Strengthening of New Medical Store Building at New Civil Hospital Campus, Surat.

Name Of Work: Strengthning of New Medical Store Building at New Civil Hospital Campus, Surat.

Memorandum showing items of works to be carried out

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

1 20005 282.00 materilas and disposal of unserviceable materials with all lead and lift. 50.11 Rupees Fifty and Paisa Ten Only Sqmt

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and

Rupees Seventy Eight and Paisa

2 20015 194.00 clamps including stacking the materials with all lead and lift ( for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type,

Rupees Four Hundred Twenty

3 20016 14.00 flushing tank etc. including stacking the materials with all lead and lift.

Five and Paisa Ninety Two Only

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking Rupees One Hundred Ninety

them within all lead and lift.(ii) not Exceeding 3 Sq.M. in area. Seven and Paisa Nine Only

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

Rupees One Hundred Ninety

5 17002A 686.00 single or half brick walls for interior plastering upto floor two level and finished

Eight and Paisa Seventy Six Only

even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 20mm thick cement plaster in single coat on single or half brick walls for

Rupees Two Hundred Fifty Three

6 17003A 560.50 interior plastering upto floor two level and finished even and smooth in (i) Cement

and Paisa Eighty Eight Only

mortar 1:3 (1-cement:3-sand)

Rehabilitation of RCC members like Slab, beam, column etc. of a building and

upto any height at all level externally/internally by providing double

scaffolding by chipping off existing loose , damaged,cracked concrete

etc.from RCC members i.e. columns,beams,slabs etc upto 6mm beyond

reinforcement, carefully by chiesel and hammer including cleaning the surface of

Rupees One Thousand Nine

ARC the cement concrete and rusted reinforcement by mechanical wire brush or by

7 53.50 1959.94 Hundred Fifty Nine and Paisa Sqmt

Item No. 1 any other established method and finally remove the loose materials,rust and Ninety Three Only

dirt with air blowing or by water jetting etc.and disposal of dismantled

rubbish to the dumping ground by mechanical transport where permitted by

Municipal Corporation/ Municipality / Nagarpalika or as directed by Engineer-in -

charge with all lead and lift.

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Providing and erecting temporary engineered steel tubular standard double

scaffolding system on the exterior/interior side of the building, maintaining it in a

serviceable condition for the required duration as approved and removing it

thereafter. The scaffolding system shall be stiffened with bracings, runners,

connection with the building etc with suitable working platforms at required

locations etc complete as per directions and approval of Engineer-in -charge

and shall be paid separately under relevant item with all essential safety

features for the workmen.

Providing and applying anti corrosive rust remover "Rusticide" of M/S Sunanda

speciality coating Pvt Ltd or equivalent of approved brand and manufacture after

cleaning the same with wire brushe and water jet or air blowing.Apply the

solution with cotton waste swab to reinforcement as per manufacturer's

Application of a coat of cement slurry made of Polyyalk Fixoprime of M/S Sunanda

Speciality Coating Private Ltd or Dr. Fixit or equivalent of approved brand

and manufacture as per manufactures specification in the weight proportion 1:1

( 1 Polyalk FP : 1 Cement ) or in the required proportion as per the manufactures

specifications all around the old reinforcement or new reinforcement treated as

above .( The second coat shall be applied after a period of six hours )

To ensure proper bonding between old and new concrete application of bonding

coat of slurry made of Polyalk EP of M/S Sunanda Speciallty Coating Private Ltd

or Dr. Fixit or of equivalent approved brand and manufacture in the weight

proportion of 1 :2 (1 cement : 2 Polyalk EP ) or as per manufactures

specification over the cleaned and dried old concrete surface .

Apply Polymer Modified Cement Mortar upto 25 mm thick to RCC members in two

or more coats, each coat of 10 mm or less thick with water cement ratio not more

than 0.40 in the proportion of 1:5:15 (1 part Polyalk EP of M/S Sunanda

Speciallity Coatings Private Ltd of equivalent approved brand and

manufacture : 5 parts of cement : 15 parts of coarse sand ) by weight including

curing etc. or BASF make "MasterEmaco S-348" or Parex Group Construction

Products Pvt.Ltd.make "Lanko 732" as required as per manufacturer's

specification etc.complete.

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Providing and fixing single layer water proof Gypsum board 12.5 mm thick

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3mm with intermediate

channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling

section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A Rupees Six Hundred Six and

of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand Paisa Ninety Four Only

sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat

on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as per directions of the Engineer-in-Charge.

Providing and laying cement concrete pavement (25mm to 50mm thick) with 1:2:4 Rupees Four Thousand Five

9 14016A 2.00 (1-cement : 2-coarse sand : 4-stone aggregate 20mm nominal size) including 4505.15 Hundred Five and Paisa Fourteen Cumt

finishing with floating coat of neat cement complete Only

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint. (A)In beams and Rupees Nine Thousand One

10 11002AA 81.00 joists, channels angles Tees, flats, with connecting plates or angle cleats as in 9108.48 Hundred Eight and Paisa Forty Qtl

main and cross beams. Hip and jack rafters, purlins conneted to common rafters Eight Only

Removing, Repairing and Refixing existing Alluminium window frame with glass of

all size shutter/frame, replacing all old fixtures with new locks, screws etc.

including repairing the shutter/frame with Rates includes all labour charges for Rupees Six Hundred Ninety Six

removing, repairing & refixing the window, all materials, transport cost, taxes and Paisa Ninety Only

etc.and as directed by engineer in charge etc complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

Rupees One Thousand Ninety

12 14022A 214.50 flooring by adhesive material including dismentaling of existing flooring and jointed 1092.37 Sqmt

Two and Paisa Thirty Six Only

with color cement slurry including finised with flush pointing & cleaning the surface

etc. complete for light shade

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and

14008BA Rupees Nine Hundred Sixty and

13 56.00 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand

Paisa Forty One Only

) finishing with flush pointing in white cement.

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

Rupees One Thousand Five

14036 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick

14 226.50 1513.28 Hundred Thirteen and Paisa Sqmt

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. Twenty Eight Only

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR

SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and

size of 19mm x 19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S.

frame shall have a coat of steel primers of approved make and manufacture, M.S.

frame shall be covered with 5 mm thick heat moulded PVC ‘C’ channel of size

x 50 mm forming stiles, and 5mm thick 75mm wide PVC sheets for top rail, lock

Rupees One Thousand One

rail and bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross

15 10043 13.50 1146.37 Hundred Forty Six and Paisa Sqmt

PVC sheet as gap insert for top rail and bottom rail, Panelling of 5 stiles and rails Thirty Seven Only

with 30mm wide x 5mm thick PVC sheet beading on eighter side, and joined

together with solvent cement adhesive,. An additional 5mm thick PVC strip of

20mm width is to be stculk on the interior side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per direction of Engineer in charge,

manufacture’s specification and drawing.

Providing and fixing standared extruded of alluminium section of size 63mm x

Rupees One Thousand One

38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for

16 11030 5.50 1175.56 Hundred Seventy Five and Paisa Sqmt

ventilation with 5 mm thick frosted glass as details etc complete for Ventilation Fifty Five Only

Removing dry or oil bound distemper by a washing and scraping and sand

Rupees Eleven and Paisa Eighty

17 18014 5708.00 papering the wall surface smooth including necessary repairs to scratches

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly Rupees Forty and Paisa Fifty

brushing the surface free from mortar dropping and other foreign matter and sand Nine Only

papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including Rupees Eighty Three and Paisa

throughly brushing the surface free from mortar droppings and other foreign Thirty Five Only

matter and sand papered smooth. For all floor

Painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated ceiling surface to give an even shade including Rupees Eighty Nine and Paisa

throughly brushing the surface free from mortar droppings and other foreign Four Only

matter and sand papered smooth. For all floor

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Providing and applying Exterior Acrylic Texture Coating over existing sand-faced /

Mala plaster, including surface cleaning, removal of loose material, filling of minor

cracks with approved polymer-modified filler, application of one coat of alkali-

resistant exterior acrylic primer, one coat of approved acrylic texture coating

(minimum 1.5 mm to 2 mm dry film thickness) in the approved pattern and shade,

and two coats of 100% acrylic weatherproof exterior paint of approved make. The

rate shall include all materials, labour, scaffolding, tools and plants, transportation, Rupees Three Hundred Ninety

surface preparation, wastage, curing, safety measures, and all incidental charges Three and Paisa Ninety Only

complete. The work shall be executed strictly as per the manufacturer's

specifications and to the satisfaction of the Engineer-in-Charge. The contractor

shall submit product data sheets for approval prior to execution and provide a 24-

month guarantee against peeling, blistering, flaking and abnormal fading due to

defective materials or workmanship.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be Rupees One Hundred Ninety Five

concealed as directed including necessary fittings etc. including testing of pipe and Paisa Sixty Six Only

and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on Z clamp (Paid Separately)p with the help of clamp at every two metre Rupees One Hundred Forty Eight

C/C or shall be concelled as directed including necessary fittings etc. including and Paisa Eleven Only

testing of pipe and joints and fixing the same with adhesive solvent, including cost

of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be Rupees Ninety One and Paisa

concelled as directed including necessary fittings etc. including testing of pipe and Eighty Three Only

joints and fixing the same with adhesive solvent, including cost of all materials.

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or Rupees Seventy Two and Paisa

shall be concelled as directed including necessary fittings etc. including testing of Sixty Four Only

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on Z clamp (Paid Separately) using of PVC clamp of Rupees Eight Hundred Thirty

the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm Four and Paisa Thirty Eight Only

center to center or shall be concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all materials.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure pipes I.S. class NP2 of the following internal diameter with collars and Rupees Six Hundred Seventy

butt ends prepared for collar joints including testing of joints complete.(D) 300mm Eight and Paisa Two Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special Rupees Three Hundred Thirty

falnge compression type fittings, wall clipsetc. including making good the wall Nine and Paisa Four Only

ceiling and floor.(G)110 mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

polythene pipes of the following outside Dia. Low densidy, complete with special Rupees Two Hundred Eighty and

falnge compression type fittings, wall clipsetc. including making good the wall Paisa Twenty Three Only

ceiling and floor.(F) 75mm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

with jali of the following nominal diameter of self cleansing design with C.I scread Rupees Five Hundred Ninety Nine

down or hinged grating including the cost of cutting and making good the walls. and Paisa Sixty Three Only

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Providing and fixing wash down water closet (European type W C pan) with

integral P and S trap including jointing the trap with soil pipe in cement mortar 1:1

(1 cement five sand) including providing and fixing plastic seat cover for wash

down WC with CP brass hinges and rubber buffers back plastic seat and including

providing and fixing PVC flushing tank with a pair of C I or MS bracket with

complete fitting such as lead valve siphon 15 mm dia brass ball valve with

Rupees Three Thousand Fifty

31 RA-6 6.00 polythene float CP brass handle unions and couplings for connection with inlet out 3055.25 No

Five and Paisa Twenty Five Only

let and over flow pipes 40 mm dia porcelain enameled flush bend including cutting

holes in walls and making good the same connection the flush bend with cistern

and closet vitreous china.including jet spray heavy duty SS 304 grade 60 cm long

{Hindustan, Cera, Parryware or equivalent }

32 23030A 14.00 Providing and fixing brass screw down stop tap.(A) 15mm dia.

Rupees Two Hundred Five and

Paisa Eighty Two Only

Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) Rupees One Hundred Eighty Nine

and Paisa Eighty Three Only

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S.

brackets painted white including sutting holes and making good the same

including Brass waste, and M I fisher union fittings including pvc connection and Rupees Two Thousand Eighty

waste pipe & all necessary fittings For All Floor (A) Vitreous China:(ii) Flat Back and Paisa Sixty Only

washbasin 550 mm x v 400mm size. (i) In white colour

Providing and fixing Gun metal check or non-return fullway wheel valve (A) 25mm Rupees Four Hundred Twenty

dia. and Paisa Sixty Three Only

Providing and fixing Gun metal check or non-return fullway wheel valve (A) 40mm Rupees Six Hundred Sixty Three

and Paisa Forty Two Only

Providing and fixing screw down bib taps of following size.(A) Brass screw down Rupees One Hundred Eighty Six

bib tap polished bright. (i) 15mm dia. and Paisa Eighty Two Only

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and

Rupees One Thousand Two

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

38 24006B 5.00 1246.92 Hundred Forty Six and Paisa No

weight (i) Square mouth traps (B) 150mm x 100mm size P or R type Ninety One Only

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35Kg. Cm2 in C.M.

1:5 precast RCC cover 455mm x 610mm intenal dimensions with frame (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate Rupees Three Thousand One

39 RA-11 5.00 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement 3172.41 Hundred Seventy Two and Paisa Nos

mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed Forty One Only

concrete etc. complete (i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35Kg. Cm2 in C.M.

1:5 precast RCC cover 500mm x 710mm intenal dimensions with frame (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate Rupees Three Thousand Eight

40 RA-12 7.00 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement 3883.45 Hundred Eighty Three and Paisa Nos

mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed Forty Five Only

concrete etc. complete (i) Inside dimensions 500mmx 700mm and 450mm deep

for single pipe line.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or

L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. Rupees Six Hundred Thirteen and

limpet washer. filled with white lead complete excluding the cost of purlins, Paisa Seven Only

Rafters and Trusses.(1) 0.80 mm thick sheet.

Demolition of terrace including stacking of serviceable materilas and disposal of

Rupees Sixty Six and Paisa

42 20004 607.00 unserviceable materials with all lead and lift.(i) Brick tile covering.

Eighty One Only

Painting two coats (excluding priming coat) on new wood and wood based surface

with ready mixed paint, brushing, oil, gloss, semi gloss to give and even shade Rupees One Hundred Nine and

including cleaning of all dust, dirt and other foreign matter sand papering and Paisa Eleven Only

Painting one coats (excluding priming coat) on

previously painted steel and other metal surface with

Rupees One Hundred Six and

44 19003+19004 89.48 enamel paint, brushing to give an even shade including 106.86 Sqmt

Paisa Eighty Five Only

cleaning the surface of all dirt, dust and other foreign

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Provoding and fixing flush door shutters, solid core

construction with frame of first class hardwood with

cross board and face veneer or plywood face panels, Rupees One Thousand Eight

45 10011 59.00 including anodised alluminium butt hinges with 1829.74 Hundred Twenty Nine and Paisa Sqmt

necessary screws. (B) Non-decorative type and block Seventy Three Only

board core anodised alluminium butt hinges in flush door

shutters (2) 35 mm thick.

Providing and fixing 35 mm thick shutters for Doors, windows and clearstory Rupees Three Thousand Seven

46 10005AA 108.00 windows including blackenamelled M.S. butt hinges with necessary screws. (A) 3773.84 Hundred Seventy Three and Sqmt

Indian teak wood. (i) Fully Panelled. Paisa Eighty Four Only

Providing ordinary cement concrete grade 1.1.2 for road using Trimix vaccum

dewatering system with mixing Conplast P-211 (water reduction concrete

admixture) @ 100 ML per bag of cement with mixing of Recon 3S fibers (reliance

product) at 125 gms per bag of cement with providing and fixing & removing of "C"

channel having 75 x 75 mm as per required level slope and thickness of concrete Rupees Six Thousand Five

47 RA 45.00 and leveling and finishing the concrete using surface vibrator, power floater and 6565.00 Hundred Sixty Five and Zero Cmt

trowel light brooming on as directed including making expansion joint of size 20 Paisa Only

x 200 mm & filling the expansion joint using Colpar 200 as per

manufactures specitions by cutting of joint using concrete cutter machine etc.

Providing TMT Bar FE 550D reinforcement for R.C.C. work including bending, Rupees Ninety Four and Paisa

binding and placing in position complete upto floor two level Ninety Nine Only

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 : Rupees Six Hundred Fifty Six and

2006 including 35 mm Sand layer for levelling and filling the joint with sand Paisa Fifty Only

in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance

and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation

. The Light weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of

NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side) consisting of main ‘T’ Rupees One Thousand Six

50 16006 250.00 1674.15 Hundred Seventy Four and Paisa Sqmt

runner suitably spaced at joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of

size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to centre to form agrid of 200X600mm

and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm

thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to

form grid of size 600X600mm resting on eriphery walls/partitions on a perimeter

wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick

(minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm

long dry wall screws @ 30mm interval and laying 15mm thick Densified edges

light weight calcium silicate ceiling tiles of approved texture (Fine

ARC 2025-26 Rates

Quantities Total Amount

Quantities Total Amount

Estimated But According

ITEM NO SOR Item of Works In Figures Unit

may Be More In Words to Estimated

Or Less Rs.Ps. Quantites Rs.Ps.

Rupees Fifty Eight Lacs Seventy Two Thousand Two Hundred Only

(A) Total tendered amount

(B) Rebate On about Tendered amount ( if any ) ( % in figure) _______________(% in words)_______

( C ) Net Tendered amount ( A- B)

( D ) Net Tendered amount ( in words): Rupees

1 All works shall be carried out as per Public Work Department Handbook and other specification of Division or as directed

2 All the columns in Schedules should be filled in ink and the total of the entries ink last column should be struck by the contractor under his signature

3 Rates quoted include clearance of site ( prior commencement of work and at its close ). In all respect and hold good for work under all condition, site, moisture, weather etc

4 Signature of Contractor with Seal

Deputy Executive Engineeer Executive Engineeer

Project Implementation Unit Zone 7 Project Implementation Unit zone