E-TENDER FOR INTERIOR AND RENOVATION WORKS OF PSB BRANCH AT BO AT SHAZADPUR MAJRA, DISTT. AMBALA (HRY)

SCHEDULE-"A"(FURNISHING WORK)

SCHEDULE-"B"(ELECTRICAL WORK)

SCHEDULE-"C"(AC WORKS)

DESCRIPTION OF ITEM

SCHEDULE - 'A' (FURNISHING WORK)

WALL PANELING

Providing and fixing of paneling on column/wall. Framing shall consist of Aluminium Box Sections 50mm x25 mm x1.5 mm wall thickness (0,583 Kg/m) (Make Jindal/ Hindalco/ Indal) with maximum spacing @ 600mm c/c both ways horizontally and vertically on the column/wall. This framing would be covered by 12mm HDHMR Ply (Moisture content- <8 %, Water Absorption 5% after 2 Hours Soaking)(Make. GREENPLY/ Century / Duro) and finished with 1.0 mm thk. laminate(Make- Archidiam/Century/Greenlam) of desired shade design and gloss of approved makes. Wooden molding, lipping etc.shall be provided wherever required as per drawing in desired shade. The work shall also include the cost of making cutouts for the electrical switches, lights, switch boxes etc. and provision for laying conduit for electrical/telephone/Data cabling etc.including cost of 3mm thick white foam sheet back of aluminium box sections, and 6" wide laminate strip bleow the under line of ceiling on wall 2" wide laminate strip of yellow colour on top surface of it with green colur laminate strip 4" wide below the yellow laminate strip as specified by Architect.

Providing and fixing of paneling on column/wall. Framing shall consist of Aluminium Box Sections 50mm x25 mm x1.5 mm wall thickness (0,583 Kg/m) (Make Jindal/ Hindalco/ Indal) with maximum spacing @ 600mm c/c both ways horizontally and vertically on the column/wall. This framing would be covered by 11mm Commercial Ply (Make. GREENPLY/ Century / Duro) and Above 9mm Thk.CNC HDHMR Board (As per Design) Finishing with Royale Matt PU Polish. of desired shade design and gloss of approved makes. Wooden molding, lipping etc.shall be provided wherever required as per drawing in desired shade. . The work shall also include the cost of making cutouts for the electrical switches, lights, switch boxes etc. and provision for laying conduit for electrical/telephone/Data cabling etc.including cost of 3mm thick white foam sheet back of aluminium box sections, and 6" wide laminate strip bleow the under line of ceiling on wall 2" wide laminate strip of yellow colour on top surface of it with green colur laminate strip 4" as per drawing.

PARTITIONS WORK

FULL HEIGHT SOLID PARTITION

LOW HEIGHT PARTITIONS:

GLAZED PARTITION

12MM THICK TOUGHENED GLASS PARTITIONS.

CASH CABIN PARTITION

DOORS

WOODEN FLUSH DOOR

12MM THICK TOUGHENED GLASS DOORS :

FALSE CEILING

GYPSUM BOARD FALSE CEILING

FALSE CEILING (ARMSTRONG CEILING )

TABLE & FURNITURE

All Tables/ Counters/Work stations to have 25 mm thk. Post form laminated MDF board and 19mm thk. commercial ply at sides, modesty and 1.0 mm thk. laminate finish on exposed vertical surfaces. 1.5 mm thk. Laminate on horizontal surfaces along with 0.8 mm thk. white laminate on inside surface.

MANAGER TABLE With Side Rack:

WORKING COUNTER

FRONT VERTICAL/ HORIZONTAL 12 MM GLASS AT FRONT COUNTER - (with provision for 3" slit horizontally throughout for customer interaction)

CASH COUNTER TABLE

STORAGE

LOW HEIGHT STORAGE CABINETS/ BACK STORAGE: (2'-6" HIGH)

FULL HEIGHT STORAGE CABINETS

CABINET AT PANTRY AREA

MAIN ELECTRICAL PANEL CABINET

TROPHY CASE 1'-6"x6'-0" HIGH FOR BRANCH MANAGER.

FURNITURE

2 SEATER Sofa - Same as above but in two seater sofa with SIZE : 1600(W) X 900(D) X 850(H).

High Back Mesh Chair with revolving, Hydraulic, vadjustable arms with Headrestas as per Picture. (Basic rate Rs. 7500)

Medium Back Mesh Chair with revolving, Hydraulic, adjustable arms without headrest as per Picture.(Basic rate Rs. 6000)

CENTRE TABLE :-Supplying and placing in position of Center Table as per photograph. Table size 1220mmL x 610mmD x 460mmH, Modern & Sleek design using SS framework and toughened glass . Complete as per direction and satisfaction of Architect in charge. (Basic rate Rs.8000)

PAINT

PIN-UP BOARD

Providing & fixing of PSB Signage made of 3mm Acrylic sheet with LED Panels for Back light of logo of size (2’x3’) behind Reception Table complete as approved by Bank's Architect /Engineer In-charge.

SUGGESTION BOX:- (450 x 300 x 250) : Providing and fixing suggestion box made out of 19mm BWP ply and finished with 1mm laminate and enamel painted on the inside. A 300 mm long slit is to be made in the front for letters, etc.The work should be completed in all respects.

WRITING LEDGE:- Providing and Fixing Writing ledge made BWP box of size 900 mm x 300 mm x 200 height finished with 1 mm thick mica with a provision of 4 nos divisions for voucher and 12 mm glass on top fixed with 3" high SS spacers (in ATM and BRANCH) as per architect.

CHEQUE DROP BOX:- Providing and Fixing one cheque drop box made out of 19 mm thick BWP duly laminated with all hardware fitting and fixtures. Size 450 x 300 x 250 mm

3M FILM ON GLASS OF ANY THICKNESS

ACP ON WALL/COLUMN & SHUTTER BOXING

DESCRIPTION OF ITEM

MV PANEL BOARDS

MV CABLES

DISTRIBUTION BOARDS

POINT WIRING

TELEPHONE SYSTEM

COMPUTER DATA NETWORKING

SUPPLY & INSTALLATION FANS FIXTURES & LIGHTS

EARTHING

FIRE FIGHTING

SECURITY ALARM SYSTEM

CCTV CAMERA

MV PANEL BOARDS

MCCBs shall be used with Thermal Magnetic Based releases upto 250A and microprocessor based Over Load, Short Circuit / Earth Fault release.

Breaking capacity mentioned is Ics value.

This BOQ to be read in conjunction with technical specifications and Single Line Diagram (attached for reference). If any discrepancy occurs that should be brought to the notice of Client/Consultant before quoting the price otherwise stringent condition will be deemed to have been considered.

All MCCBs shall be provided with rotary operating handle and ON/OFF lamps.

All meters shall be digital type (unless otherwise specified) with RS 485 Port.

All Incoming and outgoing breaker must have provision of Potential free contacts for BMS/FAS.

All MCBs shall be motor duty type.

All current/voltage transformer shall be cast resin type.

All indicating lamps shall be LED type.

Current density for Al. bus bars shall not be more than 0.8A/Sqmm. Rating of Bus bar is after considering all derating factors. (Bus bar sizing calculation to be submitted for approval.)

All internal control wiring shall be heat resistant type.

All TP feeders shall be provided with Isolable neutral link.

Bus bar chamber & cable entry both shall be provided at top only.

All feeders shall be provided with door interlocked with door defeat, pad lock facility.

Live parts shall not be accessible after opening the door, Transparent acrylic sheet to be provided to cover the same.

Spare contacts of MCCBs / Relay / Contactor shall be wired upto terminal block.

20% spare control terminal to be provided.

All incoming/outgoing cables shall be terminated on links/terminals.

MV PANEL

INCOMING

1 No-200 Amp,25KA,4P MCCB

1 No- 200 4pole Changeover Switch

1 No.-200 Amp 4 pole Cu. Bus Bar

METERING & INDICATION SEB

CT for metering 120/5A Class-1, 15VA - 3 Nos.

Multifunction Meter-1 no.

Red, Yellow & Blue indicating lights with control MCB of 2A - 1 Set

OUTGOING

63 A TPN MCB (10KA) - 3 No.

40A TPN MCB (10KA) -`1 Nos.

4 Pole ELCB/RCCB 100 M Amp , 1 Nos of Siemems/ L&T/Sneider Including all accessories neutral links etc all complete including dressing

MV CABLES

Supplying, Laying, testing & commissioning of the following sizes of XLPE Al. Conductor armoured cables of 1.1KV grade on the surface of wall or on existing cable trays complete with hangers, properclamps fixing hardware etc. as required

4 C x 35 Sq. mm Al. Cable

5 C x 25 Sq. mm Al. Cable

4 C x 16 Sq. mm Al. Cable

4 x 10 sqmm Copper Wire with 50 mm conduit

4 x 6 sqmm Copper Wire with 25 mm conduit

Suppling, making, testing & commissioning of end termination with brass mettalic double compression glands suitable for the following sizes of XLPE Al. conductor arnoured cables including proper sizes of copper thimbles etc. as required.

4 C x 35 Sq. mm Al. Cable

5 C x 25 Sq. mm Al. Cable

4 x 10 sqmm Copper Wire

4 x 6 sqmm Copper Wire

DISTRIBUTION BOARDS

4 WAY TPN DB (PDB)

63Amp TPN MCB (10KA) - 1 No

63Amp 4P RCCB (30mA) -1 Nos

100 Amp TPN copper busbars - 1 Set

10/16/20/25 Amp SP MCB (10KA) - 12 Nos

4 WAY TPN DB (LDB)

40Amp TPN MCB (10KA) - 1 No

40Amp 4P RCCB (30mA) - 1 Nos

100 Amp TPN copper busbars - 1 Set

10/16/20/25 Amp SP MCB (10KA) - 12 Nos

4 WAY TPN DB (UPS)

40Amp TPN MCB (10KA) - 1 No

40Amp 4P RCCB (30mA) - 1 Nos

100 Amp TPN copper busbars - 1 Set

10/16/20/25 Amp SP MCB (10KA) - 12 Nos

12 WAY DB BOX FOR LIGHT - ATM

63Amp TPN MCB (10KA) - 1 No

16/32 Amp SP MCB (10KA) - 8 Nos

40 Amp. 2 P ,25ka MCB with Box for UPS

POINT WIRING

Wiring for switch controlled Light Point with 3 x 1.5 Sq. mm PVC insulated FRLS multistrand copper conductor 1100 Volt grade wires in PVC surface/recessed conduit with accessories including cost of providing saddles etc for surface conduiting and/or cost of cutting and filling chases for recessed conduiting and including the cost of supplying and fixing a 6 Amp 240 Volt grid plate mounted switch with moulded cover plate in zinc chromate passivated MS box, and costing circuit wiring with 3 x 2.5sq. mm 1100 volt grade PVC insulated FRLS Multistrand copper conductor wires, inPVC conduit complete as per specifications and as required.

Primary Point

Secondary Point

Wiring for 5 pin 6 A Light plug point with 3 x 1.5 Sq.mm PVC insulated FRLS multistrand copper conductor 1100 Volt grade wires in recessed/surface FRLS PVC conduit with accessories including cost of providing saddles etc for surface conduiting and/or cost of cutting & filling chases for recessed conduiting, including the cost of providing & fixing 1 No. Modular type 3 pin 6 A socket outlet controlled by 6 A switch in zinc chromate passivated MS box, and circuit wiring with 3 x 2.5 sq mm complete as per specfications and as required.

Wiring for 3 nos. 5 pin 6 A Light plug point controled by 6 A Switch with 3 x 2.5 Sq.mm PVC insulated FRLS multistrand copper conductor 1100 Volt grade wires in recessed/surface PVC conduit with accessories including cost of providing saddles etc for surface conduiting and/or cost of cutting & filling chases for recessed conduiting, including the cost of providing & fixing 1 No. Modular type 3nos.5 pin 6 A socket outlet controlled by 6 A switch in zinc chromate passivated MS box, and circuit wiring with 3 x 2.5 sq mm complete as per specfications and as required.

Wiring for following. 6 pin 6/16 A Power plug point controlled by 1 No. 16A Switch with 3 x 4.0 Sq. mm PVC insulated FRLS multi strand copper conductor 1100 Volt grade wires in recessed/surfacePVC conduit with accessories including cost of providing saddles etc for surface conduiting and/or cost of cutting chases for recessed conduiting, including the cost of providing & fixing 1 No. Modular type 6 pin 16 A socket outlet controlled by 1 No. 16 A switch in zinc chromate passivated MS box, complete as per specification and as required

Wiring for ceiling/wall fan Point with 3 x 1.5 Sq. mm PVC insulated FRLS multi strand copper conductor 1100 Volt grade wires in surface / recessed, PVC conduit with accessories including cost of providing saddles etc for surface conduiting and/or cost of cutting and filling chases for recessed conduiting and including the cost of supplying and fixing a 6 Amp 240 Volt grid plate mounted switch & 300W electronic regulator with moulded cover plate in zinc chromate passivated MS box, and including the cost of circuit wiring with 3 x 2.5sq. mm 1100 volt grade PVC insulated FRLS multi strand copper conductor wire, inPVC conduit complete as per specifications and as required.

Wiring for exhaust fan Point with 3 x 1.5 Sq. mm PVC insulated FRLS multi strand copper conductor 1100 Volt grade wires in surface / recessed PVC conduit with accessories including cost of providing saddles etc for surface conduiting and/or cost of cutting and filling chases for recessed conduiting and including the cost of supplying and fixing a 6 Amp 240 Volt grid plate mounted switch with moulded cover plate in zinc chromate passivated MS box, and including the cost of circuit wiring with 3 x 2.5sq. mm 1100 volt grade PVC insulated FRLS multi strand copper conductor wire, inPVC donduit complete as per specifications and as required.

Wiring for 20A Single Phase metal clad socket outlet with 2 x 6 +1 x 2.5 sqmm PVC insulated FRLS multistrand copper wire of 1100 volt grade in surface / recessed PVC conduit pipe with accessories including supply and fixing 20A 3pin metal clad plug and socket and 20A SP MCB (MD) in IP 44 Poly carbonate box complete as per specification and as required.

SIGNAGE DP-MCB WITH TIMER UNIT

Call Bell point with bell push: Supply & fixing remote controlled call bell buzzer suitable for 230 V AC/ Battery operated with remote type bell push as reqd.

LAN & TELEPHONE SYSTEM

Supply and fixing of RJ11 moduler Telephone outlet in Zinc chromate passivated M.S. Box and Modular Plate including cost of M.S.box, modular plate and connections etc as required.

20 pair telephone tag block

Supplying & laying the following sizes of PVC insulated and overall sheathed taped telephone cables of 0.51mm dia size inPVC conduit recessed in wall or on surface of wall including cutting the chases in making good the same and connection etc. complete as required. (From TTB on Ground Floor to Upper Floor)

CAT 6 telephone wire

10 Pair telephone cable

COMPUTER DATA NETWORKING

Supply & fixing the following size of PVC 25mm dia conduit in Floor/Surface of wall, including cutting the Floor/Wall and make the good the same as required (For Switcher to Data point.) Supply and fixing flush steel box for computer data outlet dully recessed in wall complete computer outlet RJ 45 including connect etc. required.

Supply and drawing of cat 6 Data cable in PVC conduit with suitable clamp and saddles and other accessories required making connection on both the ends.

Supply of Cat -6 D-Link patch cord 7' 0" (ATM 1No)

Supply of Cat -6 D-Link patch cord 3 '0" (ATM 1No)

16U Rack ( D Link)

24port Patch Panel ( D Link)

SUPPLY & INSTALLATION FANS FIXTURES & LIGHTS

Supply & installation , testing & commissioning of wall Mounted Fan 500mm Sweep. complete with all accessories such as blades, canopy etc.Connection with 3 x 1.5 sq mm FRLS PVC insulated multistranded copper conductor wires from the socket outlet to the fan earthing etc. complete as required.(Wall Mounted Fans Bracket fans sweep 500 mm)

Supply, installation and fixing of 70W ceiling fan with sweep 1200mm/600mm CG make with all connections and anchor fasteners, fan hooks, down rods etc as required as per drawing.

Supply & installation, testing & commissioning of 12/9" Exhaust fans on existing opening in wall including all fixing hardware, louvers, shutters etc. Connection with 3 x 1.5 Sqmm FRLS PVC insulated multistranded copper conductor wire from the socket outlet to the fan earthing etc. complete as required.

Supply and Installation of unpacking, assembling, testing, & commissioning of All type of Recessed / Surface mounted Lighting Fixtures (as approved by client/architect) including all fixing hardwares complete as required S/F of 600 x 600 LED recessed mounted (LED 36 Watt 6500 K in false ceiling)

Suppy and Installation of storing, assembling, testing, & commissioning of All type of Recessed / Surface mounted Lighting Fixtures (as approved by client/architect) including all fixing hardwares complete as required ( LED Down Lighter 15 Watt-)

SITC -Ceiling Profile Ligth Type TruGroove, Installation/mounting type Recessed, Color Temperature Tc (K) 3000 / 3500 / 4000 Housing (Material And Finish) Extruded aluminum trim and die-cast endplates,System Wattage 20W, Classifications (IP/IK) IP20, Cover (Glass/ PC) Poly carbonate, Electrical Class II,/ LED Lamps 240Nos/Mtr (LM26) 5 mtr roll with LED Driver lumens (Make IP Mac, Sanspa, Helius, )

Suppy and Installation of storing, unpacking, assembling, testing, & commissioning of All type of Recessed / Surface mounted Lighting Fixtures (as approved by client/architect) including all fixing hardwares complete as required ( LED tube Light 20 watt )

Supply & Installation, storing, unpacking, assembling, Installation, testing, & commissioning of LED STRIP Light (as approved by client/architect) including all fixing hardwares complete as required (LED strip In Cove light with Driver)

EARTHING

Earthing with copper plate electrode 600x600x3mm including accessories & providing masonary enclosure with MS cover plate having locking arrangmnt, watering pipe and excavation in soil 6 MTRS minimum, including salt and charcoalas required including P&F 8 Guaze SWG copper wirein recessor surface for earthing as per design & detail complete. Including Supplying, laying & terminating earth connection with 8 SWG Copper wire.

FIRE FIGHTING WORK FOR BRANCH (AUTO-DIALER SYSTEM)

Fire Alarm Panel 2 ZONE with Advanced Micro controller based, character LCD display. Zone wise Fire,open,short LED indicators, testing facility. Trickle & fast charging facility. Reset, alarm cancel, lamp test and control etc. with Auto- Dialer System. Compatible with any make smoke and heat detectors. (Make Agni Surkhsha /Morley) Technical :: Power Supply 230 V AC , 50 Hz / 24 V DC, Operating Voltage 24 V DC, Normal Loop Voltage 23.20 V DC, E.O.L. 4K7

Supplying of WIRE 2 CORE 1.5MM conductor non- armoured cable. (approve make:Polycab/Finolex/CCI)

Supplying, Installation, connection, testing & commissioning the following :

Smoke Detector - Optical type low current draw, wide operating voltage 8 to 30 VDC, Bi-colour LED detector status indicator. Automatic drift compensation. Tested and approved to EN54 - 7:2000 (Amendment 1). Photoelectric Smoke Detector. (Make :-Apollo/ System Sensor / Edwards)

HEAT Detector - Optical type low current draw, wide operating voltage 8 to 30 VDC, Bi-colour LED detector status indicator. Automatic drift compensation. Tested and approved to EN54 - 7:2000 (Amendment 1). Photoelectric Smoke Detector (Make Apollo/ System Sensor / Edwards)

Electronic Hooter . Hi-Intensive sound (80 to 100 db), Tested by ERTL as per IS:2189. Power I/P 100 V AC or 24 V DC. Sound O/P 100dB. Colour Red. Speaker 4 watt : (Make Agni Surkhsha/Morley )

Supply, Installation of Manual Call Point with hammer and chain. As per IS:2189. SS Chain , Hammer & blinking. Power I/P 24 V DC, MS Sheet, 750 gm., Dimensions (mm) 120 X 90 X 55. Colour - Red. (Make Agni Surkhsha/Morley )

SECURITY ALARM SYSTEM

Providing and fixing 4 Zone Control Burglar Alarm Panel.Battery backup with inbuilt charger.User password protection.Real time clock with 128 event history.LCD display current date and time with current status of all zone. Programmable hooter trigger dealy ( 0-07 min.). entered telephone Nos. and message check facility. Hooter time 0 to 07 min.Enough inside space for SMF battery ( Including SMF battery) ( Make- Electro group)

Providing and fixing panic switch for emerjency alarm complete

Providing & fixing Motion sensor and magnate for Strong room Door complete

Providing & fixing Electronic Hooter 110 DB Hooter Security Loud Sound complete.

Supplying of WIRE 2 CORE 1.5MM conductor non- armoured cable.

CCTV CAMERA

Providing and fixing of 43" LED TV Display complete in all respect.

DESCRIPTION OF ITEM

SCHEDULE - 'C' (AC WORKS)

Supplying, erection, testing and commissioning following wall mounted Split/ Root mounted cassette units of (Bluestar/ Carrier/ Daikin) with cordless remote complete with all necessary fittings duly insulated with 9 mm thick nitrile rubber pipe insulation with (evaporator coil – copper only), fan and fan motor, machine control panel improved Refrigerant Joints. Air conditioners shall be fitted with hermetically sealed type suction cooled reciprocating or discharge cooled rotary compressor or scroll compressor. Compressor unit operating on R-410. All complete as per drawing, approval and instructions of the Architect/ Employer (Rates to be inclusive of Copper refrigerant pipe with insulation and Drain pipe up to 3 Mtr length).

Nominal Capacity - 1.0 TR Inverter type (5 Star) Star BEE Rating (Make - Carrier/Hitachi/Daikin/Bluestar)

Nominal Capacity - 1.5 TR Inverter type (5 Star) Star BEE Rating (Make - Carrier/Hitachi/Daikin/Bluestar)

Supply, Installation, testing & comisioning of Voltage Stabilizer of approved make. Note: All voltage stabilizer is sufficient for A.C.should have time delay

4 KVA for 1.5/1.0 Tr Hi-Wall Split

ADDITIONAL COPPER REFRIGERANT PIPING :

Installation & commissioning of Soft copper piping for split/cassette A/C with niotrle rubber insulation complete fiting & insulation

Supply and laying of 4 core 4.0 sq mm FRLS copper flexible cable (for single phase HWS AC) Make: Finolex / Polycab / Havells / Pyemen / Ecko

DRAIN PIPING:

FRAME WORK:

MCB WITH TIMER UNIT - FOR A/C