Construction of Community Center at Gua Ore Mines, Jharkhand

ABSTRACT OF COST

Name of the work: Constrcution of Community Center for SAIL,GUA ORE MINES

S.H. No. Description of Sub-Head DSR Amount (Rs) NS Amount (Rs)

1 Civil Finshing Works : 2,98,44,940 55,19,940

2 External works 1,24,12,918

3 Plumbing Works : 9,49,733 8,51,678

4 Fire fighting Works : 2,76,012 47,580

5 Electrical Works : 27,69,191 17,58,783

After adding cost index @ 10% as per CPWD

office memorandum 34(1)/cost index/ Included in BOQ

ADG(patna)/ 2024/621(H) dated 25.07.2024

Modified Estimated Cost after using Correction

Included in BOQ

factor on DSR 2023 on account of GST @0.973 -

W TOTAL ESTIMATED COST: 5,44,30,775

Digitally signed by PRIYA

ABSTRACT OF COST

Name of the work : Constrcution of Community Center for SAIL, Gua Ore Mines

Sl. No. Description of Sub-Head DSR Amount (Rs) Non DSR Amount

A. Internal Civil Works

1 Earth Work : 1422675.00

2 Concrete Work : 1404104.00

3 Reinforced Cement Concrete : 5407400.00

4 Masonry Work : 2225939.00

5 Cladding Work : 553652.00

6 Wood and P.V.C. Work : 708147.00

7 Steel Work : 9202873.00

8 Flooring : 3460076.00

10 Finishing : 1617989.00

11 Aluminium Work : 347757.00

12 New Technologies and Materials : 81642.00

13 Non Schedule Items 5519940.40

B. External Civil Works

1 Earthwork 1902722.00

2 Concrete Work 1088209.00

3 RCC Concreting Works 5736148.00

4 Masonary works 440159.00

5 Steel works 957185.00

6 Finishing works 244831.00

7 Road Works 1405418.00

8 Precast Boundary works 638246.00

Digitally signed by PRIYA

Name of the work : Constrcution of Community Center for SAIL, Gua Ore

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Earth Work

2.6 Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30cm in depth, 1.5m in width as well as

10 sqm on plan) including getting out and disposal

of excavated earth, lead up to 50m and lift up to

1.5m,as directed by Engineer-in-Charge.

2.7 Earth work in excavation by mechanical means -

(Hydraulic excavator) / manual means over areas

(exceeding 30 cm in depth, 1.5m in width as well as

10 sqm on plan) including getting out and disposal

of excavated earth, lead up to 50 m and lift up to

1.5m, as directed by Engineer-in-Charge.

3 2.25 Filling available excavated earth (excluding rock) in 425.00 Cum 209.78 89156.00

trenches, plinth, sides of foundations etc. in layers

not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up

to 50 m and lift up to 1.5 m.

4 2.25A Excavating, supplying and filling of local earth 250.00 Cum 749.75 187436.00

(including royalty) by mechanical transport up to a

lead of 5 km, also including ramming and watering

of the earth in layers not exceeding 20 cm in

trenches, plinth, sides of foundation etc., complete.

2.26 Extra for every additional lift of 1.5 m or part -

thereof in excavation /banking excavated or stacked

6 2.26.2 Ordinary or hard rock. 15.00 Cum 243.39 3651.00

7 2.27 Supplying and filling in plinth with sand under 185.00 Cum 2,273.05 420514.00

floors, including watering, ramming, consolidating

and dressing complete.

2.34 Supplying chemical emulsion in sealed containers -

including delivery as specified.

8 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 500.00 Ltr 251.25 125626.00

2.35 Diluting and injecting chemical emulsion for PRE -

CONSTRUCTIONAL anti- termite treatment

(excluding the cost of chemical emulsion) :

2.35.3 Treatment of soil under existing floors using -

chemical emulsion @ one litre per hole, 300 mm

apart including drilling 12 mm diameter holes and

plugging with cement mortar 1 :2 (1 cement : 2

Coarse sand) to match the existing floor :

9 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% 1350.00 Sqm 331.85 447993.00

Total of the Sub-Head - Earth Work : - 1422675.00

Sub-Head : Concrete Work -

4.1 Providing and laying in position cement concrete of -

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

10 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived 75.00 Cum 7,290.88 546816.00

from natural sources : 8 graded stone aggregate 40

mm nominal size derived from natural sources).

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

11 4.11 Providing and laying damp-proof course 50mm 40.00 Sqm 530.60 21224.00

thick with cement concrete 1:2:4 (1 cement : 2

coarse sand (zone-III) derived from natural sources :

4 graded stone aggregate 20mm nominal size

derived from natural sources).

12 4.12 Extra for providing and mixing water proofing 15.00 units 19.43 291.00

material in cement concrete work in doses by

weight of cement as per manufacturer’s

13 4.13 Providing and applying a coat of residual petroleum 40.00 Sqm 156.42 6257.00

bitumen of grade of VG-10 of approved quality

using 1.7 kg per square metre on damp proof

course after cleaning the surface with brushes and

finally with a piece of cloth lightly soaked in

14 4.17 Making plinth protection 50mm thick of cement 150.00 Sqm 801.98 120296.00

concrete 1:3:6 (1 cement : 3 coarse sand (zone-III)

derived from natural sources : 6 graded stone

aggregate 20 mm nominal size derived from natural

sources) over 75mm thick bed of dry brick ballast 40

mm nominal size, well rammed and consolidated

and grouted with fine sand, including necessary

excavation leveling & dressing & finishing the top

4.20 Providing and laying in position ready mixed or site -

batched design mix cement concrete for plain

cement concrete work; using coarse aggregate and

fine aggregate derived from natural sources,

Portland Pozzolana/Ordinary Portland/Portland Slag

cement, admixtures in recommended proportions

as per IS : 9103 to accelerate/ retard setting of

concrete, to improve durability and workability

without impairing strength; including pumping of

concrete to site of laying, curing, carriage for all

leads; but excluding the cost of centering,

shuttering and finishing as per direction of the

Engineer-in-charge; for the following grades of

Note : Extra cement upto 10% of the minimum -

specified cement content in design mix shall be

payable separately. In case the cement content in

design mix is more than 110% of the minimum

specified cement content, the contractor shall have

discretion to either re-design the mix or bear the

cost of extra cement.

4.20.1 All works up to plinth level: -

15 4.20.1.1 Concrete of M-10 grade with minimum cement 75.00 Cum 9,456.26 709220.00

content of 220 kg/cum.

Total of the Sub-Head - Concrete Work : - 1404104.00

Sub-Head : Reinforced Cement Concrete -

16 5.3 Reinforced cement concrete work in beams, 10.00 Cum 12,314.34 123143.00

suspended floors, roofs having slope up to 15°

landings, balconies, shelves, chajjas, lintels, bands,

plain window sills, staircases and spiral stair cases

above plinth level up to floor five level, excluding

the cost of centering, shuttering, finishing and

reinforcement with 1:1.5:3 (1 cement : 1.5 coarse

sand(zone-III)derived from natural sources : 3

graded stone aggregate 20 mm nominal size derived

from natural sources).

5.9 Centering and shuttering including strutting, -

propping etc. and removal of form for :

17 5.9.1 Foundations, footings, bases of columns, etc. for 150.00 Sqm 419.72 62958.00

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

18 5.9.2 Walls (any thickness) including attached pilasters, Sqm 901.73

butteresses, plinth and string courses etc.

19 5.9.4 Shelves (Cast in situ) 10.00 Sqm 992.44 9924.00

20 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 150.00 Sqm 1,028.88 154332.00

21 5.9.21 Lintels, beams, plinth beams, girders, bressumers 375.00 Sqm 901.14 337927.00

and cantilevers with water proof ply 12 mm thick

5.22 Steel reinforcement for R.C.C. work including -

straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

22 5.22.6 Thermo-Mechanically Treated bars of grade Fe- 19000.00 Kg 115.43 2193205.00

5.22A Steel reinforcement for R.C.C. work including -

straightening, cutting, bending, placing in position

and binding all complete above plinth level.

23 5.22A.6 Thermo-Mechanically Treated bars of grade Fe- 5000.00 Kg 115.43 577159.00

24 5.30 Add for plaster drip course/ groove in plastered 50.00 m 83.91 4196.00

surface or moulding to R.C.C. projections

5.33 Providing and laying in position ready mixed or site -

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and

fine aggregate derived from natural sources,

Portland Pozzolana/ Ordinary Portland/ Portland

Slag cement, admixtures in recommended

proportions as per IS: 9103 to accelerate/ retard

setting of concrete, to improve durability and

workability without impairing strength; including

pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of

centering, shuttering, finishing and reinforcement

as per direction of the engineer-in-charge; for the

following grades of concrete.

Note: Extra cement up to 10% of the minimum -

specified cement content in design mix shall be

payable separately. In case the cement content in

design mix is more than 110% of the specified

minimum cement content, the contractor shall have

discretion to either re-design the mix or bear the

cost of extra cement

5.33.1 All works upto plinth level -

25 5.33.1.1 Concrete of M25 grade with minimum cement 135.00 Cum 10,172.93 1373346.00

content of 330 kg /cum

26 5.33.1.2 Concrete of M30 grade with minimum cement 20.00 Cum 10,334.50 206690.00

content of 350 kg /cum

5.33.2 All works above plinth level upto floor V level -

27 5.33.2.1 Concrete of M25 grade with minimum cement 25.00 Cum 10,553.59 263840.00

content of 330 kg /cum

28 5.33.2.2 Concrete of M30 grade with minimum cement 5.00 Cum 10,715.15 53576.00

content of 350 kg /cum

29 5.35 Add for using extra cement in the items of design 60.00 Qtl 785.07 47104.00

mix over and above the specified cement content

Total of the Sub-Head - Reinforced Cement - 5407400.00

Sub-HeadConcrete : Work

6.1 Brick work with common burnt clay F.P.S. (non -

modular) bricks of class designation 7.5 in

foundation and plinth in:

30 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 65.00 Cum 7,633.65 496187.00

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

6.4 Brick work with common burnt clay F.P.S. (non -

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level

in all shapes and sizes in :

31 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 150.00 Cum 9,746.10 1461915.00

32 6.5 Extra for brick work / AAC block masonry / Tile brick Cum 181.36

masonry in superstructure above floor V level, for

each four floors or part thereof by mechanical

6.12 Half brick masonry with common burnt clay F.P.S. -

(non modular) bricks of class designation 7.5 in

foundations and plinth in :

33 6.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 5.00 Sqm 968.68 4843.00

6.13 Half brick masonry with common burnt clay F.P.S. -

(non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

34 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 200.00 Sqm 1,202.80 240561.00

35 6.15 Extra for providing and placing in position 2 Nos 200.00 Sqm 112.17 22433.00

6mm dia. M.S. bars at every third course of half

brick masonry.ird course of half brick masonry.

Total of the Sub-Head - Masonry Work : - 2225939.00

Sub-Head : Cladding Work -

8.2 Providing and fixing 18 mm thick gang saw cut, -

mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters,

window sills, facias and similar locations of required

size, approved shade, colour and texture laid over

20 mm thick base cement mortar 1:4 (1 cement : 4

coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all

8.2.2 Granite stone slab colour black, Cherry/Ruby red -

8.2.3 Granite stone slab all colour and texture except -

black, Cherry/ Ruby red

8.3 Providing edge moulding to 18 mm thick marble -

stone counters, Vanities etc., including machine

polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-

41 8.4 Extra for fixing marble /granite stone, over and 20.00 m 608.52 12170.00

above corresponding basic item, in facia and drops

of width upto 150 mm with epoxy resin based

adhesive, including cleaning etc. complete.

42 8.5 Extra for providing opening of required size & shape 10.00 No. 1,047.50 10475.00

for wash basin/kitchen sink in kitchen platform,

vanity counter and similar location in marble/

Granite/ stone work, including necessary holes for

pillar taps etc. including moulding, rubbing and

polishing of cut edges etc. complete

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

43 8.31 Providing and fixing Ist quality ceramic glazed wall 310.00 Sqm 1,357.09 420697.00

tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-

Charge, in skirting, risers of steps and dados, over

12 mm thick bed of cement mortar 1:3 (1 cement :

3 coarse sand) and jointing with grey cement slurry

@ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade

Total of the Sub-Head - Cladding Work : - 553652.00

Sub-Head : Wood and P.V.C. Work -

9.1 Providing wood work in frames of doors, windows, -

clerestory windows and other frames, wrought

framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length (hold

fast lugs or dash fastener shall be paid for

9.7 Providing and fixing panelling or panelling and -

glazing in panelled or panelled and glazed shutters

for doors, windows and clerestory windows (Area of

opening for panel inserts excluding portion inside

grooves or rebates to be measured). Panelling for

panelled or panelled and glazed shutters 25 mm to

9.7.7 Float glass panes -

45 9.7.7.2 5.5 mm thick glass panes (weight not less than 1.00 Sqm 2,783.26 2783.00

9.21 Providing and fixing ISI marked flush door shutters -

conforming to IS : 2202 (Part I) non-decorative type,

core of block board construction with frame of 1st

class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and

face veneers on both faces of shutters:

46 9.21.1 35 mm thick including ISI marked Stainless Steel 65.00 Sqm 2,560.85 166455.00

butt hinges with necessary screws

47 9.23 Extra for providing lipping with 2nd class teak wood 65.00 Sqm 494.85 32165.00

battens 25 mm minimum depth on all edges of flush

door shutters (over all area of door shutter to be

9.24 Extra for providing vision panel not exceeding 0.1 -

sqm in all type of flush doors (cost of glass

excluded) (overall area of door shutter to be

48 9.24.1 Rectangular or square. 25.00 Sqm 213.15 5329.00

9.40 Providing and fixing wooden moulded beading to -

door and window frames with iron screws, plugs

and priming coat on unexposed surface etc.

9.40.1 2nd class teak wood -

9.74 Providing and fixing bright finished brass tower -

bolts (barrel type) with necessary screws etc.

9.75 Providing and fixing bright finished brass door latch -

with necessary screws etc. complete :

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

53 9.76 Providing and fixing bright finished brass 100 mm 25.00 No. 914.73 22868.00

mortice latch and lock with 6 levers and a pair of

lever handles of approved quality with necessary

screws etc. complete.

54 9.82 Providing and fixing bright finished brass hanging 25.00 No. 130.20 3255.00

type floor door stopper with necessary screws, etc.

9.127 Providing & Fixing decorative high pressure -

laminated sheet of plain / wood grain in gloss / matt

/ suede finish with high density protective surface

layer and reverse side of adhesive bonding quality

conforming to IS : 2046 Type S, including cost of

adhesive of approved quality.

Total of the Sub-Head - Wood And P.V.C Work : - 708147.00

Sub-Head : Steel Work -

56 10.2 Structural steel work riveted, bolted or welded in 57000.00 Kg 143.10 8156649.00

built up sections, trusses and framed work,

including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer all

57 10.19 Providing and fixing mild steel round holding down 1000.00 Kg 104.03 104033.00

bolts with nuts and washer plates complete.

10.25 Steel work welded in built up sections/ framed -

work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer using structural steel etc. as required.

58 10.25.2 In gratings, frames, guard bar, ladder, railings, 300.00 Kg 184.73 55420.00

brackets, gates and similar works.

10.27 Providing and fixing carbon steel galvanised -

(minimum coating 5 micron) dash fastener of 10

mm dia double threaded 6.8 grade (yield strength

480 N/mm2), counter sunk head, comprising of 10

mm dia polyamide PA 6 grade sleeve, including

drilling of hole in frame , concrete/ masonry, etc. as

per direction of Engineer-in-charge.

60 10.28 Providing and fixing stainless steel ( Grade 304) 1000.00 Kg 826.70 826700.00

railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting

the same with necessary stainless steel nuts and

bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners ,

stainless steel bolts etc., of required size, on the top

of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in charge,

(for payment purpose only weight of stainless steel

members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

Total of the Sub-Head - Steel Work : - 9202873.00

Sub-Head : Flooring -

11.26 Kota stone slab flooring over 20 mm (average) thick -

base laid over and jointed with grey cement slurry

mixed with pigment to match the shade of the slab

including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

62 11.27 Kota stone slabs 20 mm thick in risers of steps, 250.00 Sqm 2,520.24 630059.00

skirting, dado and pillars laid on 12 mm (average)

thick cement mortar 1:3 (1 cement 3 coarse sand)

and jointed with grey cement slurry mixed with

pigment to match the shade of the slabs, including

rubbing and polishing complete.

63 11.31 Extra for pre finished nosing in treads of steps of 75.00 m 204.86 15364.00

Kota stone/ sand stone slab.

64 11.32 Extra for Kota stone/ sand stone in treads of steps 35.00 Sqm 47.25 1654.00

and risers using single length up to 1.05 metre .

11.41A Providing and laying Vitrified tiles in floor in -

different sizes (thickness to be specified by the

manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid

on 20 mm thick cement mortar 1:4 (1 cement: 4

coarse sand) jointing with grey cement slurry @3.3

kg/sqm including grouting the joints with white

cement and matching pigments etc. The tiles must

be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel,

plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently

11.41A.1 Double charge vitrified tile polished finish of size -

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size -

11.46 Providing and laying Vitrified tiles in different sizes -

(thickness to be specified by manufacturer) with

water absorption less than 0.08 % and conforming

to I.S. 15622, of approved make in all colours &

shade in skirting, riser of steps, over 12 mm thick

bed of cement mortar 1:3 (1cement: 3 coarse sand),

jointing with grey cement slurry @ 3.3kg/sqm

including grouting the joint with white cement &

matching pigments etc. complete.

Total of the Sub-Head - Flooring : - 3460076.00

Sub-Head : Roofing -

68 12.34 Providing and fixing thermal insulation of ceiling 2000.00 Sqm 752.47 1504949.00

(under deck insulation) with Resin Bonded Fibre

glass wool conforming to IS : 8183, density 24

kg/m3, 50 mm thick, wrapped in 200G Virgin

Polythene bags, fixed to ceiling with metallic cleats

(50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm

x 24 gauge wire mesh, for top most ceiling of

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

12.45 Providing and fixing false ceiling at all height -

including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets

and galvanized with zinc coating of 120 gms/sqm

(both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with

flanges of 27 mm and 37 mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50 mm long with 6 mm dia

bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with

nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5

mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. -

intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5

mm thick 27 mm high having flanges of 20 mm and

30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of

tapered and square edges of the board with

recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and

two coats of primer suitable for board, all as per

manufacturer's specification and also including the

cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter

channels suitably fixed, all complete as per

drawings, specification and direction of the

Engineer in Charge but excluding the cost of

painting with :

69 12.45.1 12.5 mm thick tapered edge gypsum plain board 75.00 Sqm 1,451.11 108833.00

conforming to IS: 2095- (Part I) : 2011 (Board with

BIS certification marks)

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

70 12.50 Providing and fixing precoated galvanised iron 2000.00 Sqm 790.58 1581154.00

profile sheets (size, shape and pitch of corrugation

as approved by Engineer-in-Charge) of total coated

thickness 0.50mm (base metal of minimum 0.45mm

thickness with total coating thickness of 0.05mm)

with zinc coating 120 grams per sqm as per IS:277,

in 240 mpa steel grade, 5-7 microns epoxy primer

on both side of the sheet and polyester top coat 15-

18 microns. Sheet should have protective guard film

of 25 microns minimum to avoid scratches during

transportation and should be supplied in single

length upto 12 metre or as desired by Engineer-in-

charge. The sheet shall be fixed using self drilling

/self tapping screws of size (5.5x 55 mm) with

EPDM seal, complete upto any pitch in horizontal/

vertical or curved surfaces, excluding the cost of

purlins, rafters and trusses and including cutting to

size and shape wherever required.

12.51 Providing and fixing precoated galvanised steel -

sheet roofing accessories of total coated thickness

0.50mm (base metal of minimum 0.45mm thickness

with total coating thickness of 0.05mm) with Zinc

coating 120 grams per sqm as per IS: 277, in 240

mpa steel grade, 5-7 microns epoxy primer on both

side of the sheet and polyester top coat 15-18

microns using self drilling/ self tapping screws

72 12.51.2 Flashings/ Aprons.( Upto 600 mm) 25.00 m 519.74 12993.00

Total of the Sub-Head - Roofing : - 3412686.00

Sub-Head : Finishing -

13.1 12 mm cement plaster of mix : -

13.2 15 mm cement plaster on the rough side of single or -

half brick wall of mix :

78 13.11 18 mm cement plaster in two coats under layer 12 500.00 Sqm 555.00 277502.00

mm thick cement plaster 1:5 (1 cement: 5 coarse

sand) finished with a top layer 6mm thick cement

plaster 1:6 (1 cement: 6 fine sand).

13.16 6 mm cement plaster of mix : -

80 13.26 Providing and applying plaster of paris putty of 2 737.50 Sqm 281.17 207361.00

mm thickness over plastered surface to prepare the

surface even and smooth complete.

13.45 Finishing walls with textured exterior paint of -

required shade :

81 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 500.00 Sqm 239.32 119660.00

sqm) over and including priming coat of exterior

primer applied @2.20kg/10 sqm.

13.61 Painting with synthetic enamel paint of approved -

brand and manufacture to give an even shade :

82 13.61.1 Two or more coats on new work. 2000.00 Sqm 166.86 333720.00

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

13.83 Wall painting with premium acrylic emulsion paint -

of interior grade, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre. of

approved brand and manufacture, including

applying additional coats wherever required to

achieve even shade and colour.

Total of the Sub-Head - Finishing : - 1617989.00

Sub-Head : Aluminium Work -

21.1 Providing and fixing aluminium work for doors, -

windows, ventilators and partitions with extruded

built up standard tubular sections/appropriate Z

sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM

rubber/neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass/ stainless steel screws, all

complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling

and dash fasteners to be paid for separately) :

21.1.1 For fixed portion -

84 21.1.1.2 Powder coated aluminium (minimum thickness of 75.00 Kg 568.22 42617.00

powder coating 50 micron)

21.1.2 For shutters of doors, windows & ventilators -

including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever

required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for

85 21.1.2.2 Powder coated aluminium (minimum thickness of 250.00 Kg 679.05 169763.00

powder coating 50 micron)

21.3 Providing and fixing glazing in aluminium door, -

window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as

per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap

beading shall be paid in basic item):

86 21.3.3 With float glass panes of 8 mm thickness (weight 60.00 Sqm 1,803.88 108233.00

not less than 20 kg/sqm)

21.8 Filling the gap in between aluminium frame & -

adjacent RCC/ Brick/ Stone work by providing

weather silicon sealant over backer rod of approved

quality as per architectural drawings and direction

of Engineer-in-charge complete.

87 21.8.1 Upto 5mm depth and 5 mm width 125.00 m 103.55 12944.00

21.11 Providing and fixing stainless steel (SS 304 grade) -

adjustable friction windows stays of approved

quality with necessary stainless steel screws etc. to

the side hung windows as per direction of Engineer-

in-charge complete.

21.15 Providing and fixing aluminium casement windows -

fastener of required length for aluminium windows

with necessary screws etc. complete.

89 21.15.2 Powder coated minimum thickness 50 micron 30.00 No. 104.84 3145.00

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Total of the Sub-Head - Aluminium Work : - 347757.00

Sub-Head : New Technologies and Materials -

26.27 Providing and fixing mineral fibre false ceiling tiles -

at all heights of size 595X595mm of approved

texture, design and pattern. The tiles should have

Humidity Resistance (RH) of 99%, Light Reflectance

> 85%, Thermal Conductivity k = 0.052 - 0.057 w/m

K, Fire Performance as per (BS 476 pt - 6 &7)in true

horizontal level suspended on interlocking T-Grid of

hot dipped all round galvanized iron section of 0.33

mm thick (galvanized @120 gsm) comprising of

main T runners of 15x32 mm of length 3000 mm,

cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of

length 600 mm to form grid module of size 600x600

mm suspended from ceiling using galvanized mild

steel item (galvanised @ 80 gsm) 50 mm long 8mm

outer diameter M-6 dash fasteners, 6 mm diameter

fully threaded hanger rod up to 1000 mm length

and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centre to centre along main ‘T’. -

The system should rest on periphery walls

/partitions with the help of GI perimeter wall angle

of size 24x24X3000 mm made of 0.40 mm thick

sheet, to be fixed to the wall with help of plastic

rawl plug at 450 mm centre to centre & 40 mm long

dry wall S.S. screws. The exposed bottom portion of

all T-sections used in false ceiling support system

shall be pre-painted with polyester baked paint, for

all heights. The work shall be carried out as per

specifications, drawings and as per directions of the

engineer-in charge.

90 26.27.1 With 16 mm thick beveled tegular mineral fibre Sqm 2,497.65

false ceiling tile (NRC 0.55 to 0.6)

91 26.65 Providing and fixing roofing consist of 0.8 mm thick 50.00 Sqm 1,632.85 81642.00

galvanized steel deck sheet confirming to IS

277:1992 used as permanent shuttering over which

MS wire mesh 3mm laid at 100x100 mm grid

including edge trim covered with concrete. This

metal deck will be supported on structural steel

beam with shear studs. (Structural steel like Beam,

column, joists etc. & concrete of different grade as

per design will be paid separately).

Total of the Sub-Head - New Technologies And - 81642.00

Sub-Head : Non Schedule Items -

1 Providing and fixing 18 mm thick gang saw cut, -

mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters,

window sills, facias and similar locations of required

size,approved shade, colour and texture laid with

eopxy resin based special adhesive, epoxy touch

ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc.

complete at all levels.

Granite stone slab colour black, Cherry/Ruby red -

92 1.1 Area of slab upto 0.50 sqm 1.50 Sqm 5,718.00 8,577.00

93 1.2 Area of slab over 0.50 sqm 1.50 Sqm 5,441.00 8,162.00

2 Granite stone slab all colour and texture except -

black, Cherry/ Ruby red

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

94 2.1 Area of slab upto 0.50 sqm 1.50 Sqm 4,475.00 6,713.00

95 2.2 Area of slab over 0.50 sqm 1.50 Sqm 4,153.00 6,230.00

3 Providing and fixing Fully Insulated Wooden -

Acoustic door (Navair or equivalent) at all levels

from ISO 9001:2015 certified Manufacturer . The

door must carry the Batch plate for offered door

details. Door frame shall be Single rebate Navair

make profile of section 140 x 90 mm made out of

Ivory Coast ( 2nd Class ) with factory made groove

of suitable size so as to accomodate Fire & smoke

seal of size 20x4mm of SEALz MAKE. The frame

must be primed with Fire retardant primer FR880

Wooden shutter must be of 77mm thickness -

finished with commercial ply on both faces. The

Shutter may be provided with 6mm thick

commercial ply on both faces which may be pasted

with 1mm thick laminate and both these items may

be replaced with teak veneer . Laminate and veneer

payable in extra item . The composite thickness of

the core insulation will be 65mm thick consists of

calcium Silicate boards and treated wool Insulation

material . The shutter should be provided with heat

activated intumescent fire seal strip of size 20mm x

4 mm mounted in the suitable grooves all three

sides except bottom provided on Exposed wooden

96 3.1 Door shutter provided with commercial ply on both 10.00 SQM 28,595.00 2,85,950.00

faces with 1mm Thick Regular SF grade Factory

pasted Laminate on both faces and Main frame

made out of hardwood frame. Frame primed with

Fire retardant primer.

ACOUSTIC SEAL SET TO ACHIEVE db DROP DOWN -

PROPERTIES BETWEEN 30-32db

97 4 Acoustic Seal Set for Door :- 4.00 Set 17,072.00 68,288.00

A) Perimeter seal IS 1212 of Becker Fire Solutions

B) Mortise Type Drop Down Seal- RP8Si of

Raven/Becker Fire Solutions make

C) Astragal Seal for meeting point of Double Leaf

Door- RP16Si of Raven/ Becker Fire Solutions make

To achieve 35-38 db drop down properties an extra -

exposed perimeter seal RP78Si of Raven / Becker

Fire Solutions make can be provided on peremeter

98 4.1 Supply & fixing of SS Ball Bearing Hinges of size 100 30.00 Each 640.00 19,200.00

x 89 x 3mm complet with SS Screws of BB1753

Becker Fire Soloutions / DORMA 3090F / GEZE

99 5 Supply & fixing of anchor fastners of HILTI / FISHER/ 48.00 Each 121.00 5,808.00

Equvalent of M10X160mm length.

100 6 Supply & fixing of door closers of BLC-605 EN 3-6 6.00 Each 12,092.00 72,552.00

Becker Fire Soloutions/ TS-89 DORMA / GEZE TS

2000 Series Make.

101 7 Supply and Filling the gap between wall & Door 4.00 Each 4,268.00 17,072.00

frame by using silicone sealant and Wool insulaion

on both side of the door

102 8 Supply & fixing of SS 304 grade D Type SS Pull 4.00 Set 2,276.00 9,104.00

Handle B2B of size 300mm mm Long of Geze-

98163016 / Becker FS-BPH1001-12/ Lockwood 144-

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

103 9 Supply & fixing of Mortise Dead Lock Geze / Becker 4.00 Each 4,979.00 19,916.00

FS-DL7260K / Lockwood V1-4 Make with minimum

100mm long Euro Profile Cylinder with Both Side

104 10 Providing and Fixing Channelled Woodworks 510.00 Sqm 7,144.84 36,43,868.40

perforated panels made of a Moisture resistant

fibre board substrate with a laminated facing as per

the approved shade. Item is to be executed as per

approved drawing , design and as per directions of

Engineer-in-charge

105 11 Providing and installation of Multipurpose Vinyl 120.00 Sqm 2,845.00 3,41,400.00

Sports Sheet Flooring (Armstrong Athleta or

equivalent) 4.5 mm thk, Inc, 1.8m wide and 15 m

long, having a nominal total thickness of 4.5mm.

The wear surface shall be 0.45 mm and PUR coated

with UV Treatment. Total weight should

3.03mm/sqm. Athleta shall conform to flammability

Class Cfl as per EN 13501-1;Shock Absorption more

than 28%; sliding coefficient of 0.45-0.65; energy

return of 0.38m/s; vertical deformation of 2.3 mm

and sound insulation of 20-22 db. Impact Resistance

of 8N/M (as per DIN18032); Abrasion Resistance of

7 mm, Indentation Resistance of0.6mm (as per

EN1016), Friction Coefficient of 0.6 (as per

GB/T14833-1993) and Rebound Coefficient of 0.86

(as per GB/T14833-1993). Design and shade to be

as per architect choice, Installation should be done

by authoiriesd certified distributor

Single component Self Levelling Underlay for -

12 Providing and applying 5mm Moisture insenstive -

Self leveling flooring for surface area as per the

specifications listed below and as approved by the

engineer-in-charge:

Providing & applying Fibtop 90 (Cementitious 1K -

self leveling screed) of Fibrex Make on the Surface

to be treated which should be free from all dust dirt

debris and unsound materials and oil. Use grinding

media to cover as much undulation as possible but

up to 1mm. Apply Fibloor cem Primer @ 150-

250gms/sq m (depending on surface ) over the

treated surface and allow to cure for at least 48-72

hrs before applying final coat over the treated

surface , Apply FIBTOP-90 Cementitious Single

component self levelling screed @ 8kg per square

meter for DFT of 5mm thickness through notch

trowel and after that use spike roller to remove/

release air trapped inside the product FIBTOP- 90.

This provide a compressive strength after 28 days

curing of approx. 35 N/mm2 ,Flexural Strength after

28n days will be 8.8 N/mm² to achieve total 5mm

thickness as per engineer-incharge of approved

make Fibrex or equivalent.

All the work has to be carried out by the approved -

specialist agency.

1) Fibfloor Cem Primer -48 hrs

2) Fibtop-90 -48 hrs Complete Curing for 72 hrs

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

13 Providing and laying Saint Gobain Ecophon - -

Advantage E tegular edge tile with 15 mm thickness

,easily demountable tile , manufactured from High

density glass wool , visible surface is a batch

painted glass tissue in white, back of the tile

covered with glass tissue. Size 600x600x15mm,

1200x600x15mm Acoustics-Sound absorption(Alpha

W) - 0.95 at 200 mm o.d.s as per EN ISO 354

Acoustics-Sound absorption Class - Class A at 200

mm o.d.s as per EN ISO 11654Acoustics-Articulation

class - 180 as per ASTM E1111, ASTM E1110

NRC - 0.9 NRC as per ASTM C 423

Humidity Resistance -Permanent ambient RH up to

95% at 30*C without sagging, warping and

delaminating ( 13964:2014).

Fire Safety - Tested and classified as non

combustible according to EN ISO 1182 with reaction

to fire classification class A2 s1 d0 according to EN

13501-1 - European Standard.

Light Reflectance - 83% light reflectance.

Indoor Health & Well-being - Complying with the

French regulation on VOC emissions, A+ level.

Certified by the Finnish Building Information Group

(RTS) with the M1 label. Free from substances of

very high Concern (SVHC) above 100 ppm as

defined by the European REACH regulation

(No1907/2006).Product Certified under GRIHA

council of India for Green Ratings. Environmental

Product declaration (EPD) acc to international ISO

14025 & EN 15804 series of standards.

107 13.1 Circularity - Re-cycled

Framing system:- content

Providing of fixing

and more than 70% pre

coated (Exposed portion only) GI T Grid system in

600x600mm module which includes providing and

fixing wall angle along the perimeter of the room

with help of nylon sleeves and wooden screws at

300mm centers. Then suspending the main tee of

size from the soffit with help of soffit cleat, rawl

plugs and wire rod with Leveling spring clip at

1200mm c/c. 1200mm Cross Tee is then interlocked

into the pre-cut slots in the main Tees at 600mm

centres in direction perpendicular to the main Tee

to make a grid of 600x1200mm.Finally 600mm

Cross tees are then interlocked into the pre cut slots

in the 1200mm tees at 1200mm centres and in

direction parallel to the main tee. Cross Tees having

length more than 600mm are to be supported

Dimensions:- Main Runner ‘T’ section of size

14x32mm hot dipped galvanized steel body and

capped with precoated of dipped galvanized steel

and 3.6mtr. Long. Cross Runner ‘T’ section of size

14x32mm hot dipped galvanized steel body and

capped with precoated of dipped galvanized steel

and 1.2/0.6mtr. Long. Perimeter wall angle of hot

dipped galvanized steel angle body of size 19x19mm

and 3.05mtr. long

Total of the Sub-Head - Non Schedule Items : 55,19,940.40

Digitally signed by PRIYA

Name of the work : Constrcution of Community Center for SAIL, Gua Ore Mines

BOQ for External Development Civil Works

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Sub-Head : Earth Work

2.6 Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30cm in depth, 1.5m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth, lead up to 50m and lift up to 1.5m,as

directed by Engineer-in-Charge.

1 2.6.1 All kinds of soil 42.72 Cum 189.98 8116.00

2.7 Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

(exceeding 30 cm in depth, 1.5m in width as well as 10

sqm on plan) including getting out and disposal of

excavated earth, lead up to 50 m and lift up to 1.5m, as

directed by Engineer-in-Charge.

2 2.7.1 Ordinary rock Cum 533.97

3 2.25 Filling available excavated earth (excluding rock) in 42.72 Cum 209.78 8962.00

trenches, plinth, sides of foundations etc. in layers not

exceeding 20cm in depth, consolidating each deposited

layer by ramming and watering, lead up to 50 m and lift

4 2.25A Excavating, supplying and filling of local earth (including 2417.73 Cum 749.75 1812679.00

royalty) by mechanical transport up to a lead of 5 km,

also including ramming and watering of the earth in

layers not exceeding 20 cm in trenches, plinth, sides of

foundation etc., complete.

5 2.27 Supplying and filling in plinth with sand under floors, 32.10 Cum 2273.05 72965.00

including watering, ramming, consolidating and dressing

Total of the Sub-Head - Earth Work : 1902722.00

Sub-Head : Concrete Work

4.1 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

6 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from 139.57 Cum 7290.88 1017564.00

natural sources : 8 graded stone aggregate 40 mm

nominal size derived from natural sources).

7 4.11 Providing and laying damp-proof course 50mm thick 100.00 Sqm 530.60 53060.00

with cement concrete 1:2:4 (1 cement : 2 coarse sand

(zone-III) derived from natural sources : 4 graded stone

aggregate 20mm nominal size derived from natural

8 4.12 Extra for providing and mixing water proofing material in 100.00 units 19.43 1943.00

cement concrete work in doses by weight of cement as

per manufacturer’s specification.

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

9 4.13 Providing and applying a coat of residual petroleum 100.00 Sqm 156.42 15642.00

bitumen of grade of VG-10 of approved quality using 1.7

kg per square metre on damp proof course after

cleaning the surface with brushes and finally with a piece

of cloth lightly soaked in kerosene oil.

Total of the Sub-Head - Concrete Work : 1088209.00

Sub-Head : Reinforced Cement Concrete

5.9 Centering and shuttering including strutting, propping

etc. and removal of form for :

10 5.9.1 Foundations, footings, bases of columns, etc. for mass 50.67 Sqm 419.72 21266.00

Walls (any thickness) including attached pilasters,

butteresses, plinth and string courses etc.

11 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 50.00 Sqm 1028.88 51444.00

12 5.9.21 Lintels, beams, plinth beams, girders, bressumers and 31.05 Sqm 901.14 27980.00

cantilevers with water proof ply 12 mm thick

5.22 Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete upto plinth level.

13 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or 24299.00 Kg 115.43 2804879.00

5.22A Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and

binding all complete above plinth level.

14 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or 4800.00 Kg 115.43 554073.00

5.33 Providing and laying in position ready mixed or site

batched design mix cement concrete for reinforced

cement concrete work; using coarse aggregate and fine

aggregate derived from natural sources, Portland

Pozzolana/ Ordinary Portland/ Portland Slag cement,

admixtures in recommended proportions as per IS: 9103

to accelerate/ retard setting of concrete, to improve

durability and workability without impairing strength;

including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering,

shuttering, finishing and reinforcement as per direction

of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified

cement content in design mix shall be payable

separately. In case the cement content in design mix is

more than 110% of the specified minimum cement

content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

5.33.1 All works upto plinth level

15 5.33.1.1 Concrete of M25 grade with minimum cement content 148.80 Cum 10172.93 1513733.00

5.33.2 All works above plinth level upto floor V level

16 5.33.2.1 Concrete of M25 grade with minimum cement content 10.00 Cum 10553.59 105536.00

17 5.35 Add for using extra cement in the items of design mix 44.64 Qtl 785.07 35045.00

over and above the specified cement content therein.

Total of the Sub-Head - Reinforced Cement Concrete : 5736148.00

Sub-Head : Masonry Work

6.1 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in foundation and plinth

18 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 50.00 Cum 7633.65 381682.00

6.4 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above

plinth level up to floor V level in all shapes and sizes in :

19 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 6.00 Cum 9746.10 58477.00

Total of the Sub-Head - Masonry Work : 440159.00

Sub-Head : Steel Work

10.25 Steel work welded in built up sections/ framed work,

including cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer using structural

steel etc. as required.

20 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, 1793.58 Kg 184.73 331334.00

gates and similar works.

10.16.3 CS- Steel work in built up tubular (round, square or 2400.00 Kg 208.07 499359.00

18 rectangular hollow tubes etc.) trusses etc., including

cutting, hoisting, fixing in position and applying a priming

coat of approved steel primer, including welding and

bolted with special shaped washers etc. complete.

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

21 12.50 Providing and fixing precoated galvanised iron profile 160.00 Sqm 790.58 126492.00

sheets (size, shape and pitch of corrugation as approved

by Engineer-in-Charge) of total coated thickness 0.50mm

(base metal of minimum 0.45mm thickness with total

coating thickness of 0.05mm) with zinc coating 120

grams per sqm as per IS:277, in 240 mpa steel grade, 5-7

microns epoxy primer on both side of the sheet and

polyester top coat 15-18 microns. Sheet should have

protective guard film of 25 microns minimum to avoid

scratches during transportation and should be supplied

in single length upto 12 metre or as desired by Engineer-

in- charge. The sheet shall be fixed using self drilling /self

tapping screws of size (5.5x 55 mm) with EPDM seal,

complete upto any pitch in horizontal/ vertical or curved

surfaces, excluding the cost of purlins, rafters and

trusses and including cutting to size and shape wherever

Total of the Sub-Head - Steel Work : 957185.00

Sub-Head : Finishing

22 13.2 15 mm cement plaster on the rough side of single or half

brick wall of mix :

13.45 Finishing walls with textured exterior paint of required

24 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 300.00 Sqm 239.32 71796.00

sqm) over and including priming coat of exterior primer

applied @2.20kg/10 sqm.

13.61 Painting with synthetic enamel paint of approved brand

and manufacture to give an even shade :

25 13.61.1 Two or more coats on new work. 300.00 Sqm 166.86 50058.00

Total of the Sub-Head - Finishing : 244831.00

Sub-Head : Road Work

26 16.1 Preparation and consolidation of sub grade with power 300.00 Sqm 234.29 70287.00

road roller of 8 to 12 tonne capacity after excavating

earth to an average of 22.5 cm depth, dressing to

camber and consolidating with road roller including

making good the undulations etc. and re- olling the sub

grade and disposal of surplus earth with lead upto 50

16.47 Painting runway/ taxi track/ apron marking with

adequate nos of coats to give uniform finish with road

marking paint of superior make as approved by the

Engineer-in-charge, i/c cleaning the surface of ail dirt,

scales, oil, grease and other foreign material etc. and

lining out complete.

27 16.47.1 New work (Two or more coats) 180.00 Sqm 201.43 36257.00

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

28 16.68 Providing and laying 60mm thick factory made cement 214.00 Sqm 1040.33 222631.00

concrete interlocking paver block of M -30 grade made

by block making machine with strong vibratory

compaction, of approved size, design & shape, laid in

required colour and pattern over and including 50mm

thick compacted bed of coarse sand, filling the joints

with fine sand etc. all complete as per the direction of

Engineer-in-charge.

29 16.69 Providing and laying at or near ground level factory 12.00 Cum 10828.87 129946.00

made kerb stone of M-25 grade cement concrete in

position to the required line, level and curvature, jointed

with cement mortar 1:3 (1 cement: 3 coarse sand),

including making joints with or without grooves

(thickness of joints except at sharp curve shall not to

more than 5mm), including making drainage opening

wherever required complete etc. as per direction of

Engineer-in-charge (length of finished kerb edging shall

be measured for payment). (Precast C.C. kerb stone shall

be approved by Engineer-in-charge).

30 16.75 Providing and laying C.C. pavement of mix M-25 with 90.00 Cum 10514.41 946297.00

ready mixed concrete from batching plant. The ready

mixed concrete shall be laid and finished with screed

board vibrator , vacuum dewatering process and finally

finished by floating, brooming with wire brush etc.

complete as per specifications and directions of Engineer-

in charge. (The panel shuttering work shall be paid for

separately). (Note:- Cement content considered in this

item is @ 330 kg/cum. Excess/less cement used as per

design mix is payable/ recoverable separately).

Total of the Sub-Head - Road Work : 1405418.00

Sub-Head : Precast Boundary wall

Digitally signed by PRIYA

Sl.No. Description of Item Quantity Unit Rate (Rs) Amount(Rs)

Fabrication and manufacturing of solid precast concrete

element with provisions of shear keys, connecting loops,

dowel tubes and proper lifting accessories for walls,

beams, slabs, stairs, column etc, of various thickness,

shape and size of different concrete grades

manufactured in controlled factory environment with

approved methodology including moulds (Pallet system,

Tilts form, table moulds, battery moulds, vertical

moulds, beam moulds, column moulds, staircase

26.74 moulds, Facade mould, etc.), mixing, transporting and

placing of concrete, vibrating, curing, finishing, making

necessary cutout/holes of required sizes for services,

yard handling & stacking all complete as per IS

11447:1985 and as per approved shop drawings and

design mix as per the direction of Engineer-in-Charge

(Cost of reinforcement, Mechanical, Electrical and

Plumbing inserts will be paid separately).

31 26.74.1 Concrete grade M-35 (Cement content 370 kgs) 20.58 cum 22399.99 460925.00

Steel reinforcement for R.C.C. work including

5.22A straightening, cutting, bending, placing in position and

binding all complete above plinth level.

32 5.22A.2 Hard drawn steel wire 308.66 Kg 102.53 31648.00

Transportation of Precast Elements by flat bed Trailor

(Double / Triple axle 40ft Length with proper accessories

26.76 like A frame etc) from factory, including the cost of

loading, unloading & stacking at site with the help of

required capacity cranes.

26.77 Erection & Installation of Precast/Prestressed Concrete

elements in correct & final position with proper line level

and plumb at site making all arrangements (i.e cranes,

push-pull jacks & all another T & P for lifting Placing &

Alignment of elements, within erection tolerance as per

IS 15916 as per approved shop drawings and all

complete as per the direction of Engineer-in-Charge but

excluding the cost of sim pads, non shrink grout and

steel works i.e hangers. All work up to fifth floor.

33 26.77.3 Solid concrete wall elements 20.58 cum 2911.54 59911.00

Total of the Sub-Head - Precast Boundary wall : 638246.00

Digitally signed by PRIYA

Name of Project: COMMUNITY CENTER , BOKARO

PLUMBING WORKS DETAILED ESTIMATE

S.I DSR MR MR DSR

Description of Item Unit Total Qty

No Item No Item No Rate Amount Rate Amount

SUBHEAD-I(Sanitary Fixtures & CP Brass Fittings)

1 17.3 MR 1 Providing and fixing white vitreous china pedestal type water

closet (European type) with seat and lid, 10 litre low level

white vitreous china flushing cistern & C.P. flush bend with

fittings & C.I. brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and mosquito

proof coupling of approved municipal design complete,

including painting of fittings and brackets, cutting and making

good the walls and floors wherever required :

1.1 17.3.2 MR 1.1 W.C. pan with ISI marked black solid plastic seat and lid Each 8 8,427.86 67422.90632

2 17.7 MR 2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. -

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require:

2.1 17.7.2 MR 2.1 White Vitreous China Wash basin size 630x450 mm with a Each 7 2,382.86 16680.03684

single 15 mm C.P. brass pillar tap

3 17.22A MR 3 Providing and fixing CP Brass 32 mm size Bottle Trap of Each 7 1,107.55 7752.82508

approved quality & make and as per the direction of Engineer-

4 17.4 MR 4 Providing and fixing white vitreous china flat back or wall -

corner type lipped front urinal basin of 430x260x350 mm and

340x410x265 mm sizes respectively with automatic flushing

cistern with standard flush pipe and C.P. brass spreaders with

brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and

floors wherever required :

4.4 17.4.1 MR 4.1 One urinal basin with 5 litre white P.V.C. automatic flushing Each 8 6,698.74 53589.921

5 17.16A MR 5 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube Each 8 373.70 2989.56196

upto 1 metre long with S.S. triangular plate to Eureopean type

W.C. of quality and make as approved by Engineer - in -

6 18.53 MR 6 Providing and fixing C.P. brass angle valve for basin mixer and Each 25 614.67 15366.83225

geyser points of approved quality conforming to IS:8931

7 MR 7 Providing & Fixing in position C.P. Brass coat hook of -

approved make (to the approval of Engineer-in-charge ) fixed

into wall with C.P. brass screws and rawl plugs etc. complete

in all respect.

7.1 MR 7.1 C.P.Brass coat hook Each 8 962 7696 -

8 17.31 MR 8 Providing and fixing 600x900 mm beveled edge mirror of Each 7 1,720.99 12046.9222

superior glass (of approved quality) complete with 6 mm thick

hard board ground fixed to wooden cleats with C.P. brass

screws and washers complete.

9 17.72 MR 9 Providing and fixing PTMT towel ring trapezoidal shape 215 Each 7 248.26 1737.792595

mm long, 200 mm wide with minimum distances of 37 mm

from wall face with concealed fittings arrangement of

approved quality and colour, weighing not less than 88 gms.

10 17.71 MR 10 Providing and fixing PTMT liquid soap container 109 mm Each 7 180.19 1,261.30

wide, 125 mm high and 112 mm distance from wall of

standard shape with bracket of the same materials with snap

fittings of approved quality and colour, weighing not less than

11 17.10 MR 11 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen - -

sink as per IS:13983 with C.I. brackets and stainless steel plug

40 mm, including painting of fittings and brackets, cutting and

making good the walls wherever required:

11.1 17.10.1 MR 11.1 Kitchen sink with drain board - -

12 MR 12 Fixing of 15 mm C.P brass wall mounted mixing fittings Each - -

swinging spout for sink complete including cutting and

making good the walls where required. (Pantry, Kitchen,

Coffee-Break etc.)

Digitally signed by PRIYA

13 17.28 MR 13 Providing and fixing P.V.C. waste pipe for sink or wash basin - -

13.1 17.28.2 MR 13.1 Flexible pipe - -

SUBHEAD II(Soil, Waste, Vent & Rain Water Pipes) -

14 MR 1 Supply, installation , testing commissioning of PP Mineral

filled low noise Soil & Waste system as per EN 12056,

with density 1.9 g/cm3. PP mineral(Astolan) filled Low noise

system should has a fire classification DIN 4102-

B2/EN13501 . Product should have a chemical resistance of

pH 2-12 and is a complete sound protection system

according to DIN 4109. including with push fit rubber ring

sockets all necessary fittings and specials such as Bends,

junctions, offsets & vent cowl. Fixing at wall/ceiling level

supported by rubber line bracket & hangers etc. duly epoxy

coated. Cutting, chases/holes in floors / walls /

slab.Compliant with LABC. Weight mass per unit area of

DN100MM should not be less than 110.07kg/m3. sound

levels of not more than 15dBA as per EN 14366 at a flow

rate of 4 l/s.including all core cut ,chases ,cutting making

holes in all wall and floor as required complete in all respect.

15 MR 2 Providing fixing, testing and commissioning in position Solfit

SWR uPVC PIPE TYPE-B pipe comforming to IS:13592

including all fittings such as bends, junctions, inspection doors,

offests, cowl, access pieces/clean out plugs, clamps /supports/

hangers etc. jointing with PVC Adhesive joints including

cutting holes in walls, core cutting in slabs and making good

the same. All complete as per specification and direction of

E/l.(For rainwater piping) -

16 MR 3 Providing Fixing straight /offset type single body push fit type WC -

pan connector with factory supplied spring loaded seal

guard with integral single mould sealing fins made of flexible

EVA body, including bush/adaptor as supplied with the pan

connector (if required). Each 8 800 6400

Providing and fixing floor drain (FD) with 50mm/40mm outlet

and one 40mm inlet for waste, with SS grating (adjustable

height), having 50mm water seal and in-built NRV

18 MR 5 Providing and fixing PP/UPVC trap of self cleansing design with

screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the walls and

18.1 MR 5.1 100 mm inlet and 100 mm outlet -

18.1.1 MR 5.1.1 Sand cast iron S&S as per IS: 3989 Each 15 3,986 59794.42483 -

19 MR 6 Providing and fixing PP/UPVC grating with Cockroach proof -

strainer of approved design including setting in floor with

cement motor to match with floor finish as per architect

requirement suitable for waster and FT.

20 MR 7 Providing and fixing PP/UPVC brass grating with frame of -

approved design including setting in floor with cement motor

to match with floor finish as per architect requirement.

21 MR 8 Providing and fixing PP/UPVC extention piece for 100 mm dia

floor trap formed out of main pipe with multiple side inlets,

suitable for various dia pipes including all fixtures as required

complete as per drawing approved sample and direction of

engineer in charge. Each 15 2,508 37626.73563 -

22 MR 9 Providing and fixing cast PP floor clean out plug with

suitable insert keys for opening, male threaded joint with

threaded socket drip seal to soil / waste pipe as required

complete as per drawing approved sample and direction of

engineer in charge. Each 6 1,770 10617.15641 -

SUBHEAD III(Water Supply System(Internal)) -

Digitally signed by PRIYA

23 18.8 MR 1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings and fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good

the walls etc(inside building) -

23.1 18.8.1 MR 1.1 15 mm nominal dia Pipes Mtr 50 532.80 26639.767

23.4 18.8.4 MR 1.4 32 mm nominal dia Pipes Mtr 5 791.27 3956.36395

23.5 MR 1.5 50 mm nominal dia Pipes Mtr 5 1,074 5371.25 -

24 18.7 MR 2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply and

all CPVC plain & brass threaded fittings, including fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and

testing of joints complete as per direction of Engineer in

Internal work - Exposed on wall(vertical & terrace area) -

24.5 MR 2.5 65 mm nominal dia Pipes Mtr RO 1,925 -

24.6 MR 2.6 80 mm nominal dia Pipes Mtr RO 2,491 -

25 18.18 MR 3 Providing and fixing ball valve (brass) of approved quality, -

High or low pressure, with plastic floats complete :

25.1 18.18.1 MR 3.1 15 mm nominal dia Pipes Each 1 435.45 435.45

25.2 18.18.2 MR 3.2 20 mm nominal dia Pipes Each 4 495.01 1980.06

25.3 18.18.3 MR 3.3 25 mm nominal dia Pipes Each RO 496.67

26 18.17 MR 4 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) : -

27 MR 5 Providing and fixing Butter fly valve with nitrile seat and

stainless steel stem with lever operation and cast iron body

in powder coated finish, suitable for test pressure of

10Kg/sq.mm) with flanges, gaskets and necessary pad

locking arrangement complete required. -

28 MR 6 Providing and fixing thermal insulation in cold/hot water

pipes a Polyolefin foam of closed cell structure having

thermal conductivity of 0.036 W/M.K at an average

temperature of 30oC. complete with 24 gauge aluminium

sheet/cladding. -

28.1 MR 6.1 15 mm dia pipe RM 5 45 -

28.6 MR 6.5 50 mm dia pipe RM RO 90 -

28.7 MR 6.6 65 mm dia pipe RM RO 105 -

28.8 MR 6.7 80 mm dia pipe RM RO 120 -

SUBHEAD IV(External Sewerage & Storm Water Drainage) -

29 MR 1 Excavation in trenches with straight or open cutting in streets,

lanes or in open area with 3D/JCB or excavator including

manually dressing bed, trimming sides and side slopes for

sewers and manholes to full depths as shown in

drawings,including, dressing to correct sections and

dewatering, provision for diversion for traffic, protection of

existing services i.e. telephone cables, electric lines, water

supply lines and gas lines etc. night signals, profiles, pegs,

sight rails, boning rods, watching, etc., fixing and maintenance

of caution boards, fencing, refilling trenches, watering,

ramming and restoration of surface to original level and

removal of surplus spoil from the site of works, upto one chain

(15m) complete in all respects

29.1 MR 1.1 Depth not exceeding 3 m. BGL -

Digitally signed by PRIYA

All kinds of soil except rocky Mtr 100 224 22400 -

30 MR 2 Excavation of trenches in a Streets, Lanes or in Open Area for

Storm Sewers and Manholes to Full Depths as Shown in

Drawings,excluding Shoring, Timbering of Poling Board Frame

System Type, dressing to correct sections and dewatering,

provision for diversion for traffic, protection of existing

services i.e. telephone cables ,electric lines, water supply lines

and gas lines.night signals, profiles, Pegs, Sight rails, boning

rods, crossing over trenches for access to the houses,

watching, fencing etc., fixing and maintenance of caution

boards, refilling trenches, watering of refill in 15 cm layers,

ramming and restoration of surface to original conditions and

removal of Surplus Spoil from the Site of Works, for all Works

other than connections to Ventilating Shafts upto a Lead of 15

30.1 MR 2.1 For depth not exceeding 2 m. below Ground level -

All classes of soil except rocky Mtr 100 224 22400 -

31 19.6 MR 3 Providing and laying non-pressure NP2 class (light duty) R.C.C.

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete : -

Providing, laying and jointing glazed stoneware pipes class SP-1

with stiff mixture of cement mortar in the proportion of 1:1 (1

cement : 1 fine sand) including testing of joints etc. complete : -

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

sand : 10 graded stone aggregate 40 mm nominal size) all-round

S.W. pipes including bed concrete as per standard design : -

34 19.3 MR 5 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

sand : 10 graded stone aggregate 40 mm nominal size) Upto

haunches of R.C.C. pipes including bed concrete as per

standard design : -

35 19.7 MR 5 Constructing brick masonry manhole in cement mortar 1:4 ( 1

cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1

cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20

mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal

size), inside plastering 12 mm thick with cement mortar 1:3 (1

cement : 3 coarse sand) finished with floating coat of neat cement

and making channels in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per

standard design :

35.1 19.7.1 MR 5.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with

frame (light duty) 455x610 mm internal dimensions, total weight of

cover and frame to be not less than 38 kg (weight of cover 23 kg

and weight of frame 15 kg) : -

19.7.1.2 MR 5.1.2 With Sewer bricks conforming to IS : 4885 Each 9 13,605.44 122448.9559

36 19.4 MR 6 Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight

C.I. cover with frame of 300 x 300 mm size (inside) the weight of

cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design: -

36.2 19.4.1.1 MR 6.1.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 4 2,898.00 11591.99118

37 19.28 MR 7 Constructing brick masonry road gully chamber 45x45x77.5 cm

with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with

precast R.C.C. vertical grating complete as per standard design :

37.1 19.28.1 MR 7.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 6 7,373.30 44239.7802

Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910, on 12 mm dia steel bar

conforming to IS: 1786, having minimum cross section as 23

mmx25 mm and over all minimum length 263 mm and width as

165 mm with minimum 112 mm space between protruded legs

having 2 mm tread on top surface by ribbing or chequering

besides necessary and adequate anchoring projections on tail

length on 138 mm as per standard drawing and suitable to with

stand the bend test and chemical resistance test as per

specifications and having manufacture’s permanent identification

mark to be visible even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size)

complete as per design. Each 27 592.63 16000.87797

Digitally signed by PRIYA

Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls,

floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand :

4 graded stone aggregate 20 mm nominal size) cement plastered

on both sides with cement mortar 1:3 (1 cement : 3 coarse sand),

finished with a floating coat of neat cement and making necessary

channels for the drain etc. complete :

39.1 19.21.1 MR 9.1 For pipes 100 to 250 mm diameter Each 2 867.42 1734.84927

40 MR 10 Constructing Brick masonry percolation pit 3m dia and 5m

deep with bricks of class designation 7.5 in cement mortar 1:6,

base concrete 1:4:8 below the brick wall, including cost of

necessary excavation in any type of soil, back filling as required

in 20cm thick layers, dewatering if any, shuttering and shoring

and disposal of surplus excavated material within 2 nos.

300mm dia borings to a depth of 9 metre (to be measured from

the bottom of the percolation pit), provisioning and fixing

160mm O.D. PVC pipes, tested to 6kg/sqcm, in each bore and

upto the height of 300mm above the RCC top slab. The PVC

pipe shall be slotted except 3.0 metres at the top and 3.0

metres below from the bottom of the percolation pit, which

shall be blind. Top of the PVC pipe shall be covered with PVC

Socket & plug. Each bore around the PVC pipe shall be filled

with pea gravels. The percolation pit shall be filled with river

stone/pebbles as shown in drawing. The top slab shall be

150mm thick with RCC M20 including nominal reinforcement

and 2 nos. of 560mm internal dia SFRC manhole covers

with frames conforming to IS:12592 -

(total weight of cover & frame shall not be less than 182 kg)

shall be provided in the top slab. PVC encased 12mm dia

steel bar Footrests shall be provided 300 centre to centre.

The above shall be provided all as specified and 300mm

dia RCC pipe for inlet and overflow as shown on drawings shall

be measured separately. Each 1 2,50,000 250000 -

41 MR 11 Material & labour for constructing Silt trap of size 1500mm x

3000mm x 2000mm deep in R.C.C. walls including necessary

excavation and foundation concrete 150mm thick in 1:4:8 (1

cement : 4 coarse sand : 8 graded stone aggregate of 40mm

nominal size), inside plaster 12mm thick in cement mortar 1:4

(1 cement : 4 coarse sand) finished with a floating coat of neat

cement, C.C. floor, RCC slab in mix 1:2:4 & RCC baffle wall

including reinforcement, centering & shuttering including

12mm dia steel bar footrests etc. and SFRC manhole cover and

frame of 610mm x 455mm internal dimension conforming to

IS: 12592 (total weight of cover & frame shall not be less

SUBHEAD V(External Water Supply) -

42 18.12 MR 1 Providing and fixing G.I. pipes complete with G.I. fittings including

trenching and refilling etc. -

External work -

43 18.40 MR 2 Painting G.I. pipes and fittings with two coats of anti-corrosive

bitumastic paint of approved quality : -

44 18.14 MR 3 Fixing water meter and stop cock in G.I. pipe line including

cutting and threading the pipe and making long screws etc.

complete (cost of water meter and stop cock to be paid

separately). Each 1 869.40 869.40469

45 18.37 MR 4 Constructing masonry Chamber 60x45x50 cm inside, in brick

work in cement mortar 1:4 (1 cement : 4 coarse sand) for water

meter complete with C.I. double flap surface box 400x200x200

mm (inside) with locking arrangement and RCC top slab 1:1.5:3

mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20

mm nominal size), including necessary excavation, foundation

concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone

aggregate 40 mm nominal size) and inside plastering with cement

mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a

floating coat of neat cement complete as per standard design :

Digitally signed by PRIYA

Name of Project : Community Center,Bokaro

Name of Work : FIRE FIGHTING WORK

S.I MR DSR 2022 DSR 2022 MR

Description of Item Unit Total Qty

No Item No Item No Rate Amount Rate Amount

SUBHEAD I:FIRE HYDRANT SYSTEM

Supplying, installation, testing and commissioning of electric

driven terrace pump suitable for automatic operation and

consisting of following, complete in all respects, as required:

Horizontal type, multistage, centrifugal, split casing pump of

cast iron body & bronze impeller with stainless steel shaft,

mechanical confirming to IS : 1520

Suitable HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55

class of protection for enclosure, horiziontal foot mounted

type with Class-'F' insulation, conforming to IS-325

M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc.as required.

Suitable cement concrete foundation duly plastered and with

anti vibration pads

Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

2 MR 2 18.7 gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint

of required shade complete as required : -

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia

3 MR 3 18.9 with cast iron wheel ISI marked conforming to IS 5290 (Type -

A) with blank Gunmetal/Stainless teel cap and chain as

3.1 MR 3.1 18.9.1 Single Headed Gunmetal Each 2 8,183.51 16367.0276

Supplying, fixing, testing and commissioning of butterfly valve

of PN 1.6 rating with bronze/gunmetal seat duly ISI conforming

to IS 13095 of following sizes as required :

Providing, installation, testing and commissioning of non-

return valve of following sizes confirming to IS: 5312 complete

with rubber gasket, GI bolts, nuts,washers etc.as required :.

Providing, installation, testing and commissioning of stainless

steel Y-strainer fabricated out of 1.6 mm thick stainless steel,

Grade 304, sheet with 3 mm dia

holes with stainless steel flange. -

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with

63 mm dia male and female couplings duly bound with GI wire,

rivets etc. conforming to IS 636 (type-A) as required:

Digitally signed by PRIYA

Supplying and Fixing First Aid Hose Reel, wall mounting

swinging type complete with drum & bracket of MS

8 MR 8 18.17 construction, spray painted in Post office Red, confirming to IS

884/1995 with upto date amendments, complete with the

following as required. -

20 mm nominal internal dia as per IS 12585 water hose

thermoplastic (Textile reinforced)Type II as per IS: 12585 -

20 mm dia. ball valve & nozzle. -

Drum and brackets for fixing the equipments on wall. -

Connection from riser with 25 mm dia gun metal stop valve

and M.S pipe as reqd. -

Supplying & fixing 63 mm dia gun metal short branch pipe with

20 mm nominal internal diameter size nozzle conforming to IS

903 suitable for instantaneous connection to interconnect

hose pipe coupling as required: -

Supplying and fixing orifice plate made out of 6 mm thick

stainless steel(Grade 304) with orifice of required size to be

10 MR 10 18.13 fitted between flange &landing valve of external and internal

hydrants to reduce presure at the outlet to the level of 3.5

kg/sq.cm complete as required. Each 2 1,413.87 2827.7326

Supplying and fixing air vessel made of 250 mm dia, 8 mm

thick MS sheet, 1200 mm in height with air release valve on

top and flanged connection to riser, drain arrangement with

25 mo dia gun metal wheel valve with required accessories,

pressure gauge and painting with synthetic enamel paint of

approved shade as required. Each 1 19,526.55 19526.5532

Providing and fixing standard fire man's axe with heavy duty

insulated rubber handle. Each 2 - 846.00 1692

Providing and fixing fire hose cabinet fabricated from 16 gauge

M.S. Sheet with single or double glazed front door (with 4 mm

13 MR 13 thick glass) and locking arrangement, painted fire red with

stove enamelled paint "FIRE HOSE" written on front including

necessary supports approximate size. -

Providing and fixing dial type pressure gauge with isolation

cock and pipe at hydrant station. -

14.1 MR 14.1 Diameter 100 mm calibration 0-8 Kg. Each 2 - 760.00 1520

Providing and fixing CO2 type fire extinguishers with steel

cylinder with a discharge valve and conforming to IS:15683.

15 MR 15 Extinguishers shall be painted with rex enamel paint and fixed

to wall with brackets capacity 4.5 Kg.

Providing and fixing ABC powder type fire extinguisher

suitable for inverted operation and fabricated from 1.6 mm

M.S. sheet internally protected with anticorrosive treatment

and hydraulically tested to a pressure of 25 Kg/Sqcm.

16 MR 16 Extinguishers externally painted with red enamel and fixed to

wall with brackets complete with internal charge and spanner

(Conforming to IS:15683 capaicity 6 KG.).

Digitally signed by PRIYA

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

(SCHEDULE OF QUANTITIES)

NAME OF WORK: Estimate For Providing Electrical Works For Bokaro Community Centre Building

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

A SCHEDULE ITEMS

WIRING AND SUB MAINS

Wiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed

1 1.3.3 heavy class Steel conduit, with modular switch, Point 132 1,974.70 260660.86

modular plate, suitable GI box and earthing the point

with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.a) Group C

Wiring for twin control light point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in

surface / recessed Steel conduit, 2 way modular

switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required

Wiring for light/ power plug with 2X4 sq. mm FRLS

PVC insulated copper conductor single core cable in

3 1.5 surface/ recessed Steel conduit alongwith 1 No 4 sq. Point 725 463.44 335993.93

mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required

Wiring for light/ power plug with 4X4 sq. mm FRLS

PVC insulated copper conductor single core cable in

4 1.6 surface/ recessed Steel conduit alongwith 2 Nos 4 sq. metre 10 708.54 7085.39

mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire

with the following sizes of FRLS PVC insulated copper

conductor, single core cable in surface/ recessed Steel

conduit as required.

a 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire metre 600 394.94 236964.42

b 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire metre 5 458.09 2290.44

b 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire metre 5 630.41 3152.03

d 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire metre 5 759.91 3799.57

e 1.7.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire metre 90 988.96 89006.15

f 1.7.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire metre 35 1,247.97 43678.94

g 1.7.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire metre 5 1,760.64 8803.22

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess,

including providing and fixing 3 pin 5/6 amps modular

socket outlet and 5/6 amps modular switch,

connection etc. as required. (For light plugs to be used

in non residential buildings).

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess,

7 1.32 including providing and fixing 6 pin 15/16 amps Each 25 627.20 15679.90

modular socket outlet and 15/16 amps modular switch,

connection etc. as required.

Supplying and fixing of following modular switch/

socket outlet on the existing Modular plate & switch

including connection but excluding modular plate etc.

b 1.24.4 3 pin 5/6 amp socket outlet Each 14 130.58 1828.07

d 1.24.5 6 pin 15/16 amp socket outlet Each 1 210.85 210.85

e 25 amp switch Each 4 214.06 856.24

Supplying and fixing following size/ modules, GI box

Boxes alongwith modular base & cover plate for

modular switches in recess etc as required.

a 1.27.1 1 or 2 Module (75mmX75mm) Each 2 318.95 637.90

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

10 2.18 Supplying and fixing 20 amps, 240 volts, SPN

industrial type, socket outlet, with 2 pole and earth,

metal enclosed plug top along with 20 amps "C"

curve, SP, MCB, in sheet steel enclosure, on Each 2 1,734.96 3469.91

surface or in recess, with chained metal cover for the

socket out let and complete with connections, testing

and commissioning etc. as required.

11 1.25 Supplying and fixing stepped fan regulator on the

existing modular plate switch box including

connections but excluding modular plate etc. as

12 Supplying and fixing of 16 SWG M.S. Fan Box 12.5"

Rod but without fan cover (hylam sheet). as required. Nos. 3 214.06 642.18

13 Supplying and fixing of fan cover (hylam sheet).on the

existing Fan Box as required.

14 Supplying and fixing of modular Blanking plate on the

1.26 existing modular plate & switch box excluding modular Each 35 42.81 1498.42

plate etc. as reqd.

TELEPHONE / TV -

15 1.24 Supply and fixing following modular switch/socket on

the existing modular plate and cover plate & switch

box including connections but excluding modular plate

etc. as required.

a 1.24.6 Telephone socket outlet. (RJ - 11) Each 6 158.40 950.43

b 1.24.7 TV antenna socket outlet Each 1 158.40 158.40

16 1.27 Supplying and fixing following size/modules, GI box

along with modular base and cover plate for modular -

switches in recess etc as required.

18 1.18 Supplying and drawing following pair, 0.5 sq.mm FR

PVC insulated copper conductor, unarmoured

telephone cable in the existing surface / recessed steel

/ PVC conduit as required.

19 1.27.1 Supply, laying, testing and commissioning of the

following co-axial PVC insulated conductor cable in

existing surface / recessed conduit etc. and including -

making terminal joints, complete as required.

20 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN

Cable in the existing surface/ recessed Steel/ PVC -

conduit/ raceway as required.

a 1.53.1 1 run of cable Metre 150 61.01 9151.07

b 1.53.2 2 run of cable Metre 60 102.75 6164.93

c 3 run of cable Metre 85 143.42 12190.72

Supplying and fixing of following sizes of steel conduit

along with accessories in surface/recess including

21 1.2 painting in case of surface conduit, or cutting the wall -

and making good the same in case of recessed

conduit as required.

Supplying and fixing of following sizes of heavy class

PVC conduit along with accessories in surface/recess

including cutting the wall and making good the same in

case of recessed conduit as required.

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

DISTRIBUTION BOARDS -

Supplying and fixing following way, Horizontal type

three pole and neutral, sheet steel, MCB distribution

board, 415 volts, on surface/recess, complete with

tinned copper bus bar, neutral bus bar,

interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

a 2.4.1 4 way (4 + 12), Double door, Horizontal Each 1 4,378.60 4378.60

b 2.4.2 6 way (4 + 18), Double door, Horizontal Each 2 5,323.67 10647.34

c 2.4.3 8 way (4 + 24), Double door, Horizontal Each 1 6,386.48 6386.48

Supplying and fixing following way, Horizontal type

three pole and neutral, sheet steel, MCB distribution

board, 240 volts, on surface/recess, complete with

tinned copper bus bar, neutral bus bar,

interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

a 2.3.3 12 way, Double door Set 1 2,477.74 2477.74

b 2.3.4 16 way, Double door Each 1 3,361.81 3361.81

Supplying and fixing following rating, four pole, 415

volts, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as

Supplying and fixing following rating, double pole, 240

V,isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as

Supplying and fixing following rating, double pole,

(single phase and neutral), 240 volts, residual current

circuit breaker (RCCB), having a sensitivity current

upto 30 milliamperes in the existing MCB DB complete

with connections, testing and commissioning etc. as

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10

kA, "C" curve, miniature circuit breaker suitable for

28 2.10 inductive load of following poles in the existing MCB -

DB complete with connections, testing and

commissioning etc. as required.

a 2.10.1 Single pole Each 102 274.00 27947.67

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

ERRECTION OF FAN & FIXTURE -

Installation ,Testing, Commissioning of wall bracket

fittings of all sizes and shapes including LED lamps

per fitting, complete with all accessories including

connections etc. as required.

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting /

LED Fittings of all types, with all accessories

31 1.41 and tube etc. directly on ceiling/ wall, including each 50 220.48 11024.09

connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc. as

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting /

LED Fittings of all types and shape, with all

32 accessories and tube etc. on falsceiling including each 65 267.58 17392.38

connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc. as

Supply, Installation, Testing and Commissioning of

1200 mm sweep, BEE 5 star rated, ceiling fan with

Brush Less Direct Current (BLDC) Motor, class of

insulation: B, 3 nos. blades, 30 cm long down rod, 2

nos. canopies, shackle kit, safety rope, copper

winding, Power Factor

not less than 0.9, Service Value (CM/M/W) minimum

6.00, Air delivery minimum 210 Cum/Min , 350 RPM

(tolerance as per IS : 374-2019), THD less than 10%,

remote or electronic regulator unit for speed control

and all remaining accessories including safety pin, nut

washers, temperature rise=75 degree C (max.),

insulation resistance more than 2 mega ohm, suitable

for 230 V, 50 Hz, single phase AC Supply, earthing

etc. complete as required.

Installation of exhaust fan in the existing opening,

34 1.5 including making good the damage, connection, -

testing, commissioning etc. as required.

a 1.50.1 Upto 450 mm sweep each 2 481.64 963.27

Extra for fixing the louvers/ shutters complete with

frame for a exhaust fan of all sizes.

EARTHING & LIGHTNING ARRESTER -

Earthing with G.I. earth pipe 4.5 metre long, 40 mm

dia including accessories, and providing masonry

enclosure with cover plate having locking arrangement

and watering pipe etc. with charcoal/coke and salt as

Earthing with G.I. earth plate 600 mm X 600 mm X 6

including accessories, and providing masonry

cover plate having locking arrangement and watering

2.7 metre long etc. with charcoal/ coke and salt as

Earthing with copper earth plate 600 mm X 600 mm X

thick including accessories, and providing masonry

with cover plate having locking arrangement and

of 2.7 metre long etc. with charcoal/ coke and salt as

Providing and fixing 32 mm X 6 mm G.I. strip on

surface or in recess for connections etc. as required.

Providing and fixing 32 mm X 6 mm Copper. strip on

surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on

surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm Copper. strip on

surface or in recess for connections etc. as required.

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

5.18 Providing and fixing 6 SWG dia G.I. wire on surface or

in recess for loop earthing along with existing surface/

recessed conduit/ submain wiring/ cable as required

6.2 Providing and fixing of lightning conductor finial, made

of 25 mm dia 300 mm long, G.I. tube, having single

44 prong at top, with 85 mm dia 6 mm thick G.I. base Nos. 1 554.42 554.42

plate including holes etc. complete as required.

6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on

parapet or on surface of wall for lightning conductor

and external lighting complete as required. (For

Horizontal run)

6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on

46 parapet or on surface of wall for lightning conductor Mtr 35 210.85 7379.72

complete as required. (For vertical run)

6.12 Providing and fixing testing joint, made of 20 mm X 3

mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I.

bolts, nuts, chuck nuts and spring washers etc.

complete as required.

INTELLIGENT FIRE DETECTION AND ALARM SYSTEM - -

17.2.1 Supplying, installation, testing and commissioning of

micro processor based intelligent addressable main

fire alarm panel, central processing unit with the

following loop modules and capable of supporting not

less than 240 devices (including detectors) and

minimum 120 detectors per loop and loop length up to

2 km, network communication card, minimum 320

character graphics/ LCD display with touch screen or

other keypad and minimum 4000 events history log

in the non volatile memory (EPROM), power supply

unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt

maintenance free batteries with automatic charger.

panel shall have facility to connect printer to printout

log and facility to have seamless integration with

analog/digital voice evacuation system (which is part

of the schedule of work under SH: PA System) and

shall be complete with all accessories . The panel shall

be compatible for IBMS system with open protocol

BACnet/ Modbus over IP complete as per

17.2.2 Supplying, installation, testing & commissioning of

central graphical fire alarm management system to

centrally monitor and operate the fire alarm system

complete as required.

17.2.3 Supplying, installation, testing & commissioning of

repeater panel wih 320 character/ Touch screen LCD

display with inbuilt reset, acknowledge and silence

switches complete as required.

17.2.9 Supplying, installation, testing & commissioning of

intelligent addressable thermal detector with rate of

rise cum fixed tempreature thermistor complete with

base as required.

17.2.4 Supplying, installation, testing & commissioning of

intelligent analog addressable photothermal detector

complete with mounting base complete as required.

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

17.2.13 Supplying, installation, testing & commissioning of

intelligent addressable duct detector including suitable

Photo detector complete with base as required

17.2.12 Supplying, installation, testing & commissioning of

addressable beam detector with short circuit isolator

54 (inbuilt or seperate) complete with emitter and receiver Each 2 80,205.07 160410.14

including connections with remote test features etc

complete as required.

17.2.5 Supplying, installation, testing & commissioning of

response indicator on surface/recessed MS Box

having two LED, metallic cover complete with all

connections etc as required.

17.2.14 Supplying, installation, testing & commissioning of

56 addressable manual call point complete as required. Each 5 4,143.13 20715.66

17.2.15 Supplying, installation, testing & commissioning of

addressable horn cum strobe complete as required.

17.2.7 Supplying, installation, testing & commissioning of fault

58 isolator complete with base as required. Each 2 3,499.88 6999.76

17.2.10 Supplying, installation, testing & commissioning of

59 addressable fire control module complete as required Each 2 3,214.11 6428.22

17.2.11 Supplying, installation, testing & commissioning of

60 addressable phone control module complete as Each 1 3,496.67 3496.67

17.2.17 Supplying, installation, testing & commissioning of fire

fighter telephone handset complete as required.

17.5.2 Supplying & laying of 2x1.5 sqmm fire alarm armoured

cable, 600/1000V rated with annealed copper

62 conductor having XLPE insulation, steel wire Each 300 185.16 55548.57

armouring & FRLS outer sheath complete as required.

Cable End Termination & Pipes -

Supplying and making ends termination with brass

compression glands and aluminium lugs for following

63 size of PVC insulated PVC sheathed -

aluminiumconductor cable of 1.1 KV grade as required

Providing, laying and jointing PVC/RCC NP-2 pipe with

Vin stiff mixture of cement mortar in the proportion of

1:2 (1 cement:2 fine sand) including trenching

(75 cm deep / or as required) i/c testing the joints etc.

in loose soil/under the flooring (before laying the

finished flooring) for electrical cable entrance to the

building complete as required i/c excavation and

refilling of earth.

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supplying and laying of following size DWC HDPE

pipe ISI marked along with all accessories like socket,

bend, couplers etc. conforming to IS 14930, Part II

complete with fitting and cutting, jointing etc.direct in

ground (75 cm below ground level) including

excavation and refilling the trench but excluding sand

cushioning and protective covering etc., complete as

a 14.16.1 63 mm dia (OD-63 mm & ID-51 mm nominal) metre 100 264.36 26436.41

b 14.16.2 90 mm dia (OD-90 mm & ID-76 mm nominal) metre 5 310.39 1551.94

c 14.16.3 120 mm dia (OD-120 mm & ID-103 mm nominal) metre 5 393.87 1969.35

d 14.16.4 160 mm dia (OD-160 mm & ID-135 mm nominal) metre 80 514.81 41185.14

e 14.16.5 200 mm dia (OD-200 mm & ID-175 mm nominal) metre 5 714.96 3574.80

B NON SCHEDULE ITEMS

DATA /TELEPHONE / TV

Supply and fixing following modular switch/socket on

the existing modular plate and cover plate & switch

box including connections but excluding modular plate

etc. as required.

Information Socket Outlet RJ -45 suitable for CAT 6

Supplying, Installation, testing and commissioning of

following sizes of telephone distribution board in M.S.

67 hinged type box duly painted complete with Krone type

tag block etc. including terminations of cable as

Supplying, Installation, testing and commissioning of

following sizes of 0.5 mm dia annealed tinned copper

68 conductor PVC insulated and PVC sheathed

unarmoured telephone cable on surface/ existing cable

tray complete as required.

b 5 Pair main cable Metre 100 30.00 3000.00

Supply installation testing and commissioning of PBX

system Equipped with 02 Trunk Lines, 20 Extensions,

With built in Auto Attendant,With Built in Caller ID Card

69 for 2 Trunks with all standard accessories software Each 1 35000.00 35000.00

and hardware for proper functioning as required,of

Supplying and fixing following way, Horizontal type

three pole and neutral, sheet steel, MCB distribution

board, 415 volts, on surface/recess, complete with

tinned copper bus bar, neutral bus bar,

interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

a 12 way (4 + 36), Double door, Horizontal Each 1 7826.00 7826.00

SITC of light fixtures suitable for LED fixture, lamps

with all components and accessories including but not

restricted to reflectors, housings, lamp holders and

including cost of ballasts and cost of lamps complete

as required and as below Make:-Bajaj,Havells,Polycab

42Watt LED (600X600MM) of Havells Cat Ref:

a VENUSNEOHE2X2PLR18-42WLED830MOD or Nos. 19 5557.00 105583.00

18Watt LED DOWNLIGHTER of Havells Cat Ref:

VIBEFLRDDLR18WLED830S or equivalent.

15Watt LED DOWNLIGHTER of Havells Cat Ref:

VIBEFLRDDLR18WLED830S or equivalent.

d 18W LED WALL BRACKET LIGHT Nos. 4 2315.00 9260.00

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

20W LED TUBE LIGHT of Havells Cat Ref:

f LUMILINESMART20WLED865PCWH or equivalent. Nos. 25 1852.00 46300.00

15W Mirror Light of Havells Cat Ref:

LUMILINEXS17WLED865SPCWH or equivalent.

25Watt LED (300X300MM) of Havells Cat Ref:

a INTEGRANXTSQDLRSURD24WLED865S or Nos. 32 2130.00 68160.00

10W LED Bulk Head of Havells Cat Ref:

HEXAFT10WLED857SSYMBOPC or equivalent.

g 5W EXIT LIGHT with 1 hr battery backup Nos. 6 4844.00 29064.00

5W STEP LIGHT of Havells Cat Ref:

h RADIANTFTR07WLED830PSYMTOPC or equivalent. Nos. 10 3334.00 33340.00

600 MM INDUSTRIAL WALL AIRCIRCULATING FAN

Supplying of under note sizes of heavy duty exhaust

fans complete with fan motor, blades fixing frame,

72 louver etc as required of havells makes or equivalent.

450 mm exhaust fan 900 RPM Each 4 2968.00 11872.00

Supply, installation, testing and commissioning of 15

kVA,3 Phase input and 3 Phase output UPS

alongwith lead acid batteries giving a back up of min.

30 min. at full load as per specification alongwith all

accessories including interconnecting cables, lugs,

Base Frames, Battery Rack & Battery Circuit breaker,

palral kit complete as required.Make:

Delta/APC/Autometer

The BOQ shall be read in conjunction with general

notes, specification and equipment schedule and

single line diagram.

Supply and installation of the following cubical type

panels ( Partial Type tested ) made of 14 gauge

CRCA structure, base channel, doors & partitions

complete with, Air Circuit Breaker, moulded case

circuit breakers, meters, indicating lamps, current

transformer etc. Complete in all respects, insulated

bus bars with heat shrinkable PVC sleeve in suitable

bus chambers, interconnection, small wiring, name

plate, danger plate, earth bus etc. & comprising of

compartments with hinged door for each feeder & its

accessories, cable alley with hinged doors, bus

chamber with bolted door etc. The panel being of dust

& vermin proof construction with rubber gasket,

attractively powder coated with Siemens grey shade

and having orange peel finish. The panel shall be free

standing type/ wall mounted type as per relevant

drawing, Equipment schedule, specifications including

all materials, accessories, loose supplied items, etc.

required for completeness of the project majorly

comprising of following : -

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

ACB shall have a rated operational voltage of 415V

AC, rated insulation voltage of 1000 volts AC, rated

impulse voltage of 12kV.ACB shall be Moulded Case

design and shall comply with standards IS/IEC 60947-

1 & 2. with Ics = Icu = Icw (1sec) = 50kA.

Both fixed & draw-out circuit breakers shall have single

pole-pitch. ACBs upto 3200A shall be provided with

top horizontal and bottom vertical terminal adapters on

both sides for proper cable connections/bus duct

Shunt trip and closing coil (having common AC/DC

supply upto 250V) shall be continuous rated.

There Should be On, Off, Trip, Spring Charge and

Ready to close Indication lamp for all ACB on the

ACB trip unit shall be EMC/EMI tested and should

have a display for measurement of current and

voltage. It shall be possible to view last 5 trip cause on

trip unit. Separately powered, individual fault trip

indication LEDs (For O/L, S/C, E/F and trip unit failure)

shall be available on the trip unit which shall function

even if the display fails.All ACB shall be EMS

All MCCBS shall be with Extended type Front door

operating handle, Phase Spreaders & Phase Barriers

complying to IS/IEC 60947-1 & 2.

MCCBs shall be current limiting type preferably having

an encapsulated double break design, with rated

operational voltage (Ue) of 415V, insulation voltage

(Ui) of 690 V (AC 50/60 Hz) & impulse voltage (Uimp)

of not less than 8kV.

The electrical life of MCCBs shall be 8,000 operations

up to 250A & 4000 operations up to 630A and shall be

of single frame size upto 250A.Cable Termination on

MCCB should be done using circular lugs being fixed

with a bolt passing through.

For E/F in MCCBs wherever required , external

earthfault module with CBCT should be used with

indication lamp on the panel and fault sensitivity

selection from 20% – 60% In. and time delay selection

in case of Earth Fault from 0.5 to 3 Sec/

instantaneous.All incomer MCCB should be with E/F

protection also.There Should be On, Off, Trip, and

electrical fault trip Indication lamp for all MCCB on the

panel door. Separate fault differentiation indication

(LED) for Over current and Earth fault. Indication for

over current and earth fault tripping shall be extended

to the panel door via indication lamps..All MCCB shall

be EMS compitable.

All MCCBs of ratigs above 250A shall be

microprocessor based and upto 250A shall be

Thermal Magnetic Type and with Min 35 kA Rating .

ON, OFF, Trip and Ready to close status for each ACB

and ON, OFF Trip staus for all Incommer MCCB shall

be avilable on MODBUS.

Control Voltage for Closing / Tripping coils , Spring

charging motor & Indicting lamps in Manually /

Electrically operated ACB Feeder shall be 230 V AC/

Metering CTs burden shall be with suitable VA &

accuracy class .5

CTs shall be "CAST RESIN" type .

All indication lights shall be LED type.

All energy meter shall be "DIGITAL" type with Modbus

Protocol as per techncial Specification

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Panel Manufacturer should have Type Test

Certificates for Short Time withstand current test of

50KA for 1.0 Sec from CPRI. Bhopal / Bangalore.

Control SP MCB's of 2A Rating shall be provided for

each metering circuit.

20% spare control terminal to be provided.

Live parts shall not be accessible after opening the

door, Transparent acrylic sheet to be provided to cover

the same & busbar joints section shall be covered with

All bus bar shall be insulated with coloured PVC

Sleeve i.e. R, Y, B, BK as per colour code.

All internal control wiring shall be heat resistant type.

All TP/TPN feeders shall have solid isolable neutral

All starters shall be provided with Auto/ Manual

selector switch, MPCB/ MCCB/MCB, over load relay,

single phasing preventor, ON/OFF/ Trip/ Trip on

Eclectrical Fault indication lamps, ON/OFF push

Buttons, contractor and suitable No. of Potential free

contacts for remote / local operations, indication,

interlocking and Building Management system.

Current density for bus bar shall not be more than

0.8A/Sqmm. Rating of Bus bar is after considering all

derating factors. (Bus bar sizing calculation to be

submitted for approval.)

All TP/TPN feeders shall have solid isolable neutral

Bus couplers shall be provided with ON & OFF

indicating lights but without releases.

All feeders shall be provided with door interlocked with

door defeat, pad lock facility.

Spare contacts of Relays/Contactor etc. shall be wired

upto terminal block.

Degree of protection for following type of distribution

panel enclosure shall be as per IS:13947-1993.

IP 43 for indoor panels.

IP 55 for outdoor panels.

Contractor and panel builder shall have to submit the

GA drawing and get approval from consultant before

74 MAIN LT PANEL

1 No.200A, 4-pole MCCB

1 No80A, 4-pole MCCB

1 No.200A, 4-pole Contactor

1 No.80A, 4-pole Contactor

Metering & Indication:

Combined Ammeter/Voltmeter with Selector Switch

and 160/5A, CL-1, 10VA CTs and 2A control MCB.

Set of ON/OFF/Trip/Trip Circuit healthy/ready to close

Sets of phase indicating lamp with 2A control MCBs.

All incomer with buscoupler shall be mechanically and

electrically interlock.Consider all necessary software

and hardware for proper functioning of interlocking.It

shall operate auto on and auto off of breaker and then

300A, TPN aluminium, colour coded bus bars suitable

for 415V, 50Hz with fully rated neutral.(After deration)

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

1 Nos.80A, TPN MCCB

4 Nos.63A, TPN MCCB

8 Nos.40A, TPN MCCB

2 Nos.32A, DP MCCB

2 Nos.16A, DP MCCB

2 Nos. Bulb with holder

Panel shall be suitable for incoming & outgoing supply

with cables,and top / bottom entry as required.

Supply & Laying of 1.1KV grade multicore aluminium

conductor XLPE insulated and PVC sheathed

75 armoured cable conforming to IS : 7098 (Part-I) 1998

along walls/ on existing cable trays etc. in an

approved manner and as per follows;

Constructing Masonry chamber 60x60x75 cm (deep)

inside with 75 class designation FPS brick work in

cement mortar 1:4 (1 cement: 4 coarse sand) (for

cable entry) with 10 mm thick M.S. hinged cover plate

on top in 40 x 5 mm MS angle iron frame embedded in

C C 1:2:4 i/c necessary excavation and inside

plastering with cement mortar 1:3 (1 cement:3 fine

sand) finished with a floating coat of neat cement

complete as required and as per specifications

Constructing masonry chamber 60 cm x 45 cm x 50

cm (deep) inside with 75 class designation FPS brick

work in cement mortar 1:4 (1 cement : 3 coarse sand)

(for cable entry) with 10 mm thick M.S. hinged cover

plate on top in 40 x 40 x 5 mm MS angle iron frame

embedded in C C 1:2: 4i/c necessary excavation and

inside plastering with cement mortar 1:3 (1 cement:3

fine sand) finished with a floating coat of neat cement

complete as required and as per specifications

IP CCTV SURVEILLANCE SYSTEM

Supply installation Testing and Commissioing Fixed

Lens Outdoor Bullet Camera - Supplying, Installation,

testing & commissioning of 2MP H.265 NW IR vandal

proof bullet Camera, 0.03Lux (Color), 0Lux (B/W, IR

LED on), 2.8mm fixed lens, 30fps@2M all resolutions,

120dB WDR, H.265, H.264, MJPEG codec supported,

76 DELETED Triple stream , Inbuilt Analytics - Defocus detection, Each 0 32500.00 0.00

Directional detection, Motion detection, Enter/Exit,

Tampering, Virtual line, Audio in , alarm in & out, Micro

SD/SDHC/SDXC memory slot (Max. 128GB), IR

viewable length 20m, IP66, IK10, PoE, CE, FCC, UL,

NDAA complaint, Non-Chinese.

Pelco/ Mobotix/ Avigilon/ Axis / Hanwha

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Supply installation Testing and Commissioing Varifocal

Lens Outdoor Bullet Camera - Supplying, Installation,

testing & commissioning of 2MP H.265 NW IR vandal

proof bullet Camera, 0.03Lux (Color), 0Lux (B/W, IR

LED on), 3.2mm - 10mm Varifocal lens, 30fps@2M all

resolutions, 120dB WDR, H.265, H.264, MJPEG

77 DELETED codec supported, Triple stream , Inbuilt Analytics - Each 0 38500.00 0.00

Defocus detection, Directional detection, Motion

detection, Enter/Exit, Tampering, Virtual line, Audio in ,

alarm in & out, Micro SD/SDHC/SDXC memory slot

(Max. 128GB), IR viewable length 20m, IP66, IK10,

PoE, CE, FCC, UL, NDAA complaint, Non-Chinese.

Pelco/ Mobotix/ Avigilon/ Axis / Hanwha

Supply installation Testing and Commissioing Network

Video Recorder - Supplying, Installation, testing &

commissioning of 16CH NVR , Dual monitor video out

support, H.265, H.264, MJPEG compression support,

ONVIF support, 8 internal HDDs, i/c RJ45 connector i/c

connection etc, supports, N+1 failover, UL, BIS.

complete as required

Pelco/ Mobotix/ Avigilon/ Axis / Hanwha

Supply installation Testing and Commissioing of Client

79 DELETED Viewing Video Sofware. Lot 0 225000.00 0.00

Milestone/ Hanwha / Axis / Pelco

Supply, Installation, Testing and Commissioning of

Surveillance Hard disk - 6 TB Storage. Recording

80 DELETED parameter: 30 days of recording at FULL 1080p, 25fps Each 0 18500.00 0.00

H.264 compression, complete as required.

WD/ Seagate / Hitachi

Supply, Installation, Testing and Commissioning of

Client Desktop PC with Core i7 processor, 8GB RAM, |

TB HDD, Windows 64 bit OS, external DVD writer,

wireless leyboard, wireless mouse, 2GB Graphics card

with dual monitor support, complete with high quality 5

mtrs HDMI cables for connecting displays (2 displays

per unit), complete as required.

HP / Dell / Lenovo

Supply, Installation, Testing and Commissioning of 55"

or better 4K professional displays for 24x7 CCTV

application, complete as required.

LG / Samsung / Benq

Supply, Installation, Testing and Commissioning of

Layer II Smart Managed Gigabit Ethernet switch: 8

83 DELETED port RJ45 10/100/1000 T (POE), , complete as Each 0 19000.00 0.00

Netgear / Cisco / Dlink/Alt global

Supply, Installation and Commissioning of RJ-45 i/o

Jack with Plate & mounting Gang Box, complete as

84 DELETED Each 0 1250.00 0.00

Dlink/ Cisco / AMP / Molex/Legrand

Supply, Installation, Testing and Commissioning of

85 DELETED SFP modules (1G/10G), complete as required. Each 0 4500.00 0.00

Dlink/ Cisco / AMP / Molex

Supply, Installation, Testing and Commissioning of

Networking Rack of 16U along with PDU (With surge

86 DELETED protection), cable manager, fan etc for Switches & Each 0 25000.00 0.00

other accessories etc, complete as required.

Netrack / Valrack

AUDIO VISUAL AND STAGE LIGHTING

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Providing and fixing Line source: 2-way, MF - 15" HF -

1x 1.4", 90° x 50° (H x V), EasyFly rigging system

Frequency Response (-3 dB) 38 Hz - 18 kHz Nominal

Impedance 8 Ohms

Rated Power 750W Continuous, 3000 Peak LF Driver

87 DELETED 15" Drivers, 4" VC - Ferrite Maximum SPL 134 dB HF Pcs 0 221590.00 0.00

Driver 1.5" exit compression driver, 3" VC

Sensitivity 96 dB Crossover Frequency

2.1 kHz or Bi-amplified

Approved Makes - British Acoustics / Martin Audio

Providing and fixing 12" High Performance Passive

Speaker. Frequency Response (-3 dB): 40 Hz - 18

kHz. Frequency Range (-10 dB)

34 Hz - 20 kHz. Rated Power ; 625W Continuous,

2500 Peak. Maximum SPL : 132 dB. Sensitivity : 95

88 DELETED dB. Nominal Impedance : 8 Ohms. Crossover Pcs 0 208642.00 0.00

Frequency : 2.1 kHz or Bi-amplified. Height : 28",

14", Depth : 18", Weight : 23.1 Kgs.

Approved Makes - British Acoustics / Martin Audio

Providing and fixing Subwoofer: LF - 1x 18", Omni-

directional, Cardoid Presets available, Stackable

Frequency Response (-3 dB) 34 Hz - 140 Hz Nominal

Impedance 8 Ohms

Enclosure Marine Birchwood Cabinet, Premium Grade

Frequency Range (-10 dB) 28 Hz - 140 Hz Coverage

Pattern Omni-directional

Grill Perforated Stainless Steel Grill backed by

acoustically transparent foam over a stainless steel

mesh Width 37.5" Rated Power 1000W Continuous,

LF Driver 18" Ultra Low Excursion ADR Drivers, 4" VC -

Ferrite Finish British Acoustics' Signature Brown Finish

Depth 29.3" Maximum SPL 137 dB Inputs

2 x Speak-on Connectors, Wired Parallel

Approved Makes - British Acoustics / Martin Audio

Providing and fixing Loudspeaker Processor, 4-in 8-out

Matrix & Controller. are equipped with a state-of-the-art

32-bit Floating Point DSP, ensuring pristine signal

processing with exceptional accuracy and dynamic

range. With 200 milliseconds of delay capability, you

have precise control over time alignment and phase

adjustments for seamless audio integration.

Approved Makes - British Acoustics / Martin Audio

Providing and fixing 2 Channel Amplifier, 2100 Watts

@ 4 ohms, 1200 watts @ 8 ohms, 4200 watts @ 8

ohms bridge, Sensitivity - 1.4V, Signal to Noise Ratio

91 DELETED (below rated 1 kHz power at 8 ohms) - 103 dB (A- Pcs 0 233234.00 0.00

weighted), THD - < 0.5%

Approved Makes - British Acoustics / Martin Audio

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Providing and fixing Powered 1 x 12 inch stage

monitor, Frequency Response: 50 Hz - 18 kHz,

Continuous SPL: 128 dB/1m, Continuous Power

Handling: 400 Watt, Maximum Power Handling: 800

Watt program / 1600 Watt peak, Dispersion Nominal:

80° x 60° (hor. x vert.), rotable horn or better

Approved Makes - British Acoustics / Martin Audio

Providing and fixing Speaker Brackets : For Hanging

arrangement of Speaker complete in all respect as

93 DELETED specified or indicated including testing on completion. Pcs 0 3658.00 0.00

Approved Makes - British Acoustics / Martin Audio

/Meyer Sound / Custom

Providing and fixing of Dressing Room Speaker ( Make

& Female ): Frequency range (-10dB) : 80Hz - 20kHz ,

Nominal coverage : H(90) X V (90 ) , Components :

6.5"(160mm) cone driver , 1"(25mm) balanced dome

tweeter , Power rating : PGM 50W , Nominal

impedance : 8Ω / 15W, 7.5W, 3.8W , SPL : 110dB

SPL (100W), complete in all respect as specified or

indicated including testing on completion.

Approved Makes - British Acoustics / Martin Audio

Providing and fixing of Power amplifier for Dressing

Room Speakers : Output power : 1kHz (THD+N=1%:

3Ωm /4Ω) : 30W x 2 (20ms Burst) , High impedance:

100V line : 60W x 1 , Total harmonic distortion : ≤

0.1% (Line in to Speaker out 1kHz, 15W,3Ω/4Ω), ≤

0.2% (Line in to Speaker out 1kHz, 30W, 70V/100V)

95 DELETED ,Frequency response : 0dB, -3.0dB, +1.0dB (Line in to Pcs 0 168672.00 0.00

Speaker out,50Hz to 20kHz, 1W, 3Ω/4Ω), 0dB, -3.0dB,

+1.0dB (Line in to Speaker out, 90Hz to 20kHz, 1W,

70V/100V), complete in all respect as specified or

indicated including testing on completion.

Approved Makes - British Acoustics / Martin Audio

Providing and fixing 32 Channel Live Mixing Console

No of Input Channels Total 32 (28 Mono + 2 Stereo)

-10 dB to +60 dBu (including Pad), No of Output

Channels Master (L/R), 4 Groups, 3 Auxes & Phones

Frequency Response 20 Hz - 20 kHz (3 dB Phantom

Power +48V on individual channels with a central

Approved Makes - British Acoustics / Martin Audio

Providing Wired Microphone : Microphone Unit

Dynamic ; PolarPattern Unidirectional ; Frequency

Response 40 Hz–15 kHz ; Sensitivity (2.83 V/1 m) -

54dB ±3dB (0 dB=1V/Pa at 1 kHz) ; Output Impedance

97 DELETED 500 ohms ±30% (at 1 kHz) ; Connector 3 pin XLR-M Pcs 0 25764.00 0.00

type ; Cable Φ6mm x 5m cable with XLR-F type

connector and6.3mm plug, complete in all respect as

specified or indicatedincluding testing on completion

Approved Makes - OSL/Sennheiser/Shure

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Providing Handheld wireless microphone : Wirless

Handheld UHF true diversity wireless system, cpl. with

NE 600 S and SDM 669, PLL, pilot tone, ACT/SCAN-

function, 16 preprogrammed frequencies, incl.

softcase, batteries, rack mount brackets, MKV 11 and

switching power supply complete in all respect as

specified or indicated including testing on completion.

Approved Makes - OSL/Sennheiser/Shure

Providing Lapel microphone : Wireless Lapel UHF true

diversity wireless system, cpl. with NE 600 S, TS 601

and TG L55c lavalier microphone, PLL, pilot tone,

ACT/SCAN-function, 16 pre- programmed frequencies,

incl. softcase, batteries, rack mount brackets and

switching power supply complete in all respect as

specified or indicated including testing on completion.

Approved Makes - OSL/Sennheiser/Shure

Providing of Gooseneck microphone: Condenser

gooseneck mic (cardioid), black, length 500 mm (20''),

two flexible segments, 3-pin XLR male, with

100 DELETED preamplifier, windscreen included. Complete in all Pcs 0 33462.00 0.00

respect as specified or indicated including testing on

Approved Makes - OSL/Sennheiser/Shure

Providing & laying Speaker Cable : Cable with

thickness of 2 Core 2.5 Sqmm including conduit

101 DELETED complete in all respect as specified or indicated Mtr. 0 172.00 0.00

including testing on completion.

Approved Makes - NETMAS/Krystals/KRAMER

Providing & laying Microphone Cable : Cable with

thickness of 2 Core 1.5 Sqmm including conduit

102 DELETED complete in all respect as specified or indicated Mtr. 0 152.00 0.00

including testing on completion.

Approved Makes - NETMAS/Krystals/KRAMER

Mic Stand Big -

Approved Makes - G.S./Acoustika/NETMAS

Mic Stand Small -

Approved Makes - G.S./Acoustika/NETMAS

Providing & laying snake Cable : Snake Cable 24/22

AWG 16Pair stranded (7x32) TC conductor, polyolefin

insulation, individually shielded Beldfoil® (100%

105 DELETED coverage) numbered/color-coded PVC jackets, jackets Mtr. 0 988.00 0.00

and shields bonded to strip simultaneously, overall

Beldfoil shield and 24 AWG TC drain wire.

Approved Makes - NETMAS/Krystals/KRAMER

Providing and fixing of Stage Box for mics connectivity -

Approved Makes - Krystals / Acoustika/NETMAS

Providing and fixing of interconnectivity Connectors lot

107 DELETED make- Nos. 0 64900.00 0.00

Approved Makes - Krystals / Acoustika/Neutric

Providing and fixing of Network Rack custom -

Approved Makes - custom/Dell / Netrack

DELETED VIDEO SYSTEM

Providing and fixing of 6,000 lumen* laser projector

with fixed lans Beautifully slim, light and stylish, the

VPL-PHZ60 laser projector combines outstanding

picture performance with impressive 6,000 lumen*

109 DELETED image brightness and dependable reliability. With Nos. 0 493830.00 0.00

discreet blend-in styling, minimal maintenance needs

and flexible installation options,Number of

Pixels6,912,000 (1920 x 1200 x 3) pixels

Approved Makes - JV / Barco /Sony

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

Providing and fixing of Motorized tab tenion screen

with remote control size 144" x 90" diagonal 170" aprx.

aspect ration 16:10

Approved Makes - AGT / Grandview / elite/Suvera

Providing and fixing of Hanging arrangement for

screen Make- Custom

Providing and fixing of Wallplate Transmitter over Cat

6( HDBaseT) upto 70 meter with Inputs 1 HDMI, 1

USB-C & 1 Cat6 (HDBaseT) Output, 2K and 4K

support, HDCP 1.4 & 2.3 both Compliant, Up to 60W

USB–C charging on USB-C input, PoE acceptor,

112 DELETED stereo audio output, 1 RS-232 for device control & 1 Nos. 0 148018.00 0.00

RS232 for serial link extension over HDBaseT output,

Safety Regularity Compliance : CE, RoHs and WEEE,

ISO 9001, ISO 14001, ISO 27001:2013 etc complete

Approved Make- Kramer / Milestone

Providing and fixing of HDMI Receiver over Cat 6 (

HDBaseT) up to 70m with Inputs 1 Cat6 (HDBaseT), 1

HDMI Output, 2K and 4K support, HDTV Compatible,

113 DELETED HDCP 2.2 Compliant with IR and RS-232, Compliance Nos. 0 68734.00 0.00

: CE, ISO 9001, ISO 14001, OHSAS 18001, etc

complete as required.

Approved Make- Kramer / Milestone

Providing and fixing of Transmitter over Cat 6 (

HDBaseT) up to 70m with Input 1 HDMI, 1 Cat6

(HDBaseT) Output, 2K and 4K support, HDTV

114 DELETED Compatible, HDCP 2.2 Compliant with IR and RS-232, Nos. 0 68734.00 0.00

Compliance : CE, ISO 9001, ISO 14001, OHSAS

18001, etc complete as required.

Approved Make- Kramer / Milestone

Providing and fixing of 4K@60Hz 4:4:4 Switcher 4

HDMI inputs, 1 HDMI Output with de-embedded

analog audio, 2K and 4K support, Min. data rate data

rate of 17.82Gbps, HDTV Compatible, HDCP 2.2 &

115 DELETED HDR10 Compliant, Automatic Switching, 1 Nos 0 101171.00 0.00

Unbalanced Stereo Audio: On a 3.5mm mini jack,

Controllable through contact closure switches, etc

complete as required. Approved Make- Kramer /

Providing and fixing of HDMI cable 4-5 pieces One

116 DELETED Meter to Two Meter HDMI & Cat 6 cable, Approved Lot 0 7670.00 0.00

Make- Kramer / Milestone

DELETED STAGE LIGHTING

SITC of LED par 54 x 3 RGBW indoor Light source :

54PCS 3W LEDs(R12 G12 B12 W18) Lens angle :

25º(30º, 45º, 60º optional) Channel mode : 3 / 4 / 6 / 7

/ 9DMX channel mode 0-100% linear dimmer Function

: color mix, automatic color change, built-in program

and strobe effect with adjustable speed Sound

controlled via built-in microphone

Adjustable sound sensitivity LED Display, easy to

control Control : auto, sound active, DMX512,

software(connect to computer) Overheating protection

Voltage : 100-220V,50/60hz Power : 180W

Make PLS/ DL&MC/Robe

SITC of PC spot 200 watt original citizen led lamp

flicker free led light source 1 Pc. 200 watt COB LED

(WWCW) zoom DMX control lamp average life time

50,000 hours DMX channel 2/3/4 channel control

mode DMX 512 software (connect to computor)

manual control dimmer 100% linearly adjustable

strobe 0 - 25 FPS angle 15 to 50 digree

Make PLS/ DL&MC/Robe

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

SITC of Profile light LED 200W PROFILE WITH

PLASTIC HOUSING (26 DEGREE)Lux@2m 11000

Lux Lux@4m 2700 Lux Lux@6m 1190 Lux Lux@8m

LED Qty 1pcs of 200W LED Drive current 5A Color

temperature 3200K (warm White)

On-board Control Four Display Control Protocol

DMX512 CRI 80 Channel Mode 1CHs Dimmer

0~100% Beam Angle 26º (19ºOptional)

Make PLS/ DL&MC/Robe

SITC of 24x 12 RGBW Light source : 24PCS 12W 4 IN

1 LEDs Lens angle : 25º(30º, 45º, 60º optional)

Channel mode : 3 / 4 / 6 / 7 / 9DMX channel mode

0-100% linear dimmer Function : color mix, automatic

color change, built-in program and strobe effect with

adjustable speed Sound controlled via built-in

Adjustable sound sensitivity LED Display, easy to

control Control : auto, sound active, DMX512,

software(connect to computer) Overheating protection

Voltage : 100-220V,50/60hz Power : 300W

Make PLS/ DL&MC/Robe

SITC of Fresnel light 150w COB LED Drive Current 5A

Color Temperature 3200k

CRI 97 Input Voltage 100-240VAC Power 160W on-

board Four digital display Control Protocol DMX512

DMX Channel 2Chs Dimmer 0-100% lux@2m

(Minimum facula) - 7500 Lux @4m (Minimum facula) -

2130 Lux lux@6m (Minimum facula) - 970 Lux

lux@8m (Minimum facula) - 550 Lux lux@2m

(Minimum facula) - 217 Lux lux@4m (Minimum facula) -

578 Lux lux@6m (Minimum facula) - 270 Lux lux@8m

(Minimum facula) - 165 Lux

Make PLS/ DL&MC/Robe

SITC of fog machine With the latest technology of the

heater, the ZB-3000 has better effects as a fog

machine Power : 3000W Heat-up Time : 12 minutes

122 DELETED Fluid consumption rate : 45min/L (100% output), 0 Nos 37996.00 0.00

2hours/L (30%output) Tank capacity : 10L

Circuitry Contro : Remote Control DMX : 512 Control

Make PLS/ DL&MC/Robe

SITC of 400W LED Blinder Light . 400W LED Blinder

Light 30 Degree complete with 3200K/5600K CCT

4x100W Chip On Board LED lamp source, DMX 512

dimming with 4/8 Channel modes, Black finish

housing, IP20 protection having Strobe option and

smooth dimming, illuminate Stage with uniform light

intensity levels

Make PLS/ DL&MC/Robe

SITC of DMX splitter 1 in 10 out Voltage : 100-

220V,50/60hz Power : 4W IP rating : IP20 isolated

DMX output ports 3pin XLR inputs & outputs 10

124 DELETED isolated outputs 0 Nos. 18172.00 0.00

DMX loop through port with inbuilt termination

Universal power supply

Make PLS/ DL&MC/Robe

SITC of XLR connectors Make-

PLS/DL&MC/Acoustika

SITC of DMX cable 24 AWG (25/0.10mm) x 2 core

ATC copper conductor, PE insulated, core twisted in a

circular form, covered with special moisture-proof

polymer, spiral shielded (97%) with ATC copper, outer

Jacketed with Matt finish High Flex Special PVC.Make-

Netmas/ Krystals/Tasker

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

127 DELETED SITC of light clamp for stage light Make- Custom 0 Nos. 590.00 0.00

SITC of Stage light light point Wiring from light points

to MCB box wire 2.5 Sq.mm 3 Core PVC Insulated

and PVC Sheathed Cable including of suitable size 5/6

128 DELETED amps sockets with box at top sutable MCBs and MCB 0 Nos. 3304.00 0.00

box. Electrical cable make- Polycom/Havells/eq.

Socket, top and MCBS make-

Anchor/Schnieder/Havells/Hager

Supply of 4 Side ladder made out of 25 x 50 mm

flate ms pipe Make- Tata/Jindal/Apollo

130 DELETED SITC of 50 mm MS pipe light bar 0 Nos. 26550.00 0.00

SITC of Mini Perl 1024 Supply of Light Controller

Computer Light Controller,Product Model：Mini Pearl

Voltage 100 to 240 V Frequency 50/60 Hz Mating

number of Fixtures 96 The Number of Scenes That

Can be Saved 60 The Number of Scenes That Can

Run Simultaneously 10 The Total Number of Steps in

a Multi Step Scenario 600 Scene Time Control Fade

In, Fade Out LTP Sliding Graphics Can be Stored for

Each Scene 5 Fader Scenes/Dimming Size 485 x

420 x 105 cmProduct Description Leveraging the skills

of our qualified team of professionals, we are

instrumental in offering a wide range of Mini Pearl

1024 Lighting Controller.

PLS/DL&MC/Acoustika

EXTERNAL LIGHTING

Supplying and fixing (with suitable MS clamp) 300mm

132 long 65mm dia MS pipe with base plate i/c nipple each 2 3384 3386.00

for Gate light.

Supplying, installing, testing & commissioning of 4.5

Mtr long single dip Galvanised steel

octagonal poles in 3mm sheet integrated

connector box inside the pole containing one no.

5A MCB , Neutral link and earth terminal with single

over hang bracket 1m long ; providing and

fixing in position 1:2:4 reinforced cement

133 concrete foundation for the pole, size each 15 28000 28015.00

500mm(L)X500mm(W)X 1650mm deep i/c excavation

of earth, providing, cutting, bending and placing in

position reinforcement as per drawing and providing

PVC flexible pipes 50mm dia for cable entry and

exit as required i/c foundation bolts, transportation,

handling, marking etc. as per specification and

drawings as required of Havells/ Bajaj or equivalent

Supply and installation of following arms suitable for

4.5 Mtr to 9 mtr street light pole

a Single Arm over hang bracket 1mtr length each 12 3384 40608.00

b Double Arm over hang bracket 1mtr length each 3 4600 13800.00

Providing and erection of black painted galvanized 3

meter high poles in different section, top 60mm dia.,

bottom 100mm dia. with gold colour painted

ornamental cast aluminium ring having lockable

weather proof flush door junction box in bottom

section, and suitable arrangement for installation of

CCTV and with base plate dia. 290mm having 4 holes

of 22mm dia. complete erected in an approved

manner including foundation of Suitable size & type of

foundation bolts as required. (For CCTV)

COMMUNITY CENTRE ENGINEERING CONSULTANCY SERVICES

2022 Rate Amount

S.No. Description Unit Qty

Code / (In Rs.) (In Rs.)

supply & drawing 3 core 2.5 sqmm

unarmoured copper cable inside the GI

136 Octagonal pole from connector box to the light Set 15 1083 16245.00

fixture including connections with thimbles as required

upto 9m high pole

Supplying and fixing (with suitable MS clamp) 1200mm

long vertically and 900mm inclined at 45 degree,

65mm dia MS pipe with hardware i/c nipple for

street light.(boundary wall light)

Supplying and fixing of LED Bollard Fitting 600mm

High with IP65 and IK07 Housing made up of

aluminum pipe powder coated black after

phosphochromate treatment with aluminum heat sink

for effective thermal management Complete with

Mounting Brackets & accessories as required with

connections similar. Havells Mount Bollard 0.60 mtr

MOUNTBLMINIMOUNTBL10WLED830PSYMTOPMM

AS . The product should be BIS approved with R

number mentioned on product label. To be supported

with Product test reports - LM79, Is 10322/IEC 60598

and for LEDs - LM80, RoHS and Photo Biological

Safety certificate.

Supplying and fixing of Spike Light LED of Havells cat

no. IRVINESPS5WLED830PSYMTG or equivalent.