PROVN OF EXHAUST FAN LIGHTENING ARRESTOR SPECIAL REPAIR TO FIRE ALARM SYSTEM AND CERTAIN BR MINOR WORKS AT BRD AF STN CHANDIGARH UNDER GE AF MC CHANDIGARH

Amount

Taking down unserviceable analogue addressable optical multisensor detector of any size any type and supply and fix analogue addressable optical multisensor detector with smoke and heat combination with multiple sensitivity level programmable for timed automatic sensitivity and with base as per IS 11360 wiht suitable material as per CFEES recomendation complete all as specified and as directed by Engr-In-Charge. Make : Honey Well/Minimax/Syntex

Taking down unserviceable analogue addressable single action manual call point any size any type supply and fix addressable single action manual call point resettable type having on integrally mounted addressable moduled that monitor and reports contact status complete all as specified and as directed by Engr-In-Charge. Make : Honey Well/Minimax/Syntex

Taking down unserviceable analogue addressable fire alarm control panel of any size any type and supply, install, testing and commisioning of analogue addressable fire alarm control panel micro processor based networkable and expandable with dual stage alarm facilities like hooter, fire/fault indicator, audio visual signals, auto learn features PC networking connectivity, communication facility with battery backup for 8 hours normal opearation and 15 minutes alarm operation the control panel shall be provided with hot redundant CPU (degraded mode is not acceptable). The control panel, battery charger etc shall be UL listed. The panel shall be 1 loop capacity and it shall be capable to extend upto 3 loops. Fire alarm control panel of capacity from 99 detectors & 99 modules upto 200 detector and modules. The panel shall consist 640 characters LCD display and for net working with software and programming including maintenance free batteriescomplete all as specified and as directed by Engr-In-Charge.. Make : Copper or equivalent make of ISI marked

Taking down the unserviceable dual tone electronic sounder/hooter of any size any type and supply and fix dual tone electronic sounder/hooter enclosed in MS box duly painted wtih LED indication hooter complete all as specified and as directed by Engr-In-Charge.. Make : Safex/Honeywell/Minimax or equivalent to ISI marked

Taking down the unserviceable mini input module of any size any type and supply and fix mini input module or output addressable control module complete all as specified and as directed by Engr-In-Charge.

Taking down the unserviceable sub main wiring of any size any type and supply and fix 1100 volt grade, 2 x 1.5 Sq.mm + 1 x 1.5 Sq. mm earth wire FRLS multistranded copper conductor, PVC insulated, drawn through rigid PVC medium duty conduit of 19mm bore duly painted with fire resistant paint all as per relevant IS codescomplete all as specified and as directed by Engr-In-Charge. Make of wire : Plaza/Havelles/Finolex (ISI Marked) and Make of PVC conduit Diplast/Poly plast/Poly Pack (ISI Marked). Note:- three runs of 1.50 sqmm wire and one run of PVC conduit will be taken as one running meter for measurement and payment purpose and cost of the PVC conduit deemed to included in Quoted rate

Taking down the unserviceable sub main wiring of any size any type and supply and fix 1100 volt grade, 2 x 2.5Sq.mm + 1 x 2.5 Sq. mm earth wire FRLS multistranded copper conductor, PVC insulated, drawn through through rigid PVC medium duty conduit of 19mm bore duly painted with fire resistant paint all as per relevant IS codes complete all as specified and as directed by Engr-In-Charge. Make of wire : Plaza/Havelles/Finolex (ISI Marked) and Make of PVC conduit Diplast/Poly plast/Poly Pack (ISI Marked). Note:- Three runs of 2.50 sqmm wire , one run of PVC conduit will be taken as one running meter for measurement and payment purpose and cost of the PVC conduit deemed to included in Quoted rate

Material and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.50 metre below ground level earth plate surrounded by 15cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron and thimbles and of earth wire protected by galvanised iron pipe light grade 40mm bore and water pipe 20mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chanber in cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate incluidng 50mm thick precast cement RCC cover in 1:2:4 type B1 reinforced with 8mm dia TMT bars @ 75c/c both ways with 2 nos lifting handles of 12 mm dia MS plain bar duly painted with two cats of synthetic enamel paint, GI pipe 20mm dia light grade with funnel and wire mesh for watering and 40mm dia light grade GI pipe for earth lead protection etc complete all as directed.

Material and labour for point wiring using staranded copper conductor FRLS cable of size 1.5Sqmm, PVC insulated unsheathed complete in concealed PVC conduit medium grade incluidng all fittings and accessories, using MS terminal boxes of suitable size with frame plate with cover for mounting of modular type switches, sockets, fan regulators etc with screws and 1.5sqmm PVC insulated stranded copper conductor FRLS cable as continues earth wire connected to common earth dolly complete all as specified and as directed by Engr-In-Charge for the following: - (Make of cable : Finolex/Plaza/Havells/Rallison)

One light point controlled by one switch

Supply and fix switch modular type single pole one way 6 Amp complete all as specified and directed. Make : IndoAsian/L&T/ Legrand

Supply and fix ceiling rose, surface bakelite 65 x 50mm two to three terminals, ISI Marked, complete all as specified and directed.

Material and labour for exhaust fan with louver shutter 300mm sweep, 900RPM, heavy duty, AC, single phase, 230/240 volt including necessary connection with 3 core copper conductor cable of 2.50 sqmm from ceiling rose, cutting holes into brick wall and making good with cement mortar 1:4 or PCC 1:2:4 as directed and finished the surfaces as per existing specifications complete all as directed. Make : Bajaj/CG/Khaitan/Orient

Supplying, testing, installation of Active lightning arrestor of Class ‘A’ for building protection as per standard NFC 17-102 (2011). It shall work on Advanced Early Steamer Emission (ESE) principle and shall be made of Stainless Steel as per NFC 17-102 The system should be so designed to be capable of protecting against direct lightening point as well as conducting/diverting it to Earth completely after tracing the lightning in advance. The air terminal should be verified and tested from National/ International lab for more than 200 kA current discharge and Δt as per NFC-17 102. The system shall consist of: Early Streamer Emission Air Terminal with following features: • Stainless steel central capture head of 316L, also avoiding bolting and water infiltration that can cause premature corrosion. Test Certificate for protection against foreign solid substances and access to dangerous parts and test of protection againstwater • Control over release of ions positive or negative • Generation of streamer through coronaeffect • Maximum protection covering a radius 107 mtr.(approx.) • System should not depend on electrical energy. • Advance triggering test time of 60µs. • Tested for Short circui tcurrent 200kA or more@temperature(-)40°Cto(+)120°C. Note: Following test Certificates Shall be submitted at the time of supply (a) Advance triggering test time report as per NFC 17102 (b) Short circuit test report (200 kA or more) Make:- JMV/Alfredkim/Ashlock earthing systems

Supply and fixing GI Mast of 5 meter length and 40 mm diameter. and support hardware (cantilevered/ guyed type, as required at site) for suitable for mounting the ESE Lightning Arrester and aviation obstruction light equipment for a height of 5 mtrs (above the roof, as required at site). All accessories like clamps, bracket,guy kit, cable ties, base plate, adapters, nut bolts etc for mounting the lightening arrestor and obstruction light shall be complete all as directed.

Supply and fixing down Conductor & Holders to connect the Air terminal, to earthing system as per IS/IEC 62305-3 (i) Cable as per IS/IEC 62305-2 according to DIN EN 62561- 1, suitable for 200 KA of lightning current (ii) Material of conductor –Cu (iii) Material of Insulation –PE (iv) Material of Coating –PVC (v) Area of cross section - 50 sqmm (vi) The conductor shall be special High voltage insulated cable

M & L for Maintenance Free Earthing consisting of : (a) Copper bonded steel electrodes of 3.0m long, 17.2 mm dia. with copper bonding thickness of minimum 250 microns and UL listed and marked– 2Nos. (b) Earth Enhancement compound of approved brand supplied in sealed bags of min10 Kgs - 6Nos. (c) Copper busbar of 200 x 25 x 6 mm – 2Nos. (d) Copper strip of 25x3 mm to interconnect the earthing- 3mtrs. Make:- JMV/Alfredkim/Ashlock earthing systems

Supply and fix of Test Link Joints in IP 65 ABS Enclosure with transparent cover, Box size (180X180X138 mm), with all accessories complete. Copper test link size should be (150X25X3 mm complete all as specified and as directed by Engr-In-Charge.

Supply and fix LED aviation obstruction light RED colour with yellow base polycarbonate body complete all as specified and as directed by Engr-In-Charge.. Cat part no. BGAV 302 LED of Bajaj or equivalent in Make - C&S /Crompton/Philips.

Supply and fixing FR PVC insulated unsheathed flexible wire strandered copper conductor of size 1.5 sqmm three core 1100 volt house wire grade confirm to IS 694/1990 including making connection, IN REPLACEMENT' complete all as specified and as directed by Engr-In-Chage. Make :Plaza/Kalinga/Polycab/Finolex/Havells

Supplly and fix MCB, DB, Single Pole & Neutral, 4 way, sheet steel phospetised powder painted with 200 amps rated bus bar, 240 V, nautral link, earth bar and Din rail double door complete all as specified and as directed by Engr-In-Charge.. Make: ABB/ LEGEREND/Siemen

Supply and fix MCB, SP, 5-32Amps, 10KA, C Series complete all as specified and as directed by Engr-In-Charge. Make: ABB/ LEGEREND/Siemen

Supply and fix MCB, SPN, 40 Amps complete all as specified and as directed by Engr-In-Charge. Make: ABB/ LEGEREND/Siemen

Supply and fix collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed by Engr-In-Charge.

Supply and fix framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 including portions framed and hung as gates, including pintle hinges, stop, hand-made sliding bolts etc complete all as specified and as directed by Engr-In-Charge.

Material and labour for preparing new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamelled paint over one coat of red oxide primer complete all as specified and as directed by Engr-In-Charge.

Material and labour for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and the depth of embedded portion of holdfasts not exceeding half brick complete all as specified and as directed by Engr-In-Charge..

Supply and fix aluminium powder coated (minimum coating of powder coating 50 microns) frame work for doors, windows, ventilators, partition with one or more rebates incluidng joining cleats for fixing etc complete all as specified and as directed by Engr-In-Charge.. Make : Jindalco/Hindalco or equivalent . NOTE: The unit quoted rate includes the rate of aluminium accessories i.e. jointing cleats etc. or any other connected items and nothing extra shall be paid to contractor for the same.

Supply and fix aluminium powder coated (minimum coating of powder coating 50 microns) for door shutters of any size for sliding door, aluminium section weighing 0.55Kg/M including necessary joining cleats, glazing clips, rubber neoprene packing, EDPM gasket, anodized aluminium snap beading, screws for fixing tinted glass/composite panel sheet and etc complete all as specified. Make : Jindalco/Hindalco or equivalent . NOTE: The unit quoted rate includes the rate of aluminium accessories i.e. aluminum snap beading, screws, glazing clips, rubber neoprene packing, EDPM gasket, jointing cleats etc. or any other connected items and nothing extra shall be paid to contractor for the same.

Supply and fix float glass tinted, 5mm thick fixed in aluminium frame complete all as specified and as directed by Engr-In-Charge.. Make : Atul/Swastik/Saint Gobain/Modi Guard

Material and labour for aluminium composite panel sheet of colour and shade as approved by GE of 4mm thickness which consists of 3mm thick thermoplastic core of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick aluminium foils with outer surface finished with 30µ PVDF & inner surface finished with a thin ocatof polyester paint, cladding panel fixed to aluminium grid of size n.exc 2 Sqm, aluminium grid fixed to wall by flat iron clamp 25x6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, colour shade and pattern as approved by GE including all necessary frame work and complete all as specified and as directed by Engr-In-Charge.. Make: Armstrong/Alstom International Pvt Ltd

Supply and fix 200mm size aluminium powder coated (any tint) "American Handle" fixed to aluminium door with suitable screws complete all as specified and as directed by Engr-In-Charge.

Supply and fix 200mm size sluminium powder coated tower bolts of extruded section fixed to aluminium door with suitable screws complete all as specified and as directed by Engr-In-Charge.

Supply and fix mild steel Mortice lock vertical type 100mm size, 4 lever fixing in aluminium shutter complete all as specified and as directed by Engr-In-Charge.. Make : Godrej/Harrison or equivalent as approved by GE.

Surface excavation in soft/loose soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Excavation in post holes in soft/loose soil (or similar holes) each not exceeding 0.5cum, getting out and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed by Engr-In-Charge.

Material and labour for plain cement conrete type D2 (1:4:8) using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engr-In-Charge.

Supply and fix for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed by Engr-In-Charge.

Supply and fix for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290-0, Gde-E-165 (Brackets over 10kg each to be measured under `Structural Steel') complete all as specified and as directed by Engr-In-Charge..

Supply and fix corrugated high tensile 550 Mpa yield strength colour coated Galvalume steel sheet having maximum pitch of 250mm C/C and minimum 30mm crest depth in length as per site requirement .The fed material is to be manufactured out of 0.50mm (TCT) . Total coated thickness with 18-20 microns top coat over 5 micron primer and 8-10mm alkyd backer , Zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc (43.50%), aluminium (55%) & silicon (1.50%) with total mass coating of 150 gms/Sqm on both side . Width of indiviual sheet will be 1020mm and sheet length as per the site requirement .The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/ self tapping screws with EPDM seal, complete all as specified and directed by the Engr - In-Charge .Make:- M/S TATA BLUE SCOPE/LIOYD INSULATION/INTERARCH/CRILL COLOUR (ROOF) INDIA LTD/BHUSAN/ISPAT/JINDAL/JSW/ESSARR

Material and labour for broken stone or boulders hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and remmed to a true surface complete all as specified and as directed by Engr-In-Charge.

Material and labour for cement concrete type B-0 (1:2:4) using 12.50mm graded stone aggregate as in 50mm thick flooring, finished even and smooth without using extra cement complete all as specified and as directed by Engr-In-Charge.

Material and labour for 20-25mm thick machine cut kota stone slab flooring laid over and incluidng screed bed or bedding layer of 15mm thick in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-In-Charge..

Material and labour for plain cement conrete type B2 (1:2:4) using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engr-In-Charge..

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra cement) complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed by Engr-In-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-In-Charge.

Material and labour for RCC M-25 (Design Mix), using 20mm graded crushed stone aggregate as in foundation, including rafts, footings, foundation beams, Plinth beams, bases for columnns etc basement slabs, under reamed piles and mass concrete complete all as specified and as directed by Engr-In-Charge.

Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and as directed by Engr-In-Charge.

Supply and fix for High strength deformed bar TMT bars 10mm dia and over cut to length, bend to shape required incluidng cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-In-Charge..

Supply and fix for mild steel in flat, round or square bar in available lengths conforming to Fe-410-W Gde E-250 complete all as specified and as directed by Engr-In-Charge.

Supply and fix mild steel screws bolts machine made with hexagonal or square heads at one end and screwed the othe or screwed both ends each screwed ends, to be fitted with washers and one hexagonal or square nut etc complete all as specified and as directed by Engr-In-Charge.

M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint etc complete all as specified and as directed by Engineer-in-Charge. Make : Snowcem Bombay/Durocem/Decocem/Super Snowcem

HARISH SALES CORPORATION