CA NO GE SOUTH AMB 24 2021 2022 CERTAIN MISC REPAIR TO DRAINS BOUNDAY WALLS GATES AND FENCING IN SECTOR IN SECTOR A ACCN OF AGE B AND R I UNDER GE SOUTH AMBALA CANTT

Amount

Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles complete all as specified and directed.

Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 (Except Bricks) complete all as specified and directed.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 (Except Bricks) complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles (300x 450x 7mm thick) in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 including dismantling of floor or wall tiling including cement mortar bedding and removing the rubbish outside the defence land complete all as specified and as directed.

Supply and fixing for heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed, including dismantling of floor or wall tiling including cement mortar bedding and removing the rubbish outside the defence land complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. and applying neat cement slurry @ 3.00 kg /sq.m, complete all as specified and as directed.

Material and labour for 50mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished even and smooth with out using extra cement complete all as specified and as directed.

Material and labour for providing pre-cast cement concrete louvers and jallies, 50mm thick, 1:2:4, type B-0 (using 12.5mm graded mechanically crushed aggregates) including all mouldings but excluding frame, set in cement mortar (1:4), complete all as specified and as directed.

Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 , finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for 10mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 , finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for rough cast plaster over rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and while it is in plastic state the rough cast mixture consisting of crushed graded stone of fine aggregate (which is generally of size between 6mm to 12mm depending on the texture required ) mixed with coarse sand and cement in the ratio 1:1:1 shall be applied and finished even . the mix of the cement and sand shall be made slighlty wetter than normal for rendering to ensure that larger aggregates are throughly covered except on RCC complete all as specified and as directed.

Material and Labour for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed.

Material and Labour for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls complete all as specified and directed.

Demolition of cement concrete in ground floor and paving’s not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified.

Surface excavation not exceeding 30 centimetre deep and averaging 15 centimetre deep and getting out in soft loose soil complete all as specified and as directed.

Material and Labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor, complete all as specified and as directed.

Supply and fixing PCC coloured , rubber moulded , interlocking designer paver blocks in any shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade in path, hard standing, etc. laid over and including 50 mm thick screed or bedding layer of sand, complete all as specified and as directed.

Material and Labour for PCC in 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) 50 mm thick as in plinth protection, path, laid in alternate bays etc.finished even and smooth without using extra cement and joints filled with bitumen and sand mixture applied hot complete all as specified and as directed.

Material and Labour for providing factory made Precast Cement Concrete kerb stone, 1:2:4 type B1 (using 20mm graded aggregate) with plain fair faces, including chamfers, weatherings, throating etc. and set in CM 1:4 complete all as specified and as directed. NOTE : - (i) The minimum size of Kerb stone shall be 300mmx300mmx100mm and shall be embedded in the ground average 10cm deep. (ii) The quoted rates includes embedding kerb stone and temping ground around kerb stone and removal of surplus soil, etc.

Dismantling posts or struts embedded in any surfaces (natural, concrete, masonary etc.) and of any description, any section, taking out embedded portion & PCC bed and making good to disturbed ground surface , complete all as specified and directed .

Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation, filling and mass concrete, complete all as specified and directed.

Material and labour for steel screw bolts, machine made, dia of neck 11 to 15mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square exceeding 5 cm and not exceeding 10cm long, complete all as specified and as directed.

Material and Labour for mild steel round bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping columns, hooking ends and binding with mild steel (annealed) wire not less than 0.9mm dia conforming to Fe-290.Gde-E-165, complete all as specified and directed., complete all as specified and as directed.

Supply and fixing mild steel, rolled sections(channel, angle or tee sections) fixed independently cut to ordinary length as in post or struts in fencing,ladder etc. including cutting tops to shape as required , drilling holes, notching for wire etc. including flat iron fillets with nuts and bolts for securing chain link fencing including all necessary drilling, bolting or riveting etc conforming to Fe-410(Gde 250), complete all as specified and as directed.

Supply & fixing chain link fencing of 4mm dia mild steel galvanized wire and mesh size 100x100mm, including dismantling of chain link fencing of any description complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and as directed.

Supply and fixing for galvanized 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with & provision of galvanized mild steel wire, staples or steel pins etc (each line of wire to be measured), including dismantling of deterioted barbed wire fencing complete all as specified and as directed.

Supply and fixing mild steel framed work such as grills, gratings,etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walk ways railing, frame work of water tanks and similar work conforming to Fe-290-Gde-E-165, including dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified and as directed.

Material and Labour for plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates) as in fixing of hold fast, copings, bed plates and the like, finished the surface fair and even, including necessary form work complete all as specified and as directed.

Shiv Construction Co.

Gupta Enterprises

PARVEEN KUMAR

Jai Bala Ji

m/s parmod kamar