect - 50 mm

Providing and fixing of Sintex Tank ( 3 layers) 2000 liters capacity next to the bore well under the ground as a sump tank. includes cost and conveyance of all materials like valve and brackets etc. complete as directed by the Engineer In charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32mm dia CPVC pipes

Providing and fixing of 15mm dia brass bib Cock water tap

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete

Providing and fixing M.S. Gate as per chief architect drawing, using 50x50mm 14 guage MS hollow pipe frame work bent to ornamental shape as shown in drawing and 35mmx6mm and 16mmx16mm square rods for verticlas alternatively spaced at 4cm c/c in two halves and 40mmx6mm MS flats for horizontal members and at the top cast iron spikes are provided at alternate vartical members as shown in the drawing etc. complete. All the steel surface should be thoroughly cleaned free of rust and painted with anti corrosive paint( Shop paint) etc. complete. the work includes the cost of all materials, labor charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, with lead and lift, loading and loading charges etc.complete as per specification

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and laying Cinders as a Filter Material In AF as per the instruction given by the site engineer in charge.

Providing and planting common reeds or other rhizome with nine plant per square metre

Providing and fixing mild steel grill work for screening of wastewater as per drawing including fixtures, necessary welding and painting with one coat of zinc chromite primer and two coats of epoxy painting complete.(As per instruction of site engineer) Weld grill with vertical sloping 10 mm thick bar placed at a distance of 2.5 cms and dimensions of 690 mm x 500 mm

Weld grill with vertical sloping 10 mm thick bar placed at a distance of 2.5 cms and dimensions of 690 mm x 500 mm

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Ceiling fan 120mm

P & F 1.6 mm thick M.S. Recessed fan box, hexagonal/ round of size 100 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side .

4*40 watt patty type single tubelight fitting

36/40 Watt tube light.

Recess mounting LED round down light 12 W

G.I. Earth pipe electrode with salt/charcoal: earthing with GI earth pipe 4.5 mtr long,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required.

Point wiring in PVC conduit, with piano type switch:- Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch, phenolic laminated sheet,suitable size PVC/GI box etc. Group C.

S.P 5/6 amps, one way modular switch , ISI marked.

S/F Piano type switch socket:- Supplying and fixing of following piano type switch /socket on the existing switch box cover including connections etc as required Electronic step fan regulator,deluxe

P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required. Size: 150 x 75 x 60 mm

S/F 'C' series, MCB:- Supplying and fixing following, 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. 40 amps,SPN

Supply of 7.5KVA Silent DG.set with comprising of Mahindra make Engine Model 1125GR, 12BHP @ NTP 1500RPM coupled to 7.5KVA Mahindra approved make 3-Phase, 415V, 50Hz alternator mounted on a common Base frame along with other accessories i.e., Fuel tank, Manual Control Panel, Battery with leads and acoustic enclosure.

Submersible pump @3cum/hr, 5 m head, 1.1 HP single phase

Provide sand and carbon along with neccesary accessories such as pumps, multiport values and piping. To include all installtions, testing and commissioning of the set up. Description of the item as mentioned in bid document

Installation of submersible motor pump set in tube well complete (labour charges only) including transportation of tripod, pulley block, and any other material required for lowering purpose

Operation and Maintenance for Fecal Sludge Treatment Plants, Trucks Operations, Project Office etc all complete. First(1st) Year

Second(2nd) Year

Third(3rd) Year

Fourth(4th) Year

Fifth(5th) Year

Sixth(6th) Year

seamak hi tech products