Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹20.4 LAccepted-AOC 1040 12 3 BABA KARAM CHAND STREET NEAR MAHANTA DI KOTHI DORAHA 141421 DISTT LUDHIANA PB | DORAHA | LUDHIANA | PUNJAB | 141421 | l1 | Accepted-AOC Due to lowest accepted | |
| 2 | L2₹20.5 L+₹7,845.95 (0.38%)Rejected-Finance 45 PIR BABA TARUSHAW ROAD HALWARA AD LUDHIANA 141106 | HALWARA | LUDHIANA | PUNJAB | 141106 | L2 | Rejected-Finance Other than lowest |
Tender Value
₹20.5 L
EMD Value
₹41,007
Closing Date
20 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana-141001
PROVN OF TEMP ACCN TRG-CUM-CONFERENCE HALL/CONTROL ROOM AT CETC DORAHA UNDER GE LUDHIANA
2022_MES_571136_1
GE/LDH-62/2022-23
Open Tender
Civil Works
Item Rate
180 days
Doraha under GE Ludhiana
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹41,007
Yes
14 Feb 2023
24 Dec 2022
21 Jan 2023
24 Dec 2022
20 Jan 2023
7 Jan 2023
24 Dec 2022 - 6 Jan 2023
Amount
Sch 'A' sec-I
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil
Excavation in trencehes n exc 1.5 Mtr wide & N exc 1.5 Mtr deep and getting out in soft/loose soil
M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.
M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6Mtr mean radius, built in cement mortar 1:6
M&L for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick walls built in cement mortar 1:4
M&L for RCC (1:1 1/2:3) nominal mix using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete.
M&L for RCC (1:1 1/2:3) nominal mix using 20mm graded stone aggregate as in column peir post and struts.
M&L for RCC (1:1 1/2:3) using 20mm graded stone aggregate as in slabs supported on walls
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, benching rounded or chamfered on edges complete.
M&L for formwork for rough finish surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
M&L for formwork for rough finish surface to sides of pillars, posts, struts, piers, columns, and stanchions.
S&F for Mild steel TMT bars 10m dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
All as per item No 12 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed
M&L for RCC (1:1 1/2:3) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete.
M&L for formwork Rough finish surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
M&L for rendering 12mm thick on fair faces of brick work or concrete surfaces with CM (1:6) finished surface even and smooth.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in two layers 1st 10mm & 2nd 5mm using water proofing compound in both layer with CM (1:4) External finish surface even and smooth without using extra cement.
M&L for moorum/red bajri filling in floors or pavings,laid in layers n exc. 15 cm thick,spread,leveled and rammed including watering.
M&L for 75mm thick cement concrete 1:4:8 Type D2 (40mm graded aggregate) as in floor finished complete.
M&L for preparation of new surface of wall with Birla putty filling on plastering surface and applying two coat of distemper oil emulsion white or printed on walls.
M&L for preparing surfaces plastered new surfaces on walls and applying two coats of cement based paint all as specified.
S&F for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.(FE-410-W, gde-E-250) of quality-A.
S&F for 16 to 20mm dia of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long.
S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240
S&F for plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment.
S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
M&L for preparation of steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
M&L for 75MM thick PCC 1:3:6 Type C2 using 40mm graded stone aggregate as in plinth protection complete.
M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L for glazed ceramic coloured tiles (350X250/450X350mm) x6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:4 complete.all as specified.
M&L for machine cut kota stone slab flooring 20-25 mm thick over 20mm thick cement screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
M&L for machine cut kota slab 16mm to 18mm thick in risers of step skirting dado over 10mm rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
S&F for viterous china ware wash down water closet pan (Pedestal Pattern) white and plastic seat and cover with MS CP hinges (excluding fixing bolts, flushing cistern and floor pipe) complete.all as specified.
M&L for 4 mm thick E -classic board tiles as in ceiling tiles 600x600mm x4mm thick fixed with 3.15mm dia G I suspenders @600x600 c/c both ways including necessary galvanised iron powder coated frame work at size 28x24x0.9mm thick main and supplimentray joint and 24x24x0.9mm thick angle at corners. (Modal E-Board classic of Everast )
S&F for vitreous china wash basin with vitreous China Pedastal, white, flat back, size 550 x 400mm, fixed with brackets incl 32mm bore CP waste coupling.
M&L for vitreous china urinal,bowl type size of 465x335x265mm (back or corner wall type) complete incl providing and fixing plugs beding urinal against wall in CM 1:2 security urinal plug with and incl 60mm long brass screws pointing around urinal back in cement fixing automatically flushing cistern with bracket, flush pipes grating and union for discharge pipe fixed complete.
S&F for 10 ltr capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle incl brackets.
S&F for PVC connections 15mm size with PTMT nuts of lengthh 450mm
S&F for 15mm bore bib taps fancy type chromium plated with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule.
S&F for rotational moulded polythylene water strarge tanks 500 ltr capacity in triple layer (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-I.
S&F for 20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.
S&F for 15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors or concealed to wall all as specified and directed.
S&F for 15mm bore fency type chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F for 20mm bore fency type chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F for 20mm bore brass ball valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed.
S & F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete.
S & F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete.
S & F for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.
S&F for PVC (SWR) bend any radius 110mm bore complete all as specified and directed.
S&F for PVC (SWR) bend any radius 75mm bore complete all as specified and directed.
S&F for pressed steel frames,size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete ,as specified.
M&L for providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats.
S&F for 35mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panelsof 9mm thick BWP commercial; ply or 12mm thick veneered particle boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
M&L for preparation of new surfaces of wood surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.
S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing all as specified.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame all as specified.
S&F for steel ventilator with top hung shutter including hinges, steel peg stay complete.
S&F for 3mm thick figured glass, pin headed type and glazing with oil putty in squares n exc 0.5 Sqm in each pane
S&F for Glavanised Mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvnaised wire staples.
S&F for aluminium alloy anodised and fixed butt hinge 100 mm long.
S&F for extruded aluminium alloy handles, fabricated type, anodised 125mm long.
S&F for aluminium anodised, barrel tower bolts of extruded section 150mm long.
S&F for aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections ans fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, 200mm long.
S & F for steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm single rebated comprises gauged skeleton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: wire mesh and painting shall be measured & paid separately under appropriate item.
All as per item No 68 here in before but window with glazed shutters . Note Glass and paint shall be measured and paid separately under appropriate item.
S&F for 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm Each pane .
S&F for mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface.
M&L for PCC 1:2:4 Type B2 (40mm graded aggregate) as in in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed to match over 15 mm thick screed bed in cement mortar (1:6) over 25 mm thick PCC (1:2:4) type B-1 over sub base complete all as specified.
Supply only integral water proofing compound.
M & L for point wiring with PVC unsheathed, FRLS stranded copper conductor of size 1.5 sqmm (nominal cross sectional area ) single core cable in and including concealed/ surface wiring incl PVC conduit medium grade, ISI marked, 20 mm or higher dia complete with all accessories/fittings and sunkan MS boxes of thickness not less than 1.2 mm covered with 3 mm thick plastic laminated hard glassy surface sheet cover concealed in wall with screws & washers including unsheathed single core PVC insulated cable green in colour 1.5 sqmm stranded copper conductor as earth wire and connecting to earth dolly for one light /fan point controlled by one , one way 5/6 switch. complete all as specified & directed by Engr-in-charge.
All as per item No. 75 here-in-before but one 5 pin 5/6 Amps socket outlet point on independent board controlled by one way switch single pole 5/6Amps complete all as specified & directed by Engr-in-charge.
All as per item 76 but one 5 pin 5/6 Amps socket outlet point on the same board with other switches /socket complete all as specified & directed by Engr-in-charge.
All as per srl item No. 75 here in before but with 2.5 Sqmm copper (nominal area) FRLS cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm with stranded copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.
S&F for switch piano flush type white /ivory finish 5/6 Amps, single pole one way complete all as specified & directed by Engineer In-charge .
All as per item No 79 above 15/16 Amps single pole one way.
S &F for socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type.
All as per item No 81 above but 3 pin 5/6 Amps & 3 pin 15/16 Amps
S&F for ceiling rose size 65mm surface Bakelite AC 220/240 volts 3 terminals PVC/Polycarbonate complete all as specified & directed by Engineer-in-charge.
S&F for 20 Watt LED batten lighting fixture (1200mm) with having input voltage AC 240 V,50 hz,6500K trimline is a robust high performance batten and LED luminaire comprises of extruded channel in thermally conductive material and high translucent ceramic milky white diffuser is used to get glare free and smooth light distribution and connection from ceiling rose to connector complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge.
S&F for LED luminaire 600mm x 600mm,35/36 watt ,220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver,holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete as specified and directed by Engr-in-Charge.
S&F for LED security light fittng 35/36 watt operated on 230 V 50 Hz AC ,made up of pressure die cast housing with toughened glass and high power LEDs with option secodary optic with IP 66 protection including SPD for building security purpose with bracket made of GI pipe light grade 40mm dia 1.2 mtr long bend to shape as required and fixed in position with two nos MS clamp of size 40x6mm complete all as specified and directed by Engr in Charge.
S&F for MCB, single pole 240 Volts 5 to 30 Amps complete all as specified & directed by Engineer-In-charge.
S&F for MCB single pole and neutral 240 Volts 63 Amps complete all as specified & directed by Engineer-In-charge.
S& F for sheet metal enclosure for DB , eight way , SPN, with 200 Amps bus bar , 240 Volts suitable for housing MCBs and isolatorand making niche,replastring to match with existing surface etc complete all as specified & directed by Engineer-In-charge.
Supply and fixing ceiling fan 1200 mm sweep, star rated complete with electronic type regulator and accrssories including provision of cord flexible copper conductor 23/0.0076 three core from ceiling rose to connector complete all as specified & directed by Engr-in-charge.
M& L for earthing complete with & including galvanized MS earth plate of size 600 x 600 x 6 mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire soldered and riveted or connected to earth plate by means of nuts, bolts , check nuts & washers, of galvanized iron or steel all as Shown in electrical plate No. 3 of MES SSR Part- I (2009) and connected to panel board, all as specified and testing on completion including provn of earth wire 4 mmm dia duly protected with and including 15 mm dia bore medium grade GI pipe upto 7.5 (maximum) meter from electrode to earth point including provn of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate and GI light grade watering pipe of 20mm dia bore with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC 1:3:6 type C-1 as in earth chamber, 50 mm thick RCC cover using cementconcrete 1:2:4 type B-0 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work and MS frame using MS angle of size 40mm x 40mm x 6mm complete all as specified & directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to the department.
Supply, laying and testing of cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 core 10 Sqmm complete all as specified & directed by Engr-in-charge.
M & L for sand cushioning for under ground cable 23 cm thick (one layer of 8cm thickness before laying the cable and other layer of 15cm thickness after laying the cable) all as specified and directed by Engineer-in-Charge.
M & L for brick protection with old size sub class 'B' bricks laid flat across the route of underground cable all as specified and directed by Engineer-in-Charge.
M&L for Cutting of existing GI pipe line 40mm bore for making branch connection for 25mm bore pipe with and including inserting tee of size 40x40x25 mm medium grade and make good disturbed surafce complete all as specified and directed by Engr-in-Charge
Supply and laying galvanised mild steel tubing medium grade 25 mm bore with all fittings,laid in trenches,in floor/under road on wall complete all as specified and directed by Engr-in-Charge.
S&F for gun metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete for 25 mm dia bore pipe complete all as specified and directed by Engr-in-Charge.
M&L for brick masonry valve pit chamber with inner clear dimension 450 x 450 x 400 mm suitable for 25mm Gate Valves with PCC (1:4:8) 150mm thick type D2 for foundation, Brick masonary 230mm wall in CM (1:4), PCC (1:2:4) 75mm type B1 for coping, rendering in CM (1:4) 15mm thick including provisiion of 3 mm thick MS sheet cover and 25 x 25 x 3mm angle frame embeded in coping with two coats of synthetic enamel paint over a coat of red oxide primer with locking arrangements including necessary earth work complete all as specified and directed by Engr-in-Charge.
CHOUDHARY ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .