Provn of new Bathroom in bldg No HT11 at 100 Fd Regt, Mil StnDharamshala

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as directed.

Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out in soft/ loose soil and removing to a distance n exc 50 mtr.

Excavation in trenches for fdn not exc 10 Sqm on plan and not exc.1.5m deep in soft/loose soil complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point.

Add for each additional 50 m or part thereof beyond 50m and upto a total distance of 250m.

M & L hardcore of broken stone or boulders of gauge n.exc.63mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed.

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M&L for MS framed work of angle, tee, F.I, conforming to Fe-290 (Gde E-165), as in roof trusses including distance pieces, cleats etc. welding or riveted complete all as specified and directed.

S&F mild steel rolled section conforming to Fe-290 (Gde E-165), as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats and other connecting plates etc. complete all as specified and directed.

S & F of flat iron bands, straps, supports, clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 Grade E-165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed.

S & F for pre-painted galvalume aluminum zinc coating GI based profile as approved by AGE(I) steel sheet 0.50mm thick (overall) of any colour as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions complete all as specified and directed.

S & F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (overall) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Eaves, fixed with self tapping screws as per manufacturers instructions completed all as specified and directed.

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6.

M&L brick work with sub class'B' bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4.

M & L Damp proof course 40 mm th. In PCC 1:2:4 type B-0 to horizontal or vertical surface.

Applying evenly a coat of blown type bitumen @1.5 Kg / Sqm and blinding with clean dry sand @ 0.05 Cum /Sqm.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.

M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified.

Spreading,levelling,watering and well ramming the earth filling under floor not exc. 25cm thick in layers.

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in sub base

M&L 40mm th PCC 1:2:4 type B-1 using 20mm graded aggregate as in flooring, finished surfaces of cement concrete even and rough to receive the topping layer. Complete all as specified.

M & L 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified.

M&L for PCC 1:2:4 type B 1, using 20 mm graded stone aggregate as surface channels and drains incl fair finishing.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

M&L glazed ceremic tiles in vertical surfaces 350x250x7 mm/400x300x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed.

S&F anodised aluminium snap grid frame work of 605x605mm size for false ceiling all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M & L 6mm thick non asbestos fibre cement building board fixed/inserted to timber/GI/Aluminium frame work with screws, as in ceiling.

S&F powder coated aluminum frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F powder coated, any colour, aluminum door shutters/'C' channel (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges,roller set, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F powder coated, any colour, anodised aluminum window and ventilator shutters, (minimum thickness of powder coating 50 micron), side hung/top hung type without sash bars, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) complete all as specified and directed.

M & L 12 mm thick pre-laminated particle board exterior grade pre-laminated both side with decorative choice laminated and other side balancing white lamination fixed with door frame shutters, complete as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

M & L sheet glass ordinary quality 4mm thick obscured or frosted, on one side and glazing with oil putty in squares exc. 0.5 sqm each pane complete all as specified.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves etc.all as specified and directed.

M&L 18-20 mm thick granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.

Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.

M & L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately.)

Supply only integral water proofing compound

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even complete all as specified.

M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M&L GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studing, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer in charge.

M&L for concrete bed to drain pipes laid in trenches including packing under and haunching against the side of pipes, after they are laid and tested in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), complte all as specified and directed complete.

S&F salt glazed stone ware pipe of 150mm bore grade 'A' laid in trenches and jointed in cement mortar, complte all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radiuS built in CM 1:4 complte all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on brick masonry surface finished even and fair without using, extra cement including mixing of water proofing compound as per manufacture's instructions (water proofing compound shall be measured and paid separately), complete all as specified and directed.

Precast reinforced cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in manhole cover slab, complete all as specified and directed. Note : (Reinforcement shall be measured and paid separately).

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe.

S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long complete all as specified & directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified.

S&F sheet water tubing 15 mm bore medium grade gavanised with all fittings (ISI MARK) fixed complete to wall, celling or laid in floors complete all as specified.

All as per Item no 1 here in before but 20 mm bore

Cutting existing steel tubing for addition or alteration to make connection with 20mm bore pipe.

M & L 15 mm dia cast copper alloy Chromium plated two way Bib cock with wall flange concealed type screwed down for iron pipe or for unions complete all as specified and directed. (Product Code & Make :- Cat Part No.- 8712 of Make Prayag or equivalent model of other makes listed in list of makes).

S & F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F stop valve/Angle valve (ISI marked) brass CP (fancy type long shank) screved down, high pressure with crutdh and buttryfly handel scruwed both end of iron pipe or for uniors of 15 mm bore and fix complete all as specified.

S&F brass CP mixer for WHB for mixing hot & cold water screwed down for iron pipe and fixed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm all as specified and as directed.

S&F 20 mm bore dia Stop valved down, high pressure with scruch r butterifly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified,

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I.

S&F ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 15 mm dia all as directed.

S&F 110mm in any length with rubber ring joinets laid in trenches or in floor complete all as specified and directed

S&F 75mm pvc(swr) pipes single shockets in any length with rubbel ring joint laid in trenches or in floor complete all as speified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, fixed with so lvent cement complete all as specified and directed

S&F 110/75mm PVC (SWR) reducer coupler

S&f 75mm PVC (SWR) vent cowl.

M&L 75mm dia PVC (SWR) floor trap,plain with grating including jointing with solvent cement comple all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F Stainless steel soap trey / soap dish , any type fixed to plugs with chromium plated brass screws fixed complete all as specified.

S&F toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms).

S&F vitreous china urinals,flat back of size 465mmX355mmX 265mm, white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.

S&F vitreous china urinal partition white of slabs terminating about 40cm above floor line size 310x700 mm complete all as specified and directed.

S&F 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 45 gms, suitable for urinals complete all as specified and directed.

S&F vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe, waste fittings etc.

M&L 32 mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed to waste pipe complete all as specified and directed.

S&F 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cup and fixed.

S&F in repair single piece Suite white Vitreous china wash down water closet pan 'P trap' (pedestal pattern) with integral Vitreous china flushing vistern including plastic water closet seat and cover,complete all as specified and directed. (Product Code & Make :- Cat Part No C844A ROCIO of Pryag or equivalent model of other makes listed in list of makes).

S&F 110mm bore PVC (SWR) 'P' trap, including fixed with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) WC connector with lip ring

Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet covered with 3 mm thick plastic laminated sheet ( Make Hylum) concealed in wall or on surface as per site requIrement and making good disturbed surfaces of wall for one light point/bell point/fan point/exhaust fan point etc controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 1 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 1 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

Material and labour for socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed.

Material and labour for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type complete.

Material and labour for Switch piano flush type single pole one way 15 Amp complete

Material and labour for Switch piano flush button 5 Amps complete

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing (in replacement) for sub main wiring single core PVC insulated and unsheathed cable two run 6 Sqmm multi -strand copper conductor drawing in PVC casing caping with 1 x 4.0 Sqmm earth wire as in earth and neutral complete all as specified and directed.

Supply & Fix in replacement of existing unsrviceable Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp 240 Volts rated bus bar all as specified. Note: i) Connections of MCB's shall be done with appropriate size of brass/Copper thimble. ii) The disturbed surface shall be match with existing surface.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fix LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and installing of Electric Water storage heater of ABS body type 25 Litre Capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated Mild steel tank with, glass line coating inside he tank alongwith glass line incoloy heating element with anti corrosive magnesium anode, NRV, theremostate, indicators and temperature adjustable knob including steel braided flxible connection for pipe of size 15mm dia bore GI hexagonal adopeters./ Nuts on both sides of inlet (Cold water supply) & outlet (hot water supply) and including provision of wall mouting arrangement and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and as dierected by Engr-in-Charge.

Supply and fixing heavy duty exhaust fan, 300mm sweep, steel body AC single Phase. 230V complete with with, blades, and frame and louvers including provision of cable copper flexible PVC three core 23/0.0076 from ceiling rose to fan, complete all as specified . Note : Quoted rate shall include for making hole in wall for grouting, fixing the fan on outer side of wall with suitable size anchor bolt and making good disturbed surfaces without ant extra cost.

ASHOK KUMAR JAIN (BID ID -3194388)