C/O Mini Sectt. Building at Shahpur Tehsil Shahpur Distt. kangra (HP)

Amount

Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil includinjg shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawings, design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax or any other taxes imposed by the Government.

Cutting in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, (soft and hard) and conglomerated rocks including chiselling and chiselling or wedging out rocks where blasting is prohibited or any other mixed variety of soil including removal of slush etcetra including de-watering, pumping or bailing out water upto any heights/ depths complete filling depressions where required within all leads, lifts of material and other incidentals. The recovery for stones for 86.13 cubic metre in all cases @ Rs.300/-only (Rupees Three hundred only) per Cubic metre shall be effected from the contractor running bills on pro-rate basis as per actual quantity executed including carriage of matrial within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. Any loss of the public property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases, as per specification, approved drawing design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax or any other taxes imposed by the Government.

Filling in Plinth with sand under floors including watering ramming and consolidating and dressing complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm.(Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering strutting and propping etcetra with wooden battens and ballies upto all heights/ depth of propping and centering below supporting floor to ceiling upto all height and removal of the same for insitu- reinforced concrete and plain concrete work in Foundation, footings basis of columns and mass concrete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron frame of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies for heights of propping and centring below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams, beam, hunchings, cantilevers, bressumers and lintels upto all depths, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm.(Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering, strutting and propping etcetra with wooden battens and ballies complete upto all heights/ depth of propping and centering below supporting floor to ceiling upto all height and removal of the same for insitu- reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters)thick, welded with angle iron frame of 30x30x5mm(Thirty into Thirty into Five millimeters) so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies heights of propping and centring below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in column pillar, post and struts, square, rectangular or polygonal in plan, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with slopping or stepped soffits excluding landing, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and breaks in floors and walls under any thickness, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls any thickness partition and the like including attached pilasters, buttresses, plinth and string courses and the like, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick welded with angle iron frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical fines and vertical sun breakers, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 ( One Cement isto four Sand isto eight graded crushed stone aggregate 40 mm (forty milimetre) nominal size mechanically mixed and curing complete excluding the cost of form work. in foundation and plinth, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed stone aggregate 40 mm (forty millimetre) nominal size mechanically mixed and curing complete excluding the cost of centring and shuttering in foundation and plinth including carriage of material with in all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) with cement contents not less than 330 Kgs/m3 (three hundred thirty kilogrammes per Cubicmetre) 20mm (Twenty milimetre) crushed stone aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns and the like and mass concrete in all depths/thickness above plinth to all floor levels, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) with cement contents not less than 320 Kgs/m3 (three hundred twenty kilogrammes per Cubicmetre) 20mm (Twenty milimetre) crushed stone aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in wall any thickness including attached pillasters, buttresses, plinth and string courses etc. from the top of the foundation to all floor levels including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 ( Twenty newton per square millimetre) with cement contents not less than 320 Kgs/m3 (three hundred twenty kilogrammes per Cubicmetre) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their support balconies, lintel beams, girders, breassumers and cantilever all depth/thickness up to plinth to all floor levels, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) with cement contents not less than 320 Kgs/m3 (three hundred twenty kilogrammes per Cubicmetre) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimetre) with cement contents not less than 320 kgs/cum (Three hundred twenty Kilograms per Cubic metre) mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depth/ thickness above plinth level to all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 ( Twenty newton per square milimetre) with cement contents not less than 320 Kgs/m3 (three hundred twenty kilogrammes per Cubicmetre) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing upto floor all level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square milimetre) with cement contents not less than 320 kg (Three hundred twenty Kilogrammes) per cubic metres mechanically mixed and vibrated including curing complete to give an even smooth surface including centering and shuttering etc. but excluding cost of reinforcement as in mouldings as in cornices windows sills etcetra not exceeding 15cm (Fifteen centimetre) in girth above Plinth level to all floorl levels. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square milimetre) with cement contents not less than 320 kgs/cum (Three hundred twenty Kilograms per Cubic metre) mechanically mixed and vibrated including curing complete in reinforcement work for reinforced concrete work in chajjas any thickness above plinth level to all floor level including finishing the exposed surfae with cement mortar 1:3 (One cement isto Three Sand) to give a smooth and even surface including centring/ form work and curing complete but excluding the cost of reinforcement, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm square with cement contents not less then 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls any thickness including attached buttresses, pilasters and their caps and bases and string courses etcetra upto all floor levels, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced cement concrete work including cutting, straighting, bending, binding and placing in position, including cost of binding wire complete for all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:3 (One Cement isto Three Sand) and curing complete. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:5 (One Cement isto Five Sand) and curing complete. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Boulder filling dry hand packed tightly in under floors including watering, ramming, consolidating and dressing complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Second class brick masonry in common burnt clay building bricks in super structure above plinth level to floor any level in cement mortar 1:6 (One Cement is to Six Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Second class half brick masonry using common burnt clay building bricks in super-structure above plinth level to floor all level in cement mortar 1:4 (One cement isto four sand) and curing complete, .as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing wood work in frames of false ceiling, partitions etc. Sawn and put up in position second class deodar wood, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax , GST or any other taxes imposed by the Government.

Providing and fixing 8mm (Eight millimetre) thick teak ply over 50x31mm (Fifty into Thirty one milimetre) soft wood grid frame work of 600mm (Six hundred milimetre) centre to centre with decorative teak wood beading over teak ply of size 25x12mm (Twenty five into Twelve milimetre) having moulding on both side cornice edging on top of panelling to be finished with 51x30mm (Fifty one into Thirty milimetre) teak wood beading as per detail of standard quality and of approved shade and design wall lining including fixing with approved adhesive but jointing nails and screws complete (Base frame work to be measured and paid for separately), as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing decorative type first class teak wood square edge cover fillet (beading) 25x12mm (Twenty five into Twelve milimetre) on cornices/ edging fixed with necessary screws or nails etc. complete as per approved drawing and design, specifications, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing decorative type teak wood square edge cover fillet (beading) 55x30mm (Fifty five into Thirty milimetre) on cornices/ edging fixed with necessary screws or nails etc. complete as per approved drawing and design, specifications, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing decorative type teak wood square edge cover fillet (beading) 25x6mm (Twenty five into Six milimetre) on cornices/ edging fixed with necessary screws or nails etc. complete as per approved drawing and design, specifications, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five) thick water proof commercial board of Centuary ply (ISI marked) in shelves/ box for cup board with butt joints and fixing with nails and screws etc. Complete, as per approved drawing, design and specifications, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetre) thick water proof termite resistant commercial board ISI No.1659 of Green ply/Centuary Ply/Kit ply for Cup Board Box including its shelves and shutters, including nickle plated bright finished piano hinges complete as per specification, approved drawing design, as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 6mm (Six milimetre) thick ply wood Greenply or equivalent lining with butt jointing and nails (Frame work and cover fillets to be measured and paid for separately), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 1.00mm (One point zero zero milimetre) thick coloured or plain lamination sheet (sunmica) on boards/ ply wood sheets with approved adhesive and nails etc. Complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax. GST or any other taxes imposed by the Government.

Providing and fixing anodized aluminium work No.14081 of Jindal/Hindalco for door and window ventilators and partitions wall extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodized transparent or dyed to required shade according to IS:1868 (Medium anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/neroprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium snap beading for glazing/paneling C.P. brass/ stainless steel screws all complete as per architectural drawings and the direction of Engineer-in-Charge for doors, windows and ventilators and glazed partitions frames . The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing anodized aluminium work for door and window ventilators and partitions wall extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodized transparent or dyed to required shade according to IS:1868 (Medium anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angl;e, aluminium snap beading for glazing/paneling C.P. brass/ stainless steel screws. all complete as per architectural drawings and the direction of Engineer-in-Charge for shutters of doors windows and ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings whereever required including the cost of PVC/neoprene gaskets as required and glazing/paneling shall be paid for separately) (filling glazed/panelling shall be paid for separately). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium anodized powder coated pattern to existing grills 8mm (Eight milimetre) thick in window/ventilators with 80mm x 80mm (Eighty milimetre into Eighty milimetre) panels holes with 25x8mm (Twenty five into Eight milimetre) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in aluminium channels base frames (Aluminum channels base frames to be measured and paid for separately). as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door window, ventilator shutters and partition etc. With PVC/neoprean gasket etc. Complete as per the architectural drawings and the directions of Engineer-in-Charge (cost of aluminium snap beading shall be paid in basic item) for glazing with glass panes of 6.00mm (Six point zero zero milimetre) thick of modiguard (weight not less than 13.75 kg./sqm), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etcetra with PVC (Poly Venyle Cholride) neropeans gasket etcetra complete as per the architectural drawing glazing with glass panes of 4mm (Four milimetre) thickness (weight not less than 10.00 kg/sqm (Ten kilogram per squaremetre), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying and fixing 4mm (Four milimetre) thick Frosted glass panes of modiguard with putty and nails complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ply proof glavanized M.S. Wire gauge of I.S. Gauge designation 85 G with wire of dia 0.56mm (Zero decimal five six milimetre) to windows and clearstory windows, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm (Thirty milimetre) thick factory made PVC panelled door shutter consisting of frame made out of M.S. Tubes of 19 (Nineteen) gauge thickness and size of 19mm x 19mm (Nineteen milimetre into Nineteen milimetre) for styles and 15mm x 15mm (Fifteen milimetre into Fifteen milimetre) for top and bottom rails Code No.9.120 of Rajshri, M.S. Frame shall have a coat of steel primers of approved made and manufacture M.S. frame covered with 5mm (Five milimetre) thick heat moulded PVC "C" channel of size 30mm (Thirty milimetre) thickness 70mm (Seventy milimetre) width out of which 50mm (Fifty milimetre) shall be flat and 20mm (Twenty milimetre) shall be tappred in 45 degree angle on either side forming style and 5mm (Five milimetre) thick, 95mm (Ninety five milimetre) wide, PVC sheet out of which 75mm (Seventy five milimetre) shall be flat and 20mm(Twenty milimetre) shall be tappered in 45 degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen milimetre) wide PVC sheet out of which 75mm (Seventy five milimetre) shall be flat and 20mm (Twenty milimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten milimetre) thick, 20mm (Twenty milimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (Five milimetre) thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the style and rails, joints mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundred into Fifty into One point nine zero milimetre) size with necessary screws etc. complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x16mm(Three hundred into Sixteen milimetres) size anodized aluminum sliding door bolts make of PILOT/ SHEEL or equivalent anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etcetra completed, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 250x16mm(Two hundred fifty into Sixteen milimetres) size anodized aluminum sliding door bolts make of PILOT/ SHEEL or equivalent anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etcetra completed, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 200mmx10mm (Two hundred milimetre into Ten milimetre) anodized aluminum tower bolts (Barrel type) make of PILOT/SHEEL or equivalent anodized transparent or dyed to required shade and colour with screws etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mmx10mm (One hundred milimetre into Ten milimetre) anodized aluminum tower bolts (Barrel type) make of PILOT/SHEEL or equivalent anodized transparent or dyed to required shade and colour with screws etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetres) size aluminium anodized PILOT/ Sheel or equivalent handles anodized transparent or dyed to required colour and shade with necessary screws etcetra completed, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing prelaminated board bwp phenol bonded exterior/interior grade both sides 12mm (Twelve millimetre) thick water proof of Action Tesa/ Century/ Kitlam/ Kitply/ Green ply, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing bright finished brass ball catcher 10mm (Ten milimetre) dia, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium hooks and eyes, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five milimetre) thick water proof commercial board Centuary/Alpro or equivalent in SDB shutter with 6mm (Six milimetre) hard wood edging and 0.63mm (Zero decimal Six Three milimetre) thick Plain Galvanised Iron lining of inner side of the shutter including fixing with nickel plated paino hinges with screws etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing Dr. Fixit Fast Flex polymer modified cementations coating consisting of cementation powder and a polymer liquid water proof coating shall be done in two coats as follows. Apply first coat of Dr. fixit Fast Flex to clean the saturated surface maintaining a coverage of 6-7 (Six to Seven) sqm (0.60 sqm) (Zero decimal six zero square metre) per kg to achieve 1mm (One milimetre) thickness. This coating shall also be extended upto 300mm (Three hundred milimetre) height vertically. The second coat shall be applied in opposite direction on after 4-6 hrs. (Four- Six hours) of application of first coat. Then sprinkle sand on top surface of applied Dr. Fixit Fast Flex white still tacky over the second coat then apply cement mortar 1:4 (One cement isto Four Sand) with 200ml (Two hundred mili letre) of Pidi proof LW @ 200ml/50kg (Two hundred milimetre per Fifty Kilogram) of cement over the floor with suitable gradient towards drain pipe, while the second coat of Dr. Fixit is still tacky, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 50mm (Fifty milimetre) dia SST (stainless steel) pipe hand rail fixed with in combination 35mm (Thirty five milimetre) dia 15/20mm (Fifteen oblique Twenty milimetre) SST pipe of (Three) row between step and railing in equal space and jointing with electronic gas welding at top alongwith 50mm (Fifty miliemtre) diametre hand rail jointing in steps, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 50mm (Fifty milimetre) dia SST pipe hand rail slip resistant with round ends of two levels at 75 to 90cm (Seveny five to Ninety centimetre) height. It should extend 30cm (Thirty centimetre) beyond the top and bottom of the ramp as per detail with 25mm (Twenty five milimetre) dia SST pipe balusters welded to 50mm (Fifty milimetre) dia SST pipe embedded in cement concrete as per detail and PWD specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel grab bar with necessary nuts and bolts etc. complete in all respect, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Kota stone 25mm (Twenty five millimetre) thick in single slab kota stone with round nosing in flooring on 20mm (Twenty milimetre) thickness base with cement mortar 1:4 (One cement isto Four Sand) laid over and jointed with cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete upto floor any level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Kota stone 25mm (Twenty five millimetre) thick in single slab in skirting, risers of steps on 12mm (Tweleve milimetre) average thickness base with cement mortar 1:3 (One cement isto Three Sand) laid over and jointed with cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete upto floor any level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing in position concealed Everest wall Frame section for external wall/ ceiling using Everest Designer Fibre board ceiling tile of 600x600mm (Six hundred into Six hundred milimetre) over readymade powder coated metal sheet section Everest Stud having web of 51mm (Fifty one milimetre) and two flanges of 40/42 (Forty oblique Forty two) milimetre placed at 600mm (Six hundred milimetre) centre to centre vertically on track having 2 (Two) angles flange of 32mm (Thirty two milimetre) with thickness of 0.55mm (Zero decimam five five milimetre) everest cement Plank fixed to the Everest stud with 25mm (Twenty five milimetre) self drilling, self taping and web 51mm (Fifty one milimetre) everest track to fixed on existing floor and ceiling with nylon sleeves and fully threaded steel screws @ 600mm (Six hundred milimetre) C/C (centre to centre), countersunk Everest Fiber cement screws @ 200mm (Two hundred milimetre) centre to centre planks are overlapped by 25mm (Twenty five milimetre) as per Architectural drawing specification, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Acoustical panels ceiling of 600x1200x25mm (Six hundred into One thousand two hundred into Twenty five millimetre) thick of Baxune Acoustical/ Himalayan acoustical panels fixed with steel screws etc., as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Kota stone 25mm (Twenty five millimetre) thick size 55x55/55x27.5 cm (Fifty five into Fifty five oblique Fifty five into Twenty serven point five centimetre) with 7.5cm (Seven point five centimetre)wide Jaisalmar yellow band over 20mm (Twenty milimetre) average thickness base of cement mortar 1:4 (One cement isto Four Sand) laid over and jointed with cement slurry mixed with pigment to match the shade of slab including rubbing, nosing and polishing complete upto floor any level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Kota stone 25mm (Twenty five millimetre) thick in risers of steps, skirting dado and pillars on 12mm (Tweleve milimetre) average thickness base of cement mortar 1:3 (One cement isto Three Sand) laid over and jointed with cement slurry mixed with pigment to match the shade of slab including rubbing, nosing and polishing complete upto floor any level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x600x10mm (Six hundred into six hundred into Ten milimetre) full body Matt finish double charge/ Ultra charge vitrified tiles Kajeria/Elermity/ Nitco/Jonson/Simpolo/ Restile or its equivalent in flooring, on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying vitrified tiles (600x600x10mm) (Six hundred into Six hundred into Ten milimetre) in ultra charge vetrified tiles of Nitco/Rack/Kajaria/Orient/Bell/Simpolo grey/coloured of approved shade in flooring treads of steps and landing laid on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) and laid jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying (600x600mmx8mm (Six hundred into Six hundred into Eight milimetre) Ultra/ Matt charged vetrified tiles of Nitco/Rak/Kajaria/ Orient& Bell/Simpolo as per approved shade in skirting risers of steps and dados on 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three Sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 30x30x2.5 cm (Thirty into Thirty into Two point five centimetre) automatic hydraulically compressed and polished precast terrazzo tiles of ISI marked No.IS-1237of approved shade 20mm (Twenty millimetres) thick with white yellow green & maroon marble chips 0.B and 2B size of NTC or its equivalent of specified sizes in skirting and risers of steps and dado upto any heights laid on 10mm (Ten millimetres) average thickness of cement plaster 1:3 (one cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of medium shade complete in all respect upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 30x30x2.5 cm (Thirty into Thirty into Two point five centimetre) automatic hydraulically compressed and polished precast terrazzo tiles of ISI marked No.IS-1237 (50% white and 50% grey cement) of approved shade 20mm (Twenty millimetres) thick with white yellow green & maroon marble chips 0.B and 2B size of NTC or its equivalent of specified sizes in floors, treads of steps and landing on a bed of 25mm (Twenty five millimetres) average thickness of cement plaster 1:6 (one cement isto Six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing with tiles of silver grey shade complete in all respect upto all floor level, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 40mm (Forty milimetre) thick cement concrete flooring 1:2:4 (One cement is to Two Sand is to Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size laid in one layer finished with a floating coat of neat cement for all floors level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plaster skirting (upto 30cm height) with cement mortar 1:3 (One cement isto Three sand) finished with a floating coat of neat cement including rounding of junction with floor, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 30x30x2.5cm (Thirty into Thirty into Two point five centimetre) red sand stone slab labrodan design (rainbow series of NTC or its equivalent in treads and risers of steps on a bed of 20mm (Twenty milimetre) thick cement mortar 1:4 (One cement isto Four Sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including preparing of nosing including rubbing and granite polish finish complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 2mm (Two milimetre) thick heavy duty homogeneous vinyl flooring (Robust) ISI: 3462/1986 of Wonders floor or its equivalent as per approved shade over cement concrete flooring, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying spartic ceremic tiles 5.5mm (Five point five milimetre) thick of premium quality of Nitco/ Kararia/Sommany/Bell/AGL tile as per approved shade in flooring 300x300mm (Three hundred into Three hundred milimetre) size in treads of steps laid on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three Sand) finished with flush pointing in white cement complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x450mm (Three hundred into Four hundred fifty milimetre) size ceremic glazed tile of Kajaria/ Swastic/Sommany/Bell/AGL tiles in skirting/dado on 2mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three Sand) jointed with neat cement slurry finished with flush pointing in cement mixed with pigment of required shade to match the shade of tile complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

50mm (Fifty millimetre) thick cement concrete flooring with metallic concrete hardner topping under layer of 35mm (Thirty five millimetre) thick cement concrete 1:2:4 (One cement isto Two sand isto Four graded stone aggregate 20mm (Twenty millimetre) nominal size and top layer of 15mm (Fifteen millimetre) thick metallic concrete hardner consisting of mix 1:2 (One isto Two stone aggregate 6mm nominal size) by volume with which metallic hardner compound of approved quality is mixed in the ratio 4:1 (Four part of cement isto One part of metalic floor hardening compund of approved quality by weight) including finishing complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying marble work (table rubbed and polished) in flooring 20mm (Twenty milimetre) thick base in cement mortar 1:3 (One cement isto Three Sand) including jointing with cement mortar 1:2 (One white cement isto Two marble dust) with an admixture of pigment to match the shade of the marble 20mm (Twenty milimetre) thick Baroda green marble with round nosing rubbing, polishing complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Uni stone 12mm (Twelve milimetre) thick cladding on wall surface side as on faces of masonry walls etcetra 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding etc. complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal six zero milimetre) thick prepainted steel sheet ISI marked-Z-120 in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (Rmp) organic coating of 20 (Twenty) microns over 5(Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating of TATA/SAIL/Reliance/Jindal steels including fixing with prepainted self drilling and self tapping screw of size 5.5mm dia (Five point five milimetre diameter) and 55mm (Fifty five milimetre) length with EDPM seal complete with all accessories as required, as per the direction of Engineer-in-Charge, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (Sixty centimetres) overall with 0.60mm (Zero decimal sixty milimetre) thick prepainted steel sheet ISI marked Z-120 ridges (factory made) shall be having proper Gola/shape of steel sheet with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating of TATA/SAIL/Relinae/Jindal Steel including fixing with self drilling and self tapping screw of size 5.5mm (Five point five milimetre) dia and 55mm (Fifty five milimetre) length with EDPM Seal complete with all accessories as required, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimetre) overall with 0.60mm (Zero decimal sixty milimetres) thick prepainted steel roofing hot dipped metallic zinc coated sheet ISI marked Z-120 with top coat of regular modified polyester (RMP) organic coated of 20 (twenty) microns over 5 (Five) micron primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating of TATA/Sail/ Reliance/Jindal Steel including fixing with prepainted self tapping screw of size 5.5mm dia (Five point five milimetre diametre) and 55mm (Fifty five milimetre) length with self drilling EDPM seal complete within all accessories as required, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing flushing 38cm overall with 0.60mm (Zero point six zero millimetre) thick prepainted sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter and prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providng and Fixing Mild Steel Black Plain Sheet 2mm (Two milimetre) thick in eaves board/facia/soffits/ceiling including cuttng, fixing and welding to steel roof members and applying a coat of red lead primer complete (base members of steel work shall be measured & paid separately), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) dia on wall face P.V.C. (Poly Venyl Chloride) (D-Plast rain water pipe) finolex/ Relpipe (Reliance)/ Vectus or its equivalent of working pressure not less than 4.0 kg. per sqm.(Four point zero kilogram per square metre) including filling the joints with approved adhesive complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Propviding and fixing on wall faces P.V.C. (Poly Venyl Chloride) (D-Plast) or its equivalent accessories for rain water pipes conforming to BIS-495-2000 (BIS-Four hundred ninety five- Two thousand) including filling joints with approved adhesive complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, tolltax, sale tax, GST or any other taxes imposed by the Government.

P.V.C. (Poly Venyl Chloride) Plain bend 75mm (Seventy five milimetre) dia

P.V.C. (Poly Venyl Chloride) Plain Shoe 75mm (Seventy five milimetre) dia

Providing and fixing Mild Steel holder bat clamps of approved design to P.V.C. (Poly Venyl Chloride) rain water pipe 75mm (Seventy five milimetre) size embedded including cement concrete blocks 10x10x20cm (Ten into Ten into Twenty centimetre) of 1:2:4 (One Cement isto Two Sand isto Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size and cost of cutting holes and making good the walls etcetra, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimetre) wide and 25cm (Twenty five centimetre) deep 0.60mm (Zero point six zero milimetre) thick Plain Galvanised Iron sheet gutter TATA/ SHAKTI with iron brackets 40x3mm (Forty into Three milimetre) size bolts, nuts and washers etc. including making necessary connections with rain water pipe complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in building, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing angle iron cup-board (frame manufactured from M.S. (Mild Steel) angle iron sections 25x25x5mm (Twenty five into Twenty five into Five milimetre) thickness including hinges jambs, lock jambs, beed and if required angle threshold of M.S. (mild steel) 25x25x5mm (Twenty five into Twenty five into Five milimetre) welded or rigidly fixed by mechanically means lugs with split end tails to each jambs including steel butt hinges 2.5 mm (Two point five milimetre) thick with provision for locking arrangements and shock absorbers as specified and applying a coat of approved steel primer after pre-treat-ment of the surfaces, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20mm x 10mm x 2mm (Twenty into Ten into Two millimetre) and braced with flat iron diagonals 20mm x 5mm (Twenty into Five millimetre) size with top and bottom rails of T-iron 40mm x 40mm x 6mm (Forty into Forty into Six millimetre) with 38mm (Thirty eight millimetre) dia steel pulley complete with bolts and nuts looking arrangements, stoppers handles including applying a priming coat of red lead paint, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying and fixing rolling shutters of approved make made of 80mm x 1.25mm (Eighty into One point two five millimetre) M.S. Laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring shutters , as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 27.5 (Twenty seven point five) centimetre long wire spring grade No.2 for rolling shutters, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing top cover for rolling shutters as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Applying priming coat with Asian/ Nerolac enamel paint or equivalent over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting complete ready mixed paint brushing wood primer pink, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of Asian/Nerolac or its equivalent brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter Enamel paint other than white, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

6mm (Six milimetre) thick cement plaster to ceiling upto all height with cement mortar 1:3 (One cement isto Three sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on fair side of brick/concretes/ stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:5 (One cement isto Five sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and /or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:3 (One cement isto Three sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Distempering with white dry distemper Nerolac/ Asian of approved shade and manufacture (two coats) and of required shade on undecorated wall surface to give an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of Dune finish of NCL Altack/ Spectrum Texture wall finish natural Grit of heritage approved design/shade on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt dust and other foreign matter etcetra including sand paper, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Applying Birla J.k. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar droping, dirt, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Wall painting (two or more coats) with acrylic premium emulsion paint of Asian/Nerolac and manufacture of approved shade for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Wall painting (two or more coats) with acrylic emulsion paint of Asian/Nerolac and manufacture of approved shade for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

White washing with chalk whiting on undecorated wall surface ceiling (Two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar droppings and other foreign matter, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing plinth protection with 60mm (Sixty millimetre) thick interlocking paver with 23cm (Twenty three centimetre) dia half round stone ware pipe for drainage purpose fixed over concrete 1:5:10 (One cement isto Five Sand isto Ten stone aggregate 40mm (Forty milimetre) complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Saint-Gobain Gyproc (India Gypsum) MFT tile sand micro (600x600x15mm (Six hundred into six hundred into Fifteen milimetre) square edge tile (60%) in combination with Saint Gobain Gyproc (India Gypsum) fultone tile 600x600x12.50mm (Six hundred into Six hundred into Twelve point Five zero Millimetre) thick (40%) with rock wool backing (40mm (Forty millimetre) thick layer) fixed with Saint Gobain Gyproc powder coated T-Grid system or its equivalent @ 600mm (Six hundred millimetre) centre to centre complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Brick work common burnt clay building bricks in foudation and plinth in mud mortar, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying and stacking at site crushed stone aggregate 40mm (Forty milimetre) nominal size, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 60mm (Sixty milimetre) thick interlocking blocks heavy duty precast cement concrete interlocking paver blocks vibro compacted upto M-50 (M-Fifty) grade i.e. Border or kurb block grey or coloured over sub base of concrete with 25mm (Twenty five millimetre) thick average thickness of cement mortar 1:4 (One cement isto Four Sand) laid over jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing or polishing complete (sub base concrete floor to be paid for separately), as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying in trenches ISI marked 20mm (twenty millimetres) nominal bore galvanized mild steel tubes (Medium Grade) tube fittings (earth work in trenches to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST. malkana and any other taxes imposed by the Government.

Making connection of galvanised mild steel distribution branch with galvanised mild steel main 20mm to 40mm (Twenty milimetre to Forty milimetre) nominal bore by providing and fixing tees, including cutting and threading the pipe complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing vittreous china wash down water closet squatting pan Indian type W.C. Pan seat No.20090 (Twenty thousand ninety) of size 53x41cm (Fifty three into Forty one centimetre) with white shade of Hindware/Jaquar/Cera of Star white/Snow white shade Orissa pattern (earth work,bed concrete, foot rest and trap to be measured and paid for separately), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixng Vitreous china wash down water closet European type W.C. Pan S.No.20087 (Twenty thousand eighty seven) (S-18) of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetre) of Hindware/Jaquar/Cera of Star white/Snow white shade and its equivalent with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One Cement isto One Sand) (Earth work and bed concrete to be measured and paid for separately) Indian Universal closet, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixng Vitreous china wash down water closet European type W.C. Pan S.No.20087 (Twenty thousand eighty seven) (S-19) of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetre) matrix of Hindware/Jaquar/Cera of Star white/Snow white shade and its equivalent with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One Cement isto One Sand) (Earth work and bed concrete to be measured and paid for separately) Indian Universal closet, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china 100mm (One hundred milimetre) size 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement isto OneSand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing plastic seal (solid type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers Solid type white plastic seat and cover, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing flat back type of Cera/ Hindware/Jaquar/ Star white/Snow white shade or equivalent of size 390mm x 375mmx590mm (Three hundred ninety into Three hundred seventy five into Five hundred ninety milimetre) vitreous china bowl patern urinal No.60002 (Sixty thousand two) including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) auto cistern urinals complete etcetra, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china Division plate pattern urinal of size 450x350mm (Four hundred fifty into Three hundred fifty milimetre) with integral longtitudinal flush pipe, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetre) nominal bore C.P. Brass flush pipe/ spreaders for urinal with fitting such as unions, clamps etc. (all in C.P. Brass) including cutting holes and making good the same, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing flat back 580x430 mm (Five hundred eighty into Four hundred thirty milimetre) vitreous china wash basin with single hole for pillar tap of Garnat No.10080 (Ten thousand eighty) with under counter of Hindware Cera/Jaquar of star/ Snow white with C.I. (Cast Iron) or M.S. (Mild Steel) brackets painted white including cutting holes and making good the same but excluding fittings, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing flat back 55x40cm (Fifty five into forty centimetre) vitreous china wash basin with single hole for pillar tap of Garnat No.10010 (Ten thousand ten) with under counter of Cera/Jaquar of Star/ Snow white Hindware with C.I. (Cast Iron) or M.S. (Mild Steel) brackets painted white including cutting holes and making good the same but excluding fittings, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing flat back 580x430 mm (Five hundred eighty into Four hundred thirty milimetre) vitreous china wash basin of Matrix Garnat No.10080 (Ten thousand eighty) with under counter of Cera/Jaquar of Star/ Snow white Hindware with C.I. (Cast Iron) or M.S. (Mild Steel) brackets painted white including cutting holes and making good the same but excluding fittings, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetre) dia C.P. Brass chain of Continental series of Jaquar/ Classic series of Hindware/ Floaral series of Cera 50cm (Fifty centimetre) long and rubber plug for sink or wash basin, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimetres) diameter C.P. brass waste of Continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera for wash basin or sink, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into four hundred fifty milimetre) bevelled edge mirror of superior glass mounted on 6mm (Six milimetre) thick A.C. (Asbestos Cement) sheet or plywood sheet and fixed to wooden plugs with C.P. (Chromium Plated) Brass screws and washers, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into twenty milimetres) Towel rail of Continetal series of Jaquar/Classic series of Hindware/Floral series of Cera I.S. marked complete with C.P. (Chromium Plated) brass brackets fixed to wooden plugs with Chromium Plated brass screws, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Glass shelf with C.P. (Chromium Plated) brass 600x120mm (Six hundred into One hundred twenty milimetre) of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera brackets and guard rail complete, fixed to wooden plugs with C.P. (Chromium Plated) Brass screws, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. (Chromium Plated) brass toilet paper holder of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing charomium plated brass soap dish with C.P. brass brackets of continetal serious of Jaquar/ Classic seies of Hindware/ Floral series opf Cera fixed to wooden cleats with C.P. brass screws, including carriage of material within all leads and lifts and othr incidentals. The rate includes, royality charges, octroi, sale tax, malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen milimetre) diametresC.P. (Chromium Plated) Brass Bib tap No.12 with capastan head of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen milimetre) diametres C.P. (Chromium Plated) Brass Pillar tap with capstan head of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen milimetre) diametre of C.P. (Chromium Plated) brass angle valve without nuts and pipe of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore P.V.C. (Poly Venyl Chloride) connection pipe with brass union 45cm (Forty five centimetres) length complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. (Chromium Plated) brass full way valve with wheel of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera 20mm (Twenty milimetre) nominal bore. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. (Chromium Plated) brass full way valve with wheel of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera15mm (Fifteen milimetre) nominal bore. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing brass ball valve (horizontal plunger type) high pressure with polythene plastic flats 20mm nominal bore, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ferrule including boring and taping the main 40mm nominal bore, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm ( Twenty milimetre) dia M.I. Union for wash basin or sink, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing water tank make P.V.C. (Poly Venyl Chloride) SINTEX having capacity of 1000 (One thousand) litres each tank ISI 12701 (Twelve thousand seven hundred one) G.I. (Galvanised Iron) necessary fitting including over flow pipe, scour pipe etectera for inlet and outlet and inside connection 15mm (Fifteen milimetre) nominal bore ball valve and marked its P.V.C. (Poly Venyl Chloride) cover with locking arrangements of good quality complete in all respect, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing in trenches high pressure 110mm (One hundred ten milimetre) diametre conforming to IS No.13592-92 (Thirteen thousand five hundred ninety two- Ninety two) P.V.C.(Poly Venyl Chloride) Diplast pipe Class A soil, waste and ventilating pipes fixing with adhesive mixture complete 8/4.6mm (Eight/Four point six milimetre) thick of supreme or its equivalent, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) dia high pressure of ISI marked of Fenolex/ REL pipe (Reliance/Victus) PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. Complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) (Conforming to I.S. No. 14735-99 (Fourteen thousand seven hundred thirty five - Ninety nine) P.V.C. (Poly Venyl Chloride) Supreme/ Kishan/ Astral or equivalent heel rest bend including filling the joints with approved adhesive complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) (Conforming to I.S. No. 14735-99 (Fourteen thousand seven hundred thirty five - Ninety nine) P.V.C. (Poly Venyl Chloride) Supreme/ Kishan/ Astral or equivalent heel rest bend including filling the joints with approved adhesive complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diametre (conforming to I.S. No.14735-99 (Fourteen thousand seven hundred thirty five - Ninety nine) P.V.C. (Poly Venyl Chloride) Single equal branch of Supreme/ Kishan/ Astral or equivalent medium class, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) diametres confirming to I.S. No.14735-99 (Fourteen thousand seven hundred thirty five - Ninety nine) P.V.C. (Poly Venyl Chloride) Supreme/ Astral or equivalent Collar including fixing with approved adhesive etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) diametres confirming to I.S. No.14735-99 (Fourteen thousand seven hundred thirty five - Ninety nine) P.V.C. (Poly Venyl Chloride) Supreme/ Astral or equivalent Collar including fixing with approved adhesive etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) dia PVC (Poly Venyl Chloride) single equal branch plain of Hindware/Cera/Jaquar ISI marked including fixing with approved adhesive etc. Complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) dia PVC (Poly Venyl Chloride) double equal branch with oval access door of Hindware/Cera/Jaquar insertion rubber washer 3mm (Three milimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. Complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetre) dia PVC (Poly Venyl Chloride) double equal branch with oval access door of Hindware/Cera/Jaquar insertion rubber washer 3mm (Three milimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. Complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) nominal diametre cast iron floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making good the walls and floors, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetre) size diametre M.S. Stay and clamps for sand/cast iron (spun) iron pipes, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) nominal size diametre M.S. Stay and clamps for sand/cast iron (spun) iron pipes, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 16mm (Sixteen milimetres) nominal bore/diametres 1216 (One thousand two hundred sixteen) polythene aluminium polythene (P.E A.L.P.E.) composite pressure pipe U.V. stabilized with carbon plastic confirming to IS 15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) of kitec or its equivalent for water supply including clamps at one metres spacing cutting fixing and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed on wall, including filling the joints with approved adhesive complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetres) nominal bore/diametres 1620 (One thousand six hundred twenty) polythene aluminium polythene (P.E A.L.P.E.) composite pressure pipe U.V. stabilized with carbon plastic confirming to IS 15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) of kitce or its equivalent for water supply including clamps at one metres spacing cutting fixing and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed on wall, including filling the joints with approved adhesive complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Kitec equal Tee 1216 (One thousand two hundred sixteen) 16mm (Sixteen milimetre) diameter composite end seal compression fitting as per IS:15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) for cold water supply for tees, elbows, reducers, connectors, coupling and clamps with jointing testing and fittings complete including cutting and making good the walls etcetra, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Kitec reducing Tee 1216 (One thousand two hundred sixteen) 16mm (Sixteen milimetre) diameter composite end seal compression fitting as per IS:15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) for cold water supply for tees, elbows, reducers, connectors, coupling and clamps with jointing testing and fittings complete including cutting and making good the walls etcetra, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Kitec female branch Tee 1216x1216x15mm (One thousand two hundred sixteen into One thousand two hundred sixteen into Fifteen milimetre) diameter composite end seal compression fitting as per IS:15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) for cold water supply for tees, elbows, reducers, connectors, coupling and clamps with jointing testing and fittings complete including cutting and making good the walls etcetra, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Kitec equal Tee 1216 (One thousand two hundred sixteen) 16mm (Sixteen milimetre) diameter composite end seal compression fitting as per IS:15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) for cold water supply for tees, elbows, reducers, connectors, coupling and clamps with jointing testing and fittings complete including cutting and making good the walls etcetra, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Kitec Male Thread connectors1216x15mm (One thousand two hundred sixteen into Fifteen milimetre) thread Composite end seal compression fitting as per IS:15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) for cold water supply for tees, elbows, reducers, connectors, coupling and clamps with jointing testing and fittngs complete including cutting and making good the walls etcetra, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Kitec Female connector 1620x15mm (One thousand six hundred twenty into Fifteen milimetre) thread Composite end seal compression fitting as per IS:15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) for cold water supply for tees, elbows, reducers, connectors, coupling and clamps with jointing testing and fittings complete including cutting and making good the walls etcetra, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Kitec Couplers 1620 (One thousand six hundred twenty ) Composite end seal compression fitting as per IS:15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) for cold water supply for tees, elbows, reducers, connectors, coupling and clamps with jointing testing and fittngs complete including cutting and making good the walls etcetra, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Dora size 510x430x203mm (Five hundred ten into Four hundred thirty into Two hundred three milimetre) KC-1004 (One thousand four) of Cera or its equivalent stainless steel Kitchen sink with drain board and C.I. (Cast Iron) or M.S. (Mild Steel) bracket painted white including cutting holes in walls and making good the same but excluding the cost of fitting, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Dora size 470x420x178mm (Four hundred seventy into Four hundred twenty into One hundred seventy eight milimetre) KC-1004 (One thousand four) of Cera or its equivalent stainless steel Kitchen sink with drain board and C.I. (Cast Iron) or M.S. (Mild Steel) brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax or any other taxes imposed by the Government.

Providing and fixing 10.00 Ltrs (Ten Litres) capacity P.V.C. (Poly Venyl Chloride) low level flushing cistern I.S. (Indian Standard) marked No.21028 (Twenty one thousand twenty eight) of Hindware /Cera/ Jaquar star white with a pair of C.I. (Cast Iron) or M.S. (mild steel) brackets, with fittings such as lead valve less siphon, 15mm (Fifteen milimetre) nominal size brass ball valve with polythene float, C.P. (Chromium Plated) brass handle unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia (Forty milimetre) diameter C.P. (Chromium Plated) flush bend including cutting holes in walls and making good the same and connection the flush bend with cistern and closet (overflow pipe to be measured and paid for separately), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. (Chromium Plated) brass Jet spray of approved quality Continental series of Jaquar/Classic series of Hindware/ Floral series of Cera and of colour/approved shade with one metre tube, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm dia chromium plated grating of continental serious of Jaquar/ Classic series of Hindware/ Floral series of CERA superior quality for floor, gully or nahani trap, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetre) dia P.V.C. (Poly Venyl Chloride) waste pipe of Hindware/Cera/Jaquar, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (One cement isto Five Sand isto Ten graded crushed stone aggregate 40mm (Forty milimetre) nominal size) in haunching of stone ware pipe of 100mm (One hundred milimetre) internal diametres including concrete bedding for stoneware pipe, necessary form work and curing complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC (reinforced cementconcrete) top slab in 1:2:4 mix (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size), foundation concrete 1:4:8 (One Cement: Four Sand: eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size, inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One Cement: Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing Inside size 800mmx800mm (Eight hundred milimetre into Eight hundred milimetre) and 500mm (Five hundred milimetre) deep including C.I. (Cast Iron) cover with frame, (Light duty single seal pattern –I) 455mmx610mm (Four hundred fifty five into Six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15kg (Ffteen kilogram) with 300mm (Three hundred milimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (One Cement: Three Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC (reinforced cement concrete) top slab in 1:2:4 mix (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size, foundation concrete 1:4:8 (One Cement: Four Sand: eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size, inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One Cement: Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size finished smooth complete including curing and testing Inside size 800mmx800mm (Eight hundred milimetre into Eight hundred milimetre) and 1000mm (One thousand milimetre) deep including C.I. (Cast Iron) cover with frame, (Light duty single seal pattern –I) 455mmx610mm (Four hundred fifty five milimetre into Six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15kg (Ffteen kilogram) with 300mm (Three hundred milimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (One Cement: Three Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm dia (One hundred ten milimetre) diametre P.V.C.( Poly Venyl Chloride) cowl, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing an d fixing 110mm dia (One hundred ten milimetre) diameter nominal size P.V.C. (Poly Venyl Chloride) collar, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 200mm (Two hundred milimetre) wide C.I. (cast iron) rungs with chequred or ribbed non slip surface including fixing in septic tank with 200mmx200mmx100mm (Two hundred milimetre into Two hundred milimetre into One hundred milimetre) cement concrete 1:3:6 block (One cement isto Three Sand isto Six graded crushed stone aggregate 20mm (Twenty milimetre) nominal size), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying and fixing medium duty 500mm dia (Five hundred milimetre) diametre cover with weight 58 kgs (Fifty eight kilogram), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.I.(cast iron) cover (medium duty) with frame for man hole internal dimension 455mmx610mm (Four hundred fifty five milimetre into Six hundred ten milimetre) rectangular C.I. (Cast Iron) cover. The weight of cover to be not less than 38 kg (Thirty eight kilogram) complete (weight of cover 23 kg (Twenty three kilogram) and weight of frame 15kg (Fifteen kilogram) in all respect, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing sluice valve (with hand wheel) as per IS class-I including brass spandale 150mm dia (One hundred fifty milimetre) diameter, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

M/s Surindera Traders

M/S BALDEV KUMAR GOVT. CONTRACTOR

Ashwani Sood