State Plan-23-24 - Optimization, Production,Transmission, Energy Conservation - PWSS Section, Malampuzha S/F of Spare Raw Water Centrifugal pump in PIF raw water Booster Station - Spare Clear water pumpset to Walayar Zone in 3.5 MLD WTP ,Pudussery

Amount

Supply and Fixing of Spare Raw Water Pumpset at PIF booster of duty condition 95 m head and 125 lps

OD173758/2023-2024:Supply, erection, testing and commissioning of KWA pre-qualified reputed make Water lubricated Horizontal Split Case Centrifugal pump set having a speed of 1450 rpm & Duty conditions of 125 lps & 95 m head, having coupled motor with Bronze impeller, SS shaft, Steel Columns, Steel Strainer, CI Bowls & Bell mouth, CI Discharge head, Bronze wear rings with foundation bolts & nuts etc. complete including providing suitable concrete foundation including cost of cement sand and metal etc. complete. The combined efficiency of pump and motor shall not be less than 70%

OD173759/2023-2024:Supply, erection, testing and commissioning of KWA pre qualified reputed make horizontal solid shaft pump mounted TEFC squirrel cage 4 pole induction motor suitable for the above pump working 3 phase 50 Hz AC supply, working voltage 415. The motor shall confirm to EEF1/IS 325 digital motor protection relay shall be included in starter as per present IE rules.

OD173760/2023-2024:Supply, erection, testing and commissioning of suitable rating Fully Automatic starter with air break contact. Starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contactor and bypass contactor as per IE rules and code of practice etc. complete.

OD173775/2023-2024:Supply, laying, testing and commissioning of suitable size XLPE cables for the above pump set from panel board to starter and from starter to motor. considering energy conservation. Standard length 10 m/Motor(0.5% of rate of Pump, motor and starter)

OD173810/2023-2024:Supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing GI/copper strip buried in ground and giving double earthing to motor, starter, panel board etc. as per IE standards. (0.5% of rate of Pump, motor and starter)

OD173813/2023-2024:Supply, erection, testing and commissioning of heavy duty APP capacitor cylinderical gas filled type for the motor to get a power factor above 0.95. The capacitor shall confirm to IS 2834.(0.5% of rate of pump, motor and starter)

OD173817/2023-2024:Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non return valve with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valves. Valve sizes shall match the delivery size of the pump. (1% of rate of pump, motor and starter)

OD173819/2023-2024:Supply and fitting of suitable size best quality GI/MS pipe of thickness not less than 8mm for a total length of 10 m suitable for the above pump and connecting the delivery side of the pump with the valves, suitable specials, flanges, nut and bolts IR sheet etc. complete to connect with the pumping main. (1% of rate of pump, motor and starter) Valve sizes shall match the delivery size of the pump.

Supply and Fixing of Spare Clear water Pumpset to Walayar zone of duty condition 130 m head and 44 lps

OD173852/2023-2024:Supply, erection, testing and commissioning of KWA pre-qualified reputed make Water lubricated Horizontal Split Case Centrifugal pump set having a speed of 1450 rpm & Duty conditions of 44 lps & 130 m head, having coupled motor with Bronze impeller, SS shaft, Steel Columns, Steel Strainer, CI Bowls & Bell mouth, CI Discharge head, Bronze wear rings with foundation bolts & nuts etc. complete including providing suitable concrete foundation including cost of cement sand and metal etc. complete. The combined efficiency of pump and motor shall not be less than 70%

OD173856/2023-2024:Supply, erection, testing and commissioning of KWA pre qualified reputed make horizontal solid shaft pump mounted TEFC squirrel cage 4 pole induction motor suitable for the above pump working 3 phase 50 Hz AC supply, working voltage 415. The motor shall confirm to EEF1/IS 325 digital motor protection relay shall be included in starter as per present IE rules.

OD173857/2023-2024:Supply, erection, testing and commissioning of suitable rating Fully Automatic starter with air break contact. Starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contactor and bypass contactor as per IE rules and code of practice etc. complete.

OD173880/2023-2024:Supply, laying, testing and commissioning of suitable size XLPE cables for the above pump set from panel board to starter and from starter to motor. considering energy conservation. Standard length 10 m/Motor (0.5% of rate of Pump, motor and starter)

OD173883/2023-2024:Supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing GI/copper strip buried in ground and giving double earthing to motor, starter, panel board etc. as per IE standards. (0.5% of rate of Pump, motor and starter)

OD173904/2023-2024:Supply, erection, testing and commissioning of heavy duty APP capacitor cylinderical gas filled type for the motor to get a power factor above 0.95. The capacitor shall confirm to IS 2834.(0.5% of rate of Pump, motor and starter)

OD173907/2023-2024:Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non return valve with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valves. Valve sizes shall match the delivery size of the pump.(1.0% of rate of Pump, motor and starter)

OD173910/2023-2024:Supply and fitting of suitable size best quality GI/MS pipe of thickness not less than 8mm for a total length of 10 m suitable for the above pump and connecting the delivery side of the pump with the valves, suitable specials, flanges, nut and bolts IR sheet etc. complete to connect with the pumping main.(1.0% of rate of Pump, motor and starter) Valve sizes shall match the delivery size of the pump.

Working Charge

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

100.37.10.1:In situ fabrication of M.S. pipes of size 350mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.10.3:Cutting 350mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.10.4:Welding 350mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.10.5:Grinding cut and weld edges of 350mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.10.2:Fabricating M.S. flanges of diameter 350mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.1:In situ fabrication of M.S. pipes of size 250mm (I.D.) using 8mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete.

100.37.8.2:Fabricating M.S. flanges of diameter 250mm using 12mm thick M.S. plate including cost and conveyance charges of M.S. plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under-coat of primer etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.3:Cutting 250mm (I.D.) M.S. pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.4:Welding 250mm (I.D.) M.S. pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods, all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

100.37.8.5:Grinding cut and weld edges of 250mm (I.D.) M.S. pipes during fabrication work including all labour and hire charges of tools etc., complete: For pipes fabricated with 8mm thick M.S. plates.

Poweron Technologies

SURAS AGENCIES

Bidder Name

SURAS AGENCIES

Poweron Technologies

SRI ROYAL ELECTRICALS