SPL REPAIR OF BLDG NO P-23, P-24 AND P-43 (JCO MD ACCN ) OF 447 COY ASC (SUP) TYPE G UNDER GE DEHRADUN

Demolition of brick work built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified.

Taking down cement or cement lime plaster/tile work on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified.

M&L 5 mm thick plastering on ceiling surfaces in CM (1:4) even and smooth without using extra cement complete all as specified & directed.

M & L rendering 15 mm thick on cement mortar 1:6 finished fair/ unfair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound on fair/ unfair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: WPC will be measured and paid separately under respective item of this schedule.

Supply only liquid water proofing compound (Dr Fixit or equivalent) @ 0.20 ml per bags of cement complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and finally rubbed and smooth with sand paper complete all as per SSR part-I and as directed.

M&L for preparation of newly plastered surfaces of walls complete all as per SSR part-I and as directed.

M&L for applying interior grade wall care putty 1 to 1.50 mm thick to make the surface smooth as specified and directed

M&L for applying exterior grade wall care putty 1 to 1.50 mm thick to make the surface smooth as specified and directed.

M&L applying two coat of oil bound distemper over a coat of alkali resistant primer on newly plastered or unplastered wall or putty surface including preparation complete all as specified.

M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparing plastered or unplastered new surface of walls and applying three coats of white wash on wall Surface complete.

M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of white wash on wall surface complete.

M&L for preparing plastered or unplastered new surfaces of ceiling and applying three coats of white wash on wall Surface complete.

M&L for preparing plastered or unplastered old decorated surfaces of ceiling and applying one coats of white wash complete.

M & L 25 mm th PCC 1:2:4 type B-0 using 12.50 mm graded aggregate as in flooring, finished even and smooth without using extra cement.

M & L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregates as in padding on chajja, benching and etc including necessary scaffolding and formwork complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in coping,benching,anchorage blocks, lintels upto 1.5m clear span,cills, steps, sesmic & other similar bands, plinth course, lacing course, parapets & ralling upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs not provided for water trought & the like including weathering, slightly rounded or chemfered angels & throating as directed and specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified nad directed.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces including 15 mm thick screed bed in cement mortar 1:6 complete.

S&F non-skid coloured ceremic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces including 15 mm thick screed bed in cement mortar 1:6 complete.

M&L Rendering 10 mm thick in cm 1:4 for dado & skirting on brick/concrete wall surface finished fair and even for receiving tiles in vertical surfaces.

M &L Glazed Ceramic tiles coloured, of size 300 mm x 450 mm x 7 mm thick approved 1st quality as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed.

M&L for Machine cut kota stone slab flooring 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and mirror polishing complete all as specified and as directed. Note: Size of Kota stone shall not be less than 550 mm x 550 mm.

M& L Kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as specified.

Demolition of stone slab and tiles and laid bedded in any mortar of any description in floors, apron, etc.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified and as directed.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement in ground floor and paving below or above ground level incl demolition of old existing surface complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete.

S&F PVC connection 15mm size with PTMT nuts, of 450 mm length.

S&F CP bib tap short body fancy type cast copper alloy 15 mm bore screwed down with crutch or butterfly handle for iron pipe or for brass ferrule complete all as specified and directed.

S&F fancy type concealed stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15 mm dia iron pipe all as directed.

S&F in repairs CP brass fancy type Angle cock 15 mm dia ISI mark complete all as specified and directed.

S&F CP brass shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 600 mm PVC 'P' trap.

Demolition of reinforced cement concrete, of any description complete all as directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces complete all as specified and as directed.

M & L for RCC (1:2:4) (using 20 mm graded stone aggregate) as in slabs supported on wall, beam and columns in floors ,roof slabs, shelves and cover slab Including demolition of existing old RCC complete all as specified and as directed.

S & F mild steel TMT bar 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Taking down chowkat with shutter area exc 1.5 sq.m but n.exc 4 Sqm each complete

Taking down chowkat with shutter area n.exc 1.5 sqm each complete

Taking down shutter only area exc 1.0 sq.m but n.exc 2.00 sqm complete

Taking down shutter only area exc 1.0 sq.m but n.exc 2.00 sqm and refixing in the same opening after necessary easing and repair complete all as specified and directed.

M&L cutting holes in brick wall built in cement mortar exc half brick but nexc one brick for inserting or cement concrete 1:2:4 hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required.

S&F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:3:6 type C-0 ( 12.5 mm stone aggregate)

M&L 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.

S&F 35m thick factory made glazed and skeleton shutter open rebated and prepared to receive glass/ gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads or clearing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) of IInd class hard wood (Shisham).

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed.

S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity by Engr-in-Charge.

S&F factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old window complete all as specified and directed.

S&F factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old window complete all as specified and directed.

Dismantling of block board as in kitchen cabinets and making good disturbed surfaces to match with the existing complete all as specified and directed

S&F 18 mm thick PVC sheet of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed.

S&F 18 mm thick PVC sheet of one side plain and one side prelaminated colour to make kitchen cabinet Partition Shutter/ drawer Front, cup board shutters complete as per specifications and as directed.

S&F continous piono hinges 30 mm width of flap of stainless steel complete all as specified and directed.

S&F 150 mm MS powder coated Hasp and staples safety type, stove annnealed black including bolt to hings plate and fixed with screwed.

S&F 200mm mild steel powder coated barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125mm mild steel powder coated barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm mild steel powder coated handles cast type anodised complete all as specified and directed.

S&F 125mm mild steel powder coated handles cast type anodised complete all as specified and directed.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed complete all as specified and directed.

S&F 300 mm, mild steel powder coated ordinary rat rail rod pattern door springs including roller plate complete all as specified and directed.

S&F MS flat iron 25x3mm thick for hold fast including all necessary drilling, bolting or riveting, notching, chamfering, etc omplete all as specified and directed.

S&F 300 mm long mild steel powder coated sliding door bolt with hasp & stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

S&F in galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average aperature 1.18 mm complete all as specified and directed.

M/L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces including preparation, exc 10 cm width or girth, complete all as specified.

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified.

M&L for preparation of already primed new steel or iron surfaces and applying two coats of synthetic enamel paint exc 10 cm width or girth, complete all as specified. (Note: For steel windows only)

M & L applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete.

M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete.

M & L for surface preparation and treating of joints, filling of honey combs and providing 25 mm thick PCC (1:2:4) type B-0 with WPC over roof surface complete all as specified and directed.

M & L for rendering 10 mm thick plastering in cement mortar 1:4 with WPC (If ordered by Engineer-in-Charge) in roof surfaces surface finished even and smooth without using extra cement, complete all as specified and directed.

M & L for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed. Note: The work of water proofing treatment shall be got executed through original manufacturer or authorised applicator only.

S&F mild steel framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars barrel iron doors, ladders, frame balusters, walk ways, railing. Frame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 complete as specified and directed

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified

S&F in repairs 25mm dia stainless steel drapery rods with both side fixing bracket and fancy piece both side of rod, complete all as specified and as directed.

M&L for complete removal/ demolition of existing treatment of sunken portion such as WC & bath similarly use the following specification for sunken floor: (a) Clean the complete surfaces including rubbish for sunken and washing down with water. (b) Plaster for sunken portion in CM (1:3) with WPC (Dr. Fixit or equivalent) as per manufacturer's instructions. (c) Preparation of surfaces and applying one coat of polymeric primer @ 0.30 Kg/Sqm. (d) Supply and providing APP based polymeric water proofing members 3 mm thick of weight not less than 3.00 Kg/ Sqm. (e) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm. (f) M & L for PCC 1:5:10 complete mixed with brick bats 40 mm size. (g) M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) 40 mm thick finish even and smooth as specified.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sunken filling sub base or leveling course of floor etc complete all as specified.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed in walls complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in reapir PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bend 110 mm dia, any radius with oval access door complete all as required and as directed.

S&F PVC (SWR) bend 75 mm dia, any radius with oval access door complete all as required and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

S&F PVC (SWR) branch pieces 75 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

S&F PVC(SWR) branch pieces 110 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

S&F glass shelf assembly of 5.50mm thick glass , 12 cm wide and 60 cm long and CP guards of approved quality and fixed to wall with CP brass screws etc, complete all as specified and directed.

S&F PVC nahani trap of 75mm bore, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4) complete.

S&F waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe for WHB complete.

S&F in repairs Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets complete.

Supply and fixed pillar taps, swan neck type, 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe & fixed.

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S & F in repair 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position all as specified in SSR part I complete

S&F 20 mm dia ball brass valve high pressure with polythene float and fly nut complete scrwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified in SSR part-I & II and as directed.

S & F stainless steel kitchen sink without draining board made of stainless steel 1mm thick,coupling plug, washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantelever brackets and connecting union to pipe, overall size 495 mm X 420 mm, bowl size 410 mm X 330 mm X160 mm all as specified and directed.

S&F 15mm dia brass chromium plated Kitchen sink mixer with accessories for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F in repairs plate rack 200mm and size 60 x 75 cm made out off 1.00 mm thick stainless steel complete all as specified and as directed.

Demolition of PCC/terrazo floor in ground floor and paving n.exc 15 cm below or above ground level including tiles stone flooring etc.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

M & L for PCC type B-1 1:2:4 (using 20 mm graded aggregate) as in kerbs, coping and the like including weathering, slightly rounded or chamfered complete all as specified and directed.

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6, incl demolition of existing tile complete.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for foundation in soft /loose soil complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base, foundation filling, mass concrete, etc complete all as specified and as directed.

M& L salt glazed stone ware (SGSW) drain pipe of internal dia 150 mm laid in trenches and jointed in CM 1:1 grade 'A' complete all as specified and directed

M& L cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150mm bore pipe complete all as specified and directed

M & L for cutting into existing manholes for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded complete) smooth finished and reforming benching as required complete (internal dia of pipe 150mm).

M&L 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including dismantling of existing cover complete all as specified and as directed. NOTE : Reinforcement shall be Measured and Paid for separately under relevant Item(s).

Please Enable Macros to View BoQ information