Development of Landscaping

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Providing casing embankment using gravel from approved area in layers of 25 cm with compaction including cost of all materials, machinery, labour, all operations such as materials transporting, spreading in layer of specified thickness, breaking clods, sectioning, compacting each layer without watering by Road roller 10 tonne etc.,complete with 22 km transportation with loading & unloading and complete for finished item of work.

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Carting away the surplus excavated earth from the work site with a lead of 1.00 Km beyond initial lead including loading, unloading, conveyance and stacking charges etc., complete.

Compacting original ground supporting subgrade, Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2 MORD / 305 MORTH.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item ofwork. (APSS No. 402)

Supply and fixing of C.C. Kerb not less than M20 strength of size 600 X 400 X 110 mm thick with bottom thickness of 110 mm up to height of 330 mm and top width of 50 mm thick chamfering with 45° at starts at 330 mm height to 400 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including cost and conveyance of all materials & labour charges including transportation from approved source, loading & unloading charges including contractor profit & overhead charges complete for finished item of work..

Collection, supply and filling of Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve including cost and conveyance of all materials, labour charges, watering and compacting etc., complete as per ss under bed concrete

Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect, including cost and conveyance of all materials like cement, sand, water, tiles, etc., to site including all operational, incidental, labour charges, laying tiles to required slope as directed by the Engineer- in-charge etc., and overheads & contractors profit complete for finished item of work

Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for External walls.

Flooring with Galaxy Granite 18 mm to 20 mm thick (Premium Quality) high polished / Flame Finished / leather finished granite stone slabs other than black and regular colours with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Collection and spreading of good gravel including cost and conveyance of all materials to work site all labour charges and stacking to departmental guage etc., complete as per SS

Supply and fixing of Kadapa slab (rough) 50mm thick and size of 0.457x0.457m stone edging including excavating trench in ordinary soil, laying P.C.C (1:4:8) 100 mm thick and fixing the stone in alignment and refilling the excavated soil conveyance of all materials and labour charges including transportation complete for finished item of work

Supply & Fixing Sadarhalli granite stone with 5 line dressing Double Patti of 5' length seating benches with back rest and its width 16'' with 4" thick and 18" height with 4" thick and leg size 4'' width, including cost and conveyance of all materials like granite benche, cement, sand to work site loading ,un loading transport and all operational, incidental labour & lift charges,and overheads & contractors profit complete for finished item

Flooring with EPDM 15 mm thick regular colours with borders and design as per the pattern approved by the Engineer-in-Charge over CC bed already laid or RCC roof slab including including cost and conveyance of all materials, to work site and all operational, incidental labour & lift charges, and overheads & contractors profit complete for finished item of work

Providing 0.5 wide Coping with 18 to 20 mm thick High Polished granite up to 8'-00 (2.43 M) other than black and regular colours with borders and design as per the pattern approved by the Engineer-in-Charge , set over base coat of cement mortar (1:5) , 12mm thick using screened sand over the stone ,Brick masonry or CC bed already laid , including neat grey cement slurry of honey like consistency spread 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit complete for finished item of work for Coping (S.S.701 & special)

Providing cladding to wall with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.

Supply and placing of the V.R.C.C Nominal Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using CONCRETE MIXER with 20mm size HBG graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry and including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water, etc., to site and , centring using Steel scaffolding pipes , jack props , Waller’s , Foot plates , brackets , steel centring plates etc., including all operational, incidental and labour charges such as machine mixing, laying concrete, vibrator, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for footings

For Plinth Beam

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 500/ Fe 500D grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including overheads & contractors profit complete for finished item of work.( APSS No.126)

Providing and applying PMCC / Deco orient base or Equivalent exterior Texture ( borders and design as per the pattern approved by the Engineer-in-Charge ) of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, scaffolding charges, overheads and contractors profit etc., complete for finished item of work in all floors for external walls

Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site,and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply and fabrication of MS framed structure like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, MS Frame for chain link mesh works, Roof Trusses by using square / rectangular MS hollow section as per IS 4923 & Angles as per SP:6(1) IS Hand book, including cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing, cost & convenience of all materials including wastage to site and complete for finished item of work

Painting to new iron work with one coat of Red oxide primer and two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxid, including cost and conveyance of all materials like Red oxide primer, Synthetic Enamel Paint to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Vibrated Plain Cement Concrete M 20 Nominal mix using Concrete MIXER, 20mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete , including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centring, shuttering, machine mixing, lift charges, laying concrete, vibrating, curing, overheads & contractors profit etc., complete for finished item of work (APSS No. 402 & 403)

Filling with local sand for foundation trenches as per drawing and technical specification MORTH

Supply and laying of 3/8" turfted synthetic grass type (artificial) of 35mm pile height of fibre colour 4 field green + 4 olive green, root zone 4 jute+ 4 field green with covering of 14 stitches per 10 cm with double backing UV stable, 215 gram/sq.mt, coating with black SBR latex, duly fibres meet the most stingent environmental standards, including cost of material, transportation to the site, labor charges, etc., in complete item of work.

Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water,Rough stone Through stone, Coursed stones etc., from approved quarry, to site, including labour charges for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing, charges for scaffolding etc., and overheads & contractors profit complete for finished item of work. (APSS No. 601 & 615)

Supply and fabrication works like Window Grills, Compound Wall Grills, Iron Doors, Windows, Gates, Roof Trusses by using MS solid plate section as per IS 1730 including cost of welding rods, power charges, labour charges for cutting, placing, welding & erecting in position and fixing cost & convenience of all materials including wastage to site and complete for finished item of work.

Supply and fixing of cement bonded board 8 mm thick and laying as per the pattern approved by the Engineer-in-Charge on purlins, rafters, trusses, including cost and conveyance of all materials like approved cement bonded board, nails, labour charges , overheads and contractors profit etc., complete for finished item of work in all floors. excluding the cost of purlins, rafters, trusses.

Providing and laying of best tiled roofing with pressed clay (Mangalore tiles) size 200 x 127 x 12 mm Thick and laying as per the pattern approved by the Engineer-in-Charge on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including Rabbit wire mesh (Chicken mesh) of not less than 30 gauge and jointed neatly with white cement paste to full depth mixed with pigment of matching shade at required place including cost and conveyance of all materials like cement, sand, water, tiles, Rabbit wire mesh, white cement, wastage etc., to site including cost of all labour charges for mixing of cement mortar, scaffolding, lift charges, laying tiles to required slope as directed by the Engineer- in-charge , curing etc., and overheads & contractors profit complete for finished item of work.

Supply, Delivery and commissioning of 10 - No.s Ourtdoor Fitness Equipment (1 set) Prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 3.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 2.5mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 2.54mm are of heavy grade of TATA/JINDAL make with hot dipped galvanized with Mig welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball SKF bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mmX150mm

CHEST PRESS DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 3.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 2.5mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 2.5mm are of heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns ionized coated and zinc dipped joint with Mig welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm.

Main frame made from GI pipes are 114 mm, Foundation Plate – M S round plate of 220 mm and 10 mm thickness, Handle 42 mm and 13 mm G.I Pipes, The paint is Para coating, Long pipe closing cap – G.I Material.

TAI CHI SPINNER / FORE ARM TWIRL DOUBLE with center pipe shall be of minimum 100mm NB dia of thickness not less than 3.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 2.5mm & TAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 2.50mm are of heavy grade of TATA/JINDAL make with hot dipped galvanized with Mig welded Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless.

Prime stand pipe shall be minimum of 80mm NB dia of thickness not less than 3.00mm, pedel link pipe shall be minimum of 50mm NB dia of thickness not less than 2.5mm, handle frame pipes shall be minimum of 32mm NB dia of thickness not less than 2.5mm and handle grips shall be minimum of 25mm NB dia of thickness not less than 2.5mm are of heavy grade of TATA/JINDAL make with hot dipped galvanized with joint with Mig welded. The pedal frame are hinged over 80NB prime stand pipe with the help of specially heavy duty SKF bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm.

Three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 3.0mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 2.8mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 2.80mm are of heavy grade of make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with Mig welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm.

TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 3.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 2.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 2.5mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 2.50mm are of heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with Mig welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion.

Main center pipe & prime stand sleeve shall be minimum of 100mm NB dia of thickness not less than 3.0mm, Galvanized Iron, Handle frame & seat frame support shall be minimum of 32mm NB dia of thickness not less than 3.0mm and Sheet made of quality FRP sheet.

Main frame shall be minimum of 100mm NB dia of thickness not less than 3.0mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 2.5mm are heavy grade of TATA/JINDAL make with hot dipped galvanised joint with Mig welded with Plastic/Rubber grips on top end. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty NTN/SKF bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing

Pipe shall be minimum of 80mm NB dia of thickness not less than 3.00mm, pedel link pipe shall be minimum of 50mm NB dia of thickness not less than 2.5mm, handle frame pipes shall be minimum of 32mm NB dia and handle grips shall be minimum of 25mm NB dia heavy grade of TATA/JINDAL make with hot dipped galvanized joint with Mig welded. The pedal frame are hinged over 80NB prime stand pipe with the help of specially heavy duty NTN/SKF bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing.

Leg Curl Main frame made from GI pipes are 114 mm Foundation Plate – M S round plate of 220 mm and 10 mm thickness, Handle 42 mm and 13 mm G.I Pipes, Seat frame 42 mm GI Pipes, Seat 300*300 mm *2mm thickness with corner filler with safety, Leg frame 42 mm GI Pipes, Bearing Bushes – 60 mm seamless pipe.

Support pipe made by 42OD hot dipped galvanized pipe of Height 1524mm with GI thickness 2.5 to 3.00mm up to 60micron. The frame made from 32, 25, 20, 15, GI pipe Top Pipe: pipe top & horizontal pipe fixed to galvanizes pipe at the center and two junction box frame at the ends to attach leg pipes.

Main pipe made from 90 NB Mild G.I heavy quality of pipes, round pipe and seat pipes are made from 32 NB G.I with heavy quality of pipes. Seats are made from heavy G.I Sheets. Pipes: All metal pipes should be used heavy duty of Tata/Jindal make only with hot dipped galvanized pipes. Powder Coating: It will be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70microns. Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used. Bearing: Bearings is self-lubricated made of SKF/NTN/ Nachi make shall be provided for smooth and trouble free

Arc swing frame: 75OD or 90OD pipe bend in single piece & flat welded together with a flange 5mm thick & ISA of 8 x 3 x 8.5 L.W.H to form a strong frame at bottom and middle. The pipe is hot dip galvanized pipe conforming to IS 1239 with GI thickness of 60mm dia. Height of the frame is 2700mm. Top Pipe: 50NB Top pip with two arc swing glances welded at both its ends. Pipe can with standing torsional tress created due to swinging motion the 50NB top pipe is hot dip galvanized pipe of length 2950mm conforming to IS 1239 with GI thickness of 60. 3)Sweat Assembly: a) Swing clamp assembly: Swing clamps made up of two parts are joining together with M6 Allen Bolts along with S hook is specially designed swing pin. Hook: S-Hook of Dia 8mm & 145 x 130 triangular hook of grade SS 304 Chain: Rubber dip moulded swing chain of dia.

Swing support pipe made by 75OD or 90 OD Main frame hot dipped galvanized pipe of Height 1524mm with GI thickness 3.00mm up to 60micron. The swing frame made from 32NB, 25NB, 20NB, 15NB, GI pipe Top Pipe: swing top pipe top & horizontal pipe fixed galvanizes pipe at the center and two junction frame at the ends to attach leg pipes. Seat frames: Sitting platform and back supporting plate is made up Of heavy material. Bearing: Bearings is self-lubricated made of SKF/NTN/ i make shall be provided for smooth and trouble free movement. Pipes: All metal pipes should be used heavy duty of Tata/Jindal make only with hot dipped galvanized pipes. Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used.

Main Frame Structure: 50 OD hot dip galvanized pipes made up of GI pipe with Mig welding. FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with UV stabilizes pigment to give the required colour to the product. Thickness of the FRP material varies from 3mm to 5mm as per the product. The FRP material should be tested for abrasion resistance & UTS (Ultimate tensile test). Pipes: All metal pipes should be used heavy duty of Tata/Jindal make only with hot dipped galvanized pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60 micron. Powder Coating: It will be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70microns. It is tested for adhesion test (According to ASTM D 3359) with the help of cross hatch cutter instruments.Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps.

Swing pipes: Swing support pipe made by 75OD or 90 OD Main frame hot dipped galvanized pipe of Height 1524mm with GI thickness 3.00mm up to 60micron. The swing frame made from 32NB, 25NB, 20NB, 15NB, GI pipe Top Pipe: swing top pipe top & horizontal pipe fixed galvanizes pipe at the center and two junction frame at the ends to attach leg pipes. Seat frames: Sitting platform and back supporting plate is made up Of heavy material. Bearing: Bearings is self-lubricated made of SKF/NTN/ i make shall be provided for smooth and trouble free movement. Pipes: All metal pipes should be used heavy duty of Tata/Jindal make only with hot dipped galvanized pipes. Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps.

Swing pipes: Swing support pipe made by 75OD or 90 OD Main frame hot dipped galvanized pipe of Height 1524mm with GI thickness 3.00mm up to 60micron. The swing frame made from 32NB, 25NB, 20NB, 15NB, GI pipe Top Pipe: swing top pipe top & horizontal pipe fixed galvanizes pipe at the center and two junction frame at the ends to attach leg pipes. Seat frames: Sitting platform and back supporting plate is made up Of heavy material. Bearing: Bearings is self-lubricated made of SKF/NTN/ i make shall be provided for smooth and trouble free movement.Pipes: All metal pipes should be used heavy duty of Tata/Jindal make only with hot dipped galvanized pipes. Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps.

Four Seater See Saw: 4 No’s Seats made with FRP Fibre Seats or LLDPE and fitted both ends of 50mm dia pipe length 8ft with bolts and nuts and both fitted on Horizontal pipe Centre Main Frame Structure: 80NB hot dip galvanized pipes FRP Seats: 4nos of FRP seats FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed Pipes: All metal pipes should be used heavy duty of Tata/Jindal make only with hot dipped galvanized . Powder Coating: It will be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70microns. Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used. Bearing: Bearings is self-lubricated made of SKF/NTN/ Nachi make shall be provided for smooth and trouble free movement.

Main frame structure: Main pipe 42.5mm OD 3 to 3.5 mm thickness support pipe hinged over with 25mm outer dia pipes 2 to 2.5 mm thickness. Pipes: All metal pipes should be used heavy duty of Tata/Jindal make only with hot dipped galvanized pipes Welding: Welding shall be done with MIG welded and prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process should dressed of removing all sharp edges and burrs. Powder Coating: It will be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70microns. Colour: Multicolour for optional or customized and as per RAL shade. All open ends of pipe been closed by GI caps for user safety against entrapment

Pipes: Material Specification: The Slide is made up of Fiber Reinforced Plastic (FRP) in 3 parts with holding having shell thickness of 3 to 4mm. The slide is supported on a center support of 60 OD pipes. The landings supports of the slide are supported by 20 NB pipes. The Slide ladder is made up of G.I. Pipe & ladder hand – railing is made up of 25 NB G.I. Pipe. The triangular steps of the ladder are made up of 16 SWG G. I. Sheets. The safety railing of the slide is made up of 15 NB & 20 NB G. I. Pipe. The trader sand risers of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. * Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. * Material: Fibre Reinforced Plastic) with anti-skid surface on top FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with UV stabilizes pigment to give the required colour to the product. Thickness of the FRP material varies from 3mm to 5mm as per the product. All metal pipes should be used heavy duty of Tata/Jindal make only with hot dipped galvanized pipes.

support pipe made by 90NB hot dipped galvanized pipe with GI thickness up to 3.00. The frame made from 32NB, 25NB, 20NB, 15NB, GI pipe. Top Pipe: pipe top & horizontal pipe fixed to 50Nb galvanizes pipe at the center and two junction box frame at the ends to attach leg pipes.

Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work. excluding cost of grass, fertilizers and chemicals etc., for 1 Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 10 No./Sqm of plants & bag size shall be arrived based on the spacing 0.3 c/c as per the design.) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Digging of 0.6x0.6x0.6 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work. (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Supply of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants as per directions of officer in charge at site including cost of plants plants of bag size 7" x 8" of plant height not less than 1.0 feet, 8" x 10" of plant height not less than 3.0 feet, 13" x 13" of Tree/Palm height not less than 5 feet, 13" x 13" of plant (Hedges & Shrub) height not less than 2 feet, 15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is 0.75'' and above, 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the stem is 1'' and above. Heights mentioned above are excluding bag height. All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. the rates inclusive of cost of plants and complete for finished item of work. Lawn For Korean grass

Shrub / Hedge Planting in 0.30m trench BOUGAINVILLEA (DWARF)

EUPHORBIA MILLI

ACALYPHA WILKESIANA

JATROPHA INTEGERIMA

CARISSA CARANDAS

NERIUM OLEANDER

ALTERNANTHERA FICOIDEA

CASSIA AURICULATA

TABERNAE MONTANA

Butea Monosperma

Terminalia Arjuna

Terminalia catappa

Mimusops Elengi

Millingtonia Hortensis

Spathodea Campanulata

Loading and unloading of plants bag size (21"X21") at site of work and stacking for lead less upto 50 m and including labour charges, T&P etc.,and overheads & contractors profit complete for finished item of work (excluding cost of plant bag)

Loading and unloading of plants bag size (7"X8") at site of work and stacking for lead less upto 50 m and including labour charges, T&P etc.,and overheads & contractors profit complete for finished item of work (excluding cost of plant bag)