Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical, Instrumentation and Miscellaneous Civil works for Existing Water Distribution Station at Gujkomasol at South Zone of AMC.

estimated cost, as mentioned above. Amount of my / our tender works out for Rs. ________________ (in figures)

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

2) Lump Sum Amount Quoted for Buy Back Items (as per Annexure-I) in Scope of Work (Section A-4, A.4.2), Rs. _____________

Signature of Contractor

Company’s seal:

1. Bidder has to quote % Above (Premium) or % Below (Discount) or As par of total Job, Rs. 4,39,45,843/- (i.e. Total Estimated Project Cost w/o

buyback value) and has to carry out work at Ordered Value with any Excess -Less Qty. mentioned in above items as per site requirement and

instruction of Engineer-in-charge.

2. Bidder shall quote for buyback items as per Annexure-1 in Scope of Work, Section A-4 (A.4.2) separately online at Sr.

as indicated above. Bidder to note that net amount quoted by the bidder shall be determined by deducting the total amount

as indicated above. Bidder to note that net amount quoted by the bidder shall be determined by deducting the total amount

of buyback quoted by bidder from the amount quoted for works as above at Sr. No. 1 and the net amount so derived shall

be considered for Price Evaluation purpose to determine lowest bid.

SUMMARY OF COST

Name Augmentation work with SITC of Pumping Machinery with related Mechanical,

of Electrical, Instrumentation and Miscellaneous Civil works for Existing Water

Work Distribution Station at Gujkomasol at South Zone of AMC.

A MECHANICAL WORK

B INSTRUMENTATION WORK

C ELECTRICAL WORK

D CIVIL MISCELLANEOUS WORK

E TOOLS & TEST EQUIPMENTS

E TOTAL OF CAPITAL COST (A + B + C + D + E)

F BUY BACK AMOUNT IN RS. (AS PER ANNEXURE-1)

TOTAL AMOUNT AFTER DEDUCTION OF BUY BACK

TOTAL AMOUNT AFTER DEDUCTION OF BUY BACK

VALUE IN RS. (E-F)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Miscellaneous Civil works for Existing Water Distribution Station at

Work Gujkomasol at South Zone of AMC.

MECHANICAL WORK

ITEM QTY UNIT AMOUNT

1.1.1 HORIZONTAL SPLIT CASING 6 Nos. 12,61,480.00

CENTRIFUGAL PUMP WITH MOTOR

Supply, installation, testing and commissioning of

horizontal mounted, side suction & side delivery type

Horizontal Split Casing Centrifugal Pump having CI

Casing, CF8M impeller & wear rings, SS410 Shaft &

shaft sleeves, gland packed and suitable to couple with

TEFC squirrel cage IE3 efficiency class Induction

Motor, 3 Phase, 415 V, 50 Hz., AC supply, max.

RPM synchronous speed. The scope shall also include

all required accessories viz. CI drain rim type base

plate, Flex. coupling, coupling guard, foundation

bolts, min 25 mm dia. G.I. Class-B drain pipe upto

drain channel, etc. as per specification.

Capacity : 1400 m³/hr

Motor Rating : 160 KW or as per Manfactuer

The scope also includes chipping, grouting, altering

the civil foundation to suit the new pumpset as

required and removal of debries and cleaning the dry

INDUCTION MOTOR FOR ABOVE HSCF

Supply Installation Testing and Commissioning

(SITC) of approved make, energy efficient, Efficiency

Class-IE3, horizontal foot mounting, solid shaft,

squirrel case, Induction Motor rating mini. 160 kW or

higher as per IS, 3Phase, 415V, 50Hz., AC supply,

maxi.1500 RPM synchronous speed and having TEFC

enclosure with Class F insulation (temp. rise limited to

Class B) with RTD/BTD.

2.1.1 VALVES 2 Nos. 3,057.00

Supply, installation, testing and commissioning of

Manually gear operated CI/DI Double Flanged,

Rising Spindle type, Sluice Valve conforming to IS

14846 PN 1.0 with SS 304 seat rings and SS spindle

with hot dipped galvanised hardware's, bolts, nuts &

washers, gaskets, etc. as per data sheet.

Size : 50 mm NB (Manually Operated - On Drain

2.1.2 Size : 150 mm NB (Manually Operated - On header 1 Nos. 7,790.00

2.1.3 Size : 600 mm NB (Manually Gear Operated - On 6 Nos. 1,52,297.00

suction side of each 1400 m3/hrs HSCF pumps)

2.2.1 Supply, installation, testing and commissioning of 6 Nos. 2,36,468.00

Electrically gear operated CI/DI Double Flanged,

Rising Spindle type, Sluice Valve with actuator,

integral starter,etc. conforming to IS 14846 PN

with SS 304 seat rings and SS spindle with all hot

dipped galvanised hardware's, bolts, nuts & washers,

gaskets, etc. as per data sheet.Size: 500 mm NB

(Electrically Operated - On Delivery Side of each

1400 m3/hrs Pump)

2.3.1 Supply, installation, testing and commissioning of 6 Nos. 1,38,012.00

double flanged CI/DI Dual Plate Check Valve

conforming to API 594 Class 300 with CS dual door,

hinge pin & stop pin of SS 410 , springs of AISI

and seat rings of SS 304 ( renewable ), along with all

required accessories, gaskets and hardwares,etc. and

as per specification.

Size : 500 mm NB (On Delivery Side of each

2.4.1. Supply of Electrically & gear operated CI/DI Non- 1 Nos. 3,49,036.00

1 Rising Spindle DF Butterfly Valve, conforming to IS

13095 / BS EN 593, PN 1.0 with SS 304 renewable

seat rings , indicator, gear box with bolts, nuts &

washers, gaskets, etc. as per specifications.

Size: 900 mm NB (Elec. Operated on Header Pipe

after Flowmeter)

2.4.1. Installation, testing and commissioning of Electrically 1 Nos. 7,574.00

2 & gear operated CI/DI Non-Rising Spindle DF

Butterfly Valve, conforming to IS 13095 / BS EN

PN 1.0 with SS 304 renewable seat rings , indicator,

gear box with bolts, nuts & washers, gaskets, etc. as

per specifications.

Size: 900 mm NB (Elec. Operated on Header Pipe

after Flowmeter)

2.5.1 SITC of CI/DI Tempor proof Flanged Air Valve 1 Nos. 25,759.00

with Isolation Sluice Valve as per IS 14845 PN-1.0 &

IS-14846 PN-1.0 respectively with SS304 float, gun

metal nozzle, complete hardware's, bolts, nuts &

washers, gaskets etc. including all taxes, Insurance,

Transportation, freight charges, Inspection charges,

loading, unloading, conveyance to departmental

stores, stacking, security etc. as per IS and

Size: 150 mm NB - Pn 1.0 (On Heder line outside

the Pump house)

3.1.1 C.I. PIPES & SPECIALS 3500 Kg. 58.00

Manufacture, Supply and delivery of CI flange ended

Pipes complete as per IS 1536 / 1537, Class B or its

latest revision for various dia meter and classes The

delivery of pipes to be made to Pump house/site

including all taxes , loading carting, unloading,

stacking, insurance, octroi, inspection charges etc.

complete as per IS and as per specifications.

Size : 450 mm NB and Above ( For HSCF Pump Pipe)

3.1.2 Labour Charge of CI flange ended Pipes complete as 3500 kg 11.00

per IS 1536 / 1537, Class B or its latest revision for

various dia meter and classes The delivery of pipes to

be made to Pump house/site including all taxes

loading carting, unloading, stacking, insurance, octroi,

inspection charges etc. complete as per IS and as per

specifications.

Size : 450 mm NB and Above ( For HSCF Pump Pipe)

3.2.1 SITC of CI flanged reducer/expander conforming to 6 Nos. 12,876.00

IS 1538 with gaskets, hardware and required

accessories as per specifications.Size: 600 mm X

mm X 600 mm (L) (Suction Reducer- 450 mm or size

as per actual Pump Suc. Flange) ( For each

3.2.2 Size: 500 mm X 350 mm X 600 mm (L) (Delivery 6 Nos. 8,410.00

Expander- 500 mm or size as per actual Pump

Del.Flange) ( For each 1400 m3/hrs Pump)

3.3.1 Supply, installation, testing and commissioning of 6 Nos. 29,280.00

double flanged Expansion Bellows confirming to

EJMA/IS standard with PN 1.0 rating & all necessary

St.St. hardware's.

Size : 600 mm x 300 mm ( L ) (On suction of each

1400 m3/hrs Pump)

3.3.2 Size : 500 mm x 300 mm ( L )(Delivery of each 1400 6 Nos. 22,200.00

3.4.1 Flanged Joints of Pipes, Fittings and Specials: 2 Nos. 434.00

Supply, Installation, Making of Flanged CI & GI

Pipes, Fittings and Specials Joints with all jointing

materials, rubber packing, nut bolts, labour etc.for

complete connection.

Size: 50 mm dia (For Dewatering Pumps)

3.4.2 Size: 150 mm dia (For Drain Pipes & Air Valve) 2 Nos. 611.00

3.4.3 Size: 600 mm dia (Each 1400 m3/hrs Pump Suction 35 Nos. 3,217.00

3.4.4 Size: 500 mm dia (Each 1400 m3/hrs Pump Delivery 40 Nos. 2,588.00

3.4.5 Size: 900 mm dia (Each 1400 m3/hrs Pump Header 20 Nos. 5,954.00

3.5.1 M.S. PIPES & SPECIALS 15 RMT 5,509.00

Supply, Gas cutting of pipe, Fabrication, welding,

Installation, testing and commissioning of MS pipe &

Specials, reducer, expander, Y-Joint, Tee etc.

conforming to IS 3589 & flanges confirming to IS

6392-PN-1.0, fabricated from MS. plate with

necessary supports & anchoring. Pipe fabricated from

MS plate. (Excluding supply of flange)

The scope also includes civil work, casting PCC thrust

block, chipping, grouting, supporting,etc. require for

laying & connecting the MS pipes & fittings as require

outside the pump house

Size : 500 mm NB X 6.3 mm Thk

3.5.2 Size : 600 mm NB X 6.3 mm Thk 5 RMT 6,628.00

3.5.3 Size : 900 mm NB X 8.0 mm Thk 5 RMT 12,632.00

3.6.1 Providing epoxy coating to inside and outside pipe 30 Sq.m 332.00

line with two parts of Solvent free high build liquid

epoxy lining as per AWWA C210-07 Suitable for

potable water application & shall be approved by

CFTRI- India/BS 6920-UK/international standard

/NSF/ANSI/-61 2004 to be fit for contact with potable

water for human consumption with 406 micron

thickness. inclusive of necessary materials , labour

,Equipment ,Contractor's overhead charges and profit

and including all taxes.

Size: 500 mm NB

3.6.2 Size: 600 mm NB 5 Sq.m 332.00

3.6.3 Size: 900 mm NB 5 Sq.m 332.00

3.7.1 Supply, welding , Installation, testing & 20 Nos. 9,114.00

commissioning of MS flat machined faced flanges

confirming to IS 6392 & drilled as per IS-1538 with

drilling off centre bolt holes and flange thickness as

per PN 1.0 including cutting & welding.Size : 500 mm

NB Drilled (Qty. as per Actual site condition)

3.7.2 Size : 600 mm NB Drilled (Qty. as per Actual site 10 Nos. 9,996.00

3.7.3 Size : 900 mm NB Drilled (Qty. as per Actual site 10 Nos. 21,952.00

4.1.1 G.I. PIPES & FITTINGS: 30 RMT 387.00

Supply, installation, connection with equipments as

required, testing and commissioning of GI pipe

conforming to IS-1239 , Medium Duty with coupling,

tee, bend, union, elbow, flanges , etc as all required

fittings for connection complete with gaskets,

hardware, and required accessories as per IS &

4.1.2 Size : 150 mm NB (on Header for Air Valve Piping 10 RMT 1,404.00

and Header drain Pipe)

5.1.1 DEWATERING PUMPS 2 Nos. 23,720.00

Supply, erection, testing and commissioning of

Horizontal Mono-Submersible Pump set (Drain

pump) as per IS: 14220 / 1994 & its latest amendments

of following duty parameters with suitable

submersible motor as per IS: 9283 / 1994 & its latest

amendments working on 3 ø, 415 V ± 10%, 50 ± 3%

Hz power supply, rated speed 2900 RPM of following

duty capacity. Material of Constructions: Impeller-

High tensile brass / LTB II; Casing- CI FG 260; Pump

& Motor shaft- SS 304; Bearing Bush- LTB III with

CI casing & impeller, including necessary accessories

and hardwere etc., cable suitable for 3 phase, 415 V,

50 Hz AC supply with min. 3 HP motor and necessary

safety features along with pump monitoring unit for

auto stop facilities, in-built low level float switch to

prevent dry running of pump and interlocked with

starter for pump trip, starter panel. 15 m cable for

motor to starter panel. Supporting arrangement for

pump and other required accessories.

Capacity: 30 m³/hr

6.1.1 E.O.T. CRANE WITH HOIST 1 Nos. 5,54,250.00

Providing & erecting Single girder type fully

electrically operated E.O.T. crane with electrically

operated hoist, class II duty, geared travelling trolley

with seven meter lift complete with long travel rail

track (40 mm sq. bar), moving or cross girder, all three

motions electrically operated by suitable rating motor

IP 54, control panel & down pendant control block,

brake, safety device, cables form motor to starter panel

& other required accessories & tested as per IS

Specifications.EOT Crane with single/Box type girder

having motorised motion in all three directions,

manufactured as per IS - 807, IS 3938 & IS - 3177

class-II, complete with electrically operated hoist,

geared trolley, cross girder, rail track, brake, wire rope

drum, motors, safety device, pendant push button,

starter panel, cables from motor to starter panel and all

other required accessories like limit switches, panel,

power supply system (Fastoon cable type), fasteners,

epoxy painting, etc. and tested to 25 % over load

complete as per specifications.Note: Minimum as

specified capacity or higher as per requirement such

that EOT crane capacity is min.1.25 times of the

pump, motor OR single heaviest component to be

lifted within pump house.Capacity : 3 Ton. (for Pump

Room)Lift : 10.00 m (max) (or as per actual site

condition)Span: 9 m-12 m (or as per actual site

condition)Bay length: 30.0 m (max.) (or as per actual

site condition)

7.1.1 CHLORINATION SYSTEM 2 Plant 2,10,642.00

SITC of wall mounted, FRP cabinet type, Vacuum

operated Chlorination plants with required piping,

fitting, valves, safety and testing kit, etc. Complete

arrangement shall be as per attached standard drawing

for one complete system combaining the Two plants

complete in all respect as per IS and as per

specsification(Without Chlorine Cylinder).Capacity:

5 kg/hr. for each plant making one complete plant as

per attached standard drawing and shall include the

followings:(1) 1 No. Submersible Pump motor set

with continuous Cable from pump to starter panel

without any Joint with proper conduit piping and

clamping. (2) 1 No. Diffusers, (3) 1 No. Ejector, (4)

No Chlorinator , (5) 1 No. Vacuum Regulators, (6)

No. Strainer , (7) 5 Nos. Isolation Ball Valves , (8)

Non Return Valve, (9) 1 Nos. Yoke clamp (for

cylinder), (10) 1 No. Pressure Gauge with require

piping and isolation valve, (11) 1 No. Chlorine Gauge

at Cl2 manifold (12) 1 Lot of piping, fittings, valves &

instruments, (13) Vaccum Gauge , 14) MS support of

50 mm x 50 mm x 4 mm thk, (15) 3C copper armour

power cable from PMCC panel to Chlorine room of

required size with proper piping & Clamping as

equired., (16) 1- lot inter connecting piping of

identical pipe size of Cl2 booster pumps delivery line

with isolation valve, (17) 1 No. common Starter panel

with TPNB MCB with necessary cabling & electrical

connections etc. and other necessary items as per IS &

Tender Specification and Data sheet for Cl2 booster

pumps, (18) 1 no common 3/4" Cl2 gas manifold of

Carbon steel suitable for two cylinder,

7.1.2 Supply of safety kit & testing as specified in the 1 Set 83,241.00

specifications.

(1) 1 Set Chloroscope

(2) 1 set. Air breathing apparatus for 45 min as per IS

with O2 bottle,

(3) 1 set. Emergency tool kit

(4) 1 No. Amonia Torch

7.1.3 AUTO SHUT OFF CHLORINE CYLINDER 1 Set 9,45,000.00

SITC of Automatic Chlorine cylinder shut off valve

for single chlorine cylinder (100 kg) for chlorination

system comprising of :

01) 2 No. Pneumatic Auto shut off chlorine cylinder

route valve with actuator system with Air line filter,

Solenoid Valve, Air motor, Yoke clamp, etc. of

required capacity , size, rating

02) 1 Lot, Control panel cum PLC, HMI display with

interconnecting cables/wiring for Auto Shutt Off

chlorine Valve of Cylinder,

03) 1 No, Air Compressor

04) 1 Lot, uPVC-SCH 40, Air piping for Auto Shut off

valve as required,

05)1 No Chlorine leak detector of 0-10 ppm capacity

06) 1 Lot, Interconnecting instrument & Power cable,

07) 1 No. Industrial Hooter,

7.1.4 AUTOMATIC LEAK CHLORINE DISSOLVING 1 Set 6,70,950.00

SITC of automatic leak chlorine dissolving system in

caustic neutralisation tank for (100 kg) cylinder for

chlorination system comprising of :01) 2 Nos. FRP

Hood for 100 kg Cl2 Cylinder02) 1 no CF Air

Blower03) 1 Lot Flex. PVC ducting Pipe,04) 1 No.

uPVC SCH 40- Diffuser,05) 1 No. Relay based

Control Panel06) 1 Lot Cable and Cable Tray for

Blower07) 1 No. PP + FRP Tank for Caustic

storage08) 1 Lot PP Isolation Ball Valve for Tank

Overflow/Drain09) 1 Lot Hadware, jointing & misc.

items as required to complete the work in all respects

& Civil Foundation.

7.1.5 TRAY FOR CHLORINE SOLUTION uPVC 100 RMT 357.00

Providing & Fixing approved make Perforated C type

tray made from CR sheet along with required

accessories to sustain the weight of uPVC pipe with

bends, tees and clamps for fixing of uPVC pipe and all

the fittings as required as per site condition. The

Perorated type tray shall be single or double needed as

per required and as per IS 2062/1079 and shall be

coated with hot deep galvanised as per IS 2629/4759

with coupler plate/Fish plate and GI hardware like nut-

bolt and washers, etc. erected providing support as per

specification and as per instruction of E-I-C.

Size: 100 x 50 x 1.5 mm thk

8.1.1 Providing, Supplying at site of work with freight, 2000 Kg. 64.83

loading, unloading carting, etc. including all taxes and

duties complete such as joints, channels, angles,

plates, iron rails, etc. below 10 mm thickness as per

relevant IS and as per specification

8.1.2 Labour Charges for lowering, laying, Fixing with 2000 Kg. 11.36

fabrication various size section of MS such as joints

channel, angles, plates, etc Complete as per relevant

IS and as per specification.

9.1.1 DISMANTLING, CARTING AND STACKING 1 Job 60,000.00

(Mechanical Items)

Dismantling of all Existing HSCF Pump-Motor

set,SCF Pumps, existing Valves, DPCV, Drain

Pumps, Pipes and Specials (Tees, Band etc) etc. of

Existing HSCF Pump House covering with Plastic and

packing in wooden box with all required accessories

and transportation & stacking at AMC store / site or as

per instruction given by the engineer In-Charge.

9.1.2 DISMANTLING, CARTING AND STACKING 1 Job 60,000.00

(Electrical Items)

Dismantling of all existing Transformers, HT Panel,

APFC Panel, All Cubicle panels, Cables, Cable Trays,

lighting fixtures, existing lighting wiring including

loading, shifting & unloading at location in plant

compound as directed by Enng. in charge of AMC.

TOTAL ESTIMATE OF MECHANICAL WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Miscellaneous Civil works for Existing Water Distribution Station at

Work Gujkomasol at South Zone of AMC.

INSTRUMENTATION WORK

SR. NO. ITEM QTY UNIT AMOUNT

1.1.1 PRESSURE MEASURING SYSTEM 7 Nos. 1,412.00

Supply, installation, testing & commissioning of

Bourden type Pressure Gauge glycerene filled having

150 mm dial with necessary fittings/accessories

(Manifold valve, nipples, etc. shall be in SS 316 only)

as per specifications & complete in all respects.

Range : 0 - 6 kg / sq.cm.

(At Each Pump delivery and 01 Nos. for Header)

1.1.2 Supply, installation, testing and commissioning of 6 Nos. 29,147.00

Blind Pressure Transmitter along with, manifold

valve, required fittings, tubing (all valves, fittings,

tubings, etc. shall be in SS 316 only) all accessories,

hardware, etc. complete in all respects as per

specifications and having following measurement

Range : 0 - 6 Kg/cm²

(At Each Pump delivery )

1.1.3 Supply, installation, testing and commissioning of 1 Nos. 29,147.00

Pressure Transmitter along with, manifold valve,

required fittings, tubing (all valves, fittings, tubings, etc.

shall be in SS 316 only) all accessories, hardware, etc.

complete in all respects as per specifications and having

following measurement ranges:

Range : 0 - 6 Kg/cm2 (On Main Header)

2.1.1 LEVEL MEASURING SYSTEM 1 Nos. 59,436.00

Supply, installation, testing and commissioning of

Ultrasonic type Level Transmitter along with all

required accessories, hardware, hardware, etc. complete

in all respects with local and remote display, as per

specification. The scope also includes providing 4"

flanged , puddle pipe approximate 300 mm long

including fixing of the same in civil structure slabe of

pump house for mounting of level Transmitter.The

work also include all necessary work like make

hole,repair / modificationin existing slab, etc.Level

Transmitter having following measurement ranges for

liquid (Water) application:

Meas. Range: upto 6 m (at any one compartment of

2.1.2 Supply, installation, testing and commissioning of 1 Nos. 12,802.00

Float type Level Switch along with 10 mtr. Cable and

WP Junction Box (at wet well for dry run protection of

pumps) complete in all respects and as per

specification.The scope also includes providing 4"

flanged , puddle pipe approximate 300 mm long

including fixing of the same in civil structure slabe of

pump house for mounting of level switch.The work also

include all necessary work like make hole,repair /

modificationin existing slab, etc.

Meas. Range: upto 6 m (at any one compartment of

sump for dry run protection of pump)

2.1.3 Supply, installation, testing & commissioning of Float 1 Nos. 17,718.00

& Board type level indicator along with all

accessories, hardware, etc.

complete in all respects as per specifications and having

following measurement ranges:

Meas. Range: upto 6 m (at any one compartment of

3.1.1.1 ELECTRO MAGNETIC FLOW METER 1 Nos. 14,23,150.00

Supply of remote type Full Bore Electromagnetic flow

meter comprising of IP-68 Sensor, IP-65/66 remote

transmitter with 10m cable between sensor and

transmitter,Panel mounted flow indicator cum Totalizer

along with all mounting accessories, hardware, etc.

complete in all respect and as per specs and shall have

following size and measurement range. The scope also

includes necessary connection with header pipe.Type

of Sensor- Zero DN Full Bore typeMeter Size :

mm (At Pump Delivery Header of HSCF Pump)Pipe

size: 900 mmPipe Material : C.I. / M.S.

3.1.1.2 ELECTRO MAGNETIC FLOW METER 1 Nos. 10,000.00

Installation, testing and commissioning of remote type

Full Bore Electromagnetic flow meter comprising of IP-

68 Sensor, IP-65/66 remote transmitter with 10m cable

between sensor and transmitter,Panel mounted flow

indicator cum Totalizer along with all mounting

accessories, hardware, etc. complete in all respect and

as per specs and shall have following size and

measurement range. The scope also includes necessary

connection with header pipe.

Type of Sensor- Zero DN Full Bore type

Meter Size : 900 mm (At Pump Delivery Header of

Pipe size: 900 mm

Pipe Material : C.I. / M.S.

4.1.1 INSTRUMENT CABLE & ACCESSORIES 400 MTR 147.00

'Supply, Laying, Installation, Connection, Termination,

Testing & Commissioning of Instrument Cables, along

with cable glands, lugs, cable trays, required junction

boxes, fittings and accessores as per specs.

The unit rate shall include

a. Supply, loading & unloading of the cable at site from

B. Shifitng of cable from site store to place of

c. Fixing of cable clamps, brackets, supports, route

markers etc. where ever required to fix the cables safely.

d. Excavation, back filling and levelling of ground

alongwith laying of fine sand, protection bricks and

other necessary civil material for laying cables outside

e Testing and submission of sketches & reports of all

the cables laid.

Cable Length is Approx. Provide as per Actual Site

4.1.2 CONTROL CABLE 150 MTR 128.00

Cable Length is Approx. Provide as per Actual Site

4.1.3 SIGNAL CABLE 500 MTR 150.00

Cable Length is Approx. Provide as per Actual Site

4.2.1 INSTRUMENT CABLE TRAY 100 MTR 302.00

GI Perorated type cable tray shall be made out of

galvanized MS sheets of 2.0 mm thickness with

required asccessories . All material shall be Hot dip

galvanised (816 g/m2) as per IS 2629 as mentioned in

specification and tray hardware shall be in GI.50 x

mm - Perforated typeCable Length is Approx.

Provide as per Actual Site Requirements.

4.3.1 CABLE END TERMINATION AND 20 Nos. 151.00

'Supply, fixing, connection, testing and commissioning

of double compression brass cable glands and crimping

type Bimetalic lugs / sockets with necessary tools and

equipments as specified in specifications and IS

complete in all respects. The glands and lugs / sockets

shall be suitable for cable size and type mentioned

above. The job also includes earthing the glands and

armour of the cable with common earth bar or flexible

copper mesh as applicable.

4.3.2 CONTROL CABLE 20 Nos. 143.00

4.3.3 SIGNAL CABLE 20 Nos. 135.00

TOTAL ESTIMATE OF INSTRUMENTATION WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Miscellaneous Civil works for Existing Water Distribution Station at

work Gujkomasol at South Zone of AMC.

ELECTRICAL WORK

ITEM QTY UNIT AMOUNT

1.1.1 H.T. INDOOR SWITCH GEAR PANEL: 1 Set 13,15,680.00

Supply, Installation, Testing and Commissioning of

11 kV, 500 MVA, 630A, Indoor, Extensible type,

Horizontal draw out, Motorised spring charging

mechanism, 3 breaker Vacuum Circuit Breaker

Panel (1 No. Incomer + 2 Nos. outgoing), with EC

grade copper busbars along with required Resin cast

CT Dual primary & secondary, Cl: 0.5/5P10,

15VA, Digital MFM with RS 485 with 3 Line

Display, Class-0.5s and PT (dual secondary)

Cl:0.5/3P, min 200VA or higher for metering and

protection, 110V DC power pack for individual

incoming and outgoing feeder, Annunciator,

Hooter, Indicating lamps, Numerical Protection

relay (Current & Voltage Based) with RS 485 with

combined protection for 3O/C+1E/F, S/C, Under &

Over Voltage, Tfr. Protection Aux. relay etc. High

speed tripping relay, Trip ckt supervision relay,

Fuse failure relay, Digital Power factor meter,

Ammeter, Voltmeter (Only I/C), A/M switch

suitable for PLC/SCADA etc. complete in all

respects as per IS, Specification.

1.2.1 H.V. CABLES 150 Mtr 1,261.00

Supply, laying, testing & commissioning of 11 kV,

3C x 240 sq.mm.XLPE (UE) armoured H.V Cable

stranded Aluminium conductor, galvanised steel

flat strip/ round wire armoured, extruded PVC type

ST2 sheathed, heavy duty cable conforming to

IS:7098 (Part-2) & IEC:60502(Part-2).

1.2.2 Supply, Installation, Testing and Commissioning of 4 Nos. 6,985.00

the Heat shrinkable type Indoor H.T.cable end

terminations suitable for 11 kV, 3C x 240 sq.mm.

XLPE (UE) armoured cable including necessary

earth connectivity connection, material &

consummables making the termination/ joint

complete ensuring the joint resistance is within the

permissble limit as per IS.

1.2.3 Supply, Installation, Testing and Commissioning of 2 Nos. 11,487.00

the Heat shrinkable type outdoor H.T.cable end

terminations suitable for 11 kV, 3C x 240 sq.mm.

XLPE (UE) armoured cable including necessary

earth connectivity connection, material &

consummables making the termination/ joint

complete ensuring the joint resistance is within the

permissble limit as per IS.

2.1.1 DISTRIBUTION TRANSFORMER 2 No 40,84,500.00

SITC of Outdoor type, Three phase, oil immerged,

11 / 0.433 KV, Energy Efficiency Level -2,

Distribution transformer of 800 KVA & voltage

ratio, copper double wound, vector group - Dyn11,

HV delta connected & LV star connected with

neutral brought out connected to provide separate

earthing terminals, bushing / cable box on HV side

and cable box on LV side suitable for cables or bus

duct as per requirement with standard fittings,

conforming to IS: 1180 (Part-1) / 2021 with its

latest amendment including first fill of transformer

oil & following accessories.(a) Oil conservator with

filling holes with cap and prismatic oil level gauge,

(b) Silica Gel dehydrating breather charged with

silica gel, (c) Oil drain cum sampling valve with

plug(d) Oil filter valve, (e) Lifting Eyes / Hooks /

Lugs, (f) Two earthing terminal, (g) Diagram and

rating plate, (h) Air release plug, (i) Explosion vent

with diaphragm(j) Thermometer pocket, (k) Four

bi-directional plain roller with base channel with

hauling holes, (l) Fixed / Separate type radiator

banks , (m) Off circuit externally operated tapping

switch (For rating < 1000 kVA), (n) 100 mm stem

type oil temperature indicator (For rating <

kVA), (o) Bucholtz relay with shut off valve (For

rating ≥ 500 KVA), (p) 150 mm dial type oil

temperature indicator with Alarm / Trip contact

(For rating ≥ 500 kVA), (q) 150 mm dial type

winding temperature indicator with Alarm / Tip

contact (For rating ≥ 1000 kVA), (r) Marshalling

box (For rating ≥ 500 kVA), (s) 150 mm dia.

magnetic type oil gauge (For rating ≥ 1600 kVA)(t)

Inspection cover & Jacking lugs (For rating ≥

kVA)kVA). With off circuit tap changer ± 7.5% in

steps of 2.5%Maximum Total Losses (kW) @ 50%

/ @ 100% / % Imp(One No. of Transformer

should be witness for Heat Run Test to the

2.1.2 Supply and levelling of transformer yard using 75 Sq.m. 400.00

gravel, fine sand and other required filing material,

enmarked for the switchyard including removing of

trees or boulders if any etc. The general level of the

yard shall be at a convenient level for movement of

man and material and it should match with FGL and

as per Specification and Drg.

2.1.3 Supply and Installation of Chain link fencing 40 RMT 1,250.00

around switch yard etc. as per Specification and

2.1.4 SITC of 2.5 mtr wide gate with required material as 2 Nos. 12,500.00

per Specification.and as per Specification and Drg.

3.1.1 LOW VOLTAGE (LT) PANEL BOARD 1 Nos. 78,96,000.00

SITC of PMCC Panel (50kA) complete in all

respects as per SLD / Specification / IS and

including following as minimum:(1) Two Nos. FP

1250 A Microprocessor EDO ACB for I/C with

Digital Voltmeter with Voltmeter Selector Switch,

Digital Power Factor Meter, Digital Ammeter with

Ammeter selector switch, MFM with RS-485, R, Y,

B, on, off, trip Indicating lamps & ON, E-STOP,

Reset Pushbutton, etc. (2) One no. FP 1250 A

Microprocessor EDO ACB for Bus-Coupler. (3)

1250 A TPN Main busbars. (Main & Auxiliary bus-

bars size with current density 0.8A/Sq.mm) (4) Six

Nos. (3W + 3S) Soft starter for min. 160 kW Motor

or higher as per pump Manufacturer reco. with

suitable derating and with 400A TPN Motor Duty

MCCB, 300A AC3 Inbuilt/external bypass

contactor, Ten channel temperature scanner with

potential free contacts, fast acting fuse, MFM with

RS-485, door display key pad & digital MPR+SPP

with CBCT, on, off, trip Indicating lamps & ON, E-

STOP, Local/Remote, Auto/ Manual selector

switch & LCS for Pump- MOV Actuator with

Indication & push button etc.MOV Actuator MCB

shall be in Relevant Pump Soft Starter Feeder.(5)

Two nos. 320 A TPN Microprocessor MCCB

feeder for APFC Panel.

(6) 3 nos. 320 A TPN microprocessor MCCB feeder

for 2 Nos for Borewell Feeder & 1 No. for spare.

(7) One Nos. 200A TPN microprocessor MCCB

Feeder for DVAR Compensator Panel with All

required Indication Lamps and Push Buttons.

(8) Three nos. 63ATPN MCCB feeders (for PDB -

Auxiliary accessories load & 2 Nos. Spare)

(9) Four nos. 32A TPN MCCB spare feeder

(10) One no. Outdoor lighting LDB feeder with

32ATPN 'C' curve MCB with 32A contactor &

(11) 6 nos. 32A 'C' curve MCB feeders (for Indoor

and Outdoor LDB, 1 no. Chlorination System,

nos. spare feeders)

(12) 6nos. 16A DP MCB feeders (for single phase

supply for 2nos. X'mer marshaling box, HT Panel

(13) 6 nos. 1250A/1A, Cl.-0.5 metering CT

(14) 3 nos. 1250A/1A, Cl.-0.5 Summation CT

(15) 2nos. 1250A/1A, Cl.-0.5 CT for 2nos. APFC

(16) 2nos. Multiplication relay for dry run

protection of pumps.

3.1.2 DYNAMIC STATIC VAR COMPENSATOR 1 Nos. 6,24,750.00

SITC of stand/ wall mounted 200A TPN

microprocessor MCCB with Min. 100 KVAR

Dynamic Staic VAR Compesator Panel for each

Transformer to make power factor unity (not

leading or lagging) at main HT incomer in any load

conditions. Also, including All controlling and

power cable and other items as per successfully

installation required etc.

3.1.3 AUTOMATIC POWER FACTOR 2 Set 2,53,954.00

CORRECTION (APFC) PANEL:

SITC of 180 kVAR APFC Panel complete in all

respects as per SLD / Specification / IS and

including following as minimum:(1) 320 A FP

Microprocessor MCCB I/C.(2) 13 Steps

Microprocessor APFC Relay with sensitivity

10mA.(3) 1 Nos. 40 kVAR capacitor bank with

100A TP Thermal Magnetic MCCB & 40 kVAR

Capacitor duty contactor with timer.(4) 2 no.

kVAR capacitor bank with 63A 'D' curve MCB &

30 kVAR Capacitor duty contactor with timer.(5)

nos. 20 kVAR capacitor bank with 40A 'D' curve

MCB & 20 kVAR Capacitor duty contactor with

timer.(6) 2 nos. 10 kVAR capacitor bank with 20A

'D' curve MCB & 10 kVAR Capacitor duty

contactor with timer.(7) 3 nos. 5 kVAR capacitor

bank with 16A 'D' curve MCB & 10 kVAR

Capacitor duty contactor with timer.(8) 2 nos.

kVAR capacitor bank with 16A 'D' curve MCB &

10 kVAR Capacitor duty contactor with timer.(9)

nos. 1 kVAR capacitor bank with 16A 'D' curve

MCB & 10 kVAR Capacitor duty contactor with

timer.(10) All capacitors shall be Gas Filled type

with dielectric losses ≤ 0.2w/kVAR. (Suitable for

0.95 or better Correction).

3.2.1 SITC of Lighting Distribution Board (LDB) as 2 Nos. 6,502.00

3 Phase 4 Wire TPN, 6 way Prewired LDB (One

each for Indoor & Outdoor Lighting) Suitable to

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB 'C' curve (9 nos.) & 16A

SP MCB 'C' curve (9 nos.)

(At Panel Room)

3.2.2 SITC of Power Distribution Board (PDB) for 1 Nos. 9,051.00

3 Phase 4 Wire TPN, 8 way Prewired MOV-PDB

for Actuator of valves power supply (For MOV

Pump delivery valves, valve at Header & spare):

Incoming: 63A TPN, MCB 'C' Curve

Outgoing: 10 nos. 32A TP MCB 'C' Curve

3.3.1 LOCAL CONTROL STATION 6 Nos. 2,800.00

SITC of Pendant type ON_OFF LCS with

pushbutton set complete with Enclosure, necessary

mounting/ fixing arrangement on wall / pipe

support etc. to be installed near motors for remote

operation, etc. as per IS and specifications.

(including structural steel) (For 6nos. Pumps)

3.3.2 SITC of Pendant type ON_OFF LCS pushbutton 2 Nos. 2,800.00

set complete with Enclouser, necessary mounting/

fixing arrangement on wall / pipe support etc. to be

installed near motors for remote operation, etc. as

per IS and specifications (including structural steel)

(For 2no. Chlorine Booster pump)

3.3.3 SITC of Local Control Station with pendant type 8 Nos. 4,500.00

Open_Stop_Close pushbutton set and with Open,

Close, Trip & Local / Remote Indicating Lamps

complete with Enclouser, necessary mounting/

fixing arrangement on wall / pipe support etc. to be

installed near motors for remote operation, etc. as

per IS and specifications (including structural steel)

(For Delievery Valve of Each Pumps, Inlet Valve

Actuator & One for Header)

4.1.1 LOW VOLTAGE (LT) CABLES 500 Mtr 1,211.00

Supply and unloading & delivery at site, storage &

security at site of 1.1 kV, A2XFY/2XWY XLPE

insulated (IS 7098) / PVC insulated (IS 1554) AL /

Cu conductor cables as per specification & IS. The

cable when laid outside the building shall be laid

underground in excavated trench, as per specified

method and shall be laid in prepared trench on cable

tray when laid inside the building.

3.5C x 400 sq. mm. A2XFY Cable

(4Runs for Tr. 1 & 2 to PMCC Panel)

4.1.2 3.5C x 240 sq. mm. A2XFY Cable 60 Mtr 783.00

(1Runs for each APFC Panel)

4.1.3 3C x 120 sq. mm. A2XFY Cable 1000 Mtr 354.00

(2 Runs for PMCC Panel to each 160 kW Pump

4.1.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB with 250 Mtr 78.00

TPN MCB at Sump & Pump House, Outdoor LDB,

Indoor LDB, 1nos. MOVPDB)

4.1.5 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN 500 Mtr 81.00

MCB for Chlorination Room, TPN MCB at PMCC

room & Pump house maintenance floor & Pump

House floor, Chlorination system, Motor Operated

4.1.6 3C x 2.5 sq. mm. 2XWY/2XFY Cable (For Outdoor 500 Mtr 86.00

light / St. Light)

4.1.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each 350 Mtr 177.00

Motor space heater(as required), HT Panel, for

2nos. APFC CT & X'mer marshaling box Single

Phase Supply, for level switch)

4.1.8 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 2 Nos. 200 Mtr 130.00

Dewatering Motor LCS & 1no. Chlorine Booster

4.1.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 350 Mtr 115.00

Motor LCS with Ameter)

4.1.10 10C x 1.5 sq.mm. 2XWY/2XFY Cable (2Run Tr. to 200 Mtr 230.00

HT Panel control cable)

4.1.11 12C x 2.5 sq.mm. 2XWY/2XFY Cable (For 250 Mtr 393.00

Actuator LCS of Each Main Pump and Header)

4.1.12 10Tride x 1.0 sq.mm. individual triad and overall 300 Mtr 460.00

shielded with aluminum mylar tape Signal Cable

for RTD & BTD of motor (1Run Motor to S/S

4.2.1 CABLE END TERMINATION AND 16 Nos. 1,441.00

SITC of Double compression Weather proof type

Ni-Plated brass cable glands and crimping type

Bimetalic lugs / sockets with necessary tools and

equipments as specified in specifications and

IS.The glands and lugs / sockets shall be suitable for

cable size and type mentioned below & as per

specificaitons.1) Earthing the glands and armouring

with earthing clamp and jumper and also

connecting to common earth bar.2) The job also

includes, if necessary, supply & fixing of extension

busbar of same material on MCCB or panel board

terminal / connector to connect more than one no.

of parallel cables or to connect higher size cable to

lower size unit. The job also includes earthing the

glands and armour of the cable with common earth

bar or flexible copper mesh.(Cable termination qty.

shall be as per site requirement)3.5C x 400 sq. mm.

A2XFY Cable (4Runs for Tr. 1 & 2 to PMCC

4.2.2 3.5C x 240 sq. mm. A2XFY Cable (1Runs for each 4 Nos. 860.00

4.2.3 3C x 185 sq. mm. A2XFY Cable (2 Runs for PMCC 24 Nos. 585.00

Panel to each 160 kW Pump Motor)

4.2.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB with 10 Nos. 111.00

TPN MCB at Sump & Pump House, Outdoor LDB,

Indoor LDB, 1nos. MOVPDB)

4.2.5 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN 28 Nos. 77.00

MCB for Chlorination Room, TPN MCB at PMCC

room & Pump house maintenance floor & Pump

House floor, Chlorination system, Motor Operated

4.2.6 3C x 2.5 sq. mm. 2XWY/2XFY Cable (For Outdoor 60 Nos. 76.00

light / St. Light)

4.2.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each 32 Nos. 75.00

Motor space heater(as required), HT Panel, for

2nos. APFC CT & X'mer marshaling box Single

Phase Supply, for level switch)

4.2.8 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 2 Nos. 6 Nos. 150.00

Dewatering Motor LCS & 1no. Chlorine Booster

4.2.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For 7 Nos. 16 Nos. 75.00

Each Motor and Header LCS with Ameter)

4.2.10 10C x 1.5 sq.mm. 2XWY/2XFY Cable (2Run Tr. 1 8 Nos. 185.00

& 2 to HT Panel control cable)

4.2.11 12C x 2.5 sq.mm. 2XWY/2XFY Cable (For 20 Nos. 105.00

Actuator LCS of 6 nos. Pump and Header)

4.2.12 10Tride x 1.0 sq.mm. individual triad and overall 18 Nos. 185.00

shielded with aluminum mylar tape Signal Cable

for RTD & BTD of motor (1Run Motor to S/S

5.1.1 CABLE TRAY 70 Mtr. 558.00

SITC of GI ladder type cable trays with side

channels of size - 75 x 15 x 15 mm/ 100 x 15 x

mm & rungs of size - 35 x15 x 15 mm spaced at

mm apart, fabricated from 2 mm thick sheet steel in

standard length of 2.5 meter, duly hot dipped

galvanized after fabrication as per IS 2629- 1989/

IS 4759-1984 including accessories such as coupler

plates/ fish plates, bends, tees, reducers, elbows,

covers and electro- galvanized hardware etc,

erected on existing support as per specification and

instruction of engineer in charge.600 x 100 mm -

5.1.2 450 x 100 mm - Ladder type 80 mtr 506.00

5.1.3 300 x 100 mm - Ladder type 80 Mtr 456.00

5.1.4 150 x 100 mm - Ladder type 150 Mtr 402.00

5.2.1 Supply & laying GI perforated type cable trays 40 Mtr. 901.00

with returned edge/ flange, fabricated from 2.0 mm

thk sheet steel in the standard length of 2.5 mtrs,

duly hot dipped galvanized after fabrication as per

IS 2629-1989 / IS 4759-1984 including accessories

such as coupler plates/ fish plates, bends, tees,

reducers, elbows, covers and electro-galvanized

hardware etc, erected on existing support as per

specification and instruction of engineer in charge.

600 x 35 mm x 2.0 mm thick

5.2.2 450 x 35 mm x 2.0 mm thick 50 Mtr 697.00

6.1.1 Cable Trench, Laying & Installation of Cable: 100 Mtr 55.00

Making cable trench in soft soil of suitable width of

90cms deep for laying cable all over the run and

back filling the same and making the surface as

normal ground as per IS & Specification. (For

laying HT & LT cable in ground)

6.1.2 Cable Covering in Trench: Cable Covering with 100 Mtr. 139.00

second class bricks or cement tiles laid cover the

cable crosswise & also on both side with covering

of 7.5cms. Layer of sand above & below cable (16

bricks per meter.) as per IS & Specification. (For

HT & LT cable trench)

7.1.1 Supply, laying and erection of 120 mm approved 180 Mtr 136.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground /

road surface for enclosing cable and back filling the

same to make ground as per original. (For HT & LT

7.1.2 Supply, laying and erection of 90 mm approved 150 Mtr 95.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground /

road surface for enclosing cable and back filling the

same to make ground as per original. (For Pump

7.1.3 Supply, laying and erection of 50 mm approved 150 Mtr 62.00

make Double Walled Corrugated pipes (DWC) of

polyethelene (confirming to IS 14930 II) with

necessary connecting accessoies of same material at

required depth for laying of cable below ground /

road surface for enclosing cable and back filling the

same to make ground as per original. (For LT &

Street light cables).

8.1.1 CHEMICAL EARTHING SYSTEM 6 Nos 10,489.00

SITC of chemical earthing with earthpit of

minimum bore size dia. 25mm Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS-3043:1987 made of corrosion free G.I. Pipes

having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having

200-250 Micron galvanising or copper coated solid

steel road / flat strip type connection terminal 14mm

dia with constant ohmic value surrounded by highly

conductive corrosion resistant chemical compound

with high charge dissipation suitable for electrical

installation covering HT Panel, Transformer

Neutrals, Lightning arrester Earthing, A.C. Plant &

Sensitive computer system (like Automation,

SCADA) & of 3Mtr. length of Pipe with two nos.

25Kg. bag of Back filling compound.

(2nos. Each For body of Tr.-1 & 2, HT Panel)

8.1.2 SITC of chemical earthing with earthpit of 12 Nos 7,025.00

minimum bore size dia. 225mm Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS-3043:1987 made of corrosion free G.I. Pipes

having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having

200-250 Micron galvanising or copper coated solid

steel road / flat strip type connection terminal 14mm

dia with constant ohmic value surrounded by highly

conductive corrosion resistant chemical compound

with high charge dissipation suitable for electrical

installation of 11 kV & 440V of 2Mtr. length of

Pipe with one no. 25Kg. bag of Back filling

(2nos. Each for body of Tr.1 & Tr. 2, PMCC &

8.1.3 SITC of pipe type earthing having 150 cms long and 12 Nos 365.00

2.5cms dia. Galvanised iron pipe with coupling and

buch buried in specially prepared earth pit complete

with necessary 8 SWG earth wire (For 10 nos. St.

light Pole Earthing & 2nos.Gate light earthing)

8.1.4 SITC of 50mm(w) x 6mm(T) etc. sizes as required, 530 Kg 77.00

HOT deep GI Strip including supply & fixing using

GI spacers, saddles when laid inside the building

and inclusive of excavation & refilling of earth

when laid outside the building & interconnection

with earth pit & all electro-mechanical equipments.

(50X6 G.I Strip wt.2.3 kg/m, 2.3x230Mt.=529kg.)

(HT Panel, Transformer, Motors etc.)

8.1.5 Supply, laying and erection of 25 mm(w) x 6mm(T) 60 Kg 77.00

etc. sizes as required, HOT dip galvanized GI Strip

including supply & fixing using GI spacers, saddles

when laid inside the building and inclusive of

excavation & refilling of earth when laid outside the

building & interconnection with earth pit & all

electro-mechanical equipments.

(25X6 G.I Strip wt.0.6 kg/m, 0.6x 150 Mt.=90kg.)

(LT & APFC Panel etc.)

8.1.6 Supply, laying and erection of 40mm(w) x 6mm(T) 114 Kg 787.00

etc. sizes Copper Strip including supply & fixing of

bolts, saddles when laid inside the building and

inclusive of excavation & refilling of earth when

laid outside the building & interconnection with

earth pit & Tr. nutral. (40X6 Cu. Strip, 2.28 Kg/m,

8.1.7 Supply, laying and erection of 40 mm(w) x 6 188 Kg 77.00

mm(T) etc. sizes as required, HOT dip galvanized

GI Strip including supply & fixing using GI

spacers, saddles when laid inside the building and

inclusive of excavation & refilling of earth when

laid outside the building & interconnection with

earth pit & all electro-mechanical equipments.

(40X6 G.I Strip wt1.88 Kg/m, 1.88 x 100=188Kg.)

8.1.8 SITC of HOT Dip Galvanized iron strip wire 8 21 Kg 77.00

SWG (For LDB, PDB, LCS, St.Light Pole, etc.)

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 200Mt.=21)

9.1.1 INTERNAL WIRING 350 Mtr 115.00

SITC of Mains & outlet points wiring with 1.1 kV

grade FRLS PVC insulated ISI marked flexible

stranded copper conductor wires with medium

class min. 25mm. dia. Rigid PVC pipe and

accessories to be erected concealed in / to be run on

surface / wall / ceiling with following sizes as

mentioned below. The unit rate wirings shall be

with connector, PVC junction box, wires, holder,

ceiling rose, angle holder, switch, sockets, switch

board, brass chromium / cadmium plated machine

screws, phase and neutral wires, green Earth

continuity wires etc. as required to complete wiring

from LDB panel to the final outlet termination

points. The wiring shall be as per IS:732,

IS:4648 and as per tender specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

9.1.2 (b) SITC of Mains wiring with 3 wire 2.5 sq.mm as 200 Mtr 134.00

per tender specification & IS.

9.1.3 (c) SITC of Mains wiring with 4 wire 1.5 sq.mm as 200 Mtr 123.00

per tender specification & IS.

9.1.4 (d) SITC of Mains wiring with 4 wire 2.5 sq.mm as 200 Mtr 158.00

per tender specification & IS.

9.1.5 SITC of Point wiring for Light / fan / Bell / 90 Nos 351.00

Primary Point with 2nos. 1.5 sq. mm & earth wire

of 1.5 sq. mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multistrand copper

wires, pipe to be erected concealed in flushed

on wall / ceiling, complete with 6A Tissino Type

ISI marked flush type switch / bell push &

accessories erected on metal / PVC Box covered

with 3 mm thick PC (Polycarbonate) / Acrylic

sheet with necessary lamp holder / ceiling Rose /

H. D. connector as directed with medium class

Rigid PVC pipe & accessories.

(A) With Medium class Rigid PVC Pipe and

Accessories erected Flushed on Wall/celling

9.1.6 SITC of 6A independent Plug with 2 nos. 1.5 sq.mm 7 Nos 310.00

Cu. Mains size wiring & earthwire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to be

erected on wall / ceiling, complete with ISI marked

3 / 5 Pin socket and tissino type switch erected with

earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) /

Acrylic sheet. (1 No. Torrent HT Room, 1 No. for

AMC HT Room, 2nos. at Pump House, 2 Nos. LT

Room & 1 No. Chlorination Room)

9.1.7 SITC of One 300/380 mm dia. Ex fan 16A 5 Nos 601.00

independent Plug point near Ex. Fan with 2nos.

4 sq.mm Cu. Mains size wiring & earthwire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper

wires with medium class Rigid PVC pipe and

accessories to be erected on wall / ceiling,

complete with ISI marked 3Pin socket and tissino

type switch erected with earth continuity

connection erected on Metal / PVC box covered

with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

Plug point shall be near Ex.Fan. (For 4 Nos. Pump

House Room and 1 No. Chlorination Room)

9.1.8 SITC of 15A independent Plug with 2nos. 4 sq.mm 7 Nos 601.00

Cu. Mains size wiring & earthwire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires with

medium class Rigid PVC pipe and accessories to be

erected on wall / ceiling, complete with ISI marked

3 / 5 Pin socket and tissino type switch erected with

earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) /

(For Torrent HT Room, AMC HT Room,

Chlorination Room, Pump House, LT Room)

9.1.9 SITC of Single Phase 20A 3 Pin Metal clad 3 Nos. 845.00

Industrial Type Socket with plug top and 20A

SPMCB, suitable for flush mounting, in 16 SWG

MS box of suitable size and covered with 3 mm

thick electrical grade hylam sheet or eqivalent ISI

marked Electrical grade bakelite sheet and

earthing with 2.5 sq.mm insulated copper wire run

inside the conduit including interconnections etc.

complete as required.

(2 No. Pump House, 1 no.LT Room)

9.1.10 SITC of 415V Four Pole MCB Switch (C Curve) 5 Nos 590.00

having 10KA breaking capacity & confirms to

IS:8828 having capacity, 32A, CAT-III

(For House, LT Room, For Elect. Hoist at Pump

House & Chlorine Room)

10.1.1 LED LIGHT FIXTURES: 18 Nos 530.00

SITC of Indoor wall mounting LED indoor

fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA polyester powder

coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company

mark/name 120 to 300 V,Power Factor more than

Uniformity ratio >0.7, Luminaire efficacy>

lumens/watt ,LED driver efficiency > 85 %(Each

fitting required LM-79 & LM-80 Certificates)36

Watt or up to 25% higher wattage Tube Light

with integral / non-integral driver, Surge-4KV,

IP-20, 4 feet, Cat-III (For Torrent HT Room/ AMC

HT Room/ LT Room/ Chlorination Room/ Pump

10.1.2 SITC of Surface mounted LED Indoor Flood 10 Nos. 5,143.00

light fittings with High power White LEDs wattage

of 1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

120 to 300 V,Power Factor more than 0.95, THD <

Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80

40 Watt Indoor Flood Light (IP-65), Surge -4KV

(for pump house, LT Panel room, Chlorination

10.1.3 SITC of 'B' class galvanised iron pipe 32 mm 10 Nos. 340.00

outside dia 45 cmslong duly welded on 20 cms x

cms x 3 mm thick M.S. base plate, erected on wall

or corner for mounting luminaire with necessary

hardware materials duly painted for wall mounting

indoor flood light fixtures on Wall of Buildings.

10.1.4 Item discription as per Sr.No.-8.1.1, SITC of 3 4 Nos. 69.00

watts LED Lamps integral type,cool white with PC

diffuser suitable for B22 LAMP holder.

(For Panel room, HT Room, Pump house &

chlorine room door)

10.1.5 1200 mm sweep ceiling fan, capacitor type, 2 Set 1,581.00

having double ball bearing 450mm down rod,

canopies, shackle, rubber bush, blades, electronic

speed regulator, suitable to operate on 230V,50Hz

AC supply conforming to IS: 374/1979.Fan shall be

painted with white colour.

(2 Nos office room, 2 Nos LT Panel)

10.1.6 380 mm sweep 1400 R.P.M exhaust fan, 7 Nos. 3,052.00

capacitor type, having double ball bearing,

M.S.blades, mounting frame, forearms, suitable

to operate on 230V,50 HZ AC supply conforming

to IS: 2312.Fan shall be painted with epoxy grey

colour controlled by one 6 A flush type switch on

board and 6A plug point near Ex. fan. With Bird Net

(For 2 Nos. Pump House Room and 1 No.

Chlorination Room, 2 Nos . LT Room, 2 Nos LT

10.2.1 EXTERNAL LED LIGHT FIXTURES & 14 Nos. 6,028.00

SITC of Wall mounted 80W LED Outdoor Flood

Light fittings with High power White LEDs

wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company

mark/name engraved or embossed 120 to

V,Power Factor more than 0.95, THD < 10 %, CCT

5000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 85 lumens/watt . LED driver

efficiency > 85 %. ( Each fittings required LM-79

& LM-80 certificates) Flood Light (IP-65), Surge

-4KV, 80 watt Cat-III(14 Nos for Area Lighting)

10.2.2 SITC of 'B' class galvanised iron pipe 32 mm 14 Nos 340.00

outside dia 45 cms long duly welded on 20 cms x

20 cms x 3 mm thick M.S. base plate, erected on

wall or corner for mounting luminaire with

necessary hardware materials duly painted for

wall mounting indoor & outdoor flood light

fixtures on Wall of Buildings.

10.3.1 Supplying and erecting 70W LED Street light 10 Nos. 5,917.00

fittings with High power White LEDs wattage of

1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/name engraved or

120 to 300 V,Power Factor more than 0.95, THD <

Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80

Street Light (IP-65), Surge -4KV, 90 watt Cat-

10.3.2 SITC of Street Light Pole, steel tubular swaged 10 Nos. 7,175.00

type, 7.5 meter long with single arm & M.S.base

plate with pipe cap and over hung 1.5 m long having

dia to suit the socket of 240V LED street light

fixtures. Street light pole unit rate shall be with (i)

Earthing of lighting poles & shall be conforming to

IS 2713 : 1980 as per specification/drawing.

10.3.3 SITC of 1.5 Mtr. single Arm Street Light pole 10 Nos. 620.00

bracket consisting of medium class MS pipe of

cms. Out side dia complete with suitable sleeve

tubing 45 cms. long M S. pipe (Medium Class).

Suitable for 76.5 mm /80mm / required size of pole

top having sufficient fastners for fixing the brackets

and having spread of 1.5.mtr. length with

deg.with vertical plane & suitable welded stays,

reducer and with check nuts complete painted with

one coat of Red oxide / PU base primer and two

coats of Aluminium / PU paint.

10.3.4 SITC of M-20 / 1:2:4 cement concrete foundation 10 Nos. 1,280.00

& 70 % PCC from bottom including excavation for

the pole of size 60 x 60 x 120 cms. Deep in below

ground level with plinth of 45 cms x 45 cms(or

cms dia x 45 cms) high upper ground level with

necessary curing and finishing in approved manner.

10.3.5 SITC of Water tight M.S.Box of size 20 x 15 x 15 10 Nos. 343.00

cms. to erect suitable kitkat fuse / MCB to be .

erected on polished wooden board inside the box

with hinged/sliding door with rubber rings and

erected on pole with suitable pole clamp, all duly

painted with one coat of red oxide and two coats of

paints and with 1no. 6A SP 'D' curve MCB.

10.3.6 SITC of cable clamp of 25 mm X 3 mm M.S. flat 10 Nos. 111.00

suitable for fixing 2nos.of armoured st. light cable

with nuts and bolts for 140 mm diameter pole.

10.3.7 SITC of 50mm Dia. 'B' class, Galvanised iron pipe 15 Mtr 323.00

having smooth finished bore of the pipe on both

ends erected nuts and bolts along the st. light pole /

wall shaping the pipe for st. light pole cable as per

site requirement. (1.5mt. Each piece x 10 nos. =

10.3.8 Painting of 7.5 mtr. street light pole with bracket 10 Nos. 332.00

complete with two coats of Aluminium paint as per

specification & tender.

11.1.1 SAFETY ACCESSORIES 4 Nos 8,586.00

SITC of following safety accessories complete

with necessary fixing brackets, other accessories

and tools etc. as required to complete the job.

Supply & Erecting carbon dioxide (CO2) fire

extinguisher of 6.5kg capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with nut &

bolts grouted in wall complete.

(for 2no. X'mer, 1no. LT Room , 1no. HT Room)

11.1.2 Supplying stand first AID box with anticeptic 2 Nos. 297.00

cream, medicine for use on wounds due burn, crepe

bandage, guage bandage, medicated ready to use

bandage (Band-aid) adhesive tape for medicinal

user, scissors, anticeptic solution (Savlon or

similar) etc.(All above contents shall be of standard

makes)(For Pump house / LT Room)

11.1.3 Providing printed instruction (First Aid) Chart 2 Nos. 129.00

both in English and Gujarati and duly framed with

front glasses, for treatment of person suffering from

electric shock.

(1no. for HT Room & 1no. For LT Room)

11.1.4 Supplying & fixing of FIRE bucket round bottom 8 Set 212.00

of 9 litres capacity made out of 24 guage G.I. sheet

with extra handle at bottom duly painted white

inside and Red outside with FIRE mark, filled with

dry sand and kept on stand provided or hung on wall

11.1.5 Supplying and erecting floor mounting stand for 1 Nos. 933.00

keeping four nos. of FIRE buckets comprising

1500 mm in length, 900 mm height frame made out

of 30mm X 30 mm X 4 mm angle iron with cross

supports for legs, welded with 4 hooks and duly

painted with one coat of red lead and two coats of

approved enamelled silver paint.

11.1.6 Supply and fixing of 30 W fluorescent lamp 3 Nos. 6,319.00

operated emergency light with maintenance free

battery for 3 hours operation during mains power

failure.LED Portable/Rechargeable flood light

having die - cast aluminium enclosure designed for

maximum thermal efficiency of 130lm luminous

efficiency at voltage supply between 140-270V

AV/12V DC at operating temperature of -20 degree

to 60degree celcius with battery back up 3-4hrs

11.1.7 Supply and laying of 12 mm thickness 1000 mm 6 Mtr 3,051.00

wide Rubber Matting as per IS 15625 and breadth

with good insulation property for 11 / 22 KV with

more length if required as per site.

11.1.8 Supply and laying of 6 mm thickness, 1000 mm 30 Mtr 990.00

wide Rubber Matting as per IS 5424 and breadth

with good insulation property for 1.1 kV with more

length if required as per site. (For PMCC & APFC

11.1.9 Providing pair of rubber hand gloves suitable for 2 Nos. 212.00

working on 11kV/ 22kV supply.

12.1.1 MISCELLANEOUS: 300 kg 64.84

Providing, Supply of Structure Steel at site of work

with freight, loading, unloading carting, etc.

including all taxes and duties complete such as

joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered plates

(below 10mm thickness) etc. required for support

structure of Elecrto-Mechanical equipments etc. for

support on floor / wall / beam / brackets etc. as per

12.1.2 Labour Charges for lowering, laying, Fixing with 300 kg 11.36

fabrication various size section of MS such as

joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered plates

etc Complete with two coats of red oxide and two

coats of approved colour shade of epoxy paint as

per relevant IS and as per specification.

12.1.3 LIASONING CHARGES FOR OBTAINING 1 Ls 25,000.00

Liasoning Charges for obtaining N.O.C from

Electrical Inspector / Statutory authority for Power

/ Ele. Installation. (Fees shall be paid by tenderer for

obtaining N.O.C. from Electrical Inspector /

Statutory authority on behalf of client and shall be

reimbursed on submission of orignial receipt to

Client). Liasoning Charges shall include preparing

required attasted documents & drawing for

obtaining NOC on behalf of client (Applicable Fees

/ deposits shall be reimburse by Client).

TOTAL ESTIMATE OF ELECTRICAL WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Miscellaneous Civil works for Existing Water Distribution Station at

Work Gujkomasol at South Zone of AMC.

MISCELLANEOUS CIVIL WORK

ITEM QTY RATE UNIT AMOUNT

Demolition of Brick work & stone masonry 15.00 544.95 Cmt

including stacking of serviceable materials and

disposal of unserviceable materials with all lead and

lift. (i) In cement Mortar

Demolition and disposal of unserviceable materials 15.00 603.23 Cmt

2 with all lead and lift.(i) Unreinforced cement

Demolition and disposal of stacking of serviceable 15.00 1,047.38 Cmt

3 materials and disposal of unserviceable materials

with all lead and lift (i) R.C.C work

Dismentling doors, windows, ventilators etc. (wood 40.00 185.85 Each

or steel) shutters including chowkhats architraves,

4 holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(i) Not

exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood 5.00 248.85 Each

or steel) shutters including chowkhats architraves,

5 holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(ii) Exceeding

3 Sq.M. in area.

Dismentling barbed wire in fencing including 250.00 66.15 Rmt

making rolls and also including dismentling fencing

posts including all earth work concrete in base and

6 making good the disturbed ground stacking useful

materials as directed and disposing as directed and

disposing of the unserviceable materials with all

Removing and scraping of old deteriorated plaster 500.00 19.38 Sq.mt

of any thickness from all Structural & Non

7 Structural member including stacking of

serviceable material and disposal of unserviceable

from site of work with all lead and lift

Supplying Electric breakar machine for RCC slab 5.00 1,071.43 Shift

or Asphalt demolishing work on site by using

operator, fuel, power supply etc. complete as

directed.(no payment should be allowed for non

working condition of machinary and for pipeline

excavation and M.H. work.allowed only for break

down work)(based on previously approved rate by

Providing and Laying of Rubber Moulded Paver 105.00 416.40 Sq.mt

Block Grey/Coloured 60 mm thick, M-35 Grade of

any size ; shape (Usually Uni-Paver Blocks) using

black trap good quality aggregate of 20 mm

nominal size for footpath, parking areas, service

lanes and other areas as mentioned in the drawing /

instruction of engineer in charge. Cost includes

formworks using rubber mould, Rate providing and

laying paver blocks as per required grading and

specification. The paver block shall be

mechanically compacted. The work of paving

blocks shall be executed in line and level by skill

mason of flooring work only. It should be laid in

such a way that the no cutting of the paver block to

be necessary. If cutting of paver block necessary

then it should be cut by machine only and carting.

The finished surface of the paver block shall have

reasonably good, plain finished. Paver blocks shall

be compacted and shall be relaid if necessary.

Gravel or such type of materials shall not be

allowed for production. Laying on 5 cms thick sand

Supplying and fixing of 300 mm-L x 150 mm-B x -

380 mm-H Kerb block for Footpath in M-20 grade

using 20 mm nominal size black trap aggregate of

Sevaliya/Timba or equivalent quality for pre-cast

blocks, reasonably exposed finish/ formwork

mould with well equipped with vibratory system for

kerb stones of approved design including curing,

etc. complete, including the cost of formwork etc.

complete. The rate shall also include necessary

10 cutting of asphalt, fixing the Kerb stones in line and

level on 5 cm thick sand bedding with necessary

equipments and materials. The rate shall also

include the flush pointing in CM (1:3) for all joints

of the kerbstones. Filling of zari alone the sides of

the kerb stone fixed with Bituminous concrete

Bituminous concrete / C.C. mixed in proper

position to flush with the road surface as directed

by Engineer in change to form a portable mixture.

Laying on 5 Cms thick sand Bedding 75.00 345.84 Rmt

Removing any kind of pavement incl stacking of 50.00 14.00 Smt

11 serviceble material disposal of unserviceble

material with 50 meter lead and lift.

Labour work for fixing above interlocking blocks 50.00 68.64 Smt

on up to 50mm th sand bedding, levelling, watering

and fixing. Rate incl. average 30cm depth for

excavation and or filling, carting away

debries/excavated material up to 5 km and cleaning

the site etc. Comp. as directed.

Excavation for foundation for loose and soft soil -

including sorting out and stacking of useful

materials and disposing of the excavated stuff up to

13 50 meter lead.

Conveyance charge of earth, lime, murrum, 30.00 408.41 Cu.m.

building rubbish, manual garbage, sludge,

excavated rock, fly ash, aggregate of any kind etc.

Upto 5.0 Km lead.

Conveyance charge of earth, lime, murrum, 10.00 417.67 Cu.m.

building rubbish, manual garbage, sludge,

excavated rock, fly ash, aggregate of any kind etc.

5Km to 10 Km lead.

Filling with available excavated earth (excluding 35.00 129.10 Cu.m.

rock) in trenches, plinth, sides of foundation in

layers not exceeding 20 cm in depth consolidating

each deposited layer by ramming and watering.

Providing and casting in situ C.C. in grade M-15 15.00 4,906.00 Cu.m.

(approx. corresp. to prop. 1:2:4) (proportions as per

mix design or as per Table 9 of IS456 2000 in

masses by weigh batching ) using granite, quartzite

trap metal of size 6 mm to 20 mm for RCC work,

17 including scaffolding centering, form work, needle

vibrated consolidation, curing comp. (excluding

cost of reinforcement and neat finishing) with

centering and shuttering/deshuttering etc. comp. for

structure for other than water retaining. Footing

(with form work)

Providing and casting in situ C.C. in grade M-15 5.00 4,730.00 Cu.m.

(approx. corresp. to prop. 1:2:4) (proportions as per

mix design or as per Table 9 of IS456 2000 in

masses by weigh batching ) using granite, quartzite

trap metal of size 6 mm to 20 mm for RCC work,

18 including scaffolding centering, form work,

needle vibrated consolidation, curing comp.

(excluding cost of reinforcement and neat finishing)

with centering and shuttering/deshuttering etc.

comp. for structure for other than water retaining.

Footing (without form work)

Providing and cast in situ C.C. in grade M-20( -

proportions as per mix design or as per table of

IS456 2000 in masses by weigh batching) using

granite, quartzite trap metal of size 6 mm to 20 mm

for RCC Work including scaffolding centering

formwork, needle vibrated consolidation, curing

complete up to 6 meter depth or height (excluding

cost of reinforcement and neat finishing) with

centering and shuttering/ deshuttering etc. complete

for structure other than water retaiing.

A) RCC Footing 5.00 5,520.00 Cu.m.

B) RCC column 5.00 7,363.00 Cu.m.

C) RCC Beam 5.00 6,722.00 Cu.m.

D) RCC Slab 5.00 6,504.00 Cu.m.

E) RCC Wall 5.00 6,779.00 Cu.m.

Providing and cast in situ C.C. in grade M-30 -

proportions of ingredients as per mix design by

weigh batching using granite, quartzite trap metal

of size 12 mm to 20 mm and or 6 mm to 12 mm

including scaffolding centering formwork, needle

vibrated consolidation, curing and hydraulic testing

etc. complete (excluding cost of reinforcement)

with centering and shuttering/deshuttering etc.

camp. up to 6 meter height /depth Av. G.L.for all

water retaining structures

a) R.C.C. Raft and footings with shuttering 15.00 8,213.00 Cu.m.

b) R.C.C. walls 10.00 8,083.00 Cu.m.

c) R.C.C. Staircase & Beam 5.00 8,213.00 Cu.m.

d) Columns 5.00 9,317.00 Cu.m.

Supply cutting, Bending, Binding and placing in 2.00 77,504.00 MT

position steel as per plan and design and as per ISS

2502 including cost of steel and binding wire for

21 reservoirs/ structures only including lift up to

meter height or depth below G.L. for all diameters.

Deformed(TMT)bars confirming to relevant IS Fe-

500 grade for all diameters.

Brick work using common burnt clay building 40.00 4,011.66 Cu.m.

bricks having crushing strength not less than 35kg /

Sq. C. M. in ramp, steps and Foundation & Plinth

22 in cement morter1:5 (1 cement : 5 coarse sand)

including racking out joints, curing, scaffolding

required if any etc. complete, as directed. (B)

Brick masonry in cement mortar (1:5) using 35.00 4,283.91 Cu.m.

common burnt clay building bricks having crushing

23 strength not less than 35kg/cm2 including

scaffolding,curing, etc. complete for walls,

parapets, etc. at all levels.

20 mm thick sand faced cement plaster on walls 790.00 297.68 Sq.mt

upto height 10 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement

: 3-sand) and 8 mm thick finishing coat of C.M. 1:1

(1-cement : 1 sand) etc. complete.

Providing and applying 15 mm thick cement plaster 840.00 222.56 Sq.mt

in single coat on brick work with floating coat of

net cement slurry for interior plastering of

pumphouse and outside plastering of sump upto

finished even and smooth in Cement motar 1 : 3 (1

cement : 3 sand) including racking out joint curing,

scaffolding required if any, with necessary cement

finishing etc. complete as directed.

Interior plain faced 15 mm thick cement plaster 525.00 247.13 Sq.mt

(1:3) with floating coat of neat cement slurry on

Underneath Ceiling of top of UG tank where

26 specified on drawings and or engineer in charge at

all levels including scaffolding, curing, etc.

complete. This rate shall include moulding where

Writing letter or figures on any surface with black 15.00 3.15 Per

japan paint (stops, comas, hyphens and the like not Letter

27 to be measured and paid for separately) (i) Block Per

(Letters/Figures) (Per 10 Letter pet CM.HT) Cm/Ht

Providing throating or plaster strip / ghishi and 105.00 41.25 Rmt

28 moulding as instructed by Engineer in charge.

Providing in line level plumb, fabricating and fixing 265.00 449.00 Rmt.

three row horizontal barbed wire fencing and

punched tape concertina coil of 9 turns per meter of

610 mm diameter fixied with clips on top of the

angle iron posts. The punched tape concertina coil

having sharp barbs at every 25 mm spacing shall be

0.5 mm thick and 19 mm width and weighting

29 Kg./100 mtr. (Average) as per manufacture's

specification. The rate shall also include providing

and fixed 1.20 mt. total long MS angle 40 x 40 x

mm @ 3.00 mt. c/c spacing embedded in RCC

column, angle posts shall be painted with one coats

of red oxide and two coats of enamel paint of

approved quality at top of compound wall.

Fabricating and fixing in position MS structural 2,100.00 82.50 Kg.

section such as flat, pipes, plates, hold fast,

anchoring bolts / bars of required size including

fixing, welding and two coats of approved anti

30 corrosive paint over prime coat of red-oxide

including RCC gate column as per drawing etc.

complete as directed by Engineer-in-charge.

2.2 m height and 6 m wide main , wicket gate and

Toilet Block Door.

Providing and laying broken Chine Mosaic flooring 405.00 739.89 Sq.mt

for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over Cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

crème out upto surface using white cement

including rounding of junctions and extending them

upto 15 cm. along the wall, clearing with water and

oxalic acid etc. as directed.

Distempering (two coats) with oil bound distemper 3,675.00 76.08 Sq.mt

of approved brand and manufacture and of required

shade on undecorated wall surface to give an even

shade, over and including a priming coat with

32 distemper primer of approved brand and

manufacturer after thoroughly brushing the surface

free from mortar dropping and other foreign matter

also including preparing the surface even and sand

papered smooth.

Finishing wall with weather proof exterior emulsion 4,200.00 113.40 Sq.mt

paint on wall surface (two coats) to give an required

33 shape even shade after thoroughly brushing the

surface to remove all dirt and remains of loose

powdered materials. Etc. Complete

Kota stone in Jams and Sills of the window and 60.00 1,107.00 Smt

34 ventilation and Door with one molding as directed

by Engineer-in-charge.

Providing and fixing window having extruded 40.00 1,568.27 Smt

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17 mm (of Jindal

Section no : 2459 @ wt. of 0.738 Kg/mt), horizontal

Three track member size 92mm x 31.75 mm x

mm (of Jindal Section no. 8688, @ Wt.

Kg/mt), vertical member of size 92mm x 31.75mm

x 1.50 mm (of Jindal Section no. 8933, @ Wt.

35 Kg/mt.) with sliding shutters of horizontal member

size 40mm x 18mm x .29 mm (of Jindal section no.

8947 @ wt. 0.456 Kg/mt.) vertical member of size

40mm x 18mm x 1.29mm (of Jindal Section no.

8949 @ wt. of 0.456 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as

per details etc. PH Window and LT room Windows

Providing and fixing standared extruded of 34.56 1,163.92 Smt

alluminimum section of size 63mm x 38.10mm x

1.2mm (Jindal Section : 2434, @ Wt. 0.643 Kg/mt.)

with colour powder coated alluminium frame for

ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

Providing & fixing in position aluminium grill with 34.56 1,750.00 Smt

15 micron natural matt brush finish anodised as per

over all size shown on the drawings and aluminium

sections of approved make conforming to IS:733

and IS : 1285, made out of DG - 104 design ( Jindal

or equivivelent ) fixed with required size F channel,

rawl plugs and screws or with fixing clips, or with

expansion hold esters including necessary filling up

37 of gaps at junctions, at top, bottom and sides with

required PVC/neoprene felt etc. and aluminium

snap beading for glazing / panelling, C.

P.brass/stainless steel screws, including standard

anodised aluminium fittings and fixtures of

approved make and of adequate size and in

adequate numbers, including cost and fixing of

fixtures etc. complete as per detailed drawings with

all lead and lifts.

Providing precast cement concrete jali or louvers 40 25.00 640.20 Smt

mm thick 1:2:4 mix (1 cement : 2 coarse sand :

graded stone aggregate 6 mm nominal size)

reinforced with 1.6 mm dia. Mild steel wire

including roughening, cleaning, fixing and

finishing in CM 1:3 and curing, painting complete

Supplying, fixing Push and Pull, 20 gauge rolling 30.00 4,277.00 Smt

shutter of approved make for the sizes indicated on

drawings including hood cover, channel sliding

assembly, helical coil springs, brackets,

interlocking latches, locking arrangements,

painting with 2 coats of enamel paint over one coat

of approved primer paint etc. complete. Shutters

having width below 3.5M (gear Operated)

Providing and laying cement concrete flooring 255.00 348.08 Smt

1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) including water

proofing compound finishing with a floating of neat

cement slurry etc. complete laid in one layer

finished including necessary curing at bottom of

Average 50 mm thick

Providing and laying polished Kota stone slab 210.00 1,085.48 Smt

flooring over 20 mm (average) thick base of cement

mortar 1:6 (1 cement : 6 coarse sand) laid over and

jointed with grey cement slurry including rubbing

and polishing etc. complete at LT & HT, office

room & Chlorine room. 30 mm thick

Providing and laying polished Kota stone slab 25 105.00 1,176.03 Smt

mm thick in riser of steps, skirting Dedo & pillars

42 laid on 10 mm thick cement mortar 1:3 (1 cement :

3 coarse sand) and jointed with grey cement slurry

including rubbing and polishing etc. complete

Providing and fixing 40mm dia. GI pipe medium 55.00 1,397.00 Rmt

weight quality as openable type with angle iron

support at 1.5 m c/c using 75 x 75 x 10 mm angles,

1 m long with three rows of pipes as railing

including necessary painting with two coats of

approved quality oil paint over one coat of approved

primer including necessary welding, bolting

required, if any.

Painting two coats including priming coat on new 525.00 121.28 Smt

steel & other metal surfaces with enamel paint,

44 brushing, interior to give an even shade including

cleaning the surface of all dirt, dust, other foreign

Providing, Fabricating & fixing WDS name board 1.00 15,640.00 No.

of Size 3.00mX0.60 made from ISA 50X50X5 mm

M.S angle with 3 Nos supports at back side vertical

member of angle size 1.1m ht incl 0.3 m hold fast

inserted in compound wall with necessary

45 dismantling and fixing with cement concrete. The

rate shall also incl 16 g M.S sheet of size 3.00X0.60

mt incl ACP Sheet with Printing letter with AMC

logo as directed by EIC. rate shall incl painting

board with 2 coat of enamal paint over one coat of

anti-corrosive primer.

Providing, Fabricating & fixing caution board of 1.00 7,900.00 No.

size 1.50m x 0.60m made from ISA 40 x 40 x 5 mm

MS angle with 2 nos. supports at back side vertical

member of of angle size 1.10m height (inclu. 0.30m

hold fast inserted in compound wall with necessary

46 dis-mantling and fixing with cement concrete. The

rate shall also include 14g MS sheet of size 1.50mt

x 0.60mt incl ACP Sheet with Printing letter with

logo as directed by EIC. rate shall incl painting

board with 2 coat of enamal paint over one coat of

anti-corrosive primer.

Providing and fixing Radium sign board of size 1.00 7,400.00 Nos.

3.00mt x 0.60 mt made from ACP sheet with

47 writing coloured reflected letter of WDS name

board with necessary clamp for hanging board at

pump house etc. comp as directed by EIC

Grouting with 1:3 cement, sand mortar for anchor 10.00 4,536.00 Cmt

bolt pockets, machine bases, pipe sleeves, pockets

holes, etc. including roughening and cleaning of

concrete surfaces, curing, etc. complete.

Fixing of Rebar on concrete structure for -

connection with new structure using Hilti/Fischer or

equivalent technology including all labour, tools &

49 tackels temporary arrangement, safety meaasures

10 mm dia. Bar 50.00 45.00 Nos.

12 mm dia. Bar 100.00 69.00 Nos.

16 mm dia. Bar 50.00 238.00 Nos.

20 mm dia. Bar 80.00 458.00 Nos.

Providing and laying Trimix with dewatering 255.00 48.21 Smt

machine and floater machine on constructed RCC

work including cost of machine and labour etc.

compact directed.

TOTAL ESTIMATE OF MISCELLANEOUS CIVIL WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Miscellaneous Civil works for Existing Water Distribution Station at

Work Gujkomasol at South Zone of AMC.

ITEM QTY UNIT RATE AMOUNT

1 OFFICE FURNITURE 1 Nos. 3,500.00

Office Table of size 1200 mm length X 600 mm

2 Steel Office Chair 3 Nos. 1,500.00

3 Ladder: Ladder shall be made out of light 1 Nos. 6,000.00

aluminium allow of good strength. They shall be

of step ladder, foldable, self supportig type with

sperader of metalic angles or high strength.

Ladder: As per S.R. No.2.(i) 3 Meter long

4 Ladder: As per S.R. No.2.(ii) 6 Meter long 1 Nos. 10,000.00

GRAND TOTAL OF TOOLS, TEST EQUIPMENTS & SPARE PARTS

GRAND TOTAL OF TOOLS, TEST EQUIPMENTS & SPARE PARTS

Note: Above items shall be handed over to AMC before the commencement of O&M period for

Water Distribution Station at Gujkomasol at South Zone of AMC.

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Miscellaneous Civil works for Existing Water Distribution Station at

Work Gujkomasol at South Zone of AMC.

ITEM QTY UNIT RATE AMOUNT

1 Horizontal Split Case Centrifugal Pump Set (Pump + Motor) 5 Set

2 Manually Operated Sluice Valve - Size : 600 mm NB 5 Nos.

3 Ele. Actuator Operated Sluice Valve - Size : 500 mm NB 5 Nos.

4 DPCV Valve - Size : 500 mm NB 5 Nos.

5 Expansion Bellow - Size : 500 mm NB & 600 mm NB 10 Nos.

6 Pipes & Fittings 1 Lot

7 EOT crane 1 Set

8 Distribution Transformer 2 Nos.

9 HT VCB Panel 1 Nos.

10 LT PMCC Panel 1 Nos.

11 APFC Panel 2 Set

12 HT & LT Cables as per site availibility 1 Lot

13 Earthing System 1 Lot

14 Indoor, outdoor Wiring etc. 1 Lot

TOTAL OF BUYBACK AMOUNT (In Rs.) -

Notes The rate of the items shall be deducted from the capital cost of the tender and contractor shall

: carryout all items.

AMC will take final decision whether to sell item or not. If AMC does not sell particular item,

the bidder will not get rebate amount of that item.