ADDN /ALTN AND SPL REPAIRS TO EXTERNAL WALL SURFACES OF EPCT SCHOOL (P-293), KASTURI EXAM HALL (T-23) AND LOGISTICS COMPLEX (P-157) AND SPL REPAIRS TO 4 X BATHROOM OF GOMATI BLOCK (P-210) AT INS SHIVAJI LONAVLA

Amount

Dismantling floor, hearth or wall tilling including cement mortor bedding (but incl backing), removing serviceble tiles to store and rubbish off the premises complte all as specified.

Demolition of stone slabs and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortor complete all as specified.

Demolition of cement concrete (unreinforced) in floors, sunken floors and in any description

Demolition of reinforced cement concrete in any position not otherwise specifically provided for

M & L RCC type B1, 1 :2:4 (using 20mm graded sotne agregate) in slabs suported in walls and the like and including demolition of old reinforced cement concrete of any escription, in any position complete all as speified.

M &L for use and waste of form work to soofits of suspended slab and the like fair finished flat complete all as specified.

M & L for mild steel TMT bars upto 8mm dia cut to lenth, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed ) not less than 0.9

M & L for mild steel TMT bars upto 10mm dia cut to lenth, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed ) not less than 0.10

Dismantling of existing water proofing treatment consisting of cement mortar, tarfelt and foreign material etc including cleaning the surface and removal of dismantled materials outside MD land.

Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6

M&l for Glazed ceramic tiles of any colour in vertical surfaces 300 x 600x 8mm thick mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4

M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms,urinal partions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed.

Preparing RCC surfaces which shall be made dry, clean, even and checked for soundness, removal of oil, dirt, laitance and other contaminants manually and surface shall be fairly smooth finish.Chamfering the floor wall junctions with cement mortar 1:4 admixed with Nitobond SBR or equivalent @1 litre per 50 Kg bag of cement. Down take sewage pipe annular spce packing using Conbextra GP2 or equvalent mixed with water and filling as per manufacturer's specifications. Water pondingfor minimum 48 Hrs and injection grouting of construction joints, leaking spot and honey combs with cementious pressure grouting with 40 psi pump using Cebex 100 or equivalent @ 225 gms mixed to 50 Kg bag of cement including joints packing using polymer modified mortar. Providing and applying water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surface and 1.5 mm thick (2 coats) with interval period of 6 Hrs over a substrata using spray/ squeegee/ roller/ brush. Water proofing coating shall have the elongation of 500 - 700% (ASTM D412-90), tear resistance of 21 KN/ m (ASTM D624-90), and the tensile strength of >1.9 N/ mm2 (ASTM D412-90). Termination to done on wall extending the coating to minimum 300 mm height above the finished floor level as per vendor recomendations. Laying 4mm APP membrane using bitumen 85/25 over Nitoproof 600 coating with overlap sealed before providing screed concrete. Make: IWL/STP or equivalent as approved by the GE.

M&L for PCC lean concrete 1:5:10 type E2 laid in layers of not more than 10cm thick tamping etc complete all as speciified and directed by Engr-in-Charge

M&L for 75mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in sub floor all as specified and as directed

M&L for Brickwork with Modular bricks, straight or curved on plan to any radius,in half brick thick built in CM 1:4 in narrow widths including Cutting out bricks/stone, for- ming toothing for, and bonding new into old brickwork /stone masonry

M&L for Brickwork with sub class B bricks , straight or curved on plan exc 6m mean radius, built in CM 1:4 in narrow widths including Cutting out bricks/stone, for- ming toothing for, and bonding new into old brickwork /stone masonry

M&L for 5mm thick rendering in cement mortar 1:3 on ceiling finished even and smooth without using extra cement all as specified and directed.

M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement)

M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and smooth with WPC all as specified and as directed (Note : WPC will be measured and paid separately)

Supply Integral Water Proofing Compound

M&L for preparation of new plastered surface of ceiling surface and applying three coats of white wash etc all as specified and directed.

M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty

M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed.

Dismantling of cast iron/PVC or reinforced concrete drain pipes, jointed in cement mortor anf taking out of trenches if required 100/75 mm internal dia pipe complete all as specified.

S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls..

S&F PVC (SWR) bends of 110 mm dia bore with access door

S&F PVC(SWR) vent cowl of 110mm dia bore.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 110 mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm dia

S&F PVC (SWR) bends of 75mm dia bore

M & L PVC Nahani trap100mm size with grating including jointing to waste pipe fixed in cement concrete type type B1 (1:2:4)

S & F in repairs Wash basin white, vitreous china Oval shape ,size 550x400 mm, including cutting granite top and fixing incl PVC waste pipe PVC connection CP waste coupling CERA -CAT No. S2030103 wash basin and complete all as specified

S&F in repairs two piece EWC 680x360x765mm white, with seat cover and Twin flushing cistern complete all as specified and directed by Engr-in-Charge as per CERA -CAT No. S1021103 S Trap 230mm, CAT No S1060101 Cistern, CAT No B1510101 seat cover, CAT No B1810101 Twin Flush fittings all as specified

S&F in repair vitreous China wash down water closet pan (Orrisa pattern) size 580x440mm with integral foot rests, white including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe and Twin flushing cistern CAT No S1060101 Cistern CAT No B1810101 Twin Flush fittings complete etc.

Vitreous China urinal, coloured of size 420x395x635mm large flat back with all fittings including CP spreader, CP connection suitable for 15mm bore stop valve, discharge pipe and taking down the existing one. Make Cera – CAT Nio.S4020102 and urinal Spreader Cera – CAT No.F8070201

S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, fancy type,long shank, chromium plated ,screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs Make Cera – Cat No. F2006101 or Equivalent

S&F in rep Bib taps 15 mm dia, fancy type flap type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe fixed in repairs Make Cera – Cat No. F2002163 or Equivalent

S&Fin rep push button taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe fixed in repairs Make Cera – Cat No. F2002163 or Equivalent

S&F in rep cocealed type stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs

S&F in rep Stop/angle valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs

S&F in rep Gate valve 40mm dia, screwed both ends for 40mm dia CPVC pipe or for unions fixed in repairs

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

Brass chromium plated overhead shower rose 120 mm dia with 3 flow with swivel joint, including shower arm, fixing to steel pipe or union including taking down old shower rose complete all as directed and specified by Engr- in- Charge. Make Cera shower rose F7020305 shower arm F7040104 or equivalent in Hindware/ Parryware.all as specified and directed

Stainless steel soap dish, white of size 160X160X90 mm as approved fixed with brass screws or embedded in wall . Make : Cera Cat No. F5003106 or equivalent in other makes as specified

Towel rail brass chromium plated fancy type 60cm long including bracket fixed between flanges complete Make: Cera Cat No. F5007103 or equivalent in Hindware/ Parryware

S & F Aluminium coat hooks solid body 175mm to 250mm

S&F Salt glazed stone ware gully traps square or round mouthed type 150 mm x 150 mm. type 'P'

Taking up or down steel tubing 15 mm and connection, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 25mm and connection, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 40 mm and connection, including cleaning for refixing or removal to store complete all as specified.

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F CPVC pipes, SDR 11, 40 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F in repairs High density polythylene (HDPE) pipes 50 mm dia, of pressure rating 6 Kg/sq cm, fixed to walls, ceilings or in floors complete all as specified and as directed.

Cement concrete type C-2, 1:3:6 (40 mm graded aggregate 75 mm thick as as in plinth protection complete all as specified.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqcm with shutter (without taking of shutter from the frame.

Taking down chowkats or frames N.exc 1.5 Sqm with shutter (without taking of shutter from the frame.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100mm butt hinges, stainless steel medium weight fixed with stainless steel screws.

S&F aluminium handles cast type anodised 125mm size.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 250mm length.

Cutting holes in brick wall or stone walls built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 or cement concrete (1:2:4), type B1 as requried for depth of embedded portion of hold fasts or lugs measured from the face of the Jamb into the wall exc half brick & N.exc one brick all as specified and as directed.

S&F Bands, straps, ; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165

M&L for Machine cut green marble slab, 18-20mm thick, single piece in full length of window cill/jamb over and including cement mortar screed/backing coat, 15 mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking down existing steel / aluminium ventilator / window of any size or any description.

Aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.all as specified and directed

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

Preparing new steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide

S&F Cast iron work grade FG 150, unmachineed, in brackets, gully traps, gratings, railings, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 kg each

External facial wall tiles of 300 x 600 x 8 mm size fixed with blended powder polymer modified cement based stone tile adhesive of thickness of approx 3-6mm thick combed with notched trowel and placed and tapped properly to ensure complete coverage of backside of tiles over adhesives including cleaning/preparation of newly plastered surfaces to be tiled and making it free from wax, grease, polish, paints and joints are properly filled etc all as per manufacturers instructions. Water absorption as per relevant BIS - 15622 (as amended). Note : Strictly apply the adhesive paste which can be tiled within 10-15 minutes . Roff Stone tile adhesives/Dr Fixit Fevimate TL tile fixing adhesive.

PVC (SWR) bends any radius 110 mm bore

M & L for complete removal of existing treatment and applying two coats of Anti fungal paint (Apex or Equivalent)over a coat of acrylic primer on external walls of Bldg of height upto 15 m above GL including scaffolding all as specified.

Chipping, removing carefully loose plaster/Hard concrete by low impact hammer without damaging the structure including cleaning and disposal of malba outside premises complete all as specified and as directed by Engr-in charge. Note: Hard concrete should not be removed by force.

Material and Labour for clean existing reinforcement with wire/rotary wire brush making the surface free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer confirming to ASTM B 117 on the rebars including cleaning the reinforcement wire brushing to remove loose rust spalls with time intervals of 1 hour between coats and fill the suitable micro concrete complete all as specified and as directed by Engr-in charge.

S&F Rolled mild steel section in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc quality conforming to Fe 410-W (Gde E250) quality-A.

S&F MS plate 6mm thick (Plain or chequred) ,channels, and counter sank forming holes, with out any attachment FE-410-W (Code E - 250) Quality - B

M&L Mild steel screw bolts 10mm dia for shank(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 5cm but n exc 10cm long

Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tags pping screws/ L-type or J-type or cranked hook bolts complete as specified.

M&L for cutting ,grooves or rebates n.exc 15cm girth and triming surface for inserting pre-painted galvatume sheet with or without reinforcement.

M&L cement filleting in CM 1:3 in roof sectional area n.exc 50 sqcm in repair.

M&L Granite of tiles 20 mm thick machine cut and inserted in the grooves and jointed with grey cement pointed with white cement including grinding round and flush with the external surface of facial tile including necessary scaffolding etc complete where ever directed by Engr in charge

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for issue under Schedule of credit and making good disturbed surfaces of walls, floors, etc.

M & L for point wiring with 1.5 sq mm single core FRLS PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover / PVC Switch Board mounted on wall for mounting the switches , socket outlets , fan regulators etc all as s specified and directed for following. (a) One light/Fan point controlled by one switch.

(b) One socket 3 pin outlet 5 amp on independent board.

All as per item no 2 above but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm.

S&F in repairs switch piano flush type single pole one way 5 amp.

S&F in repairs ceiling rose three terminal/PVC polycarbonate, isolated body complete all as specified.

S&F in repairs switch socket combination 2 in 1, 3 pin 5/15 amp flush type universal.

S&F in repairs switch socket combination 2 in 1,5 amp flush type.

Labour for taking down and after repairs refixing to Ceiling Fan, Exhaust Fan, any Make & any Sweep Oiling, Greasing , removing all dust with painting and replacement of unserviceable spares, complete all as directed by EIC at site. NOTE : Spares shall be measured & paid resperative item of this sch.

S&F of Tubelight Rod ultra bright LED tubelight with very high efficacy suited for installation in existing tubelight G13 lamp holder to give glare free light for 18W20W/22W complete all as required at site and as directed by Engineer -in-Charge. Make : Havells,CRYSTAL812DSTL20WLED865GLASS or equivalent of Bajaj/Philips / Wipro

S&F of surface and wall mounted reagal batten for 18W20W/22W compact batten suitable for single LED Tubelight with integral LED driver complete with all accessories complete all as required at site and as directed by Engineer -in-Charge. Make : Havells,REGALBATTENT8UPTO1X22WSSBSWH or equivalent of Bajaj/Philips / Wipro

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completewith aluminum housing & integrated electronic driver . Make: Havells Lumiine+BS10WLED865SPCSS or equivlent Bajaj/Philips

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed. Make : Anchor / Cona / Bajaj

Supply and fix new adore LED lamp 9 Watt Inverter bulb B22 CDL confirming to Cat No LHLDEGEDML8009 of Havell's or euivalent in Philips / Bajaj

S&F in replacemen MCB DB SPN 6 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed

S&F in repairs MCB SPN 40 to 63 AMP, 240 Volts 10KA 'C' curve , Complete all as specified and directed.

S&F in repairs MCB SP 5 To 32 AMP, single pole 240 Volts 10KA 'C' curve, Complete all as specified and directed.

Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to disturb surface of wall and match with the existing surface.

M&L for sub main wiring drawing through PVC casing and capping with two single core 4 sq mm and one run of 4 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed. Note:- Three run of 4 sqmm wire and One run of PVC casing caping will be measured as one running meter.

Dismantling and Refixing of Existing Hot Water GI tubing Heavy grade including Insulation (Rockwell Insulation 50 mm Thick), Cladding (24 gauge Aluminium Cladding) & Secondary Supports with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc fixed complete to walls and ceiling or laid in floors for 50 mm size of pipes complete all as specified and as directed

M&L for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of volts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition.

SAI SAMARTH ENTERPRISES

VIJAYA ENTERPRISES

M/s S.D Construction Co