Loading
Loading…
Loading…
Tender Value
₹10.0 L
EMD Value
₹19,980
Closing Date
8 Sept 2026, 6:00 pm
AGE(I)KATIHAR
SIRSA ARMY CAMP KATIHAR - 854106
REPAIR TO JOINERY WORK AND OTHER MISC WORK AT MIL STN KATIHAR UNDER AGE (I) KATIHAR
2026_MES_784935_1
C/8084/E8
Open Tender
Civil Works
Item Rate
120 days
AGE(I)KATIHAR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
AGE(I)KATIHAR
₹19,980
Yes
18 Aug 2026
18 Aug 2026
15 Sept 2026
18 Aug 2026
8 Sept 2026
1 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutter (without taking off shutters from the frame) incl dismantling of PCC bed blocks for hold fasts complete all as specified and as directed by Engr-in-charge | 33 | Each | - | - |
| 2 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) .complete all as specified and as directed by Engr-in-charge | 7 | Each | - | - |
| 3 | S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tubes in opening as per specific drawing. complete all as specified and as directed by Engr-in-charge | 40 | RM | - | - |
| 4 | S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour pvc 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,Panelling of plain colour pvc sheet to be fitted in the ms frame complete all as specified and as directed by Engr-in-charge | 15 | Sqm | - | - |
| 5 | S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised complete all as specified and as directed by Engr-in-charge | 24 | Each | - | - |
| 6 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and as directed by Engr-in-charge | 60 | Each | - | - |
| 7 | S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long complete all as specified and as directed by Engr-in-charge | 60 | Each | - | - |
| 8 | S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-charge | 7 | Each | - | - |
| 9 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length cover plate 150mm complete all as specified and as directed by Engr-in-charge | 14 | Sqm | - | - |
| 10 | Supply and fixing galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and as directed by Engr-in-charge | 20 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
tender8084.pdf
Tender Documents • 1.53 MB
BOQ_879546.xls
BOQ • 1.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].