Loading…
Loading…
Tender Value
₹97.1 L
EMD Value
₹97,100
Closing Date
20 Mar 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Chief Officer VADALI Nagar Palika, VADALI
1. Construction of New Storage Shed for Nagar Palika Use At Najrai Vasahat. (Third Attempt) 2. Construction of Material Recovery Facility Unit at Solid Waste Management Site at VADALI. (Third Attempt)
286095
1 of 2025 - 26
Open
Civil - All
Sabarkantha
3 documents required · 3 mandatory
₹2,832
Chief Officer, VADALI Nagar Palika, VADALI
₹97,100
13 Mar 2026
13 Mar 2026
13 Mar 2026
20 Mar 2026
13 Mar 2026
NAME OF WORK :-
1 Construction of New Storage Shed for Nagar Palika Use At Najrai Vasahat.
2 Construction of Material Recovery Facility Unit at Solid Waste Management Site at VADALI.
No. Description Quantity RATE Per Amount
1 Construction of New Storage Shed for Nagar Palika Use At Najrai Vasahat.
Excavation for foundation upto 1.5m depth including sorting
out and stacking of useful materials and disposing off the
excavated stuff upto 50Meter lead. (C) Hard Murrum
Excavation for foundation for depth from 1.5m to 3.0m
including sorting out and stacking of useful materials and
disposing off the excavated stuff upto 50 Meter lead.(C) Hard
Murrum 34.63 287.47 Cu.M.
Providing and laying cement concrete 1:3:6 (1-Cement : 3-
coarse sand : 6-hand broken stone aggregates 40mm nominal
size) and curing complete excluding cost of formwork in (A)
Foundation and Plinth 17.46 3095.25 Cu.M.
Providing and laying controlled cement concrete M.200 and
curing complete including the cost of formwork and excluding
the cost of reinforcement for reinforced concrete work in (A)
Foundation & Footing 29.79 4355.12 Cu.M.
Providing and laying controlled cement concrete M.200 and
curing complete including the cost of formwork and excluding
the cost of reinforcement for reinforced concrete work in (C)
Ground Beam & Plinth Beam 22.65 6662.97 Cu.M.
Providing and laying controlled cement concrete M200 and
curing complete including the cost of formwork and excluding
the cost of reinforcement for reinforced concrete work in Slab
including C.C.Flooring with trimix vaccum dewatering system
including providing and fixing & removing of 'C' chanels
5 having 3'" x 3" as per required level, slope and thickness of
conrete road with surface vibrator and finishing with power
floater & trowel light brooming the surface & including
cutting & filling of expansion joint as directed by Engineer in
Filling available excavated earth (excluding rock) in trenches
plinth, sides of foundations etc. in layers not exceeding 20cm.
In depth consolidating each disposited layer by ramming and
watering. 76.24 136.92 Cu.M.
Carring out plinth treatment to post construction / existing
structure by spraying chemical solution for termite control
treatment including labour and material consistment with I.S.I
specification. Using Chlordene and Chiorpurfiles 20 EC. As Per
7 6131_paret-II Consentration Weight one percent is
recommended i.e one litre 20 EC chemical emulsion with
liter give 1 % concrentration inclusive of one litre chemical
emulsion appication at the rate of 5 Litre chemical / Sqm of
surface is recommended as per I.S
Filling in plinth with sand under floors including watering
8 ramming, consolidating and dressing complete
Providing and laying controlled cement concrete M.200 and
curing complete including the cost of formwork and excluding
the cost of reinforcement for reinforced concrete work in ( D )
Column 17.91 7539.65 Cu.M.
Brickwork using common burnt clay building bricks having
crushing strength not less than 35kg./Sq.Cm. in Foundation
and Plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B)
Conventional 77.29 4214.33 Cu.M.
Providing TMT Bar FE500D reinforcement for R.C.C. work
11 including bending, binding and placing in position complete
upto floor two level 10227.36 77.29 Kg.
Providing 15mm thick cement plaster in single coat on Rough
(Similar) side of single or half brick walls for interior plastering
12 upto floor two level and finished even and smooth in (i)
Cement mortar 1:3 (1-cement : 3-sand)
20mm thick sand faced cement plaster on walls upto height
10metres above ground level consisting of 12mm thick
13 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick
finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.
Applying two coats of putty & two coats of primer of
approved brand and manufacture on new wall surface to give
14 an even shade including thoroughly brushing the surface free
from mortar dropping and other foreign matter and sand
papered smooth. 457.78 40.59 Smt.
Wall painting (two coats) with plastic emulsion paint of
approved brand and manufacture on undecorated wall
15 surface to give an even shade including throughly brushing
the surfce free from mortar droppings and other foreign
matter and sand papered smooth. 457.78 82.97 Smt.
Finishing wall with weather proof exterior emulsion paint on
wall surface (two coats) to give an required shape even shade
16 after thoroughly brushing the surface to remove all dirt, and
remains of loose powdered materials. etc complete
Providing and fixing rolling shutters of approved make made
of 80 mm wide M.S. laths inter-locked together through their
entire length and jointed together at the ends by end locks
mounted on specially designed pipe shaft with bracket plates,
17 guide channels and arragements for inside and outside
locking with push-pull operation including the cost of hood
cover and spring etc. complete. (B) Shutters having width
Providing and fixing MS Door and Window with Assembly
including Applying priming coat over new steel, Painting two
coats (excluding priming coat) on new steel and Welding
18 using of MS Fram size 50X50X5 middle support of MS Flat
25X3 and MS Door sheet of 1.6mm thick for Door & Windows
as per instruction of engineer in charge.
Steel work, welded in built up sections framed work including
cutting, hoisting, fixing in position and applying a priming coat
of red lead paint. (A)In beams and joists, channels angles
19 Tees, flats, with connecting plates or angle cleats as in main
and cross beams. Hip and jack rafters, purlins conneted to
common rafters and the like
Providing and fixing PUF Insulated continueous sandwich
panels for roofs of total thickness not less than 30 mm made
out from continue line method.Panel shall have 0.5 mm thick
pre coated GI sheet on both side of Polyurethane foam with
external face being corrugated in shape for GI and PU foam
both material.The crest height of the panel shall be of 35mm
minimum wiht 250mm c/c pitch. The Precoated sheet shall be
of minimum 240 mpa steel grade confirming to IS 14246:1995
and shall have zinc coating of 120 gsm as per IS:277 , 5-7
20 microns epoxy primer on both side of the sheet and polyester
top coat 15-18 micron.The PPGI Sheet shall have protective
guard film of minimum 25 microns to avoid scratches wihile
trasportation.The roof panels are laid over a frame work of
trusses, columns and purlins fixed using 90mm self drilling
bolt with rubber washer including all types of flashings. PU
Foam must be self-extinguishing, fire retardant type having
minimum density of 40 Kg/Cu.mt.( +, - 2 Kgs) including
0.25mm craft paper edging,self tapping screws of required
length and nos.etc complete as per structural design and
direction of Engineer-in-charge. 545.64 3146.83 Smt.
IP Bullet Camera 4MP , 3.6mm lens :- Supply, Installation,
Testing & Commissioning of IP CAMERA 4 MP @ 30 fps,
3.6mm lens, with POE, IP 66. METAL ( 30 mtr) Bullet,with
color nIght vision without any flash light on device.
Approved Make :
Panasonic/Avigilon/Spy-I/hi-focus 6.00 11811.95 Nos.
ANPR Bullet Camera 4MP, motorized lens ([email protected]):-
Supply, Installation, Testing & Commissioning of IP CAMERA
MP @ 30 fps, with POE, IP 66. METAL ( 30 mtr) Bullet,defog
and ROI coding.built in micro sd slot,enable for making
2 reports in excel format of registered number plate. support
stream,database upto 10,000 plates. Approved Make :
Panasonic/Avigilon/Spy-I/hi-focus
16ch H.265 NVR 2SATA Support with Hard Drive :- Supply,
Installation, Testing & Commissioning of 16ch H.265 NVR
3 2SATA Support with 30 days of recoring Hard Drive.
Approved Make : Panasonic/Avigilon/Spy-I/hi-focus
Accessories Set: Supply, Installation, Testing & Commissioning
4 of required accessoriesincluding junction box, RJ45
24 Port Patch Panel: Supply, Installation, Testing &
5 Commissioning of 24 port fully loaded patch panel with
patching. Approved Make : Netgear/D-Link/Cisco 1.00 4141.00 Nos.
08 Port POE Network Switch :- Supply, Installation, Testing &
Commissioning of Layer 2 networking PoE switch, 24 #
6 10/100/1000 BT ports, 24ports providing PoE 15Watts per
port, min. Approved Make : Netgear/D-Link/Cisco
System Rack 6U :- Supply, Installation, Testing &
Commissioning of 600 X 600, 6U Rack with cooling fan, power
strip, multi print, front glass door, 2 side ventilation with
appropriate hardware for mounting, one tray, two L Bracket
set. Approved Make :
Elixir/rittal/dlink 1.00 6413.50 Nos.
Poe Junction box:Supply, Installation, Testing &
Commissioning of outdoor POe juction box with power strip,
8 multi print, 2 side ventilation with appropriate hardware for
mounting, one tray, two L Bracket set any standard make.
Cat-6 Cable :- Supplying & laying with erecting outdoor
9 double coated CAT- 6 Cable Approved Make :
DLink/Digisol/HOC 200.00 48.48 Mtr.
25 MM PVC Rigid Pipe :- Providing and erecting ISI mark
Medium class RIGID 25 MM PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with adhesive
solution & Clamps with following dia of pipes, in approved
manner as directed any standard 150.00 28.28 Mtr.
Pole:Providing, installing, testing,commissioning of Highly
Corrosion Resistant Galvanized steel ple coates with corrosion
resistant coting with 2.5 - 3mm gauge thickness, 3-inch
diameter, 15 ft. highs with base plate of foundation and
feet RCC foundation. Make: Any Make
32'' full HD tv:Supply, Installation, Testing & Commissioning of
32'' full HD television (Including movable Stand). Resolution
12 1080p full HD,2+ USB,Headphone Out,1+AV,1+RF,HDMI-
2,steareo Sound Approved Make :Samsung,Sony,NV
ELECTRIFICATION
1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire
of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires up to 10 mtr
length , in below type of pipe erected with 6A Modular type
switch / bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden box, single
mounting base frame covered with textured/metallic/white
front plate modules erected on / in wall / ceiling as per pipe
erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III 24.00 485.81 PT.
2 Point wiring for FAN with 2-1.5 sq.mm & earth wire of
sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS
PVC insulated multi strand copper wires up to 10 mtr length,
in below type of pipe erected with 6A Modular type switch
and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following
type erected on PVC / Metallic/Wooden box, single mounting
base frame covered with textured/metallic/white front plate
modules erected on / in wall / ceiling as per pipe erected.
with necessary ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III 12.00 674.68 PT.
3 Supplying & erecting energy saving Energy Efficient E+ (1 -
ft) 28 watt retrofit tube fitting with one no 28watt T-5 tube
complete with E.G.P. wings reflector / clear acrylic guard
cover & tube and electronic inbuilt circuit ballast of rating
130 to 325 V A.C. The fittings should be able to fit in any
conventional existing T - 8 tube fittings complete erected in
an approved manner 12.00 493.89 Each.
4 Point wiring for Individual Plug with & earth wire of
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in
below type of pipe erected complete with Modular type
switch & 5 pin Plug erected on PVC / Metallic/Wooden box
covered with appropriate front plate modules erected on / in
wall / ceiling as per pipe erected with following type of
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from
nearby switchboard/mcb db board
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III 8.00 510.05 PT.
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.
Wire from mcb db board.
(f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III 6.00 745.38 PT.
5 Providing following type of Modular Type Accessories
mounted with PVC / metallic/Wooden box, single mounting
base frame covered with textured / metallic/white front plate
, modules erected with necessary connections as per site
situation directed by Engineer In charge.
6A Double Pole Modular MCB Switch 2.00 410.06 Ea.
16A Double Pole Modular MCB Switch 1.00 410.06 Ea.
6 Supplying and erecting LED indoor fittings with LEDs of
wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,
with housing used as a heat sink shall be made of thick sheet
Steel conforming to IS: 513/CRCA/aluminium pressure die
cast powder coated and high U.V. & corrosion resistance
with diffuser housed in aluminium casted body with
company mark/name 160V to 270V,Power Factor more than
0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>
lumens/watt ,LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount
Downlight with provision for spring loaded mounting clips
(iii) 16-20 watts, Surge-2 KV Cat-lll 12.00 589.84 Ea.
7 Providing & erecting Approved make Ceiling Fan with double
ball bearing ISI mark with Condenser 230 volt A.C.50 Hz
mm sweep complete having 3 blades aluminium body and
blade sets having ornamental design shanks , canopy erected
with earthing. [ Make shall be approved by Engineer in
Charge] 12.00 2311.89 Ea.
8 Providing & erecting 240 V MCB double pole switch for
lighting Load (B Curve) having 10 KA breaking capacity &
confirms to IS : 8828 in existing box having following capacity
(A) 6 to 32 Amp. Cat.III 1.00 278.76 Ea.
providing and erecting Miniature circuit breaker single pole
6A to 25A suitable to operate on 240 V A.C. system and
having breaking capacity 10 KA to be erected in existing box.
confirming to IS 8828/1996 with ISI Mark Cat. III
9 Providing and erecting Sheet Steel powder coated MCB
distribution board - flush / surface mounted fitted with
busbar, neutral link, earth bar and DIN rail, Conforms to IS
8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for
(A) single phase incoming and horizontal single phase
outgoing (b) sheet steel double door (IP-43) (iii)8 way 1.00 1152.41 Ea.
10 Providing and erecting Pipe type earthing having
cms.long and 2.5 cms. dia. galvanised iron pipe with coupling
and buch buried in specially prepared earth pit complete with
necessary 8 SWG earth wire. 1.00 368.65 Ea.
11 providing and erecting Approved make RCCBs conforming to
IS: 12640 and having sensitivity of 30 mA and Short Circuit
withstand capacity of 10 KA and suitable for operation on
single phase 240 V,50Hz. having characteristic of quick action
& tripping with all advance feature & do not incorporate any
electronic component. for following Max. rating erected as
directed (i) 25 Amps.DP Cat III
12 Providing & erecting 415V MCB Four Pole Switch for Lighting
Load (B curve) having 10KA breaking capacity & confirms to IS
:8828 in existing box having following capacity (a) 6 to
Amp. Cat. III 1.00 578.73 Nos.
Sheets steel powder coated enclosure suitable for
incorporating One/Two nos. MCB. 1.00 176.75 Nos.
1 Box Cutting the road surface to proper slope and camber for
making a base for road work including removing the
excavated stuff and depositing on the road side slope as
directed up to 50 Mt.Lead 15.00 109.05 Cu.M.
2 Providing and laying cement concrete 1:3:6 (1-Cement : 3-
coarse sand : 6-hand broken stone aggregates 40mm nominal
size) and curing complete excluding cost of formwork in (A)
Foundation and Plinth 10.00 2769.69 Cu.M.
3 Providing and laying controlled cement concrete M200 and
curing complete including the cost of formwork and excluding
the cost of reinforcement for reinforced concrete work in Slab
including C.C.Flooring with trimix vaccum dewatering system
including providing and fixing & removing of 'C' chanels
having 3'" x 3" as per required level, slope and thickness of
conrete road with surface vibrator and finishing with power
floater & trowel light brooming the surface & including
cutting & filling of expansion joint as directed by Engineer in
2 Construction of Material Recovery Facility Unit at Solid Waste Management Site at VADALI.
Excavation for foundation upto 1.5m depth including sorting
out and stacking of useful materials and disposing off the
excavated stuff upto 50Meter lead. (C) Hard Murrum
Providing and laying cement concrete 1:3:6 (1-Cement : 3-
coarse sand : 6-hand broken stone aggregates 40mm nominal
size) and curing complete excluding cost of formwork in (A)
Foundation and Plinth 39.04 3095.25 Cu.M.
Providing and laying controlled cement concrete M.200 and
curing complete including the cost of formwork and excluding
the cost of reinforcement for reinforced concrete work in (A)
Foundation & Footing 30.89 4355.12 Cu.M.
Providing and laying controlled cement concrete M.200 and
curing complete including the cost of formwork and excluding
the cost of reinforcement for reinforced concrete work in (B)
Providing and laying controlled cement concrete M200 and
curing complete including the cost of formwork and excluding
the cost of reinforcement for reinforced concrete work in Slab
including C.C.Flooring with trimix vaccum dewatering system
including providing and fixing & removing of 'C' chanels
5 having 3'" x 3" as per required level, slope and thickness of
conrete road with surface vibrator and finishing with power
floater & trowel light brooming the surface & including
cutting & filling of expansion joint as directed by Engineer in
Filling available excavated earth (excluding rock) in trenches
plinth, sides of foundations etc. in layers not exceeding 20cm.
In depth consolidating each disposited layer by ramming and
watering. 7.72 136.92 Cu.M.
Providing TMT Bar FE500D reinforcement for R.C.C. work
7 including bending, binding and placing in position complete
upto floor two level 7400.25 77.29 Kg.
Structural steel work (confirming to IS 4923-
1997)riveted,bolted or welded in builtup for all type
section,in framed work,including cutting, hoisting fixing in
position and applying a priming coat of approval steel primer
all complete as per structural design and direction of
engineers in charge. 9705.96 131.83 Kg.
SUPPLYING & FIXING with all required labour and machinery
Color coated Galvalume SPIDER ROOFING SHEET -
No. of Bays-1, Span (Mt.)-15.00, Length (Mt.)-22, Height (Mt.)-
9 7.50, Arch Rise (Mt.)-3.00, BMT - 0.80mm, APT - 0.85mm,
Tolerance : +/- 0.02mm, Coil width : 912mm, Tolerance : +/-
Providing corrugated G.I. sheet of class-3 roofing fixed with
glavanished iron J or L Hooks, Bolts and nuts 8mm diameter
with bitumen and G.I. limpet washer or G.I. limpet washer.
filled with white lead complete excluding the cost of purlins,
Rafters and Trusses.(1) 0.80 mm thick sheet.
ELECTRIFICATION WORK
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire
of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires up to 10 mtr
length , in below type of pipe erected with 6A Modular type
switch / bell push & accessories and earth continuity of
1 following type, erected on PVC / Metallic/Wooden box, single
mounting base frame covered with textured/metallic/white
front plate modules erected on / in wall / ceiling as per pipe
erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.
(a) with medium class Rigid PVC pipe and accessories erected
flushed on wall/ceiling complete Cat. III 20.00 445.00 Ea.
Point wiring for Individual Plug with & earth wire of
sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in
below type of pipe erected complete with Modular type
switch & 5 pin Plug erected on PVC / Metallic/Wooden box
covered with appropriate front plate modules erected on / in
wall / ceiling as per pipe erected with following type of
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from
nearby switchboard/mcb db board
(a) with medium class Rigid PVC pipe and accessories erected
flushed on wall/ceiling complete Cat. III 18.00 471.00 Ea.
[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire
with 2.5 sq.mm ( green) earthing wire from mcb d b board
(a) with medium class Rigid PVC pipe and accessories erected
flushed on wall/ceiling complete Cat. III 12.00 829.00 Ea.
Providing and erecting indoor type halogen fitting made from
M.S. sheet with Aluminium reflector and holder with halogen
tube of following size. (B) With 1000 watt Halogen Tube Cat.
Providing & erecting 240 V MCB double pole switch for
lighting Load (B Curve) having 10 KA breaking capacity &
confirms to IS : 8828 in existing box having following capacity
(B) 40 Amp. Cat. III 8.00 293.00 Ea.
Providing and erecting Approved make RCCBs conforming to
IS: 12640 and having sensitivity of 30 mA and Short Circuit
withstand capacity of 10 KA and suitable for operation on
single phase 240 V,50Hz. having characteristic of quick action
& tripping with all advance feature & do not incorporate any
electronic component. for following Max. rating erected as
directed (iii) 63 Amps. DP Cat. III
Supplying & erecting Sheet Steel powder coated Cable end
termination Box to be mounted on Top or Bottom of the
6 MCB Distribution Box for housing/covering Extra wires &
Cables, suitable for following size of MCB DB Box. (G) Three
Phase 8 Way 1.00 683.00 Ea.
Supplying & erecting earth pit of minimum bore dia.150mm
size approved make Earthing Electrode consisting Pipe-in-Pipe
Technology as per IS 3043-1987 made of corrosion free hot
dipped G.I.Pipes having Outer pipe dia of 50mm having 80-
200 Micron galvanising, Inner pipe dia of 25 mm having 200-
250 Micron galvanising, connection terminal dia of 12mm
with constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for following
type of applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test certificate
7 including value of earth resistance of installation duly
stamped and signed by agency and officer Incharge has to
ensure the value of earthing resistane mentioned in test
Certificate) & having back filling compound of (B) Inner
chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter
testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no
load & dry form, Sulphar content:- <2%(C) Back fill Compound
:- Earthing compound should be capable to retain moisture
for long time Necessary test report must be submitted by
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg. 1.00 4546.00 Ea.
Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured
8 copper cable 1.1 KV grade to be erected as directed of
following size.
(A) 2 core 2.5 Sq. mm 72.00 100.00 Mtr.
(G) 3 core 6 Sq. mm 50.00 290.00 Mtr.
NOTE :-The rates quoted shall be exclusive of GST but Inclusive of all other taxes, duties which shall not be paid
extra. While GST will be paid for admissible part of actual work done at the approved tender rates. GST Shall be
paid as per prevailing rates at the time of payment.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01. Invitation.pdf
02. SBD.pdf
03 GENERAL TECHNICAL SPECIFICATIONS.pdf
05. General Notes conditions.pdf
Schedule B..pdf
Civil Work Specification.pdf
Test Schedule.pdf
Download all tender documents and submit your bid