TV PURAM LPS MAINTENANCE

Amount

office room maintenance

OD383293/2024-2025:Providing and fixing Pre-laminated High density fibre board is:14587-1998 marked with both side decorative lamination Grade-1 (exterior grade )in shelves with screws and wherever required, edges to be sealed with PVC edge bending tape 2.00mm thick of approved brand (fitting to be separately )Pre laminated with decorative lamination one grade HDF board 18mm thick confirming .

OD338776/2024-2025:Providing and fixing 10 mm thick frame less toughened glass of approved brand and manufacture, including providing necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge (frame work in stainless to be paid separately)

OD339302/2024-2025:Supplying and fixing window curtains approved brand including PVC gear wheel, gear chain , bracket , screw , plug etc complete

OD339973/2024-2025:Providing and fixing 12 mm thick Normal glass of approved brand and manufacture, including providing necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge (frame work in stainless to be paid separately)

OD339974/2024-2025:ACP -Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a)b) Providing, fabricating and supplying and fixing panels of aluminiumcomposite panel cladding in pan shape in metalic colour of approved shades made out of 4mmthick aluminium composite panel material consisting of 3mm thick FR grade mineral coresandwiched between two Alumini um sheets (each0.5mm thick). using stainless steel screws, nuts, bolts, washers, cleats, weathersilicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MSwith Hot Dip Galvanised with serrations and serrated washers to arrest the wind loadmovement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

OD340382/2024-2025:Providing and fixing 10 mm thick normal glass of approved brand and manufacture, including providing necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge (frame work in stainless to be paid separately)

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface

SANDEEP BAIJU (BID ID -2091529)

Bidder Name

RAJEEV P P

SANDEEP BAIJU