e-TENDER FOR ROUND THE CLOCK ELECTRICAL ANNUAL MAINTENANCE WORKS, AT ASSAM UNIVERSITY, SILCHAR (FY 2024-2025).

Amount

Luminaries

Supplying with fitting fixing of LED bulb (B22, white colour) luminaries complete including connection as approved by the Deptt.with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department directly on wall / ceiling in existing holder including connection as approved and as directed by the department.

7 Watt (B22, white colour)

12/15 Watt (B22, white colour)

Supplying with fitting fixing of T8 retro LED batten Tube lights(TL) luminaries in existing TL fittings complete directly on wall / ceiling in existing fitting including connection as approved and as directed by the department. (Philips/Havells/Bajaj make)

18/20 W LED TL

Supplying fitting & fixing of LED Tube Light fitting & fixture complete, 20/18 W surface and wall mounted LED batten lights, in extruded aluminum housing provided with poly carbonate diffusers and integrated electronic driver & with all accessories electronic drivers, holders required for completing the installation & as directed by department.(Make: Havells Endura Linear Neo/Bajaj/Phillips/Jaguar)

Supplying fitting & fixing of Surface Batten for LED(18/20 W) with G13 holders required for completing the installation of T8 LED tube as directed by department..(Make: Havells /Bajaj/Phillips/Jaguar)

Supplying fitting & fixing of surface 12 W LED round/square lighting fixtures with die cast aluminum housing (square/round, size 175mmX175mm/dia 175 mm), with all accessories electronic drivers, holders required for completing the installation as required & as directed by deparment.Specification details 100 lm/watt, 2.5-2 kV surge protection, pf>0.9,Voltage range (100-300)V,CCT 6500+/-300 K ,CRI >75,Glare free as per IS 103322.(Make: Havells /Bajaj/Phillips/jaguar)

Switch and Sockets

Supplying fitting & fixing of following in existing PVC/Ebonite sheet boards with required cutting of board/sheet complete including connection as approved by the Deptt.with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed and specified by the deptt.

230 V , 5/6 A single pole switch (one way) PIANO type ,White Colour

230 V ,15/16 A single pole switch (one way) PIANO type ,White Colour

230 V,6A ,3 pin Socket Out let

230 V,16A , 6/5pin Socket Out let

Supplying fitting & fixing of following complete including connection as approved by the Deptt.with 2.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed and specified by the deptt.

230 V,6A , S.S. combined

Supplying including fitting fixing of Bushing, Thrust plate for submersible motor pump set as required complete.

230 V,16A , S.S. Combined

Supplying fitting & fixing of Ceiling Rose, 3 pin, 5 A complete including connection as approved by the Deptt

Supplying with fitting fixing of 6 amp one way modular clip in switch (Anchor/L&T/Havells) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/10/13 Amps (Anchor/L&T/Havells) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , (Anchor/L&T/Havells) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch, (Anchor/L&T/Havells) including making necessary connection as per direction of department.

Supplying with fitting and fixing of 120 watt electronic modular STEP speed control 2 - module type (Anchor/L&T/Havells) including making necessary connection as per direction of department.

120 watt electronic modular step speed control 2 - module type

Wiring works

Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt.

Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.

Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete.

Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity.

With 2 x .75 sq. mm. + earth continuity with 1x0.75 sq. mm. in flat 19 mm ISI marked casing 'n' capping system.

With 2 x 1.0 sq. mm. + earth continuity with 1x1 sq. mm. in flat 19 mm ISI marked casing 'n' capping system.

With 2 x 1.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system.

With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system.

With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system.

With 3 x 10 sq. mm. + earth continuity with2x 6 sq. mm. cable in flat 25 mm ISI marked casing 'n' capping system.

supply and fixing of 20 mm dia. ISI marked, PVC conduit

supply and fixing of PVC flat casing capping on wall/ceiling as per IS specification and as directed by deptt.

Ceiling Fan/Exhaust/Wall Fan:

Repairing and rewinding of field coils including VIR looping ,winding, varnishing, testing complete of Ceiling fan/wall Fan/Exhaust fan/Stand fan.The works shall include both dismantling and reinstallation charges as required and directed. The old burnt coils are to be handed over to deptt.

Repairing of BLDC Ceiling Fan by supplying installation of PCBA(Controller Board) single phase, frequency 50 Hz and inbuilt 5 KVA surge protection. (Generic /ISI marked/BIS certified)

Repairing of ceiling fan complete with supplying and fitting fixing including testing. The works shall include both dismantling and reinstallation charges as required and directed.

Ball bearing

Fan bushing

Supplying including fitting and fixing of the following Ceiling/Exhaust/Wall/ stand fans including connection as approved by the Deptt.with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department.

Exhaust Fan 300 mm Heavy Duty, 1400 rpm

Exhaust Fan 225 mm , Domestic

High speed 1200 mm swep Ceiling Fan

Wall Fan

Supplying including fitting and fixing of the following including connection as approved by the Deptt.with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department.

Stepped type Fan regulator

supplying fitting fixing of 2.5 MFD fan capacitors 230/415 V ,AC, 50 Hz complete including connection as approved by the Deptt.with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department as directed and specified by the deptt

Fitting fixing of 1200 mm Ceiling fan

Fitting fixing of exhaust fan/Wall fan

MCB/DB

Supplying fitting fixing of complete including connection as approved by the Deptt.with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department as directed and specified by the dept

2+2 way, SPN, single door, MCB DB

2+4 way, SPN, single door, MCB DB

4 way (4+12), TPN, MCB DB, single door, horizontal type

Supplying fitting fixing of complete including connection as approved by the Deptt.with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department as directed and specified by the dept

6 A,-32A , 230 V/415 Volts ,50 Hz,SP MCB MCB "C" series ,10 KA rating

40 A, 230 V/415 Volts ,50 Hz, DP MCB,MCB "C" series ,10 KA rating with SS Enclosure

63 A, 230 V/415 Volts ,50 Hz, TPN MCB MCB "C" series ,25 KA rating with SS Enclosure

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 35/36 KA 415V 50 Hz 3P MCCB (ABB(S6) , Schneider, legrand, Siemens, L&T D-shine make)

250 A with sheet steel enclosure

400 A with sheet steel enclosure

Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.(ABB, Schneider, legrand, L&T make)

100A with sheet steel enclosure

400 A with sheet steel enclosure

250 A with sheet steel enclosure

LT Line Works:

Supplying and fitting fixing of galvanised channel of 100 mm x 50 mm x 65 x 2200 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department.

Supplying and erection of L.T. Pin insulators with G.I. pin complete with blots and nuts coach screw etc. as required and as directed by the department.

Supplying and erection of L.T. Shackle insulators with shackle strap complete with blots and nuts coach screw etc. as required and as directed by the department.

Supplying and string up (3ph-4wire) AAAC Rabbit conductor in the existing P.S.C./ M.S/ Galvanized pole with binding etc. as required and as directed by the department.

Repairing, rebinding , jointing , jumpering of burnt/lose existing LT connections and bindings of pin insulator, shackle insulators, LT line spans etc complete with required binding material, nuts and bolts for proper operation as directed complete.

Repairing, & jointing of burnt/lose existing LT UG cable connections of transformer, distribution panel complete with required binding material, nuts and bolts,lugs etc for proper operation as directed complete.

Cutting and trimming of trees, shrubs, bushes etc and keeping the LT line spans , poles , stay set feeder pillar, outdoor distribution panel and transformer surrounding free from vegetations and ensure that proper and safe operation of the LT line and as directed.

Repairing and replacement with re-wire able fuse units of burnt/loose connection of existing capacity incoming and outgoing switchgears,bus-bar of indoor/outdoor distribution feeder/panel wit required size nuts,bolts,lugs etc complete for safe operation of the existing panel as directed.

Painting and repairing of existing feeder pillars with required welding of door hinges ,sracping and sand papering of the panel surface and applying two coats of approved paint as directed by deptt.

Cleaning, painting, varnishing of transformer tank both inside and outside of existing transformer with required scarping and sand papering of the panel surface and applying two coats of approved paint as directed by deptt.

LT pole painting of 8.5 mtr pole , LT channels, cross arm, clamps complete with required scarping and sand papering of the pole surface and applying two coats of approved paint as directed by deptt.

HT line Works

Supplying and string up (3-ph, 3 wire) AAAC Racoon conductor in the existing P.S.C./ M.S/ Galvanized pole with binding etc. as required and as directed by the department. Directed by the department.

Supplying and fitting fixing of 11 KV T Cross arm complete with clamps ,blots, nuts etc. as required and as directed by the department.

Supplying and erection of 11 KV Pin insulator (Poly) with G.I.pin, blots and nuts coach screw etc. as required and as directed by the department.

Supplying and erection of 11 KV Disc insulator (Poly) 45 KN with hard ware fittings etc. as required and as directed by the department.

Supply and erection of 15/ 6 amp aerial fuse complete as required and as directed by the department.

Supplying and erection of 30 Amp aerial fuse complete as required and as directed by the department.

Supplying and fixing of 11 KV 400 A Gang operated switch with all accessories complete as required and as directed by the department.

Supplying and fixing of 11 KV 150 A D.O. fuse set complete as required and as directed by the department.

Supplying and fixing of 11 KV 5 KA Lighting arrestor (Poly) set complete as required and as directed by the department.

Supplying and fixing of following for proper operation of transformer

HT Brass Spandle

LT Brass Spandle

Brass nuts for LT & HT side of Transformer.

Oil Seal for LT & HT side of Transformer.

Gasket for LT & HT side of Transformer.

LT transformer bushing

HT transformer bushing

Transformer oil

Repairing, rebinding , jointing of burnt/lose existing HT connections and bindings of pin insulator, disc insulators, DO fuse set, GOAB switch set, HT line spans etc complete with required binding material, nuts and bolts for proper operation as directed complete.

Cutting and trimming of trees, shrubs, bushes etc and keeping the HT line spans , poles and stay set free from vegetations and ensure that proper and safe operation of the HT line and as directed.

HT pole painting of 13 mtr pole ,HT cross arm, HT channels, clamps complete with required sracping and sand papering of the pole surface and applying two coats of approved paint as directed by deptt.

Street light works

Supply fitting fixing of 100/120W LED roadway luminaries made of pressure die cast aluminum IP66 housing with hihg power LED as lighting source with toughened glass top cover and separate driver compartment and impact resistance of IK07 and 10 KV built-in surge protection. The roadway LED light fixture should be fitted in the existing double arm GI poles at site complete with required clamps and nuts bolts. (make Havells pearls magnum/ Bajaj/Phillips)

Supply fitting fixing of 36/30W LED street light in aluminum pressure die cast housing with toughened glass cover (IP66 rating) with external SPD (10 KV), CCT 5700K.

Supply fitting fixing of MS street light bend pipe of length 1ftX1ft , 50mm dia suitable for mounting LED street lights with required pole clamps and nuts bolts complete as directed.

Fitting & fixing and repairing of the Street light/compound light luminaries in the existing pole including making necessary connection as approved by the Deptt.)with 2 ×1.50 sq.mm F.R. Multistrand and P.V.C. insulated single core copper cable as specified and directed by the department.(material to be provided departmentally)

Double arm street light (32 ft height)

Single arm street/compound light (20 ft height)

Repairing and tightening street light connection/ loop box connection for proper operation of street light fittings as directed by the deptt.

Repairing and tightening street light connection/ loop box connection for proper operation of street light fittings as directed by the deptt.

Supply fitting fixing of the following LED Drivers and accessories as directed and complete

LED driver for 30W LED street Lights(OEM/Generic make/ISI/BIS certified)

LED driver for 25W LED street Lights(OEM/Generic make/ISI/BIS certified)

LED driver for 120W LED street Lights(OEM/Generic make/ISI/BIS certified)

LED driver for 100W LED street Lights(OEM/Generic make/ISI/BIS certified)

SPD for 30W LED street Lights(OEM/Generic make/ISI/BIS certified)

SPD driver for 25W LED street Lights(OEM/Generic make/ISI/BIS certified)

SPD for 120W LED street Lights(OEM/Generic make/ISI/BIS certified)

SPD for 100W LED street Lights(OEM/Generic make/ISI/BIS certified)

Reparing of High Mast lights including lowering and raising of the mast head frame with required wattage flood light supply fitting fixing complete as directed by the department.

Acessories

Supplying fiting fixing of 4X4 PVC board

Supplying fiting fixing of 7X4 PVC board

Supplying fiting fixing of 6X8 PVC board

Supplying fiting fixing of 8X10 PVC board

Supplying fiting fixing of 7X4 ebonite sheet alongwith fitting of switches and socket as directed.

Supplying fiting fixing of 8X10 ebonite sheet sheet alongwith fitting of switches and socket as directed.

Supplying fiting fixing of pendant holder.

Supplying fiting fixing of batten holder.

Supplying fiting fixing of 5/15A 3 pin top

Supply fitting fixing of 2 core 6 sq mm weather proof AL conductor as directed and complete

Supply fitting fixing of 2 core 10 sq mm weather proof AL conductor as directed and complete

Installation of Exhaust fan up to 450 mm sweep in the including making the hole to suit the size of the exhaust fan, making good the damages, testing, commissioning etc. as required complete

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Supplying and fixing 150 AH tubular battery for inverter operation in exchange of existing battery.The battery supplied should have minimum full replacement warranty for 24 months as directed. (Make Exide/Amaron/Luminous)

Supplying and erection MS pole 8.5 metre long, the pole is to be erected in 1:2:3 plain cement concrete foundation of size 1.50 m x 0.45 m x 0.45m having including edge brick soiling and plastering above G.L. portion (0.30 metre complete with excavation of earth, handling of Surplus Soil, debris etc. to the proper place and refilling etc complete with Aluminum paint on the pole surface as specified and as directed by the department.

Supplying of 2 liter packaged distilled water bottles for battery refill and recharge maintenance as directed.

Hire charges

Hiring of the following items as directed by department:

Hiring chares for supply fitting fixing of tuni light (20 feet length) complete and as directed.

Hiring chares towards recurring charge for supply and installtion of tuni light (20 feet length) complete and as directed.

Hire charge of 2X2.5 sq mm for main /sub main line with the p v c insulated aluminium conductor cable in open system complete with drawing cable as directed by the Deptt (Installation charge)

Hire charge towards recurring charge of 2X2.5 sq mm for main /sub main line with the p v c insulated aluminium conductor cable in open system complete with drawing cable as directed by the Deptt.

UG cable works

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminum conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .

10.00 Sq.mm 3 Core armoured U.G. cable ,3 Core A2XWY A2XFY

35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable , 3 & 1/2 Core A2XFY

95.00 Sq. mm.3 & 1/2 Core armoured U.G. cable , 3 & 1/2 Core A2XFY

185.00 Sq. mm.3 & 1/2 Core armoured U.G. cable , 3 & 1/2 Core A2XFY

400.00 Sq. mm.3 & 1/2 Core armoured U.G. cable , 3 & 1/2 Core A2XFY

Supplying of Unskilled man power as required for urgent and emergency electrical works.

PROTIMA TRADERS AND ELECTRICAL SHOP