Odisha

Cancelled

Works

Electrical Works

Replacement of Midverg lights from Madhusudan Chowk to Railway Station in Ward No. 26, Rourkela.

Rourkela Municipal Corporation

Rourkela | Sundargarh, Odisha

Amount: ₹16.8 LCloses: 22 Apr 2026Closed

Timeline

Published7 Apr 2026
Closed22 Apr 2026
Cancelled3 Jul 2026

Bids

20 Bids3 Jul 2026

#	Company	Status
1	GLOBAL ENERGY Admitted-Technical MIG 1 183 SATYASA ENCLAVE KHANDAGIR BHUBANESWAR \| ANUGUL \| ODISHA \| 759022	Admitted-Technical By The Tender Committee
2	GOLAP KESHARI CHAINI Rejected-Technical	Rejected-Technical By The Tender Committee
3	Hindusthan Electric Company Rejected-Technical	Rejected-Technical By The Tender Committee
4	JAGANNATH ENTERPRISES Rejected-Technical PLOT NO 90 286 KHATA NO 125 97 PANDUA NEAR BAIDYANATH TEMPLE PO JARAKA DIST JAJPUR 755050 \| JARAKA \| JAJPUR \| ODISHA \| 755050	Rejected-Technical By The Tender Committee
5	JBS ENTERPRISES Rejected-Technical	Rejected-Technical By The Tender Committee

Cancellation Details

Cancellation of Tender

CorrigendumCorrigendumReason: Due to admistrative reasons/issuesDocument: cancelled_1.pdf

Published 3 Jul 2026

Tender Value

₹16.8 L

EMD Value

₹16,820

Closing Date

22 Apr 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

Municipal Commissioner, RMC

Address

Rourkela Municipal Corporation, Rourkela

Work Description

Electrical

Tender Information

Tender ID

2026_RMC_127902_3

Reference Number

MC/RMC/23/2026

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Period of Work

45 days

Location

Rourkela

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical/Finance

RequiredRegistration Certificate, Affidavit, PAN, GST, EMD,, Paper Cost and other documents as per DTCN (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹6,000

EMD Fee Amount

₹16,820

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

3 Jul 2026

Published

7 Apr 2026

Bid Opening

23 Apr 2026

Download Starts

7 Apr 2026

Download Ends

22 Apr 2026

Submission Starts

7 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply, Installation, testing & commissioning of 150W Spun Aluminium housing with pressure die cast heat sink, Ring Spun Aluminium Grey finish powder coated, Cover, Clear Polycarbonate. Mains Terminal 3-way 10A, suitable for terminating up to max. 2.5Sq.mm incoming cable, cable entry through mounting pipe, SS Hardware, IP 65 Ingress Protection, Potted driver: BIS approved (Electrical Safety as per IS 15885), High Surge Protections Potted Driver with 4KV internal + 10KV SPD, Electrical Protection, High Voltage, Short Circuit, Rated Voltage (V) 240 Frequency (Hz) 50 Operating Voltage Range (V) 120-270, (A) @ 240V 0.657 Wattage (W) @240V 150 Reverse Polarity & Open Voltage Protection, THD<10%, PF>0.95, Correlated Colour Temperature (CCT) K 3000K, suitable for existing arm.
1.01	Sample to be produced before installation of fittings. LM79 test report shall be submitted from in-house NABL accrediated LAB. Manufacture test certificate of Light fittings shall be submitted after completion of the work satisfactorily. Three Years On-Site Maintenance. (Make: Philips(Non-Ecolink)/ Bajaj/ Havells/ Crompton/ Jaquar/ HPL/ WIPRO)	-	-	-	-
2Dismantle of Decorative Poles by mechanical means. Cleaning both Pole, base, arm using sand paper,colouring the pole with two coats of primer and two coats of grey paint, fixing of 2nos double pole MCB of inside I/C and connector, Covering the I/C with G.I Sheet with help of suitable GI nut & bolt and refixing the pole with help of GI nut & bolt as per direction of EIC.
3Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface.
3.01	2 x 2.5 sq mm + 1 x 1.5 sqmm	-	Mtr	-	-
4Supply and laying of size 04 core x 10sq.mm PVC insulated PVC sheathed armoured underground aluminium cable for power supply from Panel Board to street light poles including cost of materials, labour, T&P and transportation etc. complete as per direction of the E.I.C. (Make: Polycab/Havells/Glostar/KEI) Three Years On-Site Maintenance.
5Supply and laying of size 04 core x 16 sq.mm PVC insulated PVC sheathed armoured underground aluminium cable for power supply from Pole to Panel Board including cost of materials, labour, T&P and transportation etc. complete as per direction of the E.I.C. (Make: POLY CAB/ Havells/ Glostar/ KEI) Three Years On-Site Maintenance.
6Supply and laying of 50 mm dia HDPE Pipe inside the trench for laying of cable including cost of materials, labour, T&P and transportation as per direction of the Engineer-in-Charge. Three Years On-Site Maintenance.
7Supply and fixing of 3 phase outdoor type panel board made of 16 SWG- C.R sheet of size 3'-0" x 2.'-0" x 1'-5" ( L x B x D) with epoxy grey powder coated. The panel board consisting of the following accessories.
7.01	(i) Neon Indicator - 3 nos.	-	-	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.06 MB

Technical Evaluation

tech_eval.pdf

PDF

Bid Opening Summary

finance_587244.pdf

PDF

boq_comp_chart.xlsx

xlsx

Cancellation Documents

cancelled_1.pdf

pdf • 0.68 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.96 MB

Work Item Documents

BOQ_587244.xls

BOQ • 0.25 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

GLOBAL ENERGY

Admitted-Technical

MIG 1 183 SATYASA ENCLAVE KHANDAGIR BHUBANESWAR | ANUGUL | ODISHA | 759022

GOLAP KESHARI CHAINI

Rejected-Technical

Hindusthan Electric Company

Rejected-Technical

JAGANNATH ENTERPRISES

Rejected-Technical

PLOT NO 90 286 KHATA NO 125 97 PANDUA NEAR BAIDYANATH TEMPLE PO JARAKA DIST JAJPUR 755050 | JARAKA | JAJPUR | ODISHA | 755050

JBS ENTERPRISES

Rejected-Technical

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply, Installation, testing & commissioning of 150W Spun Aluminium housing with pressure die cast heat sink, Ring Spun Aluminium Grey finish powder coated, Cover, Clear Polycarbonate. Mains Terminal 3-way 10A, suitable for terminating up to max. 2.5Sq.mm incoming cable, cable entry through mounting pipe, SS Hardware, IP 65 Ingress Protection, Potted driver: BIS approved (Electrical Safety as per IS 15885), High Surge Protections Potted Driver with 4KV internal + 10KV SPD, Electrical Protection, High Voltage, Short Circuit, Rated Voltage (V) 240 Frequency (Hz) 50 Operating Voltage Range (V) 120-270, (A) @ 240V 0.657 Wattage (W) @240V 150 Reverse Polarity & Open Voltage Protection, THD<10%, PF>0.95, Correlated Colour Temperature (CCT) K 3000K, suitable for existing arm.
1.01	Sample to be produced before installation of fittings. LM79 test report shall be submitted from in-house NABL accrediated LAB. Manufacture test certificate of Light fittings shall be submitted after completion of the work satisfactorily. Three Years On-Site Maintenance. (Make: Philips(Non-Ecolink)/ Bajaj/ Havells/ Crompton/ Jaquar/ HPL/ WIPRO)	-	-	-	-
2Dismantle of Decorative Poles by mechanical means. Cleaning both Pole, base, arm using sand paper,colouring the pole with two coats of primer and two coats of grey paint, fixing of 2nos double pole MCB of inside I/C and connector, Covering the I/C with G.I Sheet with help of suitable GI nut & bolt and refixing the pole with help of GI nut & bolt as per direction of EIC.
3Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface.
3.01	2 x 2.5 sq mm + 1 x 1.5 sqmm	-	Mtr	-	-
4Supply and laying of size 04 core x 10sq.mm PVC insulated PVC sheathed armoured underground aluminium cable for power supply from Panel Board to street light poles including cost of materials, labour, T&P and transportation etc. complete as per direction of the E.I.C. (Make: Polycab/Havells/Glostar/KEI) Three Years On-Site Maintenance.
5Supply and laying of size 04 core x 16 sq.mm PVC insulated PVC sheathed armoured underground aluminium cable for power supply from Pole to Panel Board including cost of materials, labour, T&P and transportation etc. complete as per direction of the E.I.C. (Make: POLY CAB/ Havells/ Glostar/ KEI) Three Years On-Site Maintenance.
6Supply and laying of 50 mm dia HDPE Pipe inside the trench for laying of cable including cost of materials, labour, T&P and transportation as per direction of the Engineer-in-Charge. Three Years On-Site Maintenance.
7Supply and fixing of 3 phase outdoor type panel board made of 16 SWG- C.R sheet of size 3'-0" x 2.'-0" x 1'-5" ( L x B x D) with epoxy grey powder coated. The panel board consisting of the following accessories.
7.01	(i) Neon Indicator - 3 nos.	-	-	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supply, Installation, testing & commissioning of 150W Spun Aluminium housing with pressure die cast heat sink, Ring Spun Aluminium Grey finish powder coated, Cover, Clear Polycarbonate. Mains Terminal 3-way 10A, suitable for terminating up to max. 2.5Sq.mm incoming cable, cable entry through mounting pipe, SS Hardware, IP 65 Ingress Protection, Potted driver: BIS approved (Electrical Safety as per IS 15885), High Surge Protections Potted Driver with 4KV internal + 10KV SPD, Electrical Protection, High Voltage, Short Circuit, Rated Voltage (V) 240 Frequency (Hz) 50 Operating Voltage Range (V) 120-270, (A) @ 240V 0.657 Wattage (W) @240V 150 Reverse Polarity & Open Voltage Protection, THD<10%, PF>0.95, Correlated Colour Temperature (CCT) K 3000K, suitable for existing arm.

1.01

Sample to be produced before installation of fittings. LM79 test report shall be submitted from in-house NABL accrediated LAB. Manufacture test certificate of Light fittings shall be submitted after completion of the work satisfactorily. Three Years On-Site Maintenance. (Make: Philips(Non-Ecolink)/ Bajaj/ Havells/ Crompton/ Jaquar/ HPL/ WIPRO)

2Dismantle of Decorative Poles by mechanical means. Cleaning both Pole, base, arm using sand paper,colouring the pole with two coats of primer and two coats of grey paint, fixing of 2nos double pole MCB of inside I/C and connector, Covering the I/C with G.I Sheet with help of suitable GI nut & bolt and refixing the pole with help of GI nut & bolt as per direction of EIC.

3Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface.

3.01

2 x 2.5 sq mm + 1 x 1.5 sqmm

Mtr

4Supply and laying of size 04 core x 10sq.mm PVC insulated PVC sheathed armoured underground aluminium cable for power supply from Panel Board to street light poles including cost of materials, labour, T&P and transportation etc. complete as per direction of the E.I.C. (Make: Polycab/Havells/Glostar/KEI) Three Years On-Site Maintenance.

5Supply and laying of size 04 core x 16 sq.mm PVC insulated PVC sheathed armoured underground aluminium cable for power supply from Pole to Panel Board including cost of materials, labour, T&P and transportation etc. complete as per direction of the E.I.C. (Make: POLY CAB/ Havells/ Glostar/ KEI) Three Years On-Site Maintenance.

6Supply and laying of 50 mm dia HDPE Pipe inside the trench for laying of cable including cost of materials, labour, T&P and transportation as per direction of the Engineer-in-Charge. Three Years On-Site Maintenance.

7Supply and fixing of 3 phase outdoor type panel board made of 16 SWG- C.R sheet of size 3'-0" x 2.'-0" x 1'-5" ( L x B x D) with epoxy grey powder coated. The panel board consisting of the following accessories.

7.01

(i) Neon Indicator - 3 nos.