Construction of TMS Store office Building and Transformer Plinth with overhead Gantry crane, CC Road, low height platform with shed and compound wall for Rural Division store at Falla under Jamnagar Circle.

NAME OF WORK : Construction of TMS Store Office Building and Transformer Plinth

with Overhead Gantry Crane, CC road, low height platform with shed and Compound

wall for Rural Division store at Falla under Jamnagar Circle

ITEM QTY PER RATE AMOUNT

1 Excavation for foundation up to 1.5M depth

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (B)Loose or soft soil. 58.00 Cmt 124.61

2 Excavation for foundation up to 1.5M depth

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (B) Hard or dense soil 232.00 Cmt 159.48

3 Excavation for foundation up to 1.5M depth

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (B) Hard murrum 232.00 Cmt 270.74

4 Excavation for foundation 1.5M to 3 M depth

including sorting out and stacking of useful

materials and disposing of the excavated stuff

upto 50M. Lead. (B) Hard Murrum 58.00 Cmt 291.14

5 Providing and laying cement concrete work 1:3:6

and curing complete concrete work curing and

Excluding cost of Formwork (A) Foundation and

Plinth 537.00 Cmt 3075.91

6 Filling available excavated earth ( excluding rock

) in trenches, plinth, sides of foundation etc. in

layers not exceeding 20 cm. in depth

consolidating each deposited layer by ramming

and watering. 469.80 Cmt 136.11

7 Filling in foundation and plinth with murrum or

selected soil in layers of 20 Cm. thickness

including watering ramming and consolidating

etc. complete. 5300.00 Cmt 301.58

8 Providing and laying controlled cement concrete

M-200 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in [A]

Foundation, footings, Base of columns and Mass

concrete. 366.00 Cmt 5165.36

9 Providing and laying controlled cement concrete

M-200 and curing complete including the cost of

form work and excluding reinforcement for

R.C.C work in [D] Columns. 113.00 Cmt 8852.87

10 Providing and laying controlled cement concrete

M-200 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Copings upto floor two level. 50.00 Cmt 5837.94

ITEM QTY PER RATE AMOUNT

11 Providing and laying controlled cement concrete

M-200 and curing complete including the cost of

form work and excluding reinforcement for

R.C.C work in [C] Beams. 40.00 Cmt 6879.24

12 Providing and laying controlled cement concrete

M-200 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

SLAB upto floor two level 12.00 Cu.M. 7076.88

13 Providing Thermo Mechanically treated bar F.E.

500 Steel reinforcement as per I.S. Standard for

R.C.C work including bending, binding and

placing in position complete upto floor two level. 41500.00 Kg 76.52

14 White stone bela masonry block in course in sub

structure with stone approved quality cement

mortar 1:6(1:cement, 6:coarse sand) including

packing the joints etc complete 347.00 Cmt 6231.61

15 White stone bela masonry block in course in

super structure with stone approved quality

cement mortar 1:6(1:cement, 6:coarse sand)

including packing the joints etc complete 159.00 Cmt 6517.18

16 White stone bela masonry block in partition wall

upto 15cm thickness in cement mortar

1:4(1:cement, 4:coarse sand) etc complete 30.00 Smt 689.61

17 Providing 10MM thick cement plaster in single

coat on Brick/concrete walls for interior

plastering upto floor two level finished even and

smooth in Cement Mortar 1:3 ( 1-Cement :3-

Sand ) for ceilling 54.00 Smt 137.15

18 Providing 15MM thick cement plaster in single

coat on Brick/concrete walls for interior

plastering upto floor two level finished even and

smooth in Cement Mortar 1:3 ( 1-Cement :3-

19 20MM thick sand faced cement plaster on walls

upto height 10meters above ground level

consisting of 12MM thick backing coat of

Cement Mortar 1:3 ( 1-Cement : 3-Sand ) and

8MM thick finishing coat of Cement Mortar 1:1 (

1-Cement : 1-Sand ) etc. complete. 1420.00 Smt 320.01

20 Removing and scraping of old deteriorated

plaster of any thickness from wall/RCC member

including stacking of serviceable materilas and

disposal of unserviceable from site of work with

lead and lift 10.00 Smt 20.16

ITEM QTY PER RATE AMOUNT

21 Providing and laying 24"x24" Vitrified 8mm

thick tiles in flooring over 20mm (average) base

of cement mortar 1:6 ( 1-Cement : 6-Coarse sand

) on new surface or fixing on existing flooring by

adhesive material including dismantling of

existing flooring and jointed with colour cement

slurry including finished with flush pointing and

cleaning the surface etc complete, for Light

Shade as directed by EIC. 45.00 Smt 1496.72

22 Providing and laying Vitrified tiles 8 to 10 mm

thick , in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry

23 Providing and laying coloured/designed glazed

tiles of size 300 mm x 200 mm x 8 mm / 300 mm

x 450 mm x 8 mm in skirting riser of steps and

dedo on 10 mm thick Cement Mortar 1:3 ( 1-

Cement : 3-Coarse sand ) & jointed with cement

slurry. 47.00 Smt 1508.58

24 Providing and laying Kotah stone slab 25 MM

thick in risers of steps, tread of steps, dedo and

pillars laid on 10 MM thick Cement Mortar 1:3 (

1-Cement : 3 -Coarse sand )and jointed with grey

cement slurry including necessary groove and

rubbing etc complete as directed by EIC. 5.00 Smt 1159.80

25 Providing and laying marble stone slab flooring

over 20mm (average)base of cement mortar 1:6

(1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime

putty : 1.5 - coarse sand) laid and jointed with

gray cement slurry including rubbing and

polishing complete. (A) Marble slab 25mm thick 31.00 Smt 2224.77

26 Providing and laying 20 to 25MM thick, both

faces polished Kotah stone with all edges

machine cut, 450mm to 600mm width and of

required length ( only one piece to be used ) of

approved quality for cup board shelves, wall

partition etc. including fixing the same in

masonary wall by cement mortar in three sides

including curing etc. complete as directed by

27 Providing and laying broken China Mosaic

Flooring for terrace using 12mm to 20mm broken

pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to

bring mortar crème out upto surface using white

cement including rounding off junctions and

extending them up to 15cm along the wall,

clearing with water and oxalic acid etc. as

directed by EIC. 54.00 Smt 771.98

ITEM QTY PER RATE AMOUNT

28 Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to give

an required shape even shade after thorughly

brushing the surface to remove all dirt and

remains of loose powdered materials etc.

complete 1420.00 Smt 120.93

29 Providing and applying 1 coat of approved make

of cement primer paint including scaffolding

watering etc. complete as directed by EIC. 1420.00 Smt 28.00

30 Applying two coats of birla (white cement based)

or asian or equivalent and two coats of primer of

approved brand and manufacture on new wall

surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand

papered smooth. 454.00 Smt 40.19

31 Ceiling painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall surface to give

an even shade including throughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth.- in

ceiling 54.00 Smt 91.12

32 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth.- in wall 400.00 Smt 85.52

33 Providing and fxing window having extruded

alluminium colour anodized section frame main

outer size 63.50x38.10x1.95mm of jindal section

no. 4605@ wt 1.094 kg/Rmt) Horizontal two

track member size 61.85x31.75x1.20mm vertical

member of size 61.85x31.75x1.30mm jindal

section no 8758 @ 0.659 kg/mt with sliding

shutters of horizontal member size

40x18x1.29mm vertical member of size

40x18x1.29 jindal section no 8947 @ wt of

kg/mt section 8948 @ 0.457 with 5mm thick

transparent bronze colour tinted flowat glass with

powder coated alluminium fittings and fixtures

and transparent silicon sealant glass fixing to

frame as per detailes etc. 9.00 Smt 1696.73

ITEM QTY PER RATE AMOUNT

34 Providing , Fixing & Fitting fully glazed, partly

glazed Single/Double leaf anodized aluminum

powder caoted(of approved shade) Entrance door

using extruded section fabricated by standard

manufacturers with framing 10.15x4.45cm

rectangular section with & door shutter made

from 10.15x4.45cm aluminum bottom section,

top & vertical section 15 cmx4.45cm size using

mm thick “TRIVENI” or HB4 plain/colour

glass/4 Acrylic Sheets/ 12 mm Board with

glazing deep rubber gasket with locking

arrangement of GODREJ LOCK with all fixtures

& fastening of anodized section with aluminum

beeding without floor mounted door closer etc.

completed.. Rates are with all labours and

material as per drawing and as directed. 3.00 Smt 4080.00

35 Providing & fixing powder coated anodized

aluminum partition having style & rail

63.5x38.10 of Jindal Section no @ Wt

gm/Rft)Partly penneled and partly glazed with

mm thick glass including fitting on wall or at

opening complete with rubber on all four side for

air tight fitting incl. all fixtures & fastenings with

provosion of entrace door as directed by E.I.C. 5.00 Smt 3444.00

36 Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt. 0.643 kg per

mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation 1.00 Smt 1163.92

37 Providing and fixing FRP of 28mm thick Fibre

Glass shutter with 1.5 to 2.0 mm thick fire

retardent grade FRP skin in depressed panel

design having extra reinforcement on sides &

edges & in Gel coat finish. The core of the

shutter is to be filled up with injected retardent

grade polyurethane foam done in situ alongwith

embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame

& shutter is to be water proof ,weather proof,

termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with

necessary screws & alluminium S.S. fixtures &

fastenings & fastener sleeve 6.00 Smt 1544.88

38 P&F M.S conduit pipe gate/grill gate, form

appropriate secton and M.S.flat,square bar, M.S

sheet and grouting the pvot as per drawing and

design with necessary brackets, hold fasts,

locking arrangement on top & aldrop on both the

side with three coats of approved oil painting &

one coat of red oxide primer as directed by EIC 190.00 Kg 116.20

ITEM QTY PER RATE AMOUNT

39 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of

PRINCE/SUPREME/ASTRAL/FINOLEX or

equivalent or as approved by Engineer in charge.

Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c or shall be

concealed as directed including necessary fittings

etc. Including testing of ppe and joints and fixing

the same with adhesive solvent, Including cost of

all materal (A) 15mm 10.00 Rmt 168.67

40 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of

PINCE/SUPREME/ASTRAL/FINOLEX or

equivalent or as approved by Engineer in charge.

Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c or shall be

concealed as directed including necessary fittings

etc. Including testing of ppe and joints and fixing

the same with adhesive solvent, Including cost of

all materal (A) 25mm 20.00 Rmt 251.31

41 Providing,layng and jointing in true line and level

U.P.V.C pipe line including fitting of

PRINCE/SUPREME/ASTRAL/FINOLEX or

equivalent or as approved by Engineer in charge.

Pipe shall be fixed on the wall with the help of

clamp at every two meter c/c or shall be

concealed as directed including necessary fittings

etc. Including testing of ppe and joints and fixing

the same with adhesive solvent, Including cost of

all materal (A) 32mm 125.00 Rmt 334.89

42 Providing & fixing to wall, ceilling, flooring

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6 Kg.F /cm2 working

pressure PVC pipes incl. joining with approved

solution & all fittings like bend, tee. Y bend plug

bend with water tight joints( Finolex or

equivalent )for soil waste & ventilating pipes etc.

of the following outside dia. Low density

complete with necessary fittings, wall clamps etc.

including making groove in the wall ,ceiling &

floor -75 mm dia 10.00 Rmt 168.00

43 Providing & fixing to wall, ceilling, flooring

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6 Kg.F /cm2 working

pressure PVC pipes incl. joining with approved

solution & all fittings like bend, tee. Y bend plug

bend with water tight joints( Finolex or

equivalent )for soil waste & ventilating pipes etc.

of the following outside dia. Low density

complete with necessary fittings, wall clamps etc.

including making groove in the wall ,ceiling &

floor -90 mm dia 12.00 Rmt 219.00

ITEM QTY PER RATE AMOUNT

44 Providing & fixing to wall, ceilling, flooring

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6 Kg.F /cm2 working

pressure PVC pipes incl. joining with approved

solution & all fittings like bend, tee. Y bend plug

bend with water tight joints( Finolex or

equivalent )for soil waste & ventilating pipes etc.

of the following outside dia. Low density

complete with necessary fittings, wall clamps etc.

including making groove in the wall ,ceiling &

floor - 160 mm dia 10.00 Rmt 542.00

45 Providing and fixing wash down closet

(European W.C. Pan) (Wall Mounted with

Cover) of varmora/hindware/jaquar/simpolo or

equivalent brand with integral "P" or "S" trap and

including seat and cover with brass hinges and

rubber buffersand PVC connector. including

jointing trap with soil pipe in C.M. 1:1 ( 1-

Cement : 1-Fine sand) etc.connecting cistern with

closet etc., comp. in working condition-Vitreous

in colour. with Metropolice flush vavalve and

ahnd faucet of above make. etc complete.

46 Providing and fixing Urinal of approved quality

including connecting the Urinal with waste pipe,

tap etc complete. [A] squatting plate pattern

white earthenware 550MMx300MM.. 2.00 Nos 1650.80

47 Providing and fixing wash basin (wall Mounted

or Table Top ) varmora/hindware/jaquar/simpolo

or equivalent Brand or of approved quality with

single hole for pillar tap with shanks and back

nuts with C.I. or M.S. Brackets painted white

paint including cutting holes and making good

the same including C.P. brass for waste and waste

Pipes. washbasin 600 x 450 mm. Size. with

Angular cock and pillar cock of above make. 2.00 Nos 8366.50

48 Providing and fixing Bib Cock of Jaquar or

equivalent brand with necessary other materials

and piping connections for bathroom etc.

complete or as directed. 4.00 Nos 1897.50

49 Providing and fixing Gun metal check or non-

return full-way wheel valve. [D] 32MM dia. 10.00 Nos 311.61

50 Providing & fixing PVC nahni trap of the

following nominal dia. of self cleaning design

with PVC screwed down or higher grating and

S.S. jali including cost of cutting & making good

the walls & floor 100 mm inlet & 50 mm outlet. 4.00 Nos 594.29

ITEM QTY PER RATE AMOUNT

51 Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be

not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4

mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat

cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line. (upto

52 Providing erecting fixing double coated Syntex of

Equivalent PVC ( ISI ) mark Water tank of

required capacity each with all necessary fittings

and connection etc complete on terrace as

directed by EIC. 3000.00 Ltr 3.91

53 Providing and laying interlocking Pre-Cast

Rubber Dye inter locking concrete Block 60mm

thick with grade of concrete M-200 pnumatic

compressed by mechanically pressed and as per

approved design including 75 mm sand layer for

levelling and filling the joint with sand in proper

line and level. 150.00 Smt 593.00

54 Drilling of bore well of 165 mm. dia. by machine

in all kinds of soil, sand, clay, murrum, soft rock

and hard murrum, etc., complete, truly vertical

with all equipments and labours etc., complete as

directed by E.I.C. - up to 150 Rmt. 150.00 Rmt 282.00

55 Supplying and lowering 3 H.P. Three Phase.

submersible pump of approved brand with ISI

mark 5 star rating including lowering vertically,

fitting with HDPE pipe and top clamp and

connecting cable with motor and switch board

including all necessary accessary like Nipple,

Bore Cape, Bussing, Non Return Valve Etc.

including and commissioning etc. completed. 1.00 Nos 18975.00

56 Providing, fixing & lowering heavy duty 10 KG /

CM2 P.V.C. casting pipe suitable for 165 mm dia

bore well including necessary coupling

connector, solution etc. complete as directed by

57 Providing and fixing best quality of H.D.P.E.

pipe of approved ISS quality with all accessories

fittings, jointing etc., suitable for submercible

pump lowering in bore etc., complete as directed

by E.I.C. 40 mm dia. & 10 Kg/ cm2 pipe. 155.00 Rmt 156.00

ITEM QTY PER RATE AMOUNT

58 Providing and fittings of standard swith board

with Ampere and Volt meter , fuse etc.suitable

for three phase submersible pump of 3 HP with

metal/wooden covered box with locking

arrangements and fiiting on wall as directed. 1.00 Nos 4025.00

59 Providing and fixing of cable Laxson or

equivalent brand 4 mm three core copper ISI

approved make incl. connecting with submersible

motor and with approved tap to HDPE pipe at

mt interval etc. completed.- for Three Phase 160.00 Rmt 106.00

60 Steel work, welded in built up sections framed

work including cutting, hoisting, fixing in

position and applying a priming coat of red lead

paint. (D) In trussses and trussed purlins, upto

M. span and 15 M. ovarall height. 16500.00 Kg 94.93

61 Providing & fixing hot pressed phenol bonded,

exterior type solid flush door 30mm shutter made

by approved brand & as per I.S.I. standard with

water resisting plywood facing and 1mm thick

laminated sheet on both side of door & teak wood

leaping all-round .If necessary with glass looking

window with T.W. batten and polishing /Colour

.Rates are with fixtures & fastening also with

NO. of 100mm. long butt or parliamentary hinges

on each flap of double shutter & 150mm. long

hinges for single shutter., complete as per

drawing & as directed by E.I.C. 5.00 Sq.M 3933.00

62 Providing and fixing concertina coil fecing with

punched tape concertina coil 600mm dia 10meter

openable length (total 90mt) having 50nos round

per 6 mtr length, upto 3 mtr height of wall

existing angle iron "Y" shaped placed 2.4 mt to

3mt apart with 9 horizontal R.B.T. reinforced

barbed wire stud tied with GI staples and GI clips

retain horizontal, including necessary bolts or GI

barbed wire tied to angle iron, all complete as per

direction of EIC with reinforced barbed tape

(RBT) spring core (25mm thcik) wire of high

tensile strength of 165 (cost of MS angle, CC

block shall be paid separetely) 245.00 Rmt 282.00

ITEM QTY PER RATE AMOUNT

63 Fabricating & assembling, of Wire Rope Hoist,

3 Ton Single Girder Gantry Crane with Twin

Drive arrangement & Electric Wire Rope Hoist as

per IS: 3177 & IS: 807. Including Third (LD)

drive electrical arrangement only Harden gear

with standard ratio, to full fill standard speed,

providing non-metallic cone to prevent rain

water. Capacity 3 Ton, Span 15 mtrs. Height

mtrs, Class II & Medium Hoisting Speed

mpm, C. T. Speed 12 - 15 mpm, L. T. Speed 18 -

20 mpm No. of Falls - 2 falls, Wire Rope Dia Ø

12 mm, Control Voltage 110 V Supply Voltage

415 V, 3 Ph AC supply, Operation Floor operated

pendant push button Station With brack system

including all kind of materials & labour,

transport, coloring, etc completed. 2.00 Job 172040.00

64 Providing & fixing of 3 phase electrical motor

2hp, Station make including all kind of materials

& labour etc completed 4.00 Nos 11615.00

65 Preparation of Crain Cross travel rotating

assembly including En 19 shaft, En 8 Roller with

groove, standard bearing, lock pin gear box & all

kind of materials & labour, transport, coloring,

etc completed. 8.00 Set 12436.00

66 Providing, fixing and fabrication of Base plate for

supporting girder column of Size: 700x

550mmx16mm Tk over RCC foundation

including 4 nos of 20mm dia hole, with all kind

of materials & labour, transport, coloring, etc

completed as per EIC 50.00 Nos 4552.00

67 Providing, fixing and fabrication of TOP plate of

Size: 500x 300mmx12mm Tk for supporting

girder column over RCC foundation including

welding with coloum and all kind of materials &

labour, transport, coloring, etc completed as per

68 Providing, fixing and fabrication of straining

welding of Size: Square Bar 40mm at 6 m height

for guide support for travelling of Bridge Beam,

including of materials & labour, transport,

coloring, etc completed as per EIC 196.00 Rmt 1493.00

69 Providing & Laying of Wire rope for supporting

of Electrical cable, including Fixing with

coloring, labour, transport etc completed as per 147.00 Rmt 261.00

70 Providing & Laying of Electrical cable, 4 core

with non-metallic clamp make standard 2.5mm

Tk, including Fixing with coloring, labour,

transport etc completed as per EIC 147.00 Rmt 145.00

71 Providing, fixing and fabrication of ISMB 600 X

210 Station at 6 Meter height for Main Bridge

Beam including all kind of material, labour,

transport, coloring, etc completed. 40.00 Rmt 14452.00

ITEM QTY PER RATE AMOUNT

72 Providing & fixing, Laying frame for rotating

assembly of ISMC 200 X 75 at 5 Meter height for

End Truck to support Bridge Beam & Rotating

including all kind of material, labour, transport,

coloring, etc 20.00 Rmt 3619.00

73 Labor charges for Fabrication of Ms girders

Colum (I Beam) Welding with Ms angle, Top &

Bottom plate & braising including cutting

bending as director by EIC, Including Oil

painting. All required main structural (Girders,

Channels , Angle , Flar & Round Bars) material

will be provide by PGVCL other then mention.

All mescaline's items like bolt, nut, welding rod

etc will be Provide by contractor. 50.00 Nos 2220.00

74 Labor charges for erection by Crain of Ms girders

Colum over RCC Foundation Column including

Nut Bolting with Base Plate rigidly with good

engineering practice 50.00 Nos 3565.00

75 Labor charges for Fabrication of Ms Runway

beam. Welding with top plate of MS Girders (I

Beam) in full length of yard , including cutting

welding with Ms girders pole as director by EIC,

Including Oil painting. All required main

structural (Girders, Channels , Angle , Flat &

Round Bars) material will be provide by PGVCL.

All mescaline's items like bolt, nut, welding rod

etc will be Provide by contractor. 196.00 Rmt 172.00

76 Labor charges for erection by Crain of Ran Way

Beam on Ms girder Colum including Nut

Bolting/ Welding with top Plate rigidly with

good engineering practice All mescaline's items

like bolt, nut, welding rod etc will be Provide by

contractor. 196.00 Rmt 197.00

77 Labor charges for Fabrication of Ms Base for

Bridge drive motor (2HP) each side Welding

with MS Girders (I Beam) cutting welding with

Ms girders pole as director by EIC, Including Oil

painting. All required main structural (Girders,

Channels , Angle , Flat & Round Bars) material

will be provide by PGVCL . All mescaline's

items like bolt, nut, welding rod etc will be

Provide by contractor. 4.00 Nos 1597.00

78 Labor charges for Fabrication of Support

structure for Bridge to Fabrication in way to

reduce Vibration of Bridge Beam. MS Main

bridge beam with cutting Welding as director by

EIC, Including Oil painting. All required main

structural (Girders, Channels , Angle , Flat &

Round Bars) material will be provide by PGVCL

. All mescaline's items like bolt, nut, welding rod

etc will be Provide by contractor. 3.00 Set 4598.00

ITEM QTY PER RATE AMOUNT

79 Constructing 125 mm thick Controlled cement

concrete M- 200 Grade with Trimix with power

trowling sheet form work with M.S. channels,

srinking of fair hardness, Non oxidzing, Non

metalic, heavy duty floor hardner of FOSROC or

equivalent at the rate of 0.5 Kg./Sq.M. with

mm x 10 mm size groove cutting in concrete as

constructution joint with necessary equipments,

labors as per design etc. Complete. 1490.00 Sq.M 676.00

80 Providing semi corrugated colored G.I. sheets

roofing fixed with galvanized iron J or L hooks,

bolts and nuts 8mm diameter with bitumen ancl

G.L iimpet compiete excluding the cosi

of,purling, rafters and trusses.(1) 0.50 mm thick

sheet 680.00 Sq.M 628.00

81 Providing & Fixing and laying of J bolt with nut

with necessary rounds of 16 mm dia 750 mm

length anchored in cment concrete for fixing of

top plate for girder colum etc complete. 200.00 Nos 143.00

82 Supplying of graded stone of following size (For

WBM road) (2)Crushed stone aggregate 40 to

mm size lead upto 5 km. 230.00 Cmt 609.54

83 Spreading the stone aggregate for rolling and

W.B.M. including filling the interstices to

required camber and gradient (excluding

spreading of Blindage)(ii) 40mm to 63mm size 230.00 Cmt 265.83

84 Supplying of crushed stone aggregate, chippings

etc of hard stone of following nominal size free

of disintegrated pieces deletarios and organic

metter (for bitume surface dressing etc) and

grading as per IRC (v) 12 mm lead upto 5 km 224.00 Cmt 644.45

85 Supplying of crushed stone aggregate, chippings

etc of hard stone of following nominal size free

of disintegrated pieces deletarios and organic

metter (for bitume surface dressing etc) and

grading as per IRC (v) 6 mm lead upto 5 km 224.00 Cmt 445.70

86 Spreading the stone aggregate for rolling and

W.B.M. including filling the interstices to

required camber and gradient (excluding

spreading of Blindage)(iv) 6mm to 25mm size

aggreagates 448.00 Cmt 265.83

87 Rolling and consolidating water bound macadam

(except laterite and Kankar) including watering

not exceeding 150mm thickness (Main layer

including binding materials ) including filling in

depressions which occur during the process.(A)

With power roller exceeding 8 tonne and not

exceeding 12 tonne. 1490.00 Sq.M 20.99

Estimated Cost Sectoin-I (CIVIL WORKS) in Rs.

ITEM QTY PER RATE AMOUNT

88 Point wiring for light /fan /bell / primary point

with 2-1.0 sq. mm & earth wire of 1.0 sq. mm

(green) both are of .ISI marked FR PVC insulated

multistoried copper wires , in existing pipe Duty

erected, complete with 6A tissino Type ISI

marked flues type switch / bell push and

accessories erected on polished wooden block /

Metal / PVC box covered with 3 mm thick

laminated sheet. As per (b) for Concealed

Wiring. 70.00 NOS 412.00

89 Point wiring for independent PLUG with 2-1.0

sq.mm & earth wire of 1.0 sq.mm(green) both are

of ISI marked FR PVC insulated multistoried

copper wires ,in existing pipe duly erected

complete with ISI marked 3 pin 6A socket and

6A tissino type switch erected with wrath

continuity connection erected on polished board

block / Metal/PVC box covered with 3 mm thick

laminated sheet .as per 30.00 NOS 380.00

90 Providing and erecting 1.5 mm thick FIA

approved and ISI mark (embossed) RIGID PVC

PIPES of following size complete erected with

necessary PVC fittings & Clamps with following

type of erection.20 mm 400.00 Rmt 177.00

91 Supplying & executing Delton or approved make

Telephone Cable electrolytic grade annealed

copper conductor insulated with PE insulation

twisted in to pairs with color combination

bunched together in concentric layer so as to

minimizes cross talk & wrapped with FR PVC

tape & sheathed with FR PVC or HFFR outer

Jacket suitable for indoor tale phone writing &

confirming to C-DOT S/WS-113/ IEC 60189-2

UL – 1581 SECTION 1080 VW-1 erected in

existing pipe of following size of conductors &

non. of pairs With Necessary Connection . as per

2) Two Pairs 50.00 mit 50.00

92 Providing & Erecting following Shockproof

tissino type accessories erected on 3 mm thick

laminated sheet in wooden/PVC Metal Box

.erected on wall/ ceiling.as per (5) One No Single

Pole 16 A Switch & One no 6/16 A Universal

Socket Combined 3.00 NOS 125.00

93 Call bell/buzzer , 250 volts, complete erected on

existing polished wooden block or 3 mm. thick

laminated sheet. 2.00 NOS 80.00

94 Approval make C.F.L. lamp Retrofit 3/15/18

Watt Cat.III 5.00 NOS 210.00

95 Providing Approved make Tripple pole Cast Iron

Clad Switch & rewirable Fuse with neutral link

415 /500 V confirming to I.S.S.(b) 32 A Cal- III

ITEM QTY PER RATE AMOUNT

96 Providing & erecting 415VMCB double pole

switch for motor & inductive Load (C Curve)

having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following

capacity (A) 6 to 32 Amp. Cat – III 20.00 NOS 490.00

97 Approved make ELCBs/RCCBs conforming to

IS: 12640 and having sensitivity of 6 mA and

Short Circuit withstand capacity of 6 KA and

suitable for operation on single Phase 240. V .

having charectorstic of quick action & tripping

with all advance feature & do not incorporate any

electronic component for foolowing Max . rating

98 Supplying & erecting funnel type earthing having

earth place of following size burrid in specifically

prepared earth pit 3 mtr. Below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt ,20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover Complete as per para 7.3 of IS

3043 with necessary length of double G.1/ copper

earth wire No 6 SWG bolted with lug to the plate

and covered in 12mm dia.G.I. pipe 2.5 mtr long

complete connected to the nearest switch gear

with tester confirming to ISS (AS per

drawing)with following specification 1.00 NOS 12000.00

99 Approved make Power Saving BLDC Ceiling

Fan with condenser 230 volt A.C. 50 Cys.

mm sweep complete having 3blades with

aluminium blades with , campy & 30 cms ,down

rod erected with 24/0.2 flat 3 core flexible wire

with earthing. (Havells,Crompton,Anchor,Bajaj

Make) 8.00 NOS 3450.00

100 Supporting & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced though a

Gauge M.S. box / Heavy Duty PVC box having

depth of 75 mm complete erected concealed in

ceiling with necessary finishing. 8.00 NOS 150.00

101 Providing 2.5 mm laminated sheet to cover the

fan hook or Fan box. 8.00 NOS 25.00

102 providing and erecting of TFT tub lights,20 watt, 8.00 NOS 475.00

103 providing and erecting of LED lights in

Chambers asper instruction of Engineer in 10.00 NOS 850.00

104 providing and erecting of exhaust fan,12 mm

make :cromplton graves ltd 2.00 NOS 1550.00

105 providing and erecting of distribution box (fuse

box)with MCCB-ELCB for distributing power. 1.00 NOS 2700.00

ITEM QTY PER RATE AMOUNT

106 Providing and erecting, heavy duty flood light

integral luminaire comprises die cast aluminium

body with heat resistant toughened front glass,

silicon rubber gasket,anodised reflector hot deep

powder coated cradle clamp with suitable size of

necessary built in control gear complete with

lamp. With one no. 250 watt LED flood light. 40.00 Nos 4800.00

Estimated Cost Sectoin-II (ELECTRICAL WORKS) in Rs.

Total Estimated Cost Section [ A = I +II ] in Rs …

Bidder's offer [B]

GRAND TOTAL [C = A +/- A*B ]

GRAND TOTAL [C = A +/- A*B ]

GST (CGST __% + SGST __%) [ D = C * GST% ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

Final offer in Rs.

Chief Engineer (Material)

PGVCL, Corporate Office, Rajkot