Upgradation of Type II staff quarters in Bharmat Colony Housing Board Colony and Scientist Appartments at CSIR IHBT Palampur

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.: For thickness of tiles 10 mm to 25 mm.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Taking out existing wooden door/aluminium door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

Providing and fixing soil, waste and vent pipes : 100 mm dia: Sand cast iron S&S pipe as per IS: 1729

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet:Sand cast iron S&S as per IS: 3989

Providing and fixing plain bend of required degree.: 100 mm dia: Sand cast iron S&S as per IS - 1729

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints with water pressure Testing Machine complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls- 20mm nominal outer dia pipes and Testing.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.: 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.: 15 mm nominal bore

Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms

Providing and fixing PTMT grating of approved quality and colour.150 mm nominal size square 100 mm diameter of the inner hinged round grating

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brassbrackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long CP towel rail

Providing and fixing brass gate valve of approved quality :20 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China wash basin of size 660x460 mm with single 15 mm C.P. brass siple hole mixer.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing C.P. brass wall mount sink mixer (raised swinging spout) with connecting legs & walls flanges complete in all respects (Jaquar CON-319KN) or equivalent make)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.20 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.15 mm dia nominal bore

Providing and fixing MS Powder coated curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :25 mm dia

Providing and fixing cupboard build-in overall size 1.10x2.00x0.58m deep or part thereof with partitions & shelves as per drg. & design made out of 18 mm thick prelaminated MDF board of approved quality on all sides partitions, shelves & shutters. The back will be covered with 8 mm thick MDF board of approved quality. The two sides & rear sides of the cabinet base shall be covered with UPVC sheet of 3mm thickness to protect the ingress of moisture with necessary fixing arrangements.The edges of the shutters of the cup board and all other exposed edges of the board shall be covered with epoxy paint/matching shade lamination 0.8 mm thick. Each shutter shall be fixed with spring hinges, 100 mm SS handles. The cupboard shall be fixed with Nickel plated powder coated 20mm M.S. curtain rod with Nickel plated brackets. MDF board shall be of approved manufacturerm, ISI marked conforming to IS:14587, Exterior grade with choice lamination on one side and balancing lamination on other side. The front overall area of the cupboard shall be measured for payment.

Providing and fixing overhead kitchen cabinet overall size 1.80x0.75x0.40 mm deep on top and 0.25m deep on bottom (or part thereof). The cabinet is to be fixed with two intermediate partitions. Upper part of the cabinet will be fixed with six no. shutters (0.50m high ). The shutters are to be fixed with 100 mm S.S. handles & spring hinges of approved quality. All exposed edges of the board shall be epoxy painted in matching colour of board. The cabinet is to be made out of prelaminated board, exterior grade ISI marked conforming to IS 14587, with choice lamination on both sides. The cabinet is to be fixed on wall with 100mm M.S. fasteners complete as per design & drg. Front area of cabinet with total height i/c area without shutter shall be measured for payment.

Providing and fixing kitchen cabinet under cooking platform with overall size 1.60x0.65x0.55 with two intermediate vertical partitions to divide cabinets into three equal parts. Each part will be provided with side hung shutters & an inermediate horizontal partition (folding/removable type 0.30m deep). Each shutter will be fixed with two nos. spring hinges & 100 mm S.S. handle of approved make & desing. The cabinet is to be made out of ISI marked conforming to IS 14587 18 mm MDF prelaminated board, exterior grade with choice lamination on sides except on back which shall be 8 mm thick & choice lamination on one side. All exposed edges of the board shall be deco/epoxy painted. The rear side of the Cabinet will be covered with 3mm Thick PVC Sheets. The shutter area shall be measured for payment.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood

Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame sash, and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for R3 and R4 profile conforming to En:12608 in any shape color and design duly reinforced with galvanized mild steel section made of required shape and size as per CPWD specification, UPVC extruded glazing beads interlocks and inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware , SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve fir fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screw etc. Profile of frame , sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specifications & direction of Engineer-in-Charge. setion of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/Glazing of plain/ toughened/Laminated/ double glass unit with/without high performance coating as per design requirements and conforming to IS:16231 shall be paid separately . Note:- Structural design proof checked from a Government engineering institute to be provided by manufacturer for: (i) Stes with Basic wind speed>45m/sec as per IS 875-Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Three track three panels sliding window with two glazed & one wire meh panels with Aluminium channel for roller track, wool pile, nylon rollers with Aluminium channel for roller with SS 304 body . Using R2 series with frame (70mm & above)x (40mm & above) & both powder coated touch locks with hook. (Height upto 1.2 metre)glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (Zamak) .

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame sash, and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for R3 and R4 profile conforming to En:12608 in any shape color and design duly reinforced with galvanized mild steel section made of required shape and size as per CPWD specification, UPVC extruded glazing beads interlocks and inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware , SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve fir fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screw etc. Profile of frame , sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specifications & direction of Engineer-in-Charge. setion of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/Glazing of plain/ toughened/Laminated/ double glass unit with/without high performance coating as per design requirements and conforming to IS:16231 shall be paid separately . Note:- Structural design proof checked from a Government engineering institute to be provided by manufacturer for: (i) Stes with Basic wind speed>45m/sec as per IS 875-Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Fixed window/ventilator withought mullion/transom. Using R1 series with frame (33 mm & above) X(35 mm & above). (Height upto 0.90 metre)

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing to existing door frames25 mm thick PVC flush door shutters made out of a one pieceMulti chamber extruded PVC section of the size of 762 mm X25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :Kiln seasoned and chemically treated hollock wood 50x12 mm.

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm

Providing and fixing stainless steel sliding door bolts, ISI marked, transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm

Providing and fixing stainless steel tower bolts, ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm

Providing and fixing stainless steel tower bolts, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. complete 150x10 mm

Providing and fixing stainless steel hanging floor door stopper, ISI marked, transparent or dyed to required colour and shade, with necessary screws Twin rubber stopper

Providing and fixing bright finished brass helical door spring (superior quality)

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.10 x 160 mm

Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing & fixing glass panes with wooden fillets:Float glass panes of nominal thickness 5 mm (weight not less than 12.5 kg/sqm)

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm)over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

Providing and fixing stainless steel galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of apertur.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Providing and fixing toilet paper holder :C.P. brass

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter

Providing and fixing stainless steel ( Grade 304 ) railing made of Hollow tubes, channels,plates etc. Including welding, grinding, buffing, pollishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete . I/Cfixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-Incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fastners etc.).

Dismentling steel work in built up sections in angles, tees, flats, and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. Including dismembering and stacking within 50 meters lead.

Dismentling and buyback of dismentled old CP brass tap, angle valve & pillar cock etc. The actual weight of dismentle item at site will be paid.

Deduct for buy back of existing MS angle, square bars, MS flat, tee etc.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as required. i) Group A

Wiring for twin control light point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box & earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. i) 2x2.5 sqmm + 1x2.5 sqmm earth wire

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. i) 2x4sqmm + 1x4 sqmm earth wire

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. i) 4x2.5 sqmm + 2x2.5 sqmm earth wire

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. i) 4x4 sqmm + 2x4 sqmm earth wire

Wiring for circuit/ submain wiring alongwith earthwire with the following size of FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit as required. i) 2x10sqmm + 1x10 sqmm earth wire

Supplying and drawing following sizes of FRLS PVC insulatted copper conductor single core cable in existing surface/recessed PVC Conduit as required. i)1x1.5 sqmm

Supplying & drawing co axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying & fixing of following sizes of ISI medium class PVC conduit alongwith accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. i) 25 mm

Supplying & fixing of following MODULAR SWITCH/ SOCKET ON THE EXISTING MODULAR PLATE & SWITCH BOX INCLUDING CONNECTIONS BUT EXCLUDING MODULAR PLATE ETC AS REQUIRED. i) 5/6 A Switch

Supplying & fixing of following MODULAR SWITCH/ SOCKET ON THE EXISTING MODULAR PLATE & SWITCH BOX INCLUDING CONNECTIONS BUT EXCLUDING MODULAR PLATE ETC AS REQUIRED. i) 2 way 5/6 A Switch

Supplying & fixing of following MODULAR SWITCH/ SOCKET ON THE EXISTING MODULAR PLATE & SWITCH BOX INCLUDING CONNECTIONS BUT EXCLUDING MODULAR PLATE ETC AS REQUIRED. i) 3 pin 5/6A Socket outlet

Supplying & fixing of following MODULAR SWITCH/ SOCKET ON THE EXISTING MODULAR PLATE & SWITCH BOX INCLUDING CONNECTIONS BUT EXCLUDING MODULAR PLATE ETC AS REQUIRED. i) Bell Push

Supplying & fixing 2 Module Stepped type Electronic Fan Regulator on existing Modular Plate Switch box including connection but excluding modular plate extra as required. (Modular Accessories Make: Anchor Roma/ Havells Crabtree/ Wipro North West )

Supplying & fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying & fixing following size/ module, GI/PVC Box alongwith modular base & cover plate for modular switches in recess etc as required. i) 1 or 2 Module ( 75mm x 75mm)

Supplying & fixing following size/ module, GI/PVC Box alongwith modular base & cover plate for modular switches in recess etc as required. i) 4 Module ( 125mm x 75mm)

Supplying & fixing following size/ module, GI/PVC Box alongwith modular base & cover plate for modular switches in recess etc as required. i) 8 Module ( 125mm x 125mm)

Supplying & fixing following size/ module, GI/PVC Box alongwith modular base & cover plate for modular switches in recess etc as required. i) 12 Module ( 200mm x 150mm)

Supplying & fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing & fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying & fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing & fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box including connection etc. as required

Supplying & fixing call bell with Ding Dong sound suitable for single phase, 230 volts, complete as required

Installation, testing and commissioning of pre wired, fluorescent fitting/ compact fluorescent fitting/ LED fitting of all types, complete with all accessories and tube/ lamp etc. directly on ceiling/ wall, inc connection with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable, including providing & fixing phenolic laminated sheet cover on the fan box etc. as required.

Numbering of ceiling fan/ exhaust fan/fluorescent/ LED fitting as required

Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed steel/ PVC conduit as required. (Make:- Digilink or equivalent). i) 1 run of cable

Supplying & fixing suitable size GI box with Modular Plate & cover in front on surface or in recess including providing & fixing 02 no 3 pin 5/6 A modular socket outlet and 02 no 5/6 A modular switch including connection etc as required.

Supplying & fixing suitable size GI box with Modular Plate & cover in front on surface or in recess including providing & fixing 25 amp. Modular socket outlet & 25 Amp. Modular SP MCB 'C' Curve including connection, painting etc as required.

Suppying and fixing PVC batten/ angle holder including connection etc. as required.

Supplying and fixing following way, single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator). i) 12 way, double door

Supplying and fixing 5 amps to 32 amp. rating, 240/415 volts, 10 ka, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i) Single pole

Supplying and fixing 5 amps to 32 amp. rating, 240/415 volts, 10 ka, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. i) Single pole and neutral

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and refilling as required.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ Metal/HDPE pipe as required. i) Upto 35 sq.mm

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excation and refilling etc as required. i) Above 6.5 metre and upto 8.0 metre

Providing and making steel pole collar with cement concrete (1 cement: 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc. as required. (volume of pole/ pipe not to be deducted).

Supplying & laying of following size DWC HDPE Pipe (ISI marked) along with all accessories like socket, bend, coupler etc. confirming to IS 14930, Part 2 complete with fitting and cutting, jointing etc. direct in ground ( 75 cm below ground level) including excavation & refiiling the trench but excluding sand cushioning and protective covering etc complete as required. i) 63 mm Dia (OD- 63 mm & ID-51 mm nominal).

Brush less current (BLDC) Motor Supply, Installation,Testing and Commissioning of Ceiling Fan with Brush Less Direct Current (BLDC) motor, class of Insulation : B,3 nos metal (Aluminium alloy) blades, 37 cm longdownroad, 2 nos ccanopies, shackle kit safety rope, copper winding, steel/AI body Power Factor not less than 0.9, Service Value (CM/M/W) Minimum as below, RPM (Tolerance as per IS: 374-2019) THD (Total Harmonic Destortion) Less than 10% , remote (preferably mobile APP) for peed control and all remaining accessories including safety pin, nut bolts, washers,temperature rise= 75 deg C (max.), insulation resistance more than 2 Mega ohm, suitable for 230 V, 50Hz, single phase AC Ceiling Fan complaint to IS 374: 2019 fan Supply, Earthing etc. complete as req 1200 mm, service value> CM/Min/Watt, air Delivery 210 CM/Min Each.

Supplying of surface mounted LED 15w slim round downlighter, 6000k with die cast aluminium construction complete as required.

Supplying of LED Linear lamp 18/20 Watt with aluminium housing for optimum light output & having specially designed diffuser to avoid direct view of LED.

Supplying of Powder coated LED channel for LED Linear lamp 18/20 Watt.

Supplying of MS Powder Coated White in colour, Fixed wall Bracket Luminaire with Frosted Glass cover having B-22 Holder complete with 12 Watt LED Lamp complete as required.

Supplying of LED Batten 10 Watt made up of Powder coated Aluminium housing with Glare free light output complete as required.

Supplying of LED bulk head luminaire 10 Watt made up of MS Powder coated housing with Glare free light output complete as required.

Supplying & fixing Single Phase, 230 volts, 1400 RPM, Metal body exhaust fan / ventilating fan , size 225/ 230 mm sweep complete with louvers as required.

Supplying & fixing of Single Phase, 230 volts, Plastic body, auto shutter exhaust fan/ ventilating fan size 200 mm complete as required.

Supply & testing 2 core 10sqmm aluminium service wire from pole to electrical meter as required.

SITC of 15 Watt All in One integrated LED Solar street Light with PIR Sensor & MPPT Charge controller , Pole Mounted, Extruded Aluminium housing having minimum lighting System efficiency up to 120 lm/w.

Supply & installation of 6.0 Meter Octagonal Pole, Number of segment-1, BOTTOM (O.A.F) 130 MM, TOP (O.A.F) 70MM, BASE PLATE & FOUNDATION : SIZE OF BASE PLATE 220 SQ, Thickness of base plate 12 MM, HOLE P.C.D 200, HOLE DIA(SLOT) 22X38,FDN BOLT DIA M20, FDN BOLT TOTAL LENGTH 600 MM, NO. OF FDN. BOLT 4N.

Supplying & testing of Aluminium conductor, armoured, PVC insulated & PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes as required. i) 4.0 core 10 sqmm Armoured cable

Supplying & fixing of high performance LED 25W roadway luminaire, housing made up of die cast aluminium, with street optic lens, for uniform light distribution. rated IP66. complete as required.

Supplying & fixing of high performance LED 45W roadway luminaire, housing made up of die cast aluminium, with street optic lens, for uniform light distribution. rated IP66. complete as required.

Supplying & installation of FRP/SMC street light terminal box, Size: (250 x 200 x 105) mm with IP 55 Protection & 4 Way Terminals with Bus Bar link, one no. 6 amp. Single Pole MCB including front lockable cover complete as required.

Supplying of Steel Tubular Pole (Swaged Type) 8.0 Mtr. Long with MS plate welded at bottom including wiring the pole, Painting one coat of red oxide and two coat of Aluminium paint as required. Pole confirming to IS 2713-1980 , Pole Designation 410 SP-10.inc. Item includes S/F suitable size GI Bracket for mounting 01 No. LED Street light luminaire on top of pole. ( Note : LED Street light luminaire does not included in the Item).

Supplying & fixing of timelite Distribution Board, 40 amp, 3 pole/230v with Astronomical time switch complete as required.

Supplying & fixing MS Tubular Pole 65 mm dia as per IS2713,1980 inc wiring the pole with 2x1.5 sqmm FRLS Copper wire. Pole is of 3.5 Mtr Length with 3.6 mm thickness, Suitable MS Plate welded at bottom, having 25 mm dia hole at centre. Painting one coat of red oxide and two coat of black paint complte as required.

Supplying & fixing integral pole mounted decorative 35/40 Watt LED Post Top Lantern with decorative clear opal acrylic diffuser and IP 65 protection.

Supplying & laying/ drawing of Cat6 Armoured cable in ISI marked HDPE pipe 40 mm with minimum 2.3 mm wall thickness of PE 80 Grade as required (Make:- Digilink or equivalent).

Supllying, Installation, testing and commissioning of 24 port web managed 24 Port 10/100/1000 Mbps Switch with 4 SFP Ports.

Supllying, Installation, testing and commissioning of 6U Wall Mount Rack with accessories,(Cable Manager, Patch Panel, Power Distribution, Mounting Hardware) make: Comrack or equivalent

SITC of RJ 45 computer Socket Cat 6 (I/O Box complete kit).

Please Enable Macros to View BoQ information