Supply, Installation, Testing & Commissioning (S.I.T.C.) of 7 Mtr Hot Dip galvanised Octagonal Streetlight Poles with LED Lumineries Outdoor Streetlight fitting, control panel and allied accessories (Considering 25 Mtr. Distance between two poles ) incl. 5 Years Free comprehensive Guarantee period with 5 Years Operation & Maintenance at Lodhika, GIDC Estate, District – Rajkot, Gujarat under AII Scheme- 2020.

NAME OF WORK: : Supply, Installation, Testing & Commissioning (S.I.T.C.) of 7 Mtr Hot Dip galvanised

Octagonal Streetlight Poles with LED Lumineries Outdoor Streetlight fitting, control

panel and allied accessories (Considering 25 Mtr. Distance between two poles ) incl.

Years Free comprehensive Guarantee period with 5 Years Operation & Maintenance at

Lodhika, GIDC Estate, District – Rajkot, Gujarat under AII Scheme-

Schedule showing (approximately) the materials to be supplied from the GIDC store for work contracted to be

executed and the rates at which they are to be charged for:

Particulars Rate at which the material will be charged to the Place of Delivery.

Nil Nil Nil Nil Nil

Signature of Bidder EXECUTIVE ENGINEER (M&E)

Supply, Installation, Testing & Commissioning (S.I.T.C.) of 7 Mtr Hot Dip galvanised Octagonal

Name Streetlight Poles with LED Lumineries Outdoor Streetlight fitting, control panel and allied

Of accessories (Considering 25 Mtr. Distance between two poles ) incl. 5 Years Free comprehensive

Work Guarantee period with 5 Years Operation & Maintenance at Lodhika, GIDC Estate, District –

Rajkot, Gujarat under AII Scheme-

Of Executive Engineer (M&E),GIDC, Rajkot

DESCRIPTION OF ITEM RATE/

Sr. No. QTY. UNIT AMOUNT

PART - A - (Material incl. 5 Years Free Comprehensive Guarantee ) – Under A.I.I. Scheme-2020

1.0 1808.00 Supplying and erecting approved make Octagonal Ea 11411.29

pole made from HR sheet steel. The pole should

be made as per IS. and shall be coated with hot

dip galvanizing of minimum avg. coating

thickness of 85 micron as per IS

2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of

terminal plate of min 12mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

on suitable foundation as per detils given by

manufacturer considering site requirment..(E)

Mtr. Long 70 mm Top X 135 mm bottom dia,

mm thickness with 225mmX225mmX16mm

base plate, 4-M20 Bolts and 600mm long J-Bolt

EN 8 grade HDG foundation bolts along with

template for the above poles with "GIDC" Logo

on Name Plate. Approx Pole weight 67 kg.

(Make- As per Approved Vendor List as

below.).Note :- J-type EN 8 grade HDG

Foundation Bolt should be manufactured by

manufacturer of the poles (to be supplied)

2.0 1808.00 Painting of 1.1 KV Electrical Insulated Paint on Job 1326.69

Pole for human/ Animal / Living beings safety

purpose. Applied from Foundation to 1.5 mtr

above bottom of the pole - 600 Gram with 2 coats

dft shall be around 55-60 micron and having SHP

Property, Require Hybrid Polymer Electrical

Insulation Coating ,Require Single Component

paint, Corrosion & weathering protection, sault

spray resistance with Necessary Type test

certificate shall be provided from ERDA/NABL

Approved lab (Make:- As per Approved Vendor

Signature of Bidder EXECUTIVE ENGINEER (M&E)

List as below./As per Pole Manufacturer / OEM

Recommendation and approved drawing.)

3.0 1808.00 Providing cement concrete for foundation or for Job 3223.19

concrete filling in M-200 duly plastered with

necessary curing for pole muffing or any other

purpose with Providing & Laying Cement

Concrete 1:3:6 (1-cement :3-Coarse sand :6-hard

broken stone aggegrate 40 mm nominal size) and

curing complete excluding cost of formwork in

(A) Foundation and Plinth with Providing TMT

bar FE 415 reinforcement for RCC work

including bending, binding and placing in

position complete upto Top level of Foundation

& Finishing wall with weather proof exterior

emulsion paint on wall surface (teo coats) to give

an required shape even shade after thoroughly

brushing the surface to remove all dirt, and

remains of loose powdered materials etc.

complete by Excavating hard Murrum or Metal

road by chiseling for preparing pit for poles or

earth plates or for laying pipes & clearing the site

by removing debris & making site good -For

mtr Pole Foundation sized :- 500 x 500 x

mm or as per OEM foundation drawing- (1 No.

Per St. Lght Pole). (Make:- As per Pole

Manufacturer / OEM Recommendation and

approved drawing.)

4.0 14464.00 Providing & Fixing of Solderless Crimping Type Ea 14.55

Aluminium Lugs (4 Nos. per termination)

conforming to IS suitable for 1 x 4.0 Core x

16/25 Sq. MM PVC Insulated Aluminium

Armoured cable evenly crimped with high

pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an

approved manner. - (4 Nos. Termination Per St.

Light Pole).(Make- As per Approved Vendor List

5.0 1814.00 Providing & erecting 240 V MCB double pole Ea 278.18

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity.(A) 6 to

32 Amp.- (1 No. Per St. Lght Pole). (Make- As

per Approved Vendor List as below.)

6.0 1808.00 Providing and erecting Funnel Pipe type earthing Job 600.86

having 150 cms.long and 2.5 cms. dia. galvanised

iron pipe with coupling and buch buried in

specially prepared earth pit complete with

necessary 8 SWG earth wire and required size

HOT deep Galvanised iron strip for earthing of

Street light pole using proper clamp with using

salt and charcoal / coke as required for pipe type

earthing. (1 Job Per St. Light Pole). (Make- As

per Approved Vendor List as below.)

Signature of Bidder EXECUTIVE ENGINEER (M&E)

7.1 1770.00 Providing & erecting Decorative Sword Type Ea 2593.13

Street Light pole Bracket comprising main G.I.

pipe of 4.2 cms/require outside dia. and shall be

coated with hot dip galvanizing as per IS

2629/2633/4759 complete with suitable B Class

MS sleeve tubing of approx. 45 cms length and

suitable for 76.5 mm /80 mm/ require size of

OCTAGONAL POLE top having sufficient

fastners for fixing the brackets and having

suitable rise as per site condition and having

spread of 1.5.mtr. length with 110 deg.with

vertical plane & suitable welded stays, reducer

and with check nuts complete painted with one

coat of Red oxide / PU base primer and two coats

of Aluminium / PU paint suitable for side entry

fitting brackets, duly hot dip galvanized as per

IS:2629/ IS:2633/ IS: 4759 standards

specifications with minimum coating thickness of

85 micron complete fitted with mentioned below

with their specifications as per site condition and

as per drawing / directed by Engineer In charge.

with following nos of arms. (A) Single Arm

Bracket 1.5Mtr. - Sword Type (1 No. Per St.

Light Pole)– As per drawing attached (Make-

same as per pole make mentioned in Approved

Vendor List as below.)

7.2 38.00 Providing & erecting Decorative Sword Type Ea 3674.00

Street Light pole Bracket comprising main G.I.

pipe of 4.2 cms/require outside dia. and shall be

coated with hot dip galvanizing as per IS

2629/2633/4759 complete with suitable B Class

MS sleeve tubing of approx. 45 cms length and

suitable for 76.5 mm /80 mm/ require size of

OCTAGONAL POLE top having sufficient

fastners for fixing the brackets and having

suitable rise as per site condition and having

spread of 1.5.mtr. length with 110 deg.with

vertical plane & suitable welded stays, reducer

and with check nuts complete painted with one

coat of Red oxide / PU base primer and two coats

of Aluminium / PU paint suitable for side entry

fitting brackets, duly hot dip galvanized as per

IS:2629/ IS:2633/ IS: 4759 standards

specifications with minimum coating thickness of

85 micron complete fitted with mentioned below

with their specifications as per site condition and

as per drawing / directed by Engineer In charge.

with following nos of arms. (A) Double Arm

Bracket 1.5Mtr. - Sword Type (1 No. Per St.

Light Pole)– As per drawing attached (Make-

same as per pole make mentioned in Approved

Vendor List as below.)

Signature of Bidder EXECUTIVE ENGINEER (M&E)

8.1 1846.00 Supplying and erecting 90 Watt LED Outdoor Ea 6146.45

Street light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single

MCPCB with Fixed Programmable

microprocessor based Dimmable Driver, LED

Chip Efficacy- 150 lm/w and more and corrosion

free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company

mark/name engraved or embossed 140 to

V,Power Factor more than 0.95, THD < 10 %,

CCT 3000K to 4000K (Warm White),

Uniformity ratio >0.45, Luminaire efficacy >

lumens/watt (min.) . LED driver efficiency >

%.CREE / OSRAM / PHILIPS Lumileds /

NICHIA / SEOUL/ LG/BridgeLux (U.S.A.)

make LED used for luminaire. ( Fittings required

LM-79 & LM-80 certificates) -(A) Street Light

with external Surge Protection - 10KV non

integral, Light must have 440VAC line supply

protection. It should withstand 48 hours for

440VAC line supply. The fitting should be

suitable for side entry having suitable socket bore

for clamping complete erected having IP-66

Protection Class.(1 No. St. Light Fitting per Arm

x 1 Single Arm = 1 No. LED Fitting). (Make- As

per Approved Vendor List as below.)

Signature of Bidder EXECUTIVE ENGINEER (M&E)

8.2 6.00 Supplying and erecting 250 Watt LED Outdoor Ea 10988.46

Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single

MCPCB with Fixed Programmable

microprocessor based Dimmable Driver, LED

Chip Efficacy- 150 lm/w and more and corrosion

free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company

mark/name engraved or embossed 140 to

V,Power Factor more than 0.95, THD < 10 %,

CCT 3000K to 4000K (Warm White),

Uniformity ratio >0.45, Luminaire efficacy >

lumens/watt (min.) . LED driver efficiency >

%. CREE / OSRAM / PHILIPS Lumileds /

NICHIA / SEOUL/ LG/BridgeLux (U.S.A.)

make LED used for luminaire. ( Fittings required

LM-79 & LM-80 certificates) -(A) Street Light

with external Surge Protection - 10KV non

integral, Light must have 440VAC line supply

protection. It should withstand 48 hours for

440VAC line supply. The fitting should be

suitable for side entry having suitable socket bore

for clamping complete erected having IP-66

Protection Class.(1 No. St. Light Fitting per Arm

x 1 Single Arm = 1 No. LED Fitting). (Make- As

per Approved Vendor List as below.)

9.0 16680.00 Supplying and erecting Flexible FR PVC Mtr 72.75

insulated multi strand multi core 1.1 kV grade ISI

Marked Copper wires of 2.5 Sq. MM.,3 core

round PVC sheathed in exising pipe/ in street

light pole erected with green colour for earth

continuity. - (7 Mtr. per St. Light Fitting x 1 No.

St. Light Fitting =7 Mtr Pole.) (Make- As per

Approved Vendor List as below.)

Signature of Bidder EXECUTIVE ENGINEER (M&E)

10.1 63280.00 Providing & erecting of 1 x 4.0 Core x 16 Sq. Mtr 149.79

MM, XLPE (IS: 7098 (i) - 88), ISI Mark,

Armoured cable, Multistranded Aluminium

Conductor suitable for 1.1 kV grade to be laid on

wall with necessary clamps or to be laid 90 Cms

underground in existing cable trench/ pipe at

road crossing or on floor and making the ground

as per original. - For Streetlight between two

poles & Service Connections.(Considering

Mtr. Distance between two poles and extra cable

for loop = 35 Mtr.) (Make- As per Approved

Vendor List as below.)

10.2 465.00 Providing & erecting of 1 x 4.0 Core x 25 Sq. Mtr 187.45

MM, XLPE (IS: 7098 (i) - 88), ISI Mark,

Armoured cable, Multistranded Aluminium

Conductor suitable for 1.1 kV grade to be laid on

wall with necessary clamps or to be laid 90 Cms

underground in existing cable trench/ pipe at

road crossing or on floor and making the ground

as per original. - For Streetlight between two

poles & Service Connections.(Considering

Mtr. Distance between two poles and extra cable

for loop = 35 Mtr.) (Make- As per Approved

Vendor List as below.)

11.1 54420.00 Providing & laying of approved make 50 MM Mtr 61.63

outer dia Doubled Walled Corrugated Pipes

(DWC) of polyethylene (conforming to IS

– II & BSEN-50086) with necessary connecting

accessories like coupler, Tee, L - Bow, etc. of

same material at required depth (90 cms) for

laying of cable below ground/ road surface for

enclosing cable and back filling the same to make

ground as per original & as per instruction of

Engineer Incharge - for Streelight Cable of 1 x

core x 16 Sq. MM. (30 Mtr Per Between two

11.2 5116.00 Providing & laying of approved make 90 MM Mtr 95.01

outer dia Doubled Walled Corrugated Pipes

(DWC) of polyethylene (conforming to IS

– II & BSEN-50086) with necessary connecting

accessories like coupler, Tee, L - Bow, etc. of

same material at required depth (90 cms)

including excavation for laying of cable below

ground/ road surface for enclosing cable and back

filling the same to make ground as per original &

as per instruction of Engineer Incharge - for

Streelight Cable of 1 x 4 core x 16 Sq. MM and

Service cable of 1 x 4 core x 25 Sq. MM. (Make-

As per Approved Vendor List as below.)

Signature of Bidder EXECUTIVE ENGINEER (M&E)

12.1 31.00 Providing and erecting Three Phase IoT Ea 59915.25

GSM/GPRS Central Control & Monitoring

System (CCMS) Panel for Streetlights Smart

Feeder Panel with 3 Phase GSM/GPRS CCMS

Streetlight Controller with LCD Display (1 Nos.).

Streetlight Controller with Individual each Phase

Control (Energy Saving feature) and Spare relay

facility. Streetlight Controller having 10 years of

reserved battery for RTC. With 50 programmable

schedule, month-wise offset settable facility,

Astronomic sunrise/sunset time programming in-

built for year long schedule. Operating Voltage

from 90 VAC to 510 V AC with Over Voltage &

Short Circuit protection. 2 hour Battery Back-up

for Streetlight Controller. Panel to have 1 Nos. of

3 Phase – Class 1 Energy Meter for Energy &

Fault monitoring on CCMS Web Dashboard.

Panel consisting of 3 Nos. of 3 Pole Contactors (3

x 18 A), 7 Nos. of 1 Pole Miniature Circuit

Breakers (32 Amp.) for Bypass, Input / Output

supply functionalities, 1 Nos. of 4 Pole Earth

leakage circuit breaker for safety protection, set

of indicator lamps of LED type lamp (3 Nos.)

lens cover, Bakelite holder complete erected with

necessary connections on outdoor panel board

with Standard PAD lock & key facility for Panel

security. Door Switch for unauthorized access &

tamper detection. Accelerometer for panel

movement detection & tamper alerts. Suitable

amount of Wires, Connectors, Terminal Blocks

included in Panel. 16/18 gauge M S with

industrial exterior powder coated PP with seven

tank process RAL 7035 All weather-proof

Enclosure Panel having IP65 rating and Painting

the number and words for inventory Identification

on erected fittings / equipment’s or Such

accessories as may required with good quality of

enamelled paint as directed by engineer in

charge(i) up to 20 characters, up to 75 mm

height. (As Instructed by engineer in charge.).

Waterproof Glands & Grounding Stand included.

Dedicated IoT communication GSM/GPRS SIM

Card (with minimum 5 years of recharge) for

Wireless Communication with CCMS Web

Dashboard. 5 Years Data Hosting & Server

Charges to be included with CCMS Web

Dashboard. Load status, Live analytics, Energy

Meter monitoring (Parameters such as kW, kWH,

PF, I, V), comparative analytics, reports

generation facility. Fault detection on web

dashboard. GIS Mapping of CCMS Panel on

Web Dashboard. Secured MQTT Communication

for Cloud. Includes Android & iOS Mobile

Application. Local communication facility via

Mobile Application in case of GPRS connectivity

failure via Wifi. (Make- As per Approved Vendor

List as below.)

Signature of Bidder EXECUTIVE ENGINEER (M&E)

12.2 93.00 Providing & Fixing of Heavy-Duty Flange type Ea 46.22

Double Compression brass double Compression

type Cable Gland with rubber ring suitable for 1 x

4.0 Core x 16 Sq. MM PVC Insulated Alu.

Armoured cable complete with outgoing tails,

insulating taps etc. - (2 Nos. Glands at

distribution box & 1 No. Gland at St. Light Pole

= Total 3 Nos.) (Make- As per Approved Vendor

List as below.)

12.3 124.00 Providing & Fixing of Heavy-Duty Flange type Ea 50.50

Double Compression brass double Compression

type Cable Gland with rubber ring suitable for 1 x

4.0 Core x 25 Sq. MM PVC Insulated Alu.

Armoured cable complete with outgoing tails,

insulating taps etc. - (2 Nos. Glands at

distribution box & 1 No.Gland at St. Light Pole =

Total 3 Nos.) (Make- As per Approved Vendor

List as below.)

12.4 496.00 Providing & Fixing of Solderless Crimping Type Ea 14.55

Aluminium Lugs (4 Nos. per termination)

conforming to IS suitable for 1 x 4.0 Core x

16/25 Sq. MM PVC Insulated Aluminium

Armoured cable evenly crimped with high

pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an

approved manner. - (4 Nos. Termination Per St.

Light Pole) - one at transf., two at dist. box &

one at St. Light Pole. (Make- As per Approved

Vendor List as below.)

Signature of Bidder EXECUTIVE ENGINEER (M&E)

12.5 31.00 Supplying & erecting in earthpit of minimum Ea 8634.64

bore dia. 150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of

mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12 mm

with constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit test

certificate including value of earth resistane of

installation.) & having back filling compound of

(B) Inner Chemical (CCm Compound) -

Resistivity :- 0.2 Ohm/meter testing as per IEC

62561-2017 , Voltage Drop :- < 1 volt at no load

& dry form , Sulpher content :- <2% .(C) Back

filling copound :- Earthing compound should be

capable to retain moisture for log time. Necessary

test report must be submitted.

(C) For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

System (like Automation, SCADA) i.e.

independent Earthing located in other than

normal soil i.e. Soft Rock, Marshy Soil etc..-

Length of Pipe : 3 Mtrs. -Back filling Compound

:2 nos Bags of 25 Kg.- (1 Job per Distribution

Box). (Make- As per Approved Vendor List as

13.0 1839.00 Painting the number and words for inventory No. 21.40

Identification on erected fittings / equipment’s or

Such accessories as may required with good

quality of enamelled paint as directed by engineer

in charge(i) up to 20 characters, up to 75 mm

height. (As Instructed by engineer in charge.)

14.0 5116.00 Drilling the road without breaking the road Mtr 513.56

surface (Asphalt) for laying of cable for feeding

power supply by making up to 150mm dia.size of

holes at both ends complete. (As Instructed by

engineer in charge.)

15.0 54420.00 Making trench in hard murrum/ tar road of Mtr 297.86

suitable width of 90 cms or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.(B) If

additional machinery like hammer driller or JCB

use [Add]. (As Instructed by engineer in charge.)

Part - A- Total

Signature of Bidder EXECUTIVE ENGINEER (M&E)

PART - B - (Dismantling Charges, Power Supply Connection Charges, Operation & Maintenance Charges

of Complete Street Light System for 5 Years)-100% expenditure borne by Association)

16.0 40750.00 Dismantling the existing cables of all types & Mtr 5.99

sizes and unloading to Store at Lodhika (Metoda)

Estate complete as per site condition and

instructed by Engineer in charge.

17.0 1630.00 Dismantling the existing any type of street light Ea 213.98

fittings on pole above 6 mtr height with bracket

and making the site as original complete and

unloading to Store at Lodhika Estate as per site

condition and instructed by Engineer in charge.

18.0 15.00 Service Connection Charges includes Liasoning Job 42796.61

Charges for obtaining N.O.C from Electrical

Inspector / Statutory authority for Power / Ele.

Installation on behalf of client and shall be paid

on submission of orignial receipt to Client.

Liasoning Charges shall include preparing

required attasted documents & drawing for

obtaining NOC on behalf of client.

19.0 4.00 Annual Maintenance charge: Agency has to carry Per 838625.66

out Maintenance of the streetlight network after Year

1st year of completion of the project which is

included in Defect Liability Period,in such a way

that through all year,streetlight network will run

with 100% efficiency. Agency has to carry out

Manintenanc with Manpower, Material ,Tools &

Tackles . No extra payment will be provided to

agency. (As Instructed by engineer in charge.)

20.0 5.00 Annual Operation charge: Agency has to carry Per 410415.17

out Operation of the streetlight network after Year

completion of the project which is included in in

such a way that through all year, streetlight

network will run with 95% efficiency. Agency

has to carry out operation with Manpower,

Material ,Tools & Tackles . No extra payment

will be provided to agency (Unskilled Labour

No. & Skilled Labour 1 No.). (As Instructed by

engineer in charge.)

Part - B- Total

Part - A- + Part - B - Total Rs.:

1). Bidder must have to procure OCTAGONAL TYPE STREET LIGHT POLE & LED LUMINARIES as per

Manufacture Authorization Affidavit. (Annexure – C vide Pg No. 57 of Technical cum PQ Bid Document).

2). LED manufacturer abides to authorized affidavit and supply LED LIGHTING/luminaries incl.

microprocessor based programmable Driver for seamless operation with CCMS panel and Gateway using secure

communication with Web based Software with 5 (FIVE) years free Operation & Maintenance

Guarantee/Warranty from the date of completion of Work to the bidder and vice-versa as per tender

specification and terms & conditions of contract.

Signature of Bidder EXECUTIVE ENGINEER (M&E)

3). The quoted price shall include all taxes (excluding GST), duties, levies, overheads, insurance, transportation,

freight, construction cess etc. whatsoever is applicable and the price shall remain firm till the completion of the

project in all respect.

I / we am/are hereby agree to carry out the above work at _____________ % (in figures) above / below

____________________ percent (in words) below/above the estimated rates mentioned above (should be written in

figures and words). Amount of my / our tender works out as under:

*Estimated amount put *Estimated amount

to tender put to tender

Deduct__% below Rs.______________ Add___ % above Rs.______________

In words In words

I /We hereby declare that I /We have visited the site and fully requisite myself / ourselves with the local situation

regarding materials labour and other factors pertaining to work before submitting tender.

I /we hereby declare that / We have carefully studied the conditions of contracts detailed technical specification

and other tender documents of this work and agree to execute the same accordingly.

(1) The materials/sample for work should be got approved from the Competent Authority / Executive Engineer (M&E)

In charge of the work.

(2) The materials and work shall have to be used and carried out as specified in technical note.

(3) All works shall be carried out as per Public Works Department hand book & Other Specification of the Division Or

as directed by Engineer in- Charge/ Executive Engineer (M&E), GIDC, Rajkot.

(4) Rate are Inclusive of 1% Labour cess in Tender amount so 1% of total amount of bill will be deducted from the bill.

(4) Rate are Inclusive of 1% Labour cess in Tender amount so 1% of total amount of bill will be deducted from the bill.

(5) The amount of 15 % from the subsidy of 40 % of PART - A (SITC of Street light Work with Material incl. 5 Years

Free Comprehensive Guarantee – Under A.I.I. Scheme-2020) which is receivable from office of the Industries

Commissionerate, Gandhinagar will have to be deducted from each RA bill submitted by the agency. After the

completion of the project, and the final approval of the Industries commissioner’s Office, Gandhinagar, this

deducted 15% amount will have to be paid to the Agency.

Signature of Bidder EXECUTIVE ENGINEER (M&E)

SCHEDULE OF QUANTITIES

These preambles apply to all the sections of Schedule of quantities and tendered rates shall take into account all these

provisions in other parts of the tendered documents.

1. The quantities in this schedule are provisional. The contractor will be paid for the actual quantity of work executed

at site at the rates quoted in his tender. The Corporation reserves the right to increase or decrease any of the

quantities or to omit any item of work totally and any claim by the contractor in these accounts will not be

2. All the items of work given in this schedule of quantities shall be executed strictly in accordance with the Indian

Electricity Act, the Indian Electricity Rules & Regulations, Requirements of the Electric Supply Authority, National

Electrical Code (NEC) or NFPA 70, is a regionally adoptable standard for the safe installation of electrical wiring

and equipment in the United States. It is part of the National Fire Code series published by the National Fire

Protection Association (NFPA), National Building Code read in connection with the relevant drawings,

specifications and appropriate Indian Standards

3. All measurements shall be taken in accordance with the Indian Standard Electrical installation in Factory method of

measurement of IS 5908/1970 unless otherwise specified.

4. The contractor shall visit the site and shall satisfy himself as to conditions under which the work is to be performed.

No extra claim consequence of ignorance or on grounds of insufficient description will be allowed at a later date.

5. No alteration, whatsoever, is to be made to the text of quantities of this schedule of quantities unless alteration is

authorized in writing by the Corporation. Any such alteration, notes or additions shall unless authorized in writing

be disregarded when tender documents are considered.

6. In the event of error occurring to the amount column of the schedule, as a result of wrong extension unit rate and

quantity, the unit rate quoted by the Tenderer shall be regarded as firm and the extension shall be amended on the

basis of the rates.

7. All error in totaling in the amount column and in carrying forward totals shall be corrected.

8. All error in description or in quantity or omission of items from the contract schedule shall not vitiate this variation

required by the Corporation.

9. Wherever there are similar items appeared in the schedule of quantities under different headings, then the lowest rate

will be considered.

Signature of Bidder EXECUTIVE ENGINEER (M&E)

LIST OF APPROVED VENDORS OF ITEMS / EQUIPMENTS FOR STREETLIGHT

SR. LIST OF ITEMS APPROVED MAKES

1 HOT-DIP GALVANIZED BAJAJ/TRANSRAIL/VALMONT/RR ISPAT/UTKARSH or Eq.

OCTAGONAL POLE Incl. J-TYPE

BOLT and TEMPLET.

2 1.1 KV ELECTRICAL INSULATED AKZONOBLE /HEMPLE/STANVEC/ASIAN PAINT or Eq.

2 DECORATIVE STREET BAJAJ/TRANSRAIL/VALMONT/RR ISPAT/UTKARSH or Eq

LIGHT BRACKET (As per Drawing attached Separately )

3 LED OUTDOOR STREET LIGHT BAJAJ/PHILLIPS/SCHREDER/LIGMAN/WIPRO/ CROMPTON/

4 FR PVC INSULATED WIRE FINOLEX/TORRENT/POLYCAB/RAVIN(PRIMECAB)/KEI/RR

5 XLPE ARMOURED CABLE FINOLEX/TORRENT/POLYCAB/RAVIN(PRIMECAB)/KEI/RR

6 LUG DOWELL's/ISMILE/3D/JAINSON or Eq

7 GLAND COMET/HMI/SIEMENSE or Eq

8 MCCB/MCB/ELCB/MCCB/ ABB/L&T/SIMENSE/HAVELLS/LEGRAND/SCHNEIDER/HAGER

9 DIGITAL TIME SWITCH & ABB/L&T/SIMENSE/HAVELLS/LEGRAND/SCHNEIDER/HAGER

CONTACTOR or Eq

10 DOUBLE WALL DURALINE / JAIN Irrigation/GEMINI/VARAHI/REX/ASTRAL or

(DWC) POLYTHINE PIPE

11 CCMS PANEL MOTWANE/KAKATIYA ENERGY SOLUTION/INSU/HPL

/PYROTECH/MEMIGHTY or Eq.

12 EARTHING RAPID/ASHLOK/OBO/INDELEC/SULAH SAFE SOLTION or Eq

13 LED INDICATION LAMP SIEMENS /SCHNEIDER /L&T /BINAY /ABB /MG /KAPPA

/TECHNIC /GE /VAISHNO

Note :- For percentage/unit rate works, makes other than above which are approved time to time by R&B/

GWSSB/CPWD department and mentioned prevailing (Current) Govt. SOR can be considered /used with prior

approval of the competent authority / E.E (M&E) GIDC, Rajkot

Signature of Bidder EXECUTIVE ENGINEER (M&E)

(Bidder must read carefully and Submit the detail as Required by Annexure – E.)

Particulars and Details to be submitted by the bidder:

In order to properly assess and due diligence on submissions, the Proponent should provide following information on the

quality and photometric of proposed luminaries.

LUMINAIRE SELECTION CRITERIA

DESIGN PARAMETERS: -

It is defined as Performance Parameters and Fixed parameters as below: -

PERFORMANCE PARAMETERS: -

All the luminaries shall be finalised based on the performance requirement as below: -

Type of existing luminaire Rated Wattage of Rated Input Power of

existing luminaire LED luminaire (max.)

Sr. Parameter Data/ Details of For luminaire

(Offer by Bidder)

1 Mounting Height (Vertical Distance 7.2 m (Approx.) for

of luminaires from the floor level) 90W

16 m (Approx.) for

250W (On Entry Gate

2 Width of the road Upto 24 mtr (ROW)

Upto 10 mtr carpet for

250W (On Approx.

Mtr Entry Gate No.1

Signature of Bidder EXECUTIVE ENGINEER (M&E)

3 Average spacing 25 m (As per site

4 Measured Average Illumination 20 lx or more

Level (Based on the maintenance (As per site

factor of 0.90)

5 Tilt Angle (wrt to road surface) 0° to 15°

6 Min. Uniformity Ratio (Emin/ Eavg)

7 Min Transverse Uniformity Ratio

8 Correlated Colour Temperature 3000°Kto 4500°K

9 Colour Rendering Index (min.) >

10 Illumination Regulation <5% (wrt Ta & Line

Note: - Above performance parameter and fixed parameters (1, 3 and 4) shall be proved during on site testing.

Illumination Level:

The detailed calculation with uniform distribution including the lux distribution curve/ graph/spatial

distribution shall be submitted in support of the dimensions selected and variation thereof. The luminaire shall

be so designed that the illumination level shall be evenly distributed and shall be free from glare.

Signature of Bidder EXECUTIVE ENGINEER (M&E)

LED FIXTURES TECHNICAL PARTICULARS:-

The LED Street Light system will have to meet the following Specifications:

Sr No. Description GIDC Requirement Bidder's Specification

1 LED Fixture Make BAJAJ/PHILLIPS/SCHRED

ER/WIPRO/ CROMPTON/

(Mentioned Only One Make)

2 LED Fixture Model No. Bidder has to specify as per

Technical design parameters.

Avg. 20 lx or more

(As per DiLuX/ Software Lux

Level Calculation Mentioned

3 90W & 250W with Fixed

Wattage of Fixtures and Programmable

Driver microprocessor based

Dimmable Driver

Stated Lumens output of For 250 W >=

5 LED Rated Operating Bidder has to specify

6 No(s) of LEDs (Chips) to be Bidder has to specify

Used in Luminaire

7 Luminaire manufacturer Bidder has to specify

8 Rated Input of LED Streetlight Bidder has to specify

9 Initial lumen output (Rated) Bidder has to specify

10 LED Luminaire's IS For 90 W & 250 W (Each)

Registration Number &

11 BIS Certification (must For 90 W & 250 W (Each) –

required otherwise Must be Valid Bureau of

fitting shell not be Indian Standard (BIS)

accepted.) Certification of LED

luminaires respective Model

No / family of LED luminaire

models. (In event of expiry of

BIS of the same model No,

Renewal license application

of same Model to will be

presented along with

technical document

Signature of Bidder EXECUTIVE ENGINEER (M&E)

12 LED Driver’s make, For 90 W & 250 W (Each) –

model no. and IS (BIS approval is must along

Registration Number with R-number allotted by

(R-Number) (Separate BIS.)

Registration Number

(R-Number) must

required otherwise

fitting shell not be

13 Lumen output (as per LM79 Bidder has to specify

report, mentioning current

14 Lumen Depreciation (L70 Bidder has to specify

mentioning temperature in

Deg C and current mA)

15 Lighting Distribution Type Cut Off/ Semi Cut Off type as

Type II/ III Lighting

16 Maintenance Factor

17 Correlated colour >4000K ± 300K (Warm White)

temperature (CCT)

18 Protection Class IP 66 , Class 1 as per IEC

19 Impact Resistance of IK

complete luminaire

20 Avg. Ambient Temperature 35 deg C

21 Avg. Power Factor >

22 Material of Construction: - Bidder has to specify

23 Housing Construction The body shall be robust,

corrosion resistant superior

in finish & without any cracks

or through holes, made in a

single piece by high pressure

die cast LM6 aluminium alloy.

The luminaries shall be

monolithic construction

totally enclosed dust tight &

water proof. The luminaries

shall be class I luminary.

Degree of protection shall be

Signature of Bidder EXECUTIVE ENGINEER (M&E)

IP66 as defined in Appendix A

of IS10322 (Part-I 1982)with

latest amendments.

24 Heat Sink/Dissipation Integrated with in luminaire

& The dimensions of

luminaries shall be adequate

to permit sufficient heat

dissipation through the body

itself, so as to prevent

abnormal temperature rise

inside the lantern &

consequential damage to

cover & gasket materials,

LEDs, lenses & Electronic

25 Covers Toughened glass/IP Lenses. It

shall not get discoloured shall

not suffer degradation due to

heat and ageing. The cover

shall preferably be secured

with suitable metallic or

stainless steel hinges or with

metallic stainless steel hinges

at one end on the footpath

side and with toggle at the

other end. The toggle shall

catch the glass cover firmly

and shall not get released

due to shock, vibrations and

breeze. UV stabilized glass

cover shall not get cracked

due to frequent opening and

closing of hinges and toggle.

When the luminaries is

closed, should conform with

Note : Driver box should

have separate dedicated

cover to ensure IP

protection of the LED side

repair/maintenance.

26 Gasket A extruded silicon loop

gasket shall be provided in

the lantern body to ensure a

weather proof seal between

Signature of Bidder EXECUTIVE ENGINEER (M&E)

the UV glass cover and the

metal housing to exclude the

entry of dust, water, insects,

etc. When the luminaries is

closed, should conform with

IP 66 Class. Felt gasket will

not be accepted.

27 Application Outdoor use

28 System Efficacy - Lm/W at ≥130

35 deg C Amb. Temp.

(supported by LM79 Test

report from government

approved third party lab)

29 Guarantee/ Warranty Five (05) Years Free on-site

replacement Guarantee/

Warranty on the SITC of

LEDs, Fixture & Driver which

covering material fixture,

finish and workmanship.

30 Protection Over Heat, Over Load, Short

Circuit, HV Surge -4 KV

(Inbuilt within Driver)

external 10kv 10ka

30.1 Short Circuit protection Recovers automatically after

fault condition is removed

30.2 Over Voltage protection Should be able to withstand

440V for minimum 4 hours.

30.3 High – Low voltage cut off In side Luminary or a device

to be installed on the pole in

an IP protected box

sustaining 270V for Higher

side cutoff & 140 V on lower

side cut off- Beyond& below

it Shut down & restore

normal working condition

30.4 Earthing Driver Unit shall have

provision for proper

31 Certification LM 79, LM 80, RoHS, EMC,

32 Marking Company LOGO Engraving/

Embossing on Body, GIDC –

Estate Name Marking

(Stickering not allowed)

Signature of Bidder EXECUTIVE ENGINEER (M&E)

33 Electrical Connector LED Wire with Flexible 3core

1.0 Sq MM FRLS copper cable

of Min. 1 meter long should

34 Usage Hours Dusk to Down. (range

hours to 12.30 hours/ day

35 Beam angle 135 deg / 80 Deg

Horizontal Spread 135 Deg. &

Vertical Spread 80 Deg.

36 LED High Power White LED of

Watt and above.

LED should be photo

biological complied only.

Bidder has to specify

36.1 Name of LED chip CREE / OSRAM / PHILIPS

manufacturer Lumileds / NICHIA /

SEOUL/LG Bridge Lux (U.S.A.)

(Mentioned Only One Make)

36.2 LED chip model name Bidder has to specify

36.3 LM 80 report from the LED Bidder has to specify

chip manufacturer on the

lumen depreciation

characteristics of the

specific LED chip employed

in the proposed luminaire

36.4 LED junction temp. in deg >80

36.5 Rated Life of LED Chip at > 50,000 Hrs (with Min. 70 %

L70 (LM 70) Lumen Maintenance @ Ta =

35 deg C ambient temp)

36.6 P/N junction temperature <100 Degrees C at Junction

point and <60 at Heat Sink.

36.7 Lens Material Polycarbonate

36.8 Electrical connector(s) Bidder has to specify

36.9 Optical System The optical system will

consists of individual

Penut/PC/PMMA lenses on

high power LEDs designed &

tested to achieve typical

street lighting distribution

from the LED lantern. This is

to ensure maximum

utilisation of light flux on the

carriageway and minimum

Signature of Bidder EXECUTIVE ENGINEER (M&E)

glare on the footpath side of

the lantern and also in the

direction of vehicular traffic

36.10 Rated Supply Voltage (AC, 230/ 240 V

36.11 Optical Efficiency > 95%

36.12 Working Humidity 10% - 90 % RH

36.13 Working Temp in deg C 00 to 50 deg C

36.14 Input Voltage Range ( Vac) 140 to 270 V AC with Auto

resetting Safety Cut-off.

36.15 Input Frequency 50 Hz +/- 3% Hz

36.16 CRI (Color Rendering Index) >

36.17 Lumen Maintenance Factor 70% upto 50,000 Burning

36.18 Uniformity Ratio >

36.19 Audible Noise Shall have Class-A sound

rating with audible noise in

36.20 Dimensions Bidder has to specify

36.21 Weight Bidder has to specify

37 LED Driver Type and Constant Current

Specification Drivers should be constant

(Fixed Programmable current drivers with separate

microprocessor based compartment, also driver

Dimmable Driver) compartment should be

IP66.Driver should have cut

off protection above 300V AC

and should work

automatically at nominal

voltage. Driver should also

have Double phase

protection, no load, open

circuit and short circuit

protection. SELV (Safety extra

low voltage) complied driver

with less than 60V DC output.

LED drivers used must be

appropriately sealed/

potted. Driver Should be

EMI/ EMC Certified.

Necessary certification

submitted along with data

Bidder has to specify

37.2 Name of the manufacture

(Mentioned Only One Make)

Signature of Bidder EXECUTIVE ENGINEER (M&E)

37.3 Model Name and Number Bidder has to specify

37.4 ≤ 750 mA (For 90W) OR

Driver Current ≤ 1050 mA (For 250W) OR

Bidder has to specify

37.5 Driver Efficiency > 90%

37.6 For 90 W & 250 W (Each)

LED Driver’s rated life Bidder has to specify

(hours) {min. 50,000 (Expected lifetime of the LED

Operating hours) driver used in the

proposed luminaire)

37.7 Additional MOV Must be provided, voltage

protection for protection rating of 270± 1%.

37.8 Protection of MOV must phase-neutral, neutral-earth

cover & phase-earth terminals

37.9 LED driver Cut off Bidder has to specify

Voltage/optional

arrangement (if provided)

37.10 Estimated cost of driver Bidder has to specify

replacement by your

company, including

component and installation

37.11 Control Gear Integral Design (Tested &

Certified for Performance &

Safety mandatory from

Government approved lab)

37.12 Total Harmonic Distortion < 10 %

37.13 Total Harmonic Distortion < 10 %

37.14 IEC/BIS Compliance Confirming to IEC-61347-1 &

IEC 61347-2-13 or BIS

IEC 61547,610-3-2,CISPR-15

38 Certification Electrical safety certification

such as ISI ,BIS.

39 Test Reports:- The tenderer shall submit the

test reports from

Government accredited test

laboratory of offered

luminaires confirming to all

type test as per IS

(Part5 Sec 3)/ IS 16105/106

2012 and essentially

Signature of Bidder EXECUTIVE ENGINEER (M&E)

LM79(For luminaire

efficiency & performance)

and LM80 (For LED Source

life from source

manufacturer) test report as

per International Enginnering

Society of North

America(IESNA) along with

the offer. IP 66 Report for

luminary and driver (for

protection from dust and

water), Type test report of

10KV surge test (For SPD as

per IES 61000-4-5, IK08

report for luminary along

with the offer.

Manufacture’s should have

Valid ISO-9001-2008, ISO

14000 and ISO 45001 or

equivalent certificate for the

Bidder for In-House Design,

Development, Testing,

Manufacturing, Marketing

and Lighting Application.

LM79 report along with

IES file of the luminary

must be from NABL,

ERDA, CPRI, UL or TUV

Note: - Above performance parameter and fixed parameters (1, 3 and 4) shall be proved during on site testing.

Illumination Level:

The detailed calculation with uniform distribution including the lux distribution curve/ graph/spatial distribution shall be

submitted in support of the dimensions selected and variation thereof. The luminaire shall be so designed that the

illumination level shall be evenly distributed and shall be free from glare.

Signature of Bidder EXECUTIVE ENGINEER (M&E)

Design for the GIDC – Estate Road

Sr.No GIDC- Estate specification requirement Bidder confirmation

LED Source (Input Average Illum. LED Source Average Illum. Level

Power) Including Level reqd. on (Input Power) reqd. on road

driver power in Watts road carriageway Including driver carriageway with LED

with LED power in Watts luminaire (Lux)

luminaire (Lux)

1 90 W 20 or More __ __

SIGNATURE AND THE SEAL OF MANUFACTURER SIGNATURE AND THE SEAL OF BIDDER

Signature of Bidder EXECUTIVE ENGINEER (M&E)

TESTING AND DOCUMANTATION

Performance Methods of Required Documentation Bidder to Confirm

Characteristic Measurement

Integral LED Lamp IESNA LM-79- Laboratory test results must be

Efficacy: Light 2008 ANSI C82.2- produced using the specific modules/

Output Input Power 2002 arrays and power supply combination

that will be used in production.

Power Factor ANSI C82.77- 2002 Laboratory test results must be

produced using the specific modules/

arrays and power supply combination

that will be used in production

Lumen Maintenance IESNA LM-80- LED manufacturer test results for

(L70) for LEDs 2008 Minimum 6000 hour lumen

maintenance data for the LED

packages/arrays/modules used in the

integral LED lamp.Lumen

maintenance data must meet at least

the following conditions: - Collected

at LED case or solder point

temperature (Ts) equal to or greater

than the verified TMP temperature of

the integral LED lamp; and-

Measured at a forward drive current

equal to or greater than the drive

current applied to the LEDs in the

integral LED lamp.

Colour Rendering ANSI C78.377- Laboratory test results must be

Index 2008 IESNA LM- produced using the specific modules/

79- 2008 CIE 13.3- arrays and power supply combination

1995 IESNA LM- that will be used in production

Chromaticity & ANSI C78.377- Laboratory test results must be

Correlated Colour 2008 IESNA LM- produced using the specific modules/

Temperature 79- 2008 CIE 15 : arrays and power supply combination

2004 that will be used in production

Colour Spatial IESNA LM-79- Self Certification

Uniformity and 2008 CIE 15 :

Signature of Bidder EXECUTIVE ENGINEER (M&E)

Colour Maintenance IESNA LM-16

Audible Noise Class-A sound Self Certification

rating: Power supply

not to exceed 24 dB

Integral LED lamp Provide copy of the actual three-year

Warranty manufacturer warranty included in

Safety of LED BIS Certificate LED manufacturer test results of the

Lamps safety test report with a general

coverage statement.

Test certificates ERTL / The bidder shall furnish test

CPRI/MNRE certificates certifying performance of

/ERDA/ NABL the integral luminaries’ for the tests

Accredited mentioned as below: a) Insulation

Laboratory resistance test b) HV test c) Over

Voltage Protection test d) Surge

Protection test e) Reverse polarity

test f) Temperature rise test g) Fire

Retardant test h) Photometric tests i)

IP class test j) Power Consumption

Driver Performance Testing

Safety of drives BIS Certificate Valid Driver BIS Certificate should

Surge test IEC 61000-4-5/BIS Laboratory test results must be

produced using the specific modules/

arrays and power supply combination

that will be used in production

SPD Test IEC 61000-4-5/BIS Laboratory test results must be

produced using the specific modules/

arrays and power supply combination

that will be used in production

SIGNATURE AND THE SEAL OF MANUFACTURER SIGNATURE AND THE SEAL OF BIDDER

Document Need to Submitted with Technical – Bid.

Signature of Bidder EXECUTIVE ENGINEER (M&E)

Sr. Description Remarks Mode of Submission

1 LM 80 Report of LED Chip(s) : ___ Attested hard Copy **

2 LM 79 report of LED : ___ -as above-

Luminaire(s) to be offere

3 Impact resistance (IK) test : ___ -as above-

report(s) for all LED luminaires

4 LED driver test report : ___ -as above-

including efficiency

5 LED Driver approval certificate : Documentary evidences are -as above-

issued by BIS with R-Number must.

6 LED Luminaire approval : Documentary evidences are -as above-

certificate issued by BIS must.

7 IES file(s) : The bidder must submit ies file Must be provided for all

generated from LM 79 from UL luminaires within 30 days

or NABL approved laboratory from the date of work order

All bidders must note specifically & submit their offer accordingly: -

• All certificates/ documents/ submission(s) should be sealed and signed by relevant authority/ authorized

person/ authorized signatory only.

• Bidder must check all certificate(s)/ document(s) to be furnished as mention in tender. If it is found (during

any stage) that any content of any certificate/ document is being modified in comparison with the original

then it will be considered as fraudulent practice and the bidder who has submit the offer/ tender will be held

responsible for such practice(s).

• Further, various certificate(s) / document(s), which are issued by the other authority / agency / organization /

govt. body shall be verified with the original certificate(s) / document(s) issued to the bidder, if required.

Moreover, in case it is found that the content of document(s) / certificate(s) is / are modified then action(s)

including debarring the bidder for min. 2 years for participation in any of GIDC's tender/ work and/or other

action(s) as deemed fit as decided by the competent authority shall be taken.

• If, it is found that, OEM has provided wrong / false / manipulated information / data to the bidder then, all

the lighting products of concerned OEM will be banned for min. 2 years or other action(s) as deemed fit as

decided by the competent authority shall be taken.

• All tests defined as “Acceptance Tests” other than IES LM 79 and IES LM 80, are allowed to be carried out

at Manufacturer’s works. LM 79 must be prepared by NABL approved laboratory only. LM 80 report is

prepared by LED Chip Manufacturer.

SIGNATURE AND THE SEAL OF MANUFACTURER SIGNATURE AND THE SEAL OF BIDDER

Signature of Bidder EXECUTIVE ENGINEER (M&E)

E-Tender (Online) Invitation Notice No: 11/2025-56/Sr No.4

Contractor’s/ Bidder’s Undertaking/ Certificate

NAME OF WORK:- Supply, Installation, Testing & Commissioning (S.I.T.C.) of 7 Mtr Hot Dip galvanised

Octagonal Streetlight Poles with LED Lumineries Outdoor Streetlight fitting, control

panel and allied accessories (Considering 25 Mtr. Distance between two poles ) incl.

Years Free comprehensive Guarantee period with 5 Years Operation & Maintenance at

Lodhika, GIDC Estate, District – Rajkot, Gujarat

 I/we hereby declare that I/We have persuaded in detail and examined closely the specifications/ general terms &

conditions/ special terms & conditions/ important instructions/notes described in the tender documents. I/We

hereby agree to be bound by and comply with all such specifications/terms, conditions etc.

 I/We also certify that I/We have visited the sites and inspected the locations of the proposed work and have

collected all information including any minor modification work(s) required at sites before quoting my/our rates.

 I/We also confirm that my/our offer is strictly in line with the tender specifications, stipulations, terms and

conditions etc. and understand that in the event of any deviations, technical or commercial, my/our price bid will

 I/We also confirm that power consumption along with the required parameters will be proven during site testing.

I/ We also confirm that our offer will not be considered in case not opted for site testing of the sample

 I/We have understand the tender specifications/ terms/ conditions/ all content of tender and particularly intent

behind the content and bind my/ ourselves for same.

 If any items/ conditions/ specifications/ scope of work is mentioned differently at more than one place(s) by

chance, most appropriate decided by the department will apply & binding to the tenderer.

SIGNATURE AND THE SEAL OF TENDERER:

Signature of Bidder EXECUTIVE ENGINEER (M&E)

B1 Agreement Form and prevailing circulars

Signature of Bidder EXECUTIVE ENGINEER (M&E)