Construction of Inspection Office and Rest House at Additional Spillway of Dantiwada Dam, Ta. Dantiwada, Dist. B.K.

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

Civil and Plumbing Work

1 Clearing and grubbing road land including 1250.00 Smt. 8.42

uprooting rank vegetation grass bushes,

shrubs, sapling and trees girth up to 300 mm

removal of stumps of trees cut earlier and

disposal of unserviceable materials (A) By

manual means in area of light jungle

2 Excavation for foundation upto 1.5 m depth 193.00 Cmt. 276.24

including sorting out and stacking of useful

materials and disposing off the excavated

stuff upto 50 Meter lead. (D) Soft rock not

requiring Blasting

3 Providing and laying cement concrete 1:2:4 7.00 Cmt. 3638.79

(1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

in (A) Foundation and Plinth

4 Providing and laying cement concrete 1:3:6 27.00 Cmt. 2978.97

(1-Cement : 3- coarse sand : 6- hand broken

stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork

in (A) Foundation and Plinth

5 Providing and laying cement concrete 1:4:8 6.00 Cmt. 2653.42

(1- Cement : 4- coarse sand : 8- hand

broken stone aggregates 40 mm nominal

size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

6 Providing, laying cement concrete M 250 11.00 Cmt. 4458.14

and curing complete including the cost of

form work (rates for centering, shuttering,

formwork staging scaffolding for considering

upto 4.50 mt. height) but excluding

reinforcement for reinforced concrete work

in: (A) Footing

7 Providing, laying cement concrete M 250 8.00 Cmt. 7812.35

and curing complete including the cost of

form work but excluding reinforcement for

reinforced concrete work in: Up to Plinth

Level. (C) Column

8 Providing, laying cement concrete M 250 6.00 Cmt. 7812.35

and curing complete including the cost of

form work but excluding reinforcement for

reinforced concrete work in: (C) Column (i)

Ground Floor

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

9 Providing, laying cement concrete M 250 1.00 Cmt. 7812.35

and curing complete including the cost of

form work but excluding reinforcement for

reinforced concrete work in: (C) Column (ii)

First Floor

10 Providing, laying cement concrete M 250 22.00 Cmt. 6301.39

and curing complete including the cost of

form work but excluding reinforcement for

reinforced concrete work in: (B) Plinth Beam

11 Providing & laying cement concrete M-250 8.00 Cmt. 6242.81

with curing etc. complete including the cost

of form work but excluding the cost of

reinforcement for R.C.C. work at Ground

Floor (D) Floor Beam

12 Providing & laying cement concrete M-250 2.00 Cmt. 7610.35

with curing etc. complete including the cost

of form work but excluding the cost of

reinforcement for R.C.C. work at Ground

Floor (E) Lintel

13 Providing, laying controlled cement concrete 1.00 Cmt. 6049.90

M 250 and curing complete including the

cost of form work (rates for centering,

shuttering, formwork staging scaffolding for

considering upto 4.50 mt.height ) but

excluding reinforcement for reinforced

concrete work in: (F) RCC Weathershed

14 Providing, laying controlled cement concrete 3.00 Cmt. 7794.17

M 250 and curing complete including the

cost of form work (rates for centering,

shuttering, formwork staging scaffolding for

considering upto 4.50 mt.height) but

excluding reinforcement for reinforced

concrete work in: (G) RCC Wall

15 Providing and Laying Cement Concrete M- 12.00 Cmt. 6565.00

250 and curing etc. Complete including the

cost of form work but excluding the cost of

reinforcement for R.C.C. work at Ground

Floor (H) For Slabs, Shelves

16 Providing TMT Bar FE 500D reinforcement 12270.00 Kg 77.28

for R.C.C. work including bending, binding

and placing in position complete upto floor

17 Filling available excavated earth (excluding 124.00 Cmt. 136.92

rock) in trenches. plinth, sides of foundations

etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by

ramming and watering.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

18 Filling in foundation and plinth with murrum 55.00 Cmt. 282.07

including watering, ramming and

consolidating etc. complete.

19 Filling in foundation and plinth with brick Bats 2.00 Cmt. 621.46

Chhara in layers of 20cm. Thickness

including watering, remming and

consolidating etc. complete.

20 Filling in plinth with sand under floors 13.00 Cmt. 444.75

including watering ramming, consolidating

and dressing complete

21 Brick work using common burnt clay building 16.00 Cmt. 4214.33

bricks having crushing strength not less than

35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 fine sand)

(B) Conventional

22 Brick work using common burnt clay building 51.00 Cmt. 4496.05

bricks having crushing strength not less than

35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (Cement : 6 -fine sand)

above Plinth upto floor two level (B)

Conventional

23 Half brick masonry in common brunt clay 44.00 Smt. 673.22

building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar

1:5 (1- Cement : 5 -coarse sand ) above

plinth upto floor two level (B) Conventional

24 Providing 10mm thick cement plaster in 104.00 Smt. 151.18

single coat on brick/concrete walls for

interior plastering upto floor two level and

finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand)

25 Providing 15mm thick cement plaster in 322.00 Smt. 242.87

double coat on Rough (Similar) side of single

or half brick walls for interior plastering upto

floor two level and finished even and smooth

in (ii) Cement mortar 1:4 (1-cement :4-sand)

26 Providing 20 mm thick double coat mala 350.00 Smt. 283.95

cement plaster on interior brick / concrete

work for plastering comprising of base coat

of 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement

mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding

curing etc. complete.

27 Providing throating or plaster drip and 45.00 Rmt. 43.05

moulding to R.C.C. Chhajja.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

28 Providing cement vata (10cm. x 10 cm. size) 100.00 Rmt. 24.28

quarter round in cement mortar 1:1 including

neat cement finishing, watering etc.

29 Providing 20 mm thick water proof cement 32.00 Smt. 269.67

plaster using water proofing powder

1Kg/1bag of cement for all floors on brick /

concrete wall work using water proofing

materials in C M 1: 4 ( 1 cement 4 coasrse

sand) including finishing with a flooting coat

of neat cement slurry etc complete for all

floor. and shall be guaranteed for minimum

period of 10 years after handing over the

completed building by the main contractor to

be finished as directed. Stamp paper

guarantee 10 years to be furnished before

receiving any payment from the client.

30 Carring out plinth treatment to post 125.00 Smt. 86.86

construction / existing structure by spraying

chemical solution for termite control

treatment including labour and material

consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one

percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is recommended

as per I.S

31 P & L 24" x 24" vitrified 8 mm thick tile 39.00 Smt. 1467.72

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing

flooring by adhesive material including

dismentaling of existing flooring and jointed

with color cement slurry including finised with

flush pointing & cleaning the surface etc.

32 Providing and laying Granite slab flooring 6.00 Smt. 5228.77

over 20mm (average) base of cement mortar

1:6 (1-cement : 6 coarse sand) or L.M.

1:1.5(1- lime putty : 1.5 - coarse sand) laid

and jointed with gray cement slurry including

rubbing and polishing complete. (A) Granite

slab 20 to 25 mm thick

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

33 Providing and laying polished Kota stone 11.00 Smt. 1067.31

slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 laid over and

jointed with grey cement slurry including

rubbing and polishing etc. complete. (B)

34 Providing and laying Vitrified tiles 8 to 10 7.00 Smt. 1592.40

mm thick , in skrting risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-cement

: 3-coarse sand) and jointed with white

cement slurry

35 Providing and laying coloured glazed tiles of 34.00 Smt. 1488.24

the size 300 mm x 200 mm x 8 mm /

mm x 450 mm x 8 mm in skirting, risers of

steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

36 Providing and laying cement concrete 152.00 Smt. 349.10

flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size)

laid in one layer and finished with a floating

coat of neat cement with waterproofing

material. (B) 50mm thick.

37 Providing and laying broken chine mosaic 108.00 Smt. 779.70

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including

rounding off junctions and extending them

upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

38 Providing and laying rough chiseled dressed 20.00 Smt. 643.57

stone flooring over 20mm thick base of

cement mortar 1:5 (1-Cement : 5-coarse

sand) or L.M. 1:1.5 including pointing with

cement mortar 1:2 (1-cement : 2-stone dust)

etc. complete. (B) 40mm thick

39 Providing and fixing pre-cast Rubber Dye / 260.00 Smt. 701.90

steel Dye inter locking concrete block 60 mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

per approved design Confirming to IS

: 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in

proper line and level as per guidlines of IRC

: SP 63-2018 etc. Complete.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

40 Providing and fixing pre-cast concrete kerb 100.00 Rmt. 402.55

stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of

M200 grade concret as per approved design

and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

41 Providing and laying precast cement 21.00 Smt. 517.79

concrete tiles 20mm thick with aggregate of

sizes upto 6mm laid on floors, treads of

steps and landing on 20mm thick bed of

cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1:1.5 (1 - Lime putty : 1.5 -

coarse sand) jointed with neat cement slurry

with pigment to match the shade of tiles

complete with precast tiles of using ordinary

42 Providing and laying 16-18 mm thick 45.00 Smt. 3228.97

polished granite stone machine cut in single

piece (Max. available) in sill and jambs of

door ,window,ventilation & lift wall

cladding,staircase flooring landing, risers &

treads, skirting laid over 10 mm thick

cement mortar 1 : 3 (1 cement : 3 coarse

sand) and jointed with grey cement slurry

with matching pigment incl. rubbing and

polishing,half rounding edge and incl. fixing

of hilty fastener at every 1/3 span of sill as

required size etc. complete colour and shed

as approved by architect engineer in charge.

43 Providing, fixing and construction of sand 1.00 Smt. 5814.57

witch type platform of 18 mm thick Granite

polished stone top, 100 mm wide edge full

moulded Facia Patti with 25mm thick

prepolished Kota stone of uniform size and

colour for bottom & supports at 90cm

interval including necessary cement mortar

1:2 Kota shall be fixed in cement joints and

pointing as specified in Kitchen / Pantry /

Counter / Laboratory etc with necessary

making of edges, polishing curing daily

mopping with water and kerosene etc comp

as directed of Engineer-in-charge.

(Measured only vision finished top plan area)

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

44 Providing and fixing 35 mm thick panelled, 12.00 Smt. 3627.43

glazed or panelled and glazed shutters, for

Doors windows and clearstory windows

including black enamelled M.S. But hinges

with necessary screws. (A) Plywood sheet

panels with 1 mm laminate sheet

45 Providing and fixing FRP frame size 125 x 4.00 Smt. 2615.04

65 mm and 35mm thick FRP shutter having

extra reinforcement on sides & edges in

polish finish. The core of the shutter & frame

is to be filed up with injected polyurethene

foam done in situ alongwith embedded

wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame &

shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with

necessary screws & alluminium S.S fixtures

& fastenings & fastener sleeve.

46 DOMAL SERIES WINDOW : Providing & 16.00 Smt. 9595.00

Fixing Three Track Domal Window having

Extruded aluminium Colour anodized Sliding

Section outer frame size 80 mm X 45 mm

Weight 1.555 kg/m and Shutter frame

mm X 65 mm Weight 0.851 kg/m and

Section inner patti Size 38.70 mm X

mm Weight 0.303 kg/m with 5 mm Clear

Glass including EPDM Gasket, Woolen In

Shutter, Multiple Lock, Anti Rattling Guide,

Lock Guide, handle Anti lifting, Shutter

Corner Clit, Shutterwing Connecter, Interlock

EPDM Gasket, Interlock Guide, Anti

Capillary Pad, Bush Bottom silicon all side &

All Necessary Hardware etc. complete as

per detailed drawings including all accesible

accesories Complete etc as per Instruction

of the EIC/Architect.

47 Providing and fixing standared extruded of 2.00 Smt. 1175.56

alluminium section of size 63mm x 38.10mm

x 1.2mm @ Wt. 0.643 Kg/mt with colour

anodized alluminium frame for ventilation

with 5 mm thick frosted glass as details etc

complete for Ventilation

48 Providing and fixing M.S. grills of required 464.00 Kg 106.23

pattern to wooden frames of windows etc.

with M.S. flats at required spacings and

frame alround, square or round bars with

round headed bolts and nuts or by screws

(A) Plain Grill.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

49 Pro. And fixing single layer water proof 43.00 Smt. 606.95

gypsum board 12.5 mm thick sections using

water proof board of size 1220 mm x

mm x 8.0 mm suspended by GI suspender

channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x

mm x 0.8 mm at 1220 mm center to center

ceiling section of size 40 mm x 35 mm x

0.55 mm at 457 mm c/c and perimeter

channel A of size 20 mm x 27 mm x 30 mm

x 0.5 mm at edges & drops incl.paper tap

sand sofit cleat, anchor fastener, scoch bolt

connecting cleat,joining compound top coat

on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail

drawing as directed

50 Applying two coats of putty & two coats of 392.00 Smt. 40.59

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other foreign

matter and sand papered smooth.

51 Wall painting (two coats) with plastic 351.00 Smt. 83.18

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

52 Providing and applying Synthetic Texture 350.00 Smt. 757.50

Plaster above exterior plaster : Providing 2-3

mm thick synthetic texture plaster of

approved texture pattern (Material Shall be

Used as Approved Only Asian brand)

including cost of all materials, labour,

conveyance, loading and unloading,

royalties, scaffolding, watering etc. complete

upto any Height as per Drawing and

instructions of Engineer -in -Charge.

53 Finishing wall with Weather proof exterior 350.00 Smt. 37.37

primer befor applaying paint on wall surface

(two coats) to give an required shape even

shade after thoroughly brushing the surface

to remove all dirt, and remains of loose

powdered materials. etc complete.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

54 Finishing wall with weather proof exterior 350.00 Smt. 73.83

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove

all dirt, and remains of loose powdered

materials.etc complete

55 Painting two coats including priming coat on 16.00 Smt. 128.13

new steel and other metal surface with

enamel paint, brushing, interior to give an

even shade including cleaning the surface

an even shade including cleanicn the

surface of all dirt, dust and other foreign

56 Providing and fixing PVC printed false ceiling 40.00 Smt. 911.02

with flush type with alluminium frame, frame

work is done with three different sections of

G.I. sheet of 24 gauge thickness named as

C, U and L. The C section is fixed with

hangers at an equal distance of 36” each

and then U section is fixed perpendicular on

C section with steel screws at and equal

distance of 16” each. The complete frame

work is supported by G.I. L angle/6 mm rod

hangers from the roof and L sections is fixed

all around the wall as shown in the diagram.

5mm PVC sheet strips of size 2 wide are fixd

with counter sunk steel screws on the U

section. Further 3mm PVC sheet is stuck to

these PVC strips with solvent cement such

that joining lines are perfectly matched. P.U.

putty is filled, dried and leveled and requisite

coats of primer and paint is done on the

ceiling for getting fine surface finish etc.

complete as per direction of Engineering and

charge manufacturer’s specification and

57 Providing & fixing Steel work welded, in built 625.00 Kg. 125.24

up sections framed work including cutting,

hoisting, fixing in position and with one coat

primer & two coat oil paint as per detail

drawings etc. complete. in columns, beams

and joists, channels M.S. flat, Angles, Pipes,

tees flats with connecting plates or angle

cleats STRUCTURAL STEEL

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

58 Providing corrugated G.I. sheet of class-3 30.00 Smt. 734.19

roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with

bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete

excluding the cost of purlins, Rafters and

Trusses. (1) 0.80 mm thick sheet.

59 Fabricating, supplying and fixing in position 15.00 Rmt. 4387.44

SS railing for staircase and balcony with

brush finish and 304 grade as per Indian

Standrd and detailed drawing including

grinding, cleaning and filling the welded

spots with SS railing (Only Length will be

paid for payment heigth max.1.0 mt.). The

Work to be executed as per consultant

60 Providing and fixing concealed center point 5.00 Rmt. 170.36

to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation

(NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete. [A] 15 mm.

61 Providing laying and jointing in true line and 20.00 Rmt. 72.65

level 15mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including

cost of all materials.

62 Providing and fixing concealed center point 8.00 Rmt. 253.82

to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation

(NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete. [C] 25 mm.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

63 Providing laying and jointing in true line and 16.00 Rmt. 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including

cost of all materials.

64 Providing laying and jointing in true line and 12.00 Rmt. 148.12

level 40mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including

cost of all materials.

65 Providing laying and jointing in true line and 10.00 Rmt. 195.67

level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including

cost of all materials.

66 Providing and fixing wash down wall hung 1.00 Each 27019.52

water closet (European type) of Cera or

equivalent with integral 'P' trap jointed within

C.I pipe in C:M 1:1 including matching seat

cover, chair braket, Conceled dual flush

valve of Cera or equivalent, 2 way bibcock of

jaquar or equivalent, health foucet of Cera or

equivalent with 1 m extension pipe, toilet

paper holder of Cera or equivalent with all

accessories etc. complete.

67 Providing and fixing wash down Orissa Pan 1.00 Each 8258.77

water closet (Indian type) of Cera or

equivalent with integral 'P' trap jointed within

C.I pipe in C:M 1:1 including Conceled flush

cock of Cera or equivalent, bibcock of Cera

or equivalent with all accessories etc.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

68 Providing and fixing urinals of Cera or 1.00 Each 26935.69

equivalent with integral drain pipe jointed

within C.I pipe in C:M 1:1, including

Conceled flush cock of Cera or equivalent,

Angle Cock of Cera or equivalent and Urinal

speader of Cera or equivalent, all

accessories etc. complete.

69 Providing and fixing Bib Tapes of Cera or 1.00 Each 34163.25

equivalent with including Shower and

Shower Cock of Cera or equivalent, Soap

dish holder and Liquid soap dispenser of

Cera or equivalent, Tumbler holder of Cera

or equivalent and Towel rack of Cera or

equivalent, with all accessories etc.

70 Providing and fixing Bib tapes of Cera or 1.00 Each 13542.08

equivalent with including Shower and

Shower Cock of Cera or equivalent, Soap

dish holder of Cera or equivalent and Towel

rack of Cera or equivalent, with all

accessories etc. complete.

71 Providing and fixing table top wash basin on 1.00 Each 33672.39

18 mm thick polished granite for top with

Nos. of C.I. Heavy brecket with 1 Nos. of

wash basin Cera brand or equivalent, C.P.

brass Cera pillar cock or equivalent, angle

valve Cera or equivalent, C.P. brass

extension nipple 50 mm long and full thread

waste coupling and bottle trap of Cera or

equivalent including mirror with frame for

wash basin etc. complete.

72 Providing and fixing Wall hung wash basin 1.00 Each 12753.27

with full pedestal of Cera brand or

equivalent, C.P. brass Cera pillar cock or

equivalent, angle valve Cera or equivalent

and full thread waste coupling including

mirror for wash basin etc. complete.

73 Providing and fixing stop cock of Cera brand 2.00 Each 2892.64

or equivalent, for water supply controlling

etc. complete.

74 Providing and fixing PVC SWR Nahni trap IS 6.00 Each 733.26

14735 for drain - 100 mm diameter with jali

of the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

75 Providing and fixing S.W. gully trap with C.I. 3.00 Each 1292.19

grating brick masonry chamber and water

tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight.(i)

Square mouth traps. (A) 100mm x 100mm

size P type.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

76 Providing and fixing ball cock of approved. 2.00 Each 137.89

quality as directed. (B) Abonite (ii) 50mm

77 Providing and fixing Gun metal check or non- 1.00 Each 663.43

return fullway wheel valve. (E) 40mm dia.

78 Providing and fixing Gun metal check or non- 2.00 Each 420.63

return fullway wheel valve. (C) 25 mm dia.

79 Providing, laying and jointing in true line and 10.00 Rmt. 1053.73

level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh

at every 2000 mm center to center or shall

be concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

80 Providing, laying and jointing in true line and 5.00 Rmt. 834.38

level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh

at every 2000 mm center to center or shall

be concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement

including cost of all materials.

81 Supplying and fixing reinforced concrete 15.00 Rmt. 675.36

heavy duty non-pressure pipes with collars

for culverts including setting and joining the

pipes in C.M. 1:2 watering and laying (to

level or slope) of I.S. class NP2 of following

internal diameters. (i) 300mm dia.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

82 Constructing Brick masonry road gully 5.00 Each 2017.19

chamber 500mm x 450mm x 600mm

including 500mm x 450mm C.I. horizontal

grating wih frame complete.

83 Constructing brick masonry chamber for 2.00 Each 7180.44

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed

concrete etc. complete.(iii) Inside

dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

84 Providing, laying and fixing 200 mm wide 20.00 Each 414.10

PVC water stop of approved make and

grade thickness in concrete work for water

tightstructures like retaining walls of pound

water body and underground water tank

including cleaning and placing in line level

etc. complete, as directed.

85 Providing and fixing cast iron steps of size 3.00 Each 207.66

500 mm x 150 mm x 22.5 mm and painting

with two coats of Anti-corrosive paint etc.

86 Providing and fixing C.I. Manhole cover 0.60 8.00 Each 958.17

M x 0.45M size having weight not less than

87 Providing and fixing in position cowel went to 2.00 Each 505.17

pipes. (C) 100mm dia

88 Providing sock pit of 5.00 Cu.M. Volume 3.00 Each 3334.32

including excavating and filling brickbats with

dry masonry work at top for 45cm. height

including covering the top with stone

including providing vatas in C.M. 1:3 with

finishing curing etc. complete as directed.

89 Providing and fixing to wall ceiling and floor 25.00 Rmt. 280.23

10.0 Kg. F/Cm2 working pressure polythene

pipes of the following outside Dia. Low

densidy, complete with special falnge

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor. (F) 75mm

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

90 Providing erecting and fixing double coated 1000.00 Litre 3.95

ISI water tank of required capacity each with

all necessary fittings and connection etc.

complete on terrace

(Out side earth) in layers including watering

ramming , rolling with 8 to 10 Tone Roller,

compacting and consolidating with any lead

& lift as directed by EIC etc. complete.

92 Providing pure doob (dharo) grass 100.00 Smt. 121.20

including watering and maintenance of the

lawn for 1 year or more till the grass forms a

thick lawn, free from weeds and fit for

mowing including supplying farm clay up

mm thick, sludge, manure, pesticides, extra

earth, disposal of rubbish, trench excavation

and all labour with lead and lift etc. complete

as directed by EIC.

93 Providing & construction Tree plants 50.00 Nos. 293.91

required Digging of pits 0.6mt. x 0.6mt x

0.6mt, filling with goodearth with mixing of

cow dong and pesticide. Planting the

following plant of 4' to 6' height stack it well,

maintain it for 3 month name of plants

Neem, Nagor, Avonla, Aritha, Garmala etc.

94 Planting of Ornamental shurbs Digging of 39.00 Nos. 301.99

pits 0.6mt. x 0.6mt x 0.6mt, filling with good

earth with mixing of cow dong and

pesticide.planting the following plant of 4' to

10' height stack it well, maintain it for

month Golden bamboo, Green bamboo,

Ficus spp.Ixora spp., Hibiscus spp.,

Allamanda spp., Bougainvella spp., Nerium

spp., Plumeria spp. etc.

95 Planting of exoitic trees Digging of pits 18.00 Nos. 1602.87

0.6mt. x 0.6mt x 0.6mt, filling with good earth

with mixing of cow dong and

pesticide.planting the following plant of 8' to

10' height stack it well, maintain it for 1 year

as per instruction of Engineer-in-charge.

Furnishing Work

96 Wall Panelling & Wooden Partition 50.00 Smt. 3581.89

Providing and fixing 40mm panelled, Glazed

or panelled and glazed partitions fixed to

frames with iron scews etc. complete with

indian teak wood

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

97 Queen Size Bed 1.00 Each 27270.00

Providing and making Queen Size Bed size

(2200 X 2100 X 400) mm made out of

mm thk IS303 COMMERCIAL PLY with all

vertical/horizontal external/exposed surfaces

to be finished with 1mm thick laminate finish

of approved make and shade.8mm PLY and

wooden sport use inner side of haderest and

make NOTCH in ply as per detail drawing.

provide 38mmX75mm vertical and horizontal

support and 75mmX75mm LEG make out of

C.P teak wood as per drawing detail.All the

lipping mouldings as per the detial shall be

finished with bidding patti and melamine

polish. The master bed base shall have

plastics buffers. All PLY shall be fixed with

proper architectural joinery and with required

full thread sheet metal CSK head screws.All

suppliying ,making and assembaling bed as

per detail design ,shape as showing in drg

no ( SBLC-IN-01-2.24 ), over all briefing as

above.the rate are including with all

material,labour,wastage and complete as

directed by EIC(inside surface finised by

mm balancing laminat).

98 Bed Side Table : 2.00 Each 4848.00

Providing and making bed side table Depth -

600 mm Width - 450.0 mm Height -

Material : Body and drawer panels of Bed

side table are made of 18 mm thick

Prelaminated Particle Board. All the exposed

edges are edge banded with 0.8 mm thick

PVC edge banding. Side panels are made of

18 mm thick Prelaminated Particle board

with imported H.D.F. foil wrapped decorative

trim fixed on to it. Hardware : The high

quality hardware used like Roller slides,

Hinges , minifix, dowels is of make Hettich..

Construction : Knock Down construction.

Packets : 1 packet. Finish :. 18 mm thick

Prelaminated Particle Board is in Walnut

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

99 Vanity Counter with Mirror Dressing 1.00 Each 11110.00

Providing and making vanity counter with

mirror dressing table Depth - 450.0 mm,

Width - 440.0 mm, Height - 1710.0 mm

Panels of Dressing table are made of 18 mm

thick Prelaminated Particle Board .All the

exposed edges are edge banded with

mm thick PVC edge banding. Side panels

are made of 18 mm thick Prelaminated

Particle board with imported H.D.F. foil

wrapped decorative trims fixed on to it.

Mirror panel is made of 18 mm thick particle

board with 4 mm thick mirror fixed on to it..

Supporting pipe used for fixing the mirror

frame is made of M.S. 25 mm square pipe of

thickness 1.2 mm. The high quality hardware

used like Roller slides, Hinges , minifix,

dowels is of make Hettich.. 18 mm thick

Prelaminated Particle Board is in Walnut

shade. Metal pipe is powder coated in shade

Metallic Silver Grey to thickness of

microns(+-10). With Knock Down

Construction

100 Wardrobe 2.00 Each 34845.00

Providing and constructing Wardrobe size of

(2100X1500X600)mm Made out of 19 mm

thk IS 303 COMMERCIAL PLY with all

vertical/horizontal external/exposed surfaces

to be finished with 1mm thick laminate finish

of approved make and shade and out

side/internal side of shuter use 18mm thk

PLY with 1mm laminate finish of approved

shade. All internal surface shall in 0.8 mm

thk laminate and 5mm miror fixing on front

of ward robe as per drawing. All the lipping

mouldings as per the detail shall be finished

with bidding patti and melamine polish.The

ward robe base shall have plastics buffers.

All PLY shall be fixed with proper

architectural joinery and with required full

thread sheet metal CSK head

screws.Hardware : The high quality

hardware used like Roller slides,... SS pipe,

Hinges , minifix, wooden dowels is of make

Hettich.. Lock used for main door is 3 way

lock and lock used for drawer is cam lock

Construction..All suppliying ,making and

assembaling wardrobe as per detail design

,shape as showing in drg no ( SBLC-IN-01-

2.22 ), over all briefing as above.the rate are

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

101 Doble Bed Mattresh 1.00 Each 8181.00

Providing and supplying Bed mattresh (2200

X 2100 X 400) mm size as per site

mesuremant. Use 40 density 'U' foam.

102 Bed sheet for double bed 1.00 Each 2248.26

Providing and supplying double bed sheet.

103 Pillows 4.00 Each 757.50

Supplying and Laying Featherlite pillow of

medium size 18" x 27" as per the instruction

and As per approved by Architect and

approved by Engineer In-charge.

104 Woolen Blanket 1.00 Each 2439.15

Supplying and Laying Woolen Blanket

double bed of size 90" x 90" as per the

instruction and As per approved by Architect

and approved by Engineer In-charge.

105 Three Seater Sofa 2.00 Each 23159.30

Providing and supplying the sofa will be total

prepared in 18mm plywood. Then Z-Section

spring use and on top 4''0' rubber cushion

and top 25mm thick and 32 density U-Foam

sample. The back support fitted with 2''0'

rubber cushion with 25mm U-Foam with

density appropriate 3''angle support.All

finished with cloth fabric of basic cost Rs.

Engineer-in-charge. Handle and footing

support shall be finished in Teak wood with

melamine finished as shown in drawing. The

rate shall be Including all materials and

labour etc. complete as per detail drawing

and instruction of Engineer-in-charge.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

106 Two Seater Sofa 2.00 Each 18582.99

Providing and supplying the sofa will be total

prepared in 18mm plywood. Then Z-Section

spring use and on top 4''.0' rubber cushion

and top 25mm thick and 32 density U-Foam

sample.The back support fitted with 2''0'

rubber cushion with 25mm U-Foam with

density appropriate 3''angle support. All

finished with cloth fabric of basic cost Rs.

engineer-in-charge. Handle and footing

support shall be finished in Teak wood with

melamine finished as shown in drawing.The

rate shall be Including all materials and

labour etc. complete as per detail drawing

and instruction of Engineer-in-charge.

107 Tipoi 3.00 Each 11613.99

Providing and fixing 12mm thick designer

glass top supported with SS stud with 18mm

thick plywood frame strucutre (shown in

detail drawing) with 1.0mm thick approved

laminate finish with nylon buffers and

including all materials and labour etc.

complete as per detail drawing and

instruction of engineer-in-charge and

consultant.

108 Pelmet 11.00 Rmt. 221.55

Providing and fixing 12 mm thick and

100mm wide pelmet of flat pressed 3 layer

neneed particle board solid core with 25 mm

diametre alluminium curtain Road and

brackets including fixing with 25mm x 3mm

M.S. flat 10cm, long and plugs etc.

109 Curtain Rods 8.00 Rmt. 959.50

Providing and fixing Rooms Window curtain

with Curtian Stainles Steel rod and Middle

Suppoet and Bracket with best quality and

approved brand necessary etc comp. or as

110 Curtain 13.00 Smt. 1212.00

Providing and fixing I - let style cloth curtain

using approved good quality of cloth in light

& dark matching colour combination for

curtain back linning with ring patta colour

matching and using with all req. hardware,

materilas, including cutting & stitching etc

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

111 Roller Blind Zebra Cut 8.00 Smt. 2220.99

Providing & Fixing Manual Roller Blinds fixed

on window, The brake mechanism is

designed not to break if attempts are made

to lower the blind by pulling on the bottom

rail, the maximum lifting capacity of the

brake mechanism is 5 kg. Used together

with a Ø36 aluminum tube. The end plug is

locked into the mounting bracket for secure

fastening. The mounted bracket is made of

1.5mm. Galvanized steel power coated in

white, distance of the bracket is 36mm from

wall to centre. Bottom bar is made out of

aluminum powder coated in white, the end

cap on each side will match the colour of

bottom bar, and this shape of bottom bar

has been chosen by Consultant who liked its

esthetical appearance. The cover profile,

finished with covers, covers up the roller

tube and its fabrics. Cover should be made

out of aluminum and is power coated in

white. Fabric should be used as per

112 Contemporary Chairs 2.00 Each 7575.00

Providing & supplying Chair with teak wood

frame and laminated plywood top of 18mm

plywood & PU with designed fabric, as per

design. Wooden edges/surfaces to be

finished in stained melamine polish.

Minimum size of Chair - with necessary

hardware as per design.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

113 Steel Coat 1.00 Each 8080.00

Size: 6’0” x 3’0” x 1’3”

The frame structure must be of MS CRCA

Tube of 50mm x 50mm x 1.6 mm thick.

Welded as per IS and black powder coated.

Three cross support of CRCA MS Pipe 50 x

25 x 1.6mm thick as tie member and 20mm

x 20mm x 1.6mmm thick at equal distance in

cross wise must be provided. Top should be

of 18 ± 1 mm thick Laminated MDF Board.

Legs has to have cross support. On each leg

there must be a provision for fixing a

mosquito protection net bar. Three side of

bed should be covered with 150mm x 18mm

thick Pre laminated MDF board edge with

2mm thick PVC edge bend. Head board

made from 18mm thick Post form laminated

MDF board with 2mm thick PVC edge bend

etc. as per detail drawing and instruction of

engineer-in charge and consultant

114 Bed Mattress for Single Bed : 1.00 Each 4848.00

Providing Bed Mattress for Single Bed Size

72 x 36 with Sandwitch construction round

corners, hitlon thickness 60mm and hitlon

density 23 GM/dcm cube. Coir both side

thickness 20mm, density 70 GM/dcm cube.,

Quilting combination layer with pilled foam

quilting one side with thickness of 14mm

pilled foam density 18GM/dcm cube. PU

foam/EPE sheet side walling thickness

3mm , total thcikness of mattress to be

114mm with Fabric 85 GSM, fabric poly

cotton with Maroon with Pearl gold print

115 Bed sheet for Single bed 1.00 Each 1111.00

Providing and supplying single bed sheet.

116 Woolen Blanket for Servant Room 1.00 Each 1515.00

Supplying and Laying Woolen Blanket single

bed of size 36" x 90" as per the instruction

and As per approved by Architect and

approved by Engineer In-charge.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

117 Office Table : 1.00 Each 25250.00

Providing and fixing 38mm thick plywood top

with laminate finish witn in approved shade

with telescopic suspended metal keyboard

with mouse tray with 57mm vertical legs

made by plywood with laminate finish with.

The Appron should be made from plywood

with laminate finish wih as per detail

drawing, Drawer unit box

(410MMx430MMx650MM) with wooden

bidding patti on nylon castor with lock and

telescopic channel should be made from

18mm plywood with laminate outside 1.0mm

and 0.8mm inside laminate finish.The

shutter out side shall be laminate finish and

0.8mm inside laminate finish with Auto

hinges and drawer should made from 18mm

plywood with laminate finish in approved

shade and CPU Trolley should be supplied

of metal powder coated, Footrest (100x75

mm) should be from teakwood with

melamine polish finish in approved shade.

The table shall have 12mm thick back

painted designer glass top as per design.

Including all materials and labour etc.

complete as per detail drawing and

instruction of Engineer-in-charge.

118 Medium Back Chair 1.00 Each 13068.39

Providing and supplying the Medium Back

Chair revolving based on synchro tilting

mechanism with gas lift for adjustable height

and medium curved back with seat and back

PU molded cushion with MS pipe frame

structure and while foam layer for seat and

molded PU foam. White foam layer for back

covered with thick cloth and draped with

cloth of an approved shade. (min. of Rs.150/-

per mtr.). 5 legged revolving molded nylon

chair based with good quality of PU castors.

The chair to have wide polyurethane arm

rest of the approved shape. Complete chair

should be in suitable shape. Rates to be

inclusive of all taxes and free delivery on

approved by engineer-in-charge and

consultant.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

119 Low Back Chair 3.00 Each 9937.39

Providing and supplying the Low Back Chair

revolving based on synchro tilting

mechanism with gas lift for adjustable height

and medium curved back with seat and back

PU molded cushion with MS pipe frame

structure and while foam layer for seat and

molded PU foam. White foam layer for back

covered with thick cloth and draped with

cloth of an approved shade. (min. of Rs.150/-

per mtr.). 5 legged revolving molded nylon

chair based with good quality of PU castors.

The chair to have wide polyurethane arm

rest of the approved shape. Complete chair

should be in suitable shape. Rates to be

inclusive of all taxes and free delivery on

approved by engineer-in-charge and

consultant.

Electrical Works

120 Point wiring for Light / Bell with 2-1.5 20.00 Each 449.45

sq.mm & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in

following type of pipe to be erected

concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell

push & accessories and earth continuity of

following type, erected on PVC / Metallic

box, single mounting base frame covered

with textured/metallic front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.`

(a) with medium class Rigid PVC pipe and

accessories Cat-III

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

121 Point wiring for FAN with 2-1.5 sq.mm & 6.00 pt. 638.32

earthwire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC

insulated multistrand copper wires, in

following type of pipe to be erected

concealed in / flushed on wall/ceiling

complete with 6A Modular type switch and

hum free EME four or more step type

electronic fan regulator with separately

mounted and accessories with earth

continuity of following type erected on PVC /

Metallic box, single mounting base frame

covered with textured/metallic front plate

modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose /

H.D.Connector as directed.(a) with medium

class Rigid PVC pipe and accessories.Cat.

122 Point wiring for Individual Plug with & 5.00 Pt. 475.71

earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in

following type of to be erected concealed in /

on surface of wall / ceiling complete with

Modular type switch & 5 pin Plug erected on

PVC / Metallic box covered with appropriate

front plate modules erected on / in wall /

ceiling as per pipe erected with following

type of accessories. [I] For 6A Plug with 2-

1.5 sq.mm Cu. Wire. (a) with medium class

Rigid PVC pipe and accessories. Cat. III

123 Point wiring for Individual Plug with & 5.00 Pt. 837.29

earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in

following type of to be erected concealed in /

on surface of wall / ceiling complete with

Modular type switch & 5 pin Plug erected on

PVC / Metallic box covered with appropriate

front plate modules erected on / in wall /

ceiling as per pipe erected with following

type of accessories. [III] For 16A Plug with 2-

4 sq.mm Cu. Wire(a) with medium class

Rigid PVC pipe and accessories. Cat. III

Point wiring for Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic box, single mounting base frame

covered with textured / metallic front plate

modules erected on / in wall / ceiling with

following type accessoriesCat. III

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

125 Point wiring for Two Way Controlled Light 5.00 Pt. 567.62

Point with 2-1.5 sq.mm & earthwire of

sq.mm (green) both are of .ISI marked

KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling

,complete with 6A Modular type switches

and following type of accessories erected on

PVC / Metallic box, single mounting base

frame covered with textured / metallic front

plate modules erected on / in wall / ceiling as

per pipe erected. with necessary

batten/angle holder or ceiling rose or

H.D.Connector as directed.(a) with medium

class Rigid PVC pipe and accessories.Cat.

Providing following type of Modular Type

Accessories mounted with pvc / metallic box,

single mounting base frame covered with

textured / metallic front plate , modules

erected with necessary connection. As

desired by Engineer In charge

(3) Two Pin/RJ-11 Telephone Socket[A] For

One Gang Cat.III

Providing following type of Modular Type

Accessories mounted with pvc / metallic box,

single mounting base frame covered with

textured / metallic front plate , modules

erected with necessary connection. As

desired by Engineer In charge

(5) Electronic hum Free four or more steps

EME Fan regulator Cat.III

Providing following type of Modular Type

Accessories mounted with pvc / metallic box,

single mounting base frame covered with

textured / metallic front plate , modules

erected with necessary connection. As

desired by Engineer In charge

(7) Blank Plate Single Cat.III

Providing following type of Modular Type

Accessories mounted with pvc / metallic box,

single mounting base frame covered with

textured / metallic front plate , modules

erected with necessary connection. As

desired by Engineer In charge

(8) Modem Jack for Computer Open RJ-45

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

Providing following type of Modular Type

Accessories mounted with pvc / metallic box,

single mounting base frame covered with

textured / metallic front plate , modules

erected with necessary connection. As

desired by Engineer In charge (10)

6/16Amp. Universal socket Cat.III

Providing following type of Modular Type

Accessories mounted with pvc / metallic box,

single mounting base frame covered with

textured / metallic front plate , modules

erected with necessary connection. As

desired by Engineer In charge (12) 6Amp. /

16 Amp. Two Way switch Cat.III

(19) Modular Indicating Call Bell Cat.III -

Instructument to be provided and executed.

132 (20) Modular Buzzer Cat.III- -Instructument 2.00 EA 167.66

to be provided and executed.

Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour

for earth continuity of following size (a) with

medium class Rigid PVC pipe and

accessories (d) 3 wire 2.5 sq. mm (for

lighting SB circuit mains)

134 Mains with 1.1 KV grade FRLS PVC 25.00 Mtr. 124.23

insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size (a) with medium

class Rigid PVC pipe and accessories (a)

wire 4.0 sq. mm

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

135 Supply, Installation, Testing and 3.00 Each 2885.57

Commissioning of suitable sweep, BEE

Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies,

shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service

Value (CMM/W) minimum 6.85, Air delivery

minimum 215 CMM, 350 RPM,230v

(tolerance as per IS : 374-2019), THD <

10%, with remote unit for Speed Control and

all remaining accessories including safety

pin, nut bolts, washers, temperature rise =

75 degree C (Max.), suitable for 140 to

Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz,

Single phase AC Supply, earthing etc.

Complete as required.[ Make shall be

approved by Engineer in Charge] (B)

mm Sweep (48")

136 Supplying and erecting 19 / 20 mm. nominal 1.00 Mtr. 108.07

bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with

necessary 24/ O.20, 3 core flexible wire with

137 Supplying & erecting fan hook box of 10 1.00 Each 108.07

mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected

concealed in Ceiling with necessary

finishing.

138 Providing Fan clamp of 30 x 5 mm flat of 1.00 Each 98.98

required length & 10 mm M.S. Bolt & Nuts

erected with necessary hook of 10 mm M.S.

Round Bar.

139 Providing 2.5mm.thick laminated acrylic 1.00 Each 18.18

sheet to cover the fan hook or Fan box.

TABLE FANS, EXHAUST FANS &

ACCESSORIES.

Supplying & erecting approved make low

noise decorative exhaust fan having size

200mm with 1350 RPM with square frame

ABS body with inbuilt lowers & square frame.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

ARMOURED ALLUMINIUM CABLES.

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench /

pipe of following size of cables

d) 4 Core 16 Sq.mm.

142 CABLE GLANDS. 2.00 Nos 47.47

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables.

d) 2 to 4 Core 16 Sq.mm

143 CABLE LUGS. 4.00 Nos 15.15

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

144 Providing and fixing printed instruction chart 1.00 Nos 130.29

both in English and Gujarati and duly framed

with front glasses, for treatment of person

suffering from Electric shock with minimum

50" diagonally size.

145 Supplying & erecting D.C.P. type fire 1.00 Ea 1712.96

extinguisher for following capacity cartridge

type with gun metal cap 150 gram CO2 gas

cartridge, powder and brackets confirming to

IS 2171 1985 and complete erected with

necessary clamps made from 50 x 6 mm M

S Flat with nuts and bolts grouted in wall

[A] For 5 Kg Capacity

146 Supplying & erecting carbon dioxide (CO2) 1.00 Ea 6591.26

fire extinguisher user of following capacity

with necessary clamps made from 50 x

mm M.S. Flat with nut & bolts grouted in wall

[A] For 4.5 Kg Capacity

147 MINIATURE CIRCUIT BREAKERS. 6.00 Nos 112.11

Miniature circuit breaker single pole 6A to

32A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA

to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

Providing & erecting 240 V MCB double pole

switch for lighting Load (B Curve) having

KA breaking capacity & confirms to IS :

in existing box having following capacity

(A) 6 to 32 Amp.

149 Providing and erecting Sheet Steel powder 1.00 Nos 1152.41

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, confirming to IS

13032 and BS 5486-1986 without MCB to

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

(A) single phase incoming and horizontal

single phase outgoing(b) sheet steel double

door (IP-43)

(iii)8 way

150 RCCB 1.00 Nos 2637.11

Providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral

415V,50Hz. having characteristic of quick

action & tripping with all advance feature &

do not incorporate any electronic component

for following Max. rating erected as directed.

(ii) 40Amps. DP

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

151 Supplying and erecting LED indoor fittings 17.00 Nos 427.23

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. &

corrosion resistance with diffuser and/or

Polycarbonate optics with company

120 to 300 V,Power Factor more than 0.9,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficiency> 85 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds /

NICHIA / SEOUL/Bridgelux(U.S.A.) make

LED used for luminaire. (Each fitting

required LM-79 & LM-80

Certificates)Square/ Circular

Surface/Recessed Mounted

Downlight/Hanging with provision for spring

loaded mounting clips complete.(ii) 11-15

watts, Surge-2 KV Cat III

152 Supplying & erecting funnel type earthing 1.00 Nos 7874.97

having earth plate of following size buried in

specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt,

20mm.dia. G.I. pipe with Funnel with a wire

mesh for watering & bricks masonry block,

C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double

Galvanised Iron / copper earth wire No

SWG bolted with lug to the plate and

covered in 12 mm dia. G.I. pipe 2.5 mtr long

complete connected to the nearest switch

gear with end socket as per direction & duly

tested by earth tester confirming to ISS (As

per drawing)with following specification.

(C) with 60 x 60x 0.315 cms. Copper earth

153 GI STRIP 5.00 Kg. 77.77

Providing and erecting required size HOT

deep Galvanised iron strip for earthing of

H.T. , OCB/ ACB/ Transformer LT panel

board, Motors etc. using proper clamp.

154 Providing and erecting Annealed bare 5.00 kg 794.87

Copper wire 8 to 16 SWG.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

155 Supplying & erecting approved make 1.00 Ea. 2355.32

Automatic liquid level controller 6A. with

sensor testing as per instruction of Engineer

in charge on site complete with wiring

connection with existing wires , with copper

conductor from pump to upper and lower

S.I.T.C. of single phase submersible pump

set suitable for 100 mm size or more dia

bore well having motor capacity and

discharge as under with necessary panel

box. Lifting and Lowering taken extra.

(a) Motor rating 1 HP (12 stage) pump

having capacity of 50 LPM at 43 to 45 mtr

head suitable for 32 mm dia. delivery pipe

157 Providing and erecting approved make 3 1.00 Nos 41725.12

Star -inverter split air-conditioning unit

consisting of copper condensing unit with fan

motor, hermetically sealed rotary

compressor with accessories etc. duly

connected separately erected evaporating

unit and blower motor with its accessories by

means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable for (

cost includes powder coated Stand, Eco

Friendly green gas charging & Remote

Control) with necessary core cutting.

1.5 TR CAPACITY

158 Supplying and erecting insulated pair of soft 5.00 Rmt. 965.56

copper tubing open or concealed including

power and control cable, necessary PVC

drain pipes for Split AC machine up to 4 TR

Supplying and installing MS angle , powder

coated / Painted standard type of wall/floor

stand mount for outdoor unit of split AC of

following capacity, erected with necessary

hardware materials as directed.

161 1.75 Per KW 46648.87

Solar Power Generation

Supply, Installation, Testing &

Commissioning of following size of Grid Tied

Solar Power Plant with Solar Panels (ALMM

approved): AS per SOR 25-26-14-1-1 details

(A) Grid Tied Solar Power System: 1 - 6 kW

(Single phase)

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

162 Supplying and Erecting Seamless Box Pipe 60.00 Per KG 131.30

of suitable size for rooftop solar installations

with good stability agaist wind, Thickness

mm and 80 micron, Hot Dipped Galvanized

steel coils. suitable arrangement for base

plate for foundation , solar panel mounting,

the structure should be suitable for carry the

load of solar panel,wiring, sprinkler system

etc. with necessary foundation work/wall

mount, j bolt, anchor fastner etc. the nut bolt

used for installtion of stucture should be (SS

304) quality.

box. pipe ref. size (A) 40 x 40 x 2mm, (B)

163 DC Cable: Electron beam cross linked 10.00 Per Mtr. 76.76

compound,UV, Ozone, Temperature &

Hydrolysis resistant Flame Retardant, Low

Smoke Excellent Encapsulation

Very long / Service life >

Standards / Material Properties:

Fire performance : IEC 60332-1-2

Smoke emission : IEC 61034/ EN 50268-2

Halogen Free: EN 50267-2-1/-2, IEC 60754-

Toxicity: EN 50305, ITC – Index <3

Ozone Resistant : EN50396

Weathering UV: HD 605/A1 or DIN

Approvals : EN 50618; H1Z2Z2-k

with suitable sized of PVC pipe(ISI Mark)

and Clamps,Shadels,Lugs.

(A) 1 core 4 sqmm copper DC cable Colour

164 (B) 1 core 4 sqmm copper DC cable Colour 10.00 Per Mtr. 76.76

165 1.75 Per KW 3852.14

Water Sprinkler System

Providing & erecting Automatic solar panel

cleaning system for solar power projects

which includes necessary plumbing work

(UPVC pipes and accessories) from source

of water to project site (upto

meters),Suitable size of sub mercible/ open

well motor, necessary wiring for motor and

sprinkler system with safety, timer circuit for

automatically on/off the sprinkler system,

necessary size oand number of nozzles/JET

(minimum 1 Nozzle/Jet per module).

(A) 1KW-5KW Cleaning System

Total Amount Rs.

Total Amount Rs.

Description of Item (with brief

It. Amount in

specification and reference to book of Quantity Unit Rate in Rs.

specifications)

Executive Engineer

Deesa Irrigation Division