REPAIR MAINTENANCE OF STREET BUILDING SECURITY LIGHT AND OTHER CONNECTED WORKS IN ZONE A RESIDENTIAL AREA UNDER GE I RnD DELHI

Amount

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in soft/loose soil for laying UG cables of various sizes complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc25 cm in any type of soil complete all as specified and directed.

Removing surplus excavated materials to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Supply and lay in trenches burnt brick sub class 'B' standard size for cable protection keeping width of the brick parallel to the length of the cable complete all as specified and as directed.

Supply and spread clean dry river sand in trenches ,ducts including leveling, punning for cushioning of cables complete all as specified and directed. Note : Punned thickness of sand cushioning shall be measured.

Supply and lay in trenches, fixed to wall / pole/ tray etc UG cable XLPE insulated armoured heavy duty electric UG cable with aluminum conductor 1100 volts grade of cross sectional area of following size complete all as specified and directed.

(a) 10 Sqmm 2 Core

(b) 16 Sqmm 4 Core

(c) 25 Sqm 3.5 Core

(d) 35 Sqm 3.5 Core

M&L in Replacement of GI bracket made of 40 mm medium grade GI pipe bend to shape approx 1.2 mtr length incl Clamp, nut, bolt, washer etc complete for fixing of street light complete all as specified and directed.

S&F Junction box SMC KIOSK box water proof of size 140x140x95 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole complete all as specified and directed.

S&F Junction box SMC KIOSK box water proof of size 300x200x125 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole complete all as specified and directed.

S&F Copper cable 2.5 Sqm 3 core PVC sheathed multi core for connection of street light inserting from top in side the pole and connecting in junction box complete including making Hole in Pole as per Site, all as directed by Engineer-in-Charge

M & L for PCC (1:2:4) type B2 using 20 mm graded stone aggregate for coping of pole around pole all as specified and as directed by Engineer-in-Charge.

S&F LED Post Top Lantern 25W wall luminaire with diffuser and painted spun aluminium deflector complete all as specified and directed.

S&F in Replacement of LED Post Top Bollard light 10 W including nesessory connnection for fixing complete all as specified and directed.

S&F in replacement of Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 45 Watt complete all as specified and directed.

S&F Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 70 Watt complete all as specified and directed.

S&F Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 90 Watt complete all as specified and directed.

S&F Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 120 Watt complete all as specified and directed.

S&F LED flood light with pressure die cast aluminium housing 100 Watt Orion 3.0 Seris completed with connection complete all as specified and directed.

S&F LED flood light with pressure die cast aluminium housing 150 Watt Orion 3.0 Seris completed with connection complete all as specified and directed.

S&F LED flood light with pressure die cast aluminium housing 200 Watt Orion 3.0 Seris completed with connection icomplete all as specified and directed.

S&F in replacement of driver for 45 W LED street light fitting of complete all as specified and directed.

S&F in replacement of driver for 70 W LED street light fitting of complete all as specified and directed.

S&F in replacement of driver for 100W LED street light fitting of complete all as specified and directed.

S&F in replacement of driver for 150W LED street light fitting of complete all as specified and directed.

S&F LED Flood Light 250 watt with pressure die cast aluminium housing complete with all accessories complete all as specified and directed. Model No. BJFL250W WHMB

S&F in replacement of GI pipe light grade 50mm dia for laying of protection of UG cable complete all as specified and directed.

S&F in replacement of GI pipe light grade 40mm dia for laying of protection of UG cable complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level connected to GI 25 x 4 mm strip by means of nuts bolts, check nut and washers of galvanised iron protected by 15 mm bore GI pipe (medium grade ) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR Part-I, 1991 complete all as specified and directed.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 25x4 mm galvanised iron strip complete all as specified and directed.

Supply and Fixing in replacement of Timer switch Astronomical type ,415 Volt three Phase of 63 Amps rating with Three Pole ML-4 contactor incl one Toggle switch for Auto, off and Manual function and incomming MCB TP internally pre wired complete and Fitted inside steel enclosure all as per site requirement and directed by engr-in-charge.

S&F in replacement service cable 1100 volts grade heavy duty PVC insulated aluminium multistranded conductor served with inner sheathing of size 10 Sqmm 2 Core complete including taling down of old burnt cable complete all as specified and directed.

Design, fabrication, assembling, wiring, supply installation, testing and commissioning in replacement of LT panel, suitable for outdoor installation, factory fabricated out of CRCA sheet steel 2mm for non-load bearing members and 3.15mm for load bearing members in cubicle formation, compartmentalized, from 3b construction & IP-65 in acc. with IEC 60529 protection, free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel, `T’ sections and / or flats wherever necessary with extensible type TPN aluminum alloy bus bars of high conductivity,DMC/SMC with supports with short circuit withstand capacity of 31 MVA for 1 sec.Panel shall have a common alluminium earth bar with 2 nos. earth stud. 3 mm thick cable gland plates shall be provided on top as well as at the bottom of the panels with anti-condensation space heater. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. 2 Nos. earthling terminals shall be provided for all distribution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system duly internal wiring with pvc insulated FRLS multistranded copper conductor cable of suitable sizeand copper thimble etc.. Lifting hooks shall also be provide din case of large panels. Approval shall be taken for panel in the form of shop drawings before fabrication. Galvanized hardware's with zinc passivation shall be used in fabrication of panels in and including of taking out old us panel complete all as specified and directed. Panel shall be consisting with following :-

M & L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for coping of pole and filling in road cuts/ hard standing complete all as specified and directed

M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate for base of foundation of pole complete all as specified and directed.

M & L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate for foundation of pole around pole complete all as specified and directed.

M&L pole painting 9.0 mtr long with a coat of aluminium paint after preparation of old painting surface by scrappining including marking of black and yellow strip not less than 30 cm width with sythethic enamelled paint from coping upto height 1.5 mtr of pole alternative way including necessary `MES & Pole number to be written in the circular yello batch on the pole complete all as specified and directed.

Supply and erection Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 09 Mtr metres long. Poles shall be painted with two coats of black bituminous paint throughout internally, and externally up to the planting depth. The remaining portion of the exterior shall be painted with one coat of red oxide primer including taking down old unserviceable pole complete all as specified and directed.

Supply and fix in replacement of 4 Pole MCCB, 400 Amp, 50 Hz, 415 V with microprosessor release based,100% ICS=100% ICU, 36 KA complete all as specified and directed.

All as per item Ser No 39.00 above but of capacity 250Amps complete all as specified and directed.

All as per item Ser No 39.00 above but of capacity 200Amps complete all as specified and directed.

Supply and fix in replacement of 4 Pole MCCB, 160 Amp, 50 Hz, 415 V with thermal magnetic release based,100% ICS=100% ICU, 25KA complete all as specified and directed.

M&L for boring of holes under road, pavement, hard standing by trenchless techonology using ultra sound technique and necessary machine including supply and laying of GI pipe pf 100 mm dia light grade complete all as specified and directed by Enginer-in-Charge

Supply and fixing of Aluminium thimble of size 10 sqmm for terminal end of cable complete all as specified and directed.

Supply and fixing of Aluminium thimble of size 16 sqmm for terminal end of cable complete all as specified and directed.

Supply and fixing of Aluminium thimble of size 25 sqmm for terminal end of cable complete all as specified and directed.

Supply and fixing of Aluminium thimble of size 35 sqmm for terminal end of cable complete all as specified and directed.

M&L for bringing cable testing van (fault locator) for detecting the location of the fault in the LT UG cable 1.1 KV of any size complete all as specifiec and directed.

M&L for Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in soft/loose soil icluding sand and burnt brick sub class 'B' standard size for making joints and laying UG cables of various sizes.(Job will be done after detection of fault in UG LT cable under schedule Item)

M&L for Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in soft/hard soil icluding sand and burnt brick sub class 'B' standard size, cutting of PCC/RCC for making joints and laying UG cables of various sizes. (Job will be done after detection of fault in UG LT cable under schedule Item)

Pradeep Bros (BID ID -3457819)

SNOWY ENGINEERING INC (BID ID -3461924)

GE WORLD (BID ID -3462108)