Painting and maintenance of 12 nos of regulator shutters and hoisting arrangements of Odayikkal RCB in Mampad panchayath

Amount

Scaffolding with first quality bamboo, tied with heavy duty coir

od33427/2019_2020/MH : Scaffolding with first quality bamboo ( 1 score =20 number), tied with heavy duty coir for painting of shutters, applying cardium compound on wire ropes, as per the directions of Departmental officers at site.

Greasing, oiling of mechanisms, alignment checking of shutters, supply of SS bolts etc.

od9007/2020_2021/MH : Supply of SS bolts and nuts for replacing the damaged bolts of rubber seal as per the requirement including the cost of conveyance complete.

od38625/2021_2022/MH : Maintenance of operating mechanism of shutters, top up of gear oil, greasing of Plummer blocks and gears, applying cardium compound to wire ropes, replacement of damaged bolts & nuts, alignment correction of shutters ,checking of entire mechanism, including cost of materials ,labour, tools etc. complete as per instructions of department officers at site.

Painting of Shutters, Hoisting bridge and components

od6653/2020_2021/MH : Overcoat painting the regulator gates and embedded parts with two coats of epoxy coal tar black paint conforming to IS: 14948 with a minimum film thicknessof 150+/- 5 microns, after cleaning the surface using high pressure water jet including cost of materials, labour charges, cost of testing all painting materials, incidental charges, hire of T&P etc. complete as per the direction of Departmental officers at site.

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Fabrication ,painting,supply and erection of MS covers for rope drum and gearbox. ,

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od38642/2021_2022/MH : Fabrication, supply and erection of cover for rope drum unit in structural steel as per the direction of deptl. Officer at site including cost of labour, machinery, incidental and handling charges for fixing cover etc. complete but excluding material already supplied.

od38639/2021_2022/MH : Cost of painting with two coats of Aluminium paint over one coat of red oxide primer/zinc chromate primer as per IS 1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental v\charges, hire charges T&P etc. complete as per direction of departmental officers at site.

Replacing Rubber seals

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

od38725/2021_2022/MH : Chipping , cutting and removing the bolt&nuts, dismantling, taking out and stacking the old rubber seals from the gates without damaging the gate components including cost of all labour, tools and accessories conveyance charges etc. complete.

Ashique Fabricators

ASHIFUL HAK.C

P.Damodaran, G.R.Industries

Bidder Name

Ashique Fabricators

MOHAMMED MUSTHAFA V

P.Damodaran, G.R.Industries

ASHIFUL HAK.C