Suppy of Furnitures in favour of RRNMU Jalpaiguri

Purchaseing of Furnitur Video Conference related equipments for RRNMU, Jalpaiguri

Executive Table with Eru: Supplying and placing in position Main Table of the following specifications.3000 x 1050 x 740 MAIN WORKTOP :Made of 43mm Thick (±1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All edges are edge banded with matching 1mm thick veneerlipping. LEATHER PAD:Made of 18mm Thick..........Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Back unit : Supplying and placing in position Back unit Body of the following specifications.2400 x 470 x 1226 CONSTRUCTION AND MATERIAL:Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Backpanel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and .......... the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Centre Table: Supplying and placing of coffee table: Dimensions W x H X D (cm) - 90 x 40 x 90 Primary Material Subtype - Prelaminated Particle Board Finish Color - Black Net Weight (kg) - 42 Primary Material - Prelaminate Particle Board The product must have in house test certificate. Manufacturer should have Green Guard (By UL)......... is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. and factory visit is mandatory to inspect as per the requisite.

Visitor Chair: Providing, supplying and placing of Visitor Chair. SEAT /BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ...... ........ Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Side Table: Providing, supplying and placing of Corner Table: Overall Size : Width : 60cm Depth : 60cm Height : 45cmTABLE METERIALS & SIZE :TOP:Sheesham 18 mm LEGS: 80X80 Top Side 40X40 Bottom Side Support 45x25mm & 8 Pcs Bolt & Nut. Rubber wood under frame............ mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Main Table: Supplying and placing in position Main Table of the following specifications.2400 x 900 x 740 MAIN WORKTOP :Made of 43mm Thick (±1) combination of MDF .......... certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Back unit :Supplying and placing in position Back unit Body of the following specifications.2400 x 470 x 1950 CONSTRUCTION AND MATERIAL:Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), ..........is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Wardrobe: Supplying and placing of storage unit whith Pre coated Dark wood Overall Size : (W x D x H) : For 500W Main Unit : 49.8cm x 2cm x 197.8cm and one addon unit of 400 cm Wx 2cm D x 197.8 cm H... ............ certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Computer Table: Supplying and placing in position Computer Table of the following specifications. Its size shall be 1200 x 600 x 750.TABLE MATERIAL - The Table Panels are made from 18 ±0.5mm thk Pre-LaminatedExterior grade PLT ...........the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Overhead storage unit: Supplying and placing of Overhead storage unit Product Size - The Overhead storage unit consist of 1 no main and 4 nos Add-On unit type of construction with metal body........... is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Overhead storage unit: Supplying and placing of Overhead storage unit Product Size - The Overhead storage unit consist of 1no main and 5 nos Add-On unit type of construction with metal body and metal/wooden door option. It should have following sizes 300(W)mm X 328**(D)mm X 785(H)mm.............. is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Overhead storage unit: Supplying and placing of Overhead storage unit Product Size - The Overhead storage unit consist of 1 no main and 5 nos Add-On unit type of construction with metal body and metal/wooden door option. It should have following sizes 300(W)mm X 328**(D)mm X 785(H)mm..........is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

Overhead storage unit: Supplying and placing of Overhead storage unit Product Size - The Overhead storage unit consist of 1 no main and 20 nos Add-On unit type of construction with metal body and metal door option. It should have following sizes 300(W)mm X 328**(D)mm X 785(H)mm.............. is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

STORAG OPEN CABINETS: Supplying and placing of Storage OPEN SHELF Product Size - 5400(W) x 450(D) x 1950*(H) (Height of leveler is 50mm and adjustment possible should be of 15mm. ......... is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted.

SITC Of Diagonal Size 85",Panel Type 60Hz New Edge, Resolution 3,840 x 2,160 (Landscape) ,Brightness 350 (without glass), 220 (with glass), Contrast Ratio 4000:1 (Typ.),..........Antimicrobial Coating, Touch module(IR), , WiFi/BT Module Embedded, Built in Speaker(40W 4CH), External Control Touch Input,RS232C thru stereo jack, RJ45(For MDC). Safety CE, UL & BIS.Approved Make: NEC\SONY\Samsung

Mount For Display: SITC Of Mount for Display.

SITC Of 4 x 2 HDMI Matrix Switcher with Audio De-embedding, as per specifications..4 x 2 HDMI Matrix Switcher with Audio De-embedding which supports computer and video ..........1 stop bit, no parity; should support Ethernet protocol : ARP, DHCP, DNS, HTTP, HTTPS, ICMP (ping), IEEE 802.1X, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, Telnet, UDP/IP Approved Makes: Extron/ Dexon/ FSR

SITC of Full HD PTZ Camera, sensor 1/2.8" 2.41MP CMOS, Video Format HDMI:1080p 60 / 50 fps,720p 60 / 50 fps,USB:1080p 30 / 25 fps, 720p 30 / 25 fps, Video Output (HD) Interface HDMI / USB 3.0, .......... Power Consumption < 13W.Approved Make: Lumens/Sony/Panasonic.

SITC Of Wall/Ceiling mount for above camera

SITC of Cable Cubby With HDMI/USB Port

SITC of HDMI transmitter transmitting HDMI plus control and analog audio up to 230 feet (70 meters) over twisted pair; supports computer and video resolutions up to 4K ; supports data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, HD lossless a..........output (15 dBu), balanced (unweighted) , Stereo channel separation >80 dB @ 1 kHz to 20 kHztput displays.Approved Makes: Extron/ Dexon/ FSR

SITC of twisted pair receiver which Receives HDMI plus control and analog audio up to 230 feet (70 meters) over twisted pair; Support computer and video resolutions.................Frequency response of 20 Hz to 20 kHz, ±0.5 dB, THD + Noise of 0.03% @ 20 Hz to 20 kHz at maximum output, S/N of >90 dB, at maximum output (15 dBu), balanced, Stereo channel separation : >80 dB @ 1 kHz to 20 kHz.Approved Makes: Extron/ Dexon/ FSR

SITC Of HDMI To USB Converter.Approved Make: Inogeni/Extron/FSR

SITC of HDMI Cable 25 Ft

SITC of HDMI Patch Cable 6 Ft.Approved Make: Extron/Klotz/NT

SITC of USB Patch Cable 10 Meter.Approved Make: Extron/Klotz/NT

SITC of USB Patch Cable 1.8 Meter.Approved Make: Extron/Klotz/NT

SITC Of 18"Goosenecklengthwithdualflexdesign,Shouldoperatewithinthefrequencyrangeof30Hz-18kHz or better, ElementwithBackElectret-Condenser, Polar Pattern with Cardioid,LowfrequencyRoll-of with 180Hz,12dB/ octave,Impedancewith250Ω±30%(at1000Hz),OpenCircuitSensitivitywith-57dB±3dB (0dB=1V/microbar 1000Hz indicated by open circuit,Maximum Input Sound Level with 115dBSPL,1KHzat1%T.H.D.,Dynamic Range with82dB1KHzatMaxSPL,Signal-To-Noise Ratio with 61dB 1KHz at 1Pa, Operating Voltage with Phantom Power11–52VDC,2mAtypical,SwitchwithFlat,Roll-off 10dB pad(Nominal). Should be supplied with Base having ON/OFFSwitch etc.

SITC Of Digital signal processor with min. 04AEC enabled Mic/Line inputs, 04 Line outputs or better , Input channel processing should include Pre amplifier, Signal generator, .......... with Analog/Digital dynamic range of 114dB or better, Sampling rate of 48Khz or better, Frequency response of 20Hz – 20Khz or better, per channel phantom power module or better. Should be configurable thru software.

SITC Of Amplifier having 4x150W @4ohm power or better, It should be 4 channel Class D Amplifier with Volume Knobs on each channel or better, W/Ch@8Ohm 90W or better, W/Ch@4Ohm 150W or better, W/Ch@2Ohm 230W or better, W Bridge @ 8Ohm 310W or better, W Bridge @ 4 Ohm 400W or better, Frequency range : 20Hz – 20kHz or better, THD + N <0.1% or better , S/R ratio >96dB or better, Gain 28dB or better , Input Sensitivity 2.21dBu or better, Should have the following Protections : Mute On/Off, DC, Internal fuse.

SITC Of Wall Mount Loudspeaker having Low Impedance Power of min 40 W or better @ 8 Ohm, & 16W or better @70/100V. Nominal Impedance of 8 Ohm or better LF Transducer 5" Woofer or better, HF Transducer 0.5" Tweeter or better, should have Sensitivity (1W @ 1m) of 90 dB or better, SPL Max 106 dB or better with Frequency Range of 94Hz - 20 kHz or better.

SITC Of Multi-Conductor - High-Conductivity Copper Speaker Cable, Twisted Jacketed Connector, 14 AWG stranded (42x30) tinned copper conductors, PVC insulation, PVC jacket., Operating Temperature Range : -20°C To +90°C or better , NEC/(UL) Specification: CL3 or better , AWM Specification : UL Style 2587 (600 V 90°C) or better , CSA Specification : FAS90 or better, EU Directive 2011/65/EU (ROHS II) compliant or better, EU RoHS Compliance or better, Approved Makes : Belden , Klotz , Eurocable.

SITC Of Microphone Cable

SITC Of 22 AWG stranded (7x30 ) Stereo Audio / Control cable or better ,High-conductivity tinned copper conductors or better , Polypropylene insulation or better , Should have PVC jacket, Operating Temperature Range: -20°C To +75°C or better , EU Directive 2011/65/EU (ROHS II) compliant or better ,Non Plenum , Approved Makes : Belden , Extron , Eurocable.

SITC OF Shielded twisted pair cable engineered for optimum signal transmission between devices transmitting and receiving signal over twisted pair; The cable is certified to 475 MHz bandwidth at distances up to 330 feet (100 meters) and has been independently tested and verified to meet performance requirements set by the HDBaseT Alliance; the cable should be engineered and tested to exceed HDMI error rate specifications of less than one pixel per billion at 100 meters; should provide protection from outside interference and ensures high quality signal transmission; should have SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield.Approved Makes:-,Extron,Christie, RGB.

SITC OF Plug Should be provided with shielded twisted pair for devices transmitting and receiving signal over twisted pair; should be high performance Category 6A RJ-45 plug, metal strain relief and ground bonding, suitable for high EMI/RFI environments, should be compatible with TIA/EIA 568A/B wiring standards, Conductor alignment guide should reduce crosstalk and signal interference, should have Gold plated contacts. Approved Makes:-,Extron,Christie, RGB.

SITC Of 12U AV Equipment Rack ,Multi Hollow Extruded Aluminum Frames Structure across the X, Y & Z axis to give an Uninstruct bolting mechanism ( UL ) and Further reinforced with 8 Nos. of corner bracket which ensure.........care of heavy load bearing capacities are provided, Earthing Strip – Copper strip to take care .OEM Authorization Format(Tender Specific) to be attached for authenticityof the grounding,Approved Make:NT/VALRACK/WQ

Delivery, Installation, Commissioning ,Programming , User Training, schematics charges