PROVN OF WATER SUPPLY SCHEME AT NELONG

Amount

Total amount of Sch 'A' Part I A (Building Work) (For details see Sch 'A' Part-I A in PDF folder)

SCHEDULE 'A' PART-I B (Building Work)

Design and Construction of RCC UG Sump of Capacity 200000 Litres complete all as specified and as shown on site plan.

Design and Construction of RCC water Collection Chamber of Capacity 5000 Litres complete all as specified and as shown on site plan.

Design and Construction of RCC Sedimentation Tank of Capacity 25000 Litres complete all as specified and as shown on site plan.

Design and Construction of RCC Filter bed of 200000 litre per day capacity complete all as specified and as shown on site plan.

Design and Construction of RCC UG Sump of Capacity 25000 Litres complete all as specified and as shown on site plan.

Total amount of Sch 'A' Part II A (Internal Water Supply) (For details see Sch 'A' Part-II A in PDF folder)

SCHEDULE 'A' PART-II B (INTER WATER SUPPLY)

S & F for brass chromium plated, angle valve, fancy type, 15mm dia complete all as specified and directed.

S & F for brass chromium plated shower rose 150 mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and directed.

Total amount of Sch 'A' Part III -A (INTERNAL ELECTRIFICATION) (For details see Sch 'A' in PDF folder)

SCHEDULE 'A' PART III-B (INTERNAL ELECTRIFICATION)

Material and labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes 1.6 mm thick 65 mm depth with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complee all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent compete all as specified and directed: Note: Switches and sockets to be measured and paid for seperatly with respective items.

Material and labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS-H cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes 1.6 mm thick 65 mm depth with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS-H cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- Note: Switches and sockets to be measured and paid for seperatly with respective items.

(a) One light point controlled by one 5/6 amps one way switch

(b) One exhaust fan point controlled by one 5/6 amps one way switch

(c) One Socket outlet, three/five pin, 5 Amp, independent controlled by by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin.

(d) One Socket outlet, three/five pin, 5 Amp, controlled by by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin. on the same board with other switches, sockets, fan regulators etc.

Supply and fixing Lamp holder / Batten holder with PVC/Polycarbonate body angular/straight fixed on plastic laminated sheet cover round shape 3 mm thick including LED bulb 9 watt include connection complete all as specified and directed. (Make - C & S, Cat ref. CHANDRA 9W/W/B22 / Wipro - cat ref No - 9W 6500 K N90051,B22 / Havells, Cat ref. LED ADORE 9W B22 WW)

Supply and fixing LED surface and wall mounted LED batten, extryded aluminium housing provided for efficient heat dissipation with polycorbonate diffuser & integrated driver with industrial grade heavy duty driver having THD<10% suitable for 4' long T8 20W including tube rod (Double side connection) ultra glass LED tube light with very high efficiency sitable for installation in existing T8 fitting with G13 lamp holder, high lumen output, PF>0.98, neutral white 20 W 4 ft light fitting with lamp etc. complete with all light accessories in and including connecting up with twin core twisted flexible copper conductor cable with syitable size copper wire complete all as specified and directed. (Make - Havells, Cat ref. LHEXACP7IN1J020, Crompton, Cat ref. LCTLN-20 CDL / Wipro, Cat ref. LL20-221-XXX-65NE3)

Supply, fixing, connecting and testing building security light fitting LED 36/40 W with pressure die cast aluminium housing, heat resistant toughned glass, IP 66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device, better potics for uniform distrubusion compete with electronic driver, including connecting up with three core copper conductor cable with 1.5 sqmm size copper wire from ceiling rose to connector of light fitting complete all as specified and directed. (Make - Cat ref. LTESST36WLED/LS / Havells, Cat ref. ENDURACITYLITEPLATPLUSSL35WLEO757SASYBOPC / CG cat ref No - LSTS-36-CDL-M / Wipro cat ref No - LR03-501-XXX-57/Philips BRP052 LED 036 CW HP SLA FG S1 PSU GR)

Material and labour for fabrication & fixing of GI pipe 'light' grade wall mounting bracket of size 40 mm dia. and 1.50 mtr long fixed to wall with suitable size of nuts, bolts and GI clamps of size 50 x 5 mm as required including fixing of building security light fitting of any watt / any make compleie all as specccified and directed.

Supply, fixing , connecting and testing exhaust fan, energy saving, 3 star rated complete without regulator 230 volts single phase 300 mm sweep metallic body energy saving fan including louvers, shutters, brackets etc. complete accessories including providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall and connecting with and including PVC insulated three core 23/0.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No with black synthatic enamel paint 2.0 cm high complete all as specified and directed. (Make - Havells Ventil Air DS / Orient 300 mm air flow / Crompton Greaves drifttair 3 blade exhaust fan)

Material and labour for distribution board double door, for mounting MCBs / isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be single door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 42 protection class for the followings DB SPN 8 Way (with 200 amps rated busbar double door) 240V complete all as specified and directed.

Material and labour for distribution board double door, for mounting MCBs / isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be single door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 42 protection class for the followings DB SPN 4 Way (with 200 amps rated busbar double door) 240V complete all as specified and directed.

Supply and fixed MCB SPN , 240 volt, 32 Amp, rating confirming to IS complete all as specified for following ratings complete all as specified and directed.

Supplied and fixed MCB 6 to 32 Amps, 240 Volt single pole, breaking capacity 10KA with "B" Characteristic complete all as specified for following ratings complete all as specified and directed.

Supply and fixing blanking plate complete all as specified and directed complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode size 600 x 600 x 6.0 mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm dia connected to main earth wire on pole or control board and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. Note: The unit rate includes for protection pipe and GI earth wire 4.0 mm dia from top of earth plate up to 7.5 meter above ground level.

Total amount of Sch 'A' Part IV (Earth work and site clearance) (For details see Sch 'A' in PDF folder)

Total amount of Sch 'A' Part V 'A' (Path) (For details see Sch 'A' in PDF folder)

SCHEDULE 'A' PART V-B (Path)

M & L for chequered cement concrete tiles of size 30cm x 30 cm x 25 mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 15 mm thick 1:6 skid bed or bedding layer complete all as specified and directed.

Total amount of Sch 'A' Part VI (Retaining Wall) (For details see Sch 'A' in PDF folder)

Total amount of Sch 'A' Part VII (Area Drainage) (For details see Sch 'A' in PDF folder)

Total amount of Sch 'A' Part VIII A (Sewage Disposal) (For details see Sch 'A' in PDF folder)

SCHEDULE 'A' PART VIII-B (Sewage Disposal)

M & L for Construction of septic tank 20 users capacity with excavation and earth work in hard / dense soil, PCC 1:2:4 type B2 in foundation, brick work in CM 1:4, RCC M-25 using 20 mm graded crushed aggregate as specified, duly reinforced with 8mm TMT bar @ 120mm c/c manhole covers, angle iron frame, vent shaft and sludge chamber etc. complete all as specified, directed and shown on drawing No TD - 217 sheet 1/7 to 7/7.

M&L for soakage well with size 1.8m dia x 3.0 m effective depth including excavation in hard / dense soil, foundation in PCC 1:3:6, walls of honeycombed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in Cement mortar, RCC cover slab in M-25, interconnecting pipes of RCC complete filled with brick bats complete all as specified and directed.and shown on drawing No TD -309 sheet 1/4 to 4/4.

Total amount of Sch 'A' Part IX 'A' (External Water Supply) (For details see Sch 'A' in PDF folder)

SCHEDULE 'A' PART IX-B (External Water Supply)

Construction of valves pit chamber having internal dismention 900 mm x 900 mm x 900 mm (internal height) using PCC (1:4:8)40 mm graded stone aggregate for foundation 15 cms thick, 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement mortar PCC (1:2:4) type B1 coping with 20mm graded aggregate for grouting MS frame including 6 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame made out of 60 x 60 x 6 mm thick angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers finishing coal including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as specified and including demoletion/ dismentling of existing valve chamber complete all as specified and directed.

Construction of valves pit chamber having internal dismention 450 mm x 450 mm x 450 mm (internal height) using PCC (1:4:8)40 mm graded stone aggregate for foundation 15 cms thick, 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement mortar PCC (1:2:4) type B1 coping with 20mm graded aggregate for grouting MS frame including 6 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame made out of 60 x 60 x 6 mm thick angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers finishing coal including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as specified and including demoletion/ dismentling of existing valve chamber complete all as specified and directed.

Supply and fixing air release valve with two air outlet, 100mm dia bore all as specified and as directed. Make : Leader/L&T/Kirloskar/BIR

Supply and fixing air release valve with two air outlet, 80mm dia bore complete all as specified and as directed. Make : Leader/L&T/Kirloskar /BIR

Supply and fixing air release valve with two air outlet, 50mm diacomplete all as specified and as directed. Make : Leader/L&T/Kirloskar/BIR

Supply and fixing foot valve 80mm dia complete all as specified and as directed. Make : Leader/L&T/Kirloskar/BIR

Supply, install, test and commissionning altoch dosing system (Model ADS-1) without decrin dosing pump consiting 40 ltrs to 100 ltrs HDPE or FRP tank with level gauge alongwith agitator with shaft and blade in plastic mounted tank. Lid will have porthole for pouring of altoch and water and necessary decrin dosing pump on the wall at water supply installations complete all as specified and as directed. Make:- Ramco / Aquafit / Milton Ray

Supply, install, test and commissioning decrin dosing pump Model 96 NGQ51 high pressure single head gear motor, adjustable dosing pump with accessories and suitable electrical connections of following specifiations adjustable high pressure 0 to 100 PSI, power 230V, 50 Hz, RPM-44, out put : 2 US.GPD to 40 US GsPD at water supply installations complete all as specified and as directed. Make:- Ramco / Aquafit / Milton Ray

Supply installation , testing and commisioning of Pumping sets, centrifugal, electric driven of capacity 5 HP (3.7 KW), three phase , 415Volts , 20 mtr head , discharge 416 LPM, Pipe size (Suction and delivery) 80 mm x 80 mm , IP 55, maximum ambient temp 40 degree centigrate, pump shaft - Stainless steel ,impeller- Stainless steel including PCC foundation of suitable size as recommended by manufacturer complete all as specified and as directed. Make : Kirloskar/Crompton/Jyoti

S & F GI water tubing medium grade ISI marked with all fittings (including flange of both ends) and accessories including welded where necessary laid in trenches / wall / grounds / floors required for completion of work all as specified and directed for following sizes :-

(a) 100 mm dia

(b) 80 mm dia

(c) 50 mm dia

S & F of Cast Steel ball valves SCR (Forged) ISI marked with iron wheel head screwed both end for GI tubing complete with all fitting all as specified and directed for following sizes :-

(a) 40 mm dia

(b) 25 mm dia

(c) 20 mm dia

S & F Cast Iron Non Return Sluice Valve 80 mm dia complete with all fitting all as specified and directed.

Total amount of Sch 'A' Part X 'A' (External Electric Supply) (For details see Sch 'A' in PDF folder)

SCHEDULE 'A' PART X-B (External Electric Supply)

Supply installation testing and commissioning of Silent type Diesel Engine Generating set 415 volts 10 KVA, 3 phase 0.8 power factor, 50 Hz,developing 200 BHP @ 1500 RPM ,self exicited , self regulated brushless AC generator including AMF panel, suitable for ambient condition at Joshimath and confirming to condition under ISO 3046, IS 10002, BS 5514/5000 with capacity of 10% overloading for one hour in every twelve hour duration and including the following accessories :- Make : Kirloskar /Cummins/cater pillar Contd/.....

(A) Alternator :- Synchronous alternator rated at 10 KVA suitable for continuous operation at 1500 RPM generating 415 volts at 0.8 p. f (lag) suitable for 50 Hz, three phase, 4 wire system. The alternator shall be brushless,single bearing,self excited & self regulated with an AVR .The alternator will be suitable for tropical climate and shall generally confirm to IS: 4722 : 2001 The salient features of the alternators are :- (a) +-1% voltage regulation (max) in static conditions. (b) IP: 23 protections with class ‘H’ insulation. · (c) Permanent lubricating bearing. · (d) Permissible overload of 10% for one hour in 12 hours of operation. Contd/.....

(B) Diesel Engine: - Adquate capacity of Diesel engine liquid cooled to drive independently above alternator and after considering de-rating as per site conditions after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant IS/BS complete with standard accessories all as specified and required for safe handling and operation. Salient features of accessories shall be as under :- i) Fly wheel with housing ii) Cooling system :- Moulded radiator with fan & belts. iii) Cooling Liquid pump : - Centrifugal type belt driven. iv) Exhaust System :- Exhaust System complete with exhaust piping of suitable dia with MS pipe medium grade, Silencer : Residential type Contd/.....

v) Fuel System :- Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by governer electric operated/ (as recommended by OEM) for 1% speed /frequecy regulation.,Fuel filters, Fuel hoses vi) Lub oil System :- Lubricating oil filter,Lubricating oil pump vii) Air Intake System :- Air intake Manifold,Air cleaner dry type viii) Governer : Electronic type ix) Starting System :- Electric Self starter , including battery charging alternator 12 Volts DC. x) Batteries :- Batteries maintenance free of capacity 12 V, 150 AH- 01 No complete with copper conductor multistranded leads of suitable length from self starter to the battary terminals complete with initial charge and initial fill of electrolyte all as specified. Contd/.....

xi) Generator Monitoring Panel : - Comprising of all standard items as per standard manufacturing, iginiton key switch and start / stop arrangement, indications for Engine parametes, hour run meter, RPM meter, Engine oil pressure indicator, coolant temperature indicator, Battery volt display. xii) Safety Controls : - Engine low lube oil pressure, high coolant temperature and over speeding of engine. xiii) Coupling arrngement : - Flexible coupling xiv) Accessories :- AVM Pads built- in or separtely mounted to manufactrer base frames. xv) Base Frame : - Base frame is fabricated either in ISMC or in sheet metal.The base frame is rugged in construction and designed for mounting Diesel engine and alternator close coupled, with cross members mounted on AVM. The base frame shall have provision for mounting of acoustic enclosure & control panel on it and lifting hook for complete set i.e. along with canopy, engine and alternator. xvi) MS/Steel flexible pipe line to and from the fuel tank to the DG Set. xvii) Battery Charger shall be provided as per manufacturer guidelines. xviii) 1 No battery of 12 V in charged condition with its leads. Contd/.....

C) ACOUSTIC ENCLOSURE : Acoustic enclosure shall be powder coated and fabricated out of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type construction. Powder coating is done after seven-tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE-RETARDANT foam as acoustic material & Rock wool for hot zone.Adequate hinged doors shall be provided to canopy, one door shall have glass window for control panel visibility. (i) Manufactured by OEM suitable for 10 KVA DG Set. (ii) It Should be as per latest rules and regulations of Ministry of Environment and Forest and Pollution control board. (iii) The generating set battery should be inside the enclosure. (iv) Fuel tank :-Daily service fuel tank of 8 hours of continuous operation, fabricated form 14/16 SWG sheet metal complete with drain, inlet and outlet connection and fuel gauge. Contd/.....

(v) Construction Details/specification are as follows : - (a) Outer body :- CRCA Sheet of 1.6mm thick. (b) Doors :- CRCA sheet of 1.6 mm thick. (c) Sound Insulation :- 100 mm thick rock wool (minimum density 64kg/Cum)/ fire resistance foam/puff as per OEM/ as per standard manufacturing to achieve desired decibel level. vi) The acoustic should be composite in construction and fully assembled integral unit. vii) The DG Set should be provided with external Emergency stop push button. viii) The enclosure should be suitably internally illuminated by LED Lamp fittings. ix) The noise level should be < 75 dB at 1m under free field conditions. x) The acoustic enclosure parts shall be of powder coated after pre treatment process. The base frame should be painted with epoxy based black shade. Contd/.....

D) Control Panel :- Control panel shall be fabricated from 16/14 SWG sheet and powder coated after seven tank treatment process: (i) Microprocessor based generator set monitoring and control system consists of LCD display and to monitor operator interface, fault history, alternator data, Engine data, porvision for service adjustement and caliberation of DG control functions, Engine controls, engine protective functions, alternator protective functions etc. (ii) Instrument fuses and control wiring. (iii) Indication lamps set for running and load on. (iv) Bus bar including suitable capacity of MCCB, including CTs, cable etc. Contd/.....

E) AMF Panel :- Automatic Mains Failure (AMF) Panel made of CRCA sheet 2 mm thick including necessary arrangement to Install, Testing and Commissioning complete all as per OEM recommendation. Contd/.....

F) Civil Works :- All civil works including PCC (1:3:6) platform with a height of 60 cm above ground level and upto a width of 60 cm both sides of DG Set for easy operation of operator and necessary maint work and related foundations for panel and equipments including making good of distrubed area during installation and commissioning of genset . The depth and size of the foundation and PCC as recommended by the manufacturer. Note:- The contractor shall arrange artificial load resistive for testing of DG Set at site and the cost is deemed to be included in the quoted rates. Contd/.....

Note :- (i) The complete DG Set shall be procured from authorised OEM of the manufacturer of engine. A certificate in this connection shall be submitted to the GE. (ii) Circulation system to achieve desired inside temperature of acoustic enclosure, if required shall be provided as per OEM recommendation. (iii) The quoted rate shall be deemed to be inclusive of 12 hours test run at site as specified in PS and IS requirements in presence E/M Offr detailed by accepting officer, all testing arrangements/ equipments shall be made available by the contractor for tests. (iv) The quoted rate shall be deemed to be inclusive of first fill of lubricant oil, DHPP for 12 hours testing and final successful acceptance test. Contd/.....

(v) Anything missed out above but technically required for efficient working of DG Set is deemed to be included in quoted rates. vi) Design / drawing of the AMF panel & DG SET showing the dimensions is to be obtained from DG SET/ panel board manufacturer / supplier & is to be got approved from Engr-in-charge/GE before placing final order to the manufacturer. vii) The electrical connection of digital Multi Functional Meter in the AMF panel is to be done from load side so that monitoring of various parameters viz. Voltage, Current, KW, KVA, power factor, frequency etc can be done of both SEB mains & DG mains. viii)The quoted rate shall be deemed to be inclusive of first fill of engine oil & final successful acceptance test. ix) The quoted rate shall be deemed to be inclclusive one set of all types of filters , complete set of Maint tools & fuel refilling pump for filling fuel to DG set .

Supply and lowering PVC insulated sheathed 3 core flat submersible cable with copper conductor 6.0 sq mm 1100 volt grade including cable clips for fixing etc complete all as specified and directed by Engineer in charge.

Supply and fixing of street light fitting 60 watt LED, 230V AC outdoor type with high pressure die cast alluminum hosing and heat resistant complete with dirver , lamp bracket with impact and corrosion resistant including thermal managment in multiple optics complete with IP 65 protection complete all as specified and directed. Make:- Havells/ Crompton/ C&S/Bajaj Note :-Rates quated by contractor are deemed to be inclusive of 3 core cable pvc insulated unsheathed copper multistranded conductor ISI marked from MCB box to street light all as specified.

Supply and fixing steel tubular pole 9 Mtrs long type 410 SP- 31 ISI marked final taper plug, bolts, nuts & screws including painting of pole with two pole of Aluminium paint over a coat of red oxide primer including 30 cm alternate step of black and yellow paint up to height of 1.5 Mtrs from top of PCC coping complete with base plate of MS sheet 30 cm x 30 cm x 6 mm thick welded at the bottom of pole all as specified and directed. Make : Nationnal tubing Co kanpur/Bharat Conduit/Jindal

Supply and fix bracket for fixing street light fitting made out of GI pipe medium grade 32 mm 1.5 M long, incl 2 core 4 sqmm PVC cable aluminium conductor from gear / control box to fitting through PVC conduit and along with necessary MS clamps, nuts, bolts, and washers etc complete all as specified and directed.

Supply and fix security light termination box, weather proof, along with connector for 3 phases and MCB sp - 6 amps incl 4 aluminium strip bus bar mounted on insulator of size 200 x 250 x 150 mm complete all as specified and directed.

M&L for earthing complete with galvanished steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and including using galvanised iron strip 32X6mm as earthing leadby means of bolts ,nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade ,wire mesh and lugs ,GI protection pipe of 15 mm bore light grade up to 7.5 mtr long ,etc complete all as specified and directed.

Total amount of Sch 'A' Part XI (Staging Including Water Tank) (For details see Sch 'A' in PDF folder)

Note : Tenderers may note that amount of credit Rs 1,43,000.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Kum Kum construction co.