AMP for the year 2020-21 on Nouru Tikkar Mandal road (VR0103)

Amount

Providing and applying tack coat on bituminous surface using bitumen emulsion at the rate of 0.25 kg. (zero point two five kilogram) per square metre conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom complete as per technical specification including carriage of materials with in all leads, lilfts and other incidentials and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and laying 50 to 100 mm (Fifty to one hundred millimetre) average compacted thickness with bitumen of grade VG-30 at the rate 3.50 % (Three point five zero percent) (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 (One hundred- One hundred twenty) TPH capacity bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons with in all leads lilfts and other incidentials and as per the entire satisfaction and direction of Engineer-in-Charge

2 cm (Two centimetre) premix carpet surfacing with 1.8 (One point eight) cubic metre and 0.90 (Zero point nine zero) cubic metre of stone chippings of 13.2 mm (Thirteen point two millimetre) size and 11.2 mm (Eleven point two millimetre) size respectively per 100 (One hundred) square metre and 52 (Fifty two) Kilogram and 56 (Fifty six) Kilogram of hot bitumen per cum of stone chippings of 13.2 mm (Thirteen point two millimetre) size and 11.2 mm (Eleven point two millimetre) size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 (Six to nine) tonne capacity etc. complete (tack coat to be paid for separately) With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 (Seventy) grams per kilogram of asphalt complete as per technical specification including carriage of materials with in all leads, lilfts and other incidentials and as per the entire satisfaction and direction of Engineer-in-Charge

Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm (Two point three six millimetre) and retained on 180 (One hundred eighty) micron sieve) with bitumen using 128 kg (One hundred twenty eight Kilogram) of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 (Zero point six zero) cubic metre of fine aggregate per 100(One hundred) square metre of road surface, including rolling and finishing with road roller all complete as per technical specification including carriage of materials with in all leads, lilfts and other incidentials and as per the entire satisfaction and direction of Engineer-in-Charge

PAWAN KUMAR

BHUPINDER KUMAR

SUNIL KUMAR