Construction of City Convention Centre-cum- Parking at Dharamshala, Distt. Kangra HP (Deposit work)

Amount

Excavation in foundation, trenches etc. in earth work by mechnical means (hydraulic excavator/ manual mean in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, shuttering and pumping out water upto any depth or any quontam of water including slush which may be arise during de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-In-Charge and retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per approved drawing, design and specifications, as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depths as per approved drawing, design and specifications, as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts Square, rectangular or polygonal in plan as per approved drawing, design, specifications, as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing and (except spiral stair cases) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls under any thickness as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Weather shade, Chajjas, corbels etc. including edges as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Small lintels not exceeding 1.5 m ( one decimal five metre) clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 (one cement isto two Sand isto four graded stone aggregate 20mm ( twenty milimetres) nominal size) and curing complete mechanically mixed and vibrated excluding cost of form work in foundation and plinth as per approved specification, drawing and design complete upto floor all level within all leads, lifts and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto Four sand isto Eight graded broken/crushed stone aggregate 40mm (Forty milimetres ) nominal size and down gauge) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying upto floor all level reinforced cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (twenty five newton per Square millimetre) with cement contents not less than 360 kg (Three hundred sixty kilogram) mechanically mixed and vibrated including curing complete but excluding the cost of reinforcement for reinforced concrete work in walls any thickness but not less than 0.10 mtr. ( zero decimal one zero metre ) thickness in suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Filling in plinth with stone under floor including watering, ramming, consolidating and dressing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Coursed rubble masonry ( first sort) with hard stones of approved quality in foundation and plinth in Cement Mortar 1:6 (one cement isto six sand) including raking out joints and curing complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 ( M- twenty) design mix to obtain the compressive strength of 20N/mm 2 (twenty newton per Square metre) for reinforced cement concrete work, using cement contents not less than @ 330 kg/cum. ( three hundred thirty kilogram per cubic metre) or as per approved design mix for work upto plinth level to give a smooth surfaces mechnically mixed and vibrated in clading curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 ( M- twenty) design mix to obtain the compressive strength of 20N/mm 2 (twenty newton per Square metre) for reinforced cement concrete work, using cement contents not less than @ 320 kg/cum. ( three hundred twenty kilogram per cubic metre or as per approved design mix for work above plinth level to all floor level to give a smooth surfaces mechnically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D (Fe- five hundred) or more of Tata Tisco/ Sail for reinforced cement concrete work including straightening, cutting, bending, binding placing in position all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred milimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 20mm (Twenty milimetres nominal size) and curing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade VG-10 (viscosity grade - ten) of approved quality using 1.7kg (one decimal seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in super structure : cement mortar 1:4 (one cement isto four coarse sand) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Brick work using Second Class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. channels Frames 75 X 40 X 4 mm ( seventy five into forty into four milimetre) M.S. angle iron 25 X 20 X 3 mm ( twenty five into twenty into three milimetre) for doors, dormor, windows, frames manufactured from M.S. T - section 25 mmx 25 mmx 3 mm ( twenty five milimetre into twenty five milimetre into three milimetre) and Z- Sections with M.S. flat 75mmx4mm ( seventy five milimetre into four milimetre) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold of M.S. angles means lugs, with split end tails to each jamb including iron butt hinges 2.5mm ( two decimal five milimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing coloured anodised aluminum ( andoised tranparent or dyed to required shade according to IS :1868, Minimum anodic coating of grade AC 15) sub frame work for door, windows and ventilators of section No. 14081 or an specified of Jindal/ Hindalco with extruded built up standard tublar sections fixed with dash fastener of required dia and size as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing coloured anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868 minimum anodic coating of AC 15 ( fifteen) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z - sections and other sections of Jindal/ Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required as directed by Engineer- in - charg, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors of Stainless steel (grade 304) wire gauze of 0.5 mm ( five decimal zero milimetre) diametre wire and 1.4 mm ( one decimal four milimetre) aperture on bothsides as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 8mm (eight milimetre) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm (two hundred milimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete ( Only weight of grill to be measured for payment ) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providng and fixing 12mm thick Phenol bonded (both side) prelaminated BWP Grade partical board in matt finish flat pressed three layer or graded wood partical board conforming to IS :12823 of Action Tesa/Greelam/Merinolam/Kitlam/ Vista of approved shade Grade - I, Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/stainless steel screws etcetera complete as per architectural drawing and direction of Engineer- in- charge. Pre-laminated partical board with decorative lamination on one side and balancing lamination on other side as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing door frames, 30mm (Thirty millimetres) thick factory made PVC panelled door shutter of Rajshri ( code No. 9.120) consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19mm x19mm (Nineteen into nineteen millimetre) for styles and 15mmx15mm (Fifteen into fifteen millimetre) for top & bottom rails, M.S. frame shall have a coat of steel primer of approved make and manufacture M.S. frame covered with 5mm (Five millimetre) thick heat moulded PVC "C" channel of size 30mm (Thirty millimetre) thickness, 70mm (Seventy millimetre) width out of which 50mm (Fifty millimetre) shall be flat and 20mm (Twenty millimetre) shall be tappred in 45 (Forty five ) degree angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetre) wide, PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen) wide PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetre) thick, 20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm ( five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails with 7mm (Seven millimetre) (5mm+2mm) ( five millimetre +two millimetre) thick x15mm (into fifteen millimetre) ) wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An addtional 5mm ( five millimetre) thick PVC strip of 20mm ( twenty millimetre) wide is to be stuck on the interior side of the 'c' Channel using Solvent adhesive etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) thick water proof commercial board Century/ply (ISI marked) in shutters for SDB shutter /cup boards with 6 mm (six millimetre) thick hard wood edging all round and PGI sheet lining in side including fixing with nickel plated piano hinges with screws etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete With float glass panes of 6 mm ( six milimetre) thickness (weight not less than 15.00 kg/ sqm) ( fifteen decimal zero kilogram per square metre) of modi guard/saint gobain as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete, with float glass panes of 5 mm ( Five milimetre) thickness (weight not less than 12.50 kg/sqm ( twelve decimal five zero kilogram per square metre) of modi guard/saint gobain as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket complete, with Frosted Glass 4mm ( four milimetre) thickness (weight not less than 10.00 kg/sqm ( ten kilogram per square metre) as per the architectural drawings and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20 mm ( twenty milimetre) diametre stainless steel curtain rod having wall thickness of 1.25mm (one decimal twenty five milimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetera, wherever necessary complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x16 mm ( three hundred into sixteen milimetres) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete ; as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

200x10mm ( two hundred into ten milimetres) size

150x10mm ( two hundred into ten milimetres) size

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

150mm (one hundred fifty milimetres) size

125mm (One hundred twenty five milimetres) size

Providing and fixing 250mm ( Two hundred fifty millimetre) Aluminium hooks and eyes complete including carriage of material as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS No. 3564, embossed on the body, door weight upto 35 kg ( thirty five kilogram) and door width upto 700 mm ( seven hundred milimetres), with necessary accessories and screws etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. other taxes imposed by the Government.

Providing and fixing aluminium hanging twin rubber floor door stopper ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing the complete box of cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves. Pack side of cup board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply. All the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm ( one millimetre) thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof comercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino including hinges, PTMT handle in wood colour of Prayag Polymers,knob megnatic catcher complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 40mm ( forty milimetres) thick cobble stone of NTC/ Unistone/ Atlantic of M- 30 (M - thirty) grade made by Block making machine with strong vibratory compaction of approved size, design & Shape, laid in required colour and pattern over and including 50mm ( fifty milimetres) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 19 mm ( Nineteen milimetre) thick Cheema Pink Granite single slab with double round nosing /Edging in Treads of steps and single slab in riser of steps as per detail gang saw cut, mirror polished, premoulded and prepolished, machine cut and similar locations of required size of approved shade, colour and texture laid over 20 mm ( twenty milimetre) thick base of cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 600x600 mm ( six hundred into six hundred miliemtre) Double Charged Matt finish vitrified floor tiles of Restile /Johnson/ Nitco/ Rak / Kajaria / AGL / Simpolo / Somany /Orient Bell as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero decimal zero eight percentage) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty milimetre) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 600x600 mm ( six hundred into six hundred milimetre) Double Charged / Ultra charged vitrified floor tiles of Restile/ Johnson/ Nitco/ Rak / Kajaria / AGL / Simpolo / Somany /Orient Bell as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero decimal zero eight percentage) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty milimetre) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per squaremetre) including grouting the joints with white cement and matching pigments etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Precast terrazzo tiles automatic Hydraulic compressed and polished of NTC in Flooring size 30cmx 30Cm x2.5cm ( thirty centimetre into thirty centimetre into two decimal five centimetre) ISI marked No IS: 1237 top layer in (50%) (Fifty Percent) white and 50% (Fifty percent) Grey cement ) in white yellow , green and maroon chips of size 0,B and 2B size of NTC as per approved shade with marble chips of specified sizes laid on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 300x300 mm (three hundred into three hundred millimetre) Antiskid Cermic Tiles of Premimum quality of Nitco/ Rak / Kajaria/ Johnson /AGL / Somany/ Orient Bell in flooring laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) labrador design (Rainbow series ) Tiles of NTC / Unistone / Atlantic in flooring on 20mm (twenty millimetre) average thick (fixed on floor Ramp) with cement Mortar 1:3 (One cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing, cutting and moulding complete, including carriage of materials as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Smooth finishing of the exposed surface of R.C.C. work with 6 mm ( six milimetre) thick cement mortar 1:3 (one Cement isto three fine sand) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 19 mm ( Nineteen milimetres) thick polished Cheema pink Granite with Lakha Red Band / Grey Granite with Black Band as per detail gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window cills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm ( twenty milimetres) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 60mm (sixty millimetre) thick factory made cement concrete interlocking paver block of NTC / Unistone / Atlantic of M -30 ( thirty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm ( fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 40mm( forty milimetre) thick cobble stone of NTC / Unistone / Atlantic in skirting of M -30 (thirty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm ( fifty milimetres) thick compacted bed of coarse sand, filling the joints with fine sand etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) Double Charged matt finish Vitrified tiles of Johnson/ Nitco/ Rak / Kajaria / AGL / Simpolo / Somany /Orient Bell as per approved shade and design of the office (thickness to be specified by the manufacturer), with water absorption less than 0.08% ( zero decimal zero eight percentage) and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm ( six milimetres) thickness, including grouting of joints as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 600x600 mm ( six hundred into six hundred millimetres) Double Charged Vitrified tiles of Johnson/ Nitco/ Rak / Kajaria / AGL / Simpolo / Somany /Orient Bell as per approved shade and design of the office (thickness to be specified by the manufacturer), with water absorption less than 0.08% ( zero decimal zero eight percentage) and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm ( six milimetres) thickness, including grouting of joints as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Precast terrazzo tiles automatic Hydraulic compressed and polished of NTC in skirting 30cmx10cm (Thirty centimetre into ten centimetre) ISI marked No IS: 1237 top layer in (50%) (Fifty Percent) white and 50% (Fifty percent) in white, yellow, dark, green and maroon chips of size 0,B and 2B (NO SG - 403B) size with marble chips of specified sizes laid on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Ceramic Glazed floor tiles of Kajaria /Johnson / Nitco /Orient /Bell / Somany / AGL with one border matching contrast at top size 300x450 mm ( three hundred into four hundred ffity milimetre) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved shade, laid on 20 mm ( twenty millimetre) thick cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per square metres) including grouting the joints with white cement and matching pigments etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Ceramic Glazed floor tiles of Kajaria /Johnson / Nitco /Orient /Bell / Somany / AGL size 300x450 mm ( three hundred into four hundred ffity milimetres) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per square metres) including grouting the joints with white cement and matching pigments etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine/ sail/ Reliance/ Jindal over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet, rubber washers complete with all accessories as required as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing pre-painted steel sheet ridges having proper Gola shape or hips of TATA Durashine/ Sail/ Reliance/ Jindal 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing pre-painted sheet valleys 90cm (Ninety centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA Durashine/ Sail / Reliance/ Jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regulatr modified polyster organic coating of 20 (twenty) mocrons over 5 (Five) microns coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with bolts, nuts and washers etcetera having dome shape gratting including making necessary connections with rain water pipe complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing flashing 38cm (Thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of Tata/sail/Reliance/ Jindal with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter & prepainted G.I. limpet & bitumen washers complete. as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimetre) diametre high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex/Vectus /Relpipe (reliance) working pressure not less than 6 kg/cm2 ( Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Vectus /Relpipe (reliance) including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150mm (one hundred fifty millimetre) dia PVC plain bend

150mm (one hundred fifty millimetre) dia PVC shoe

Providing and fixing unplasticised - PVC pipe clips of Supreme/Finolex/Vectus /Relpipe (reliance) of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement isto 4 coarse sand) and making good the wall etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Structural steel work of Tata / Sail riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ( P- three one six zero - three milimetres ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm ( three hundred milimetres) vertically. The 2nd (second ) coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st (first ) coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimetre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete, as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing stair case railing having hand rail of 50 mm (fifty milimetre) dia SST stainless steel pipe handrail with 35 mm ( thirty five milimetre) diametre sst pipe as per detail in combination of 35 x35mm ( thirty five into thirty five milimetre) SST square pipe and 15 /20 mm ( fifteen/ twenty milimetre) sst baluster in stair case complete in all respect, as per the direction of Engineer in charge, as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing hand rail 50mm Dia. SST hollow pipe handrail slip resistant with round ends at two levels at 75 Cm & 90cm ( seventy five centimetre into ninety centimetre) Ht. welded to 25 cm (twenty five centimetre) dia SSt hollow pipe baluster. It should extend 30cm ( thirty centimetre) beyond the top and bottom of the ramp as per detail of approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint of Asian / Nerolac to give an even shade. (Two or more coat) applied @ 0.90 ltr/ 10 sqm ( zero decimal nine zero litre per ten square metres) over an under coat of primer applied @ 0.80 ltr/ 10 sqm ( zero decimal eight zero litre per ten square metres) of approved brand and manufacture as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Applying priming coat With ready mixed pink or Grey primer of Asian / Nerolac paint on wood work (hard and soft wood) as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of Asian / Nerolac required shade (Two or more coat ) applied @ 0.90 ltr/10 sqm ( zero decimal nine zero litres per ten square metres) over an under coat of primer applied @0.75 ltr/10 sqm ( zero decimal seven five litres per ten square metres ) as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic tile cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding and carriage of material as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and applying 6 mm ( six milimetre) thick cement plaster in ceiling with cement mortar 1 : 3 (1 cement isto 3 fine sand ) as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and fixing 595x595x6 mm (Five hundred ninety five into five hundred ninety five into six millimetre) designer board of everest ( E-Board) ceiling with pre-painted GI channel framing @ 600 mm c/c (Six hundred millimetre centre to centre) complete as per PWD specification, approved drawing, design, including carriage of material, with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of Octroi, Royality, Malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per PWD specification,approved drawing, design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of Octroi, Royality, Malkana, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

20 mm (Twenty milimetres) cement plaster with Groove @ 23 cm C/C ( twenty three centimetre) centre to centre as per pattern/ architectural drawings and design With cement Mortar 1:4 (one cement isto four sand) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying white cement based putty of Birla / JK average thickness 1 mm ( one milimetre) over the plastered wall surface to prepare the surface even and smooth complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Finishing walls with Fine Dune / Dune Finish of NCL Alltek / Spectrum Textured wall finish natural Grit of Heritage of approved shade having VOC less than 50 gm/litre ( fifty grams per litres) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. ( one decimal forty three litres per ten square metres) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm ( zero decimal ninety litres per ten square metres), as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting two or more coats with acrylic washable emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting two or more coats with acrylic emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting two or more coat with premium emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surface, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing plinth protection with 40 mm ( Fourty millimetre) thick interlocking tiles/ cement concrete paver block with 23 cm ( twenty three centimetre) dia half round RCC pipe for drainage purpose laid over 10cm (ten centumetre) thick cement concrete 1:4:8 ( one cement isto four sand isto eight graded/ crushed stone aggregate) in bedding/ haunching complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Making khurras 45x45 cm ( forty five into forty five centimetre) with average minimum thickness of 5 cm ( five centimetres) cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate of 20 mm ( twenty milimetres) nominal size) over P.V.C. sheet 1 m x1 m x 400 ( one into one into four hundred micron) finished with 12 mm ( twelve milimetre) cement plaster 1:3 (one cement isto three coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one ) metre spacing. This includes testing of joints complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

1620 (20mm) twenty millimetre diametre O.D. pipe

2025 (2mm) twenty five millimetre diametre O.D. pipe

Making connection 25 to 40 mm ( twenty five to forty milimetre) nominal bore of G.I. distribution branch with G.I. main by providing and fixing tee, including cutting and threading the pipe etcetera complete ; as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex , Relpipe (Reliance ), Vectus including fixing with approved adhesive etcetera Complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

160mm ( one hundred sixty milimetres) diametres

110mm ( one hundred ten milimetres) diametres

75mm ( Seventy five milimetres) diametres

Providing and fixing PVC. holder bat clamps of ISI marked of Finolex , Relpipe (Reliance ) , Vectus approved design to P.V.C. rain water pipes embedded in cement concrete blocks 10x10x10 cm ( ten into ten into ten centimetres) of cement concrete 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20 mm ( twenty milimetres) nominal size) and cost of cutting holes and making good the walls etcetera as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

110mm ( one hundred ten milimetres) diametres

75mm ( Seventy five milimetres) diametres

Providing and fixing P.V.C. ISI marked of Finolex , Relpipe (Reliance ) , Vectus heal rest Confirming to IS no-14735-99 including filling the joints with approved adhesive. as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

160mm ( one hundred sixty milimetres) diametres

110mm ( one hundred ten milimetres) diametres

Providing and fixing P.V.C. ISI marked of Finolex , Relpipe (Reliance ) , Vectus Collar ISI marked confirming to IS No-14735-99 including fixing with approved adhesive complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

160mm ( one hundred sixty milimetres) diametres

110mm ( one hundred ten milimetres) diametres

75mm ( Seventy five milimetres) diametres

Providing and fixing 75mm (seventy five millimetre ) diametre P.V.C. ISI marked of Finolex , Relpipe (Reliance ) , Vectus cowl IS marked Confirming to IS No-14735-99 including fixing with approved adhesive complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 x 90 mm ( one hundred ten into ninety milimetres) nominal size/diameter P.V.C. floor trap ISI marked of Finolex , Relpipe (Reliance ) , Vectus ISI marked Confirming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etcetera complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 x75 mm ( one hundred ten into seventy five milimetres) nominal size/diameter P.V.C. floor trap ISI marked of Finolex , Relpipe (Reliance ) , Vectus ISI marked Confirming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etc complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm ( five hundred thirty into four hundred ten milimetres) with integral type foot rests with 100 mm ( one hundred milimetres) PVC P or S trap , 10 litre low level P.V.C. Dual flushing cistern of Hindware, Cera, Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) Cube No 20092 Size 61.5 X 34.5 X 40 cm ( sixty one decimal five into thirty four decimal five into forty centimetres) with seat and lid, 10 litre (ten litres) low level PVC china flushing cistern (sleek Plus) having dual flush system Hindware , Cera, Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( forty milimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid each as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) No 20087 (S - 10 ) Size 57 X 35 X 39 cm ( fifty seven into thirty five into thirty nine centimetres) with seat and lid, 10 (ten) litre low level white PVC flushing cistern (sleek Plus) having dual flush system Hindware, Cera, Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( forty milimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid each as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 (ten ) litre low level PVC flushing cistern having dual flush system of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( forty milimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal no 60002 of size 39 x 37.5 x 59 cm ( thrity nine into thirty seven decimal five into fifty nine centimetres) with white PVC automatic flushing cistern of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of two half stall urinals with 5 (five litre P.V.C. automatic flushing cistern each 10188.90 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china Division plate of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details urinal with integral rim longitudinal flush pipe. as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back wash basin Neptune no 10072 size 550x 480 X 860 mm ( five hundred fifty into four hundred eighty into eight hundred sixty milimetres) of Cera / Hindware/Jaquar of star white/snow white shade as shown in drawings as per details with single 15 mm ( fifty milimetres) C.P. brass pillar tap with C.I. brackets, 32 mm ( thirty two milimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back wash basin Garnet no 10080 size 580x 430 mm ( five hundred eighty into four hundred thirty) ( Under counter Basin ) of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm ( Fifteen milimetres) C.P. brass pillar tap with C.I. brackets, 32 mm ( Thrity two milimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back Matrix wash basin 550x 400 mm ( five hundred ffity into four hundred milimetres) of Cera / Hindware / Jaquar of star white/snow white shade as shown in drawing as per detail with single 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm (thirty two milimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details for wash basin completely recessed at the back for the reception of pipes and fittings as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of Diamond / Unik Kitchen sink with drain board 510x1040 mm ( five hundred ten into one thousand forty milimetres) bowl depth 250 mm ( two hundred ffity milimetres) with C.I. brackets and stainless steel plug 40 mm ( forty milimetres), including painting of fittings and brackets, cutting and making good the walls wherever required , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two milimetres) diametres C.P. brass chain and rubber plug of ISI marked is complete for sink or wash basin as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union for wash basin or sink complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty two millimetres) diametres C.P. Brass waste of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal for wash basin and sink complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal for gully floor or Nahni trap as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x450 mm ( six hundred into four hundred fifty milimetres) beveled edge mirror of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass towel rail 600X20 mm ( six hundred into twenty milimetres) of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five milimetres) glass shelf Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty milimetres) long screws, rawl plugs etc., complete. as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass each toilet paper holder of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 8 mm ( eight hundred milimetres) diametres C.P. / S.S. Jet of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal with flexible tube upto 1 (one )metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetres) nominal bore C.P. brass bib cock tap of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of approved quality conforming to IS:8931 as approved by Engineer - in - charge and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetres) nominal bore C.P. brass stop cock (concealed) Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS:8931 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetres) nominal bore C.P. brass pillar tab cock (concealed) of Continental series of Jaquar / Contess series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS:8931 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetres) nominal bore C.P. brass angle valve of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal for basin mixer and geyser points of approved quality conforming to IS:8931 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetres) nominal bore C.P. brass full way valve with wheel, of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen milimetres) nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen milimetres) nominal bore PVC connection with brass union 45cm ( forty five centimetres) length,of Finolex , Relpipe (Reliance ) , Vectus as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32 mm ( thirty two milimetres) dia P.V.C. flexible waste pipe of Finolex , Relpipe (Reliance ) , Vectus for sink or wash basin including P.V.C. waste fittings complete. as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Supreme / Finolex/ Vectus IS : 12701 marked, having 1000 ( one thousand) litres capacity with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing, laying and jointing 150 mm ( one hundred fifty milimetres) diametres PVC pipes class SP-1 of Supreme/ Finolex/ Vectus including testing of joints etc. complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement isto five coarse sand isto ten graded stone aggregate 40 mm ( forty milimetres) nominal size) bedding for P.V.C. pipe of 150 mm ( one hundred fifty milimetres) diametres haunching as per standard design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five coarse sand (zone- III) isto three graded stone aggregate 20 mm ( twenty milimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm ( forty milimetres) nominal size), inside plastering 12 mm ( twelve milimetres) thickness with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm ( forty milimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm ( ninety into eighty milimetres) and 45 cm (forty five centimetres) deep including C.I. cover with frame (light duty) 455x610 mm ( four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg ( twenty three kilogram )and weight of frame 15 kg ( fifteen kilogram) With Sewer bricks conforming to IS : 4885 each 9650.15 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five coarse sand (zone- III) isto three graded stone aggregate 20 mm ( twenty milimetres)nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm ( forty milimetre) nominal size), inside plastering 12 mm ( twelve milimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm ( twenty milimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm ( one hundred twenty centimetres) and 90 cm ( ninety centimetres) deep including C.I. cover with frame (medium duty) 500 mm ( five hundred milimetres) internal diameter, total weight of cover and frame to be not less than 116 kg ( one hundred sixteen kilogram) (weight of cover 58 kg ( fifty eight kilogram) and weight of frame 58 kg ( fifty eight kilogram) ) : With Sewer bricks conforming to IS : 4885 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 455x610 mm ( four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg ( twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram), R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five Fine sand isto three graded stone aggregate 20 mm ( twenty milimetres) nominal size), foundation concrete 1:5:10 (one cement isto fivefine sand isto ten graded stone aggregate 40 mm ( forty milimetres) nominal size), inside plastering 12 mm ( twelve milimetres) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm ( four hundred fifty five into six hundred ten milimetres) and 45 cm ( forty five centimetres) deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven decimal five) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying and fixing 455x610 mm ( four hundred fifty five into six hundred ten milimeters) light duty rectangular C.I. manhole cover with frame the weight of the cover to be not less than 38 kg ( thrity eight kilogram) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto any depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimetres) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated within all leads, lifts and other incidential and as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and Fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cemnet isto four sand isto eight graded crushed/broken stone aggregate 40mm ( forty milimetres) nominal size in P.V.C. pipes of the 110mm internal diametres includng concrete for bedding necessary form work and curng complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 110mm ( one hundred ten millimetre) diametre ( to level or slope) approved adhesive of P.V.C. (D-Plast) sewer pipe of working pressure not less than 4.5 kg/ sqm ( four decimal five kilogram per squaremetre) including filling the joints with approved adhesive complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Provision for water lifiting pump 1.00 (one) H.P. including all necesary fitting as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen milimetres) nominal size bore mild steel tube including fititng as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Navneet Thakur